Showing posts with tag: Ductile Iron

Flanged Wye – AWWA C110, DI (in)

Pipe SizeKLApprox. Weight (lb)
RunBranch
4 4 6 1/2 3 50
6 4 8 3 1/2 75
6 6 8 3 1/2 85
8 6 9 4 1/2 135
8 8 9 4 1/2 125
10 6 8 5 140
10 8 9 5 155
10 10 11 5 220
12 8 9 5 1/2 210
12 10 11 5 1/2 240
12 12 12 5 1/2 315
16 16 15 6 1/2 520
  • Flanged wye fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
by
Tags: , , , , , , , , ,

Flanged Lateral – AWWA C110, DI (in)

Pipe SizeFGApprox. Weight (lb)
RunBranch
3 3 10 3 50
4 3 12 3 70
4 4 12 3 75
6 4 14 1/2 3 1/2 105
6 6 14 1/2 3 1/2 130
8 4 17 1/2 4 1/2 153
8 6 17 1/2 4 1/2 190
8 8 17 1/2 4 1/2 200
10 4 20 1/2 5 230
10 6 20 1/2 5 290
10 8 20 1/2 5 335
10 10 20 1/2 5 300
12 4 24 1/2 5 1/2 355
12 6 24 1/2 5 1/2 370
12 8 24 1/2 5 1/2 395
12 10 24 1/2 5 1/2 420
12 12 24 1/2 5 1/2 460
14 6 27 6 500
14 8 27 6 525
14 10 27 6 555
14 12 27 6 600
14 14 27 6 640
16 6 30 6 1/2 655
16 8 30 6 1/2 680
16 10 30 6 1/2 715
16 12 30 6 1/2 755
16 14 30 6 1/2 800
16 16 30 6 1/2 850
18 8 32 7 820
18 10 32 7 855
18 12 32 7 1005
18 14 32 7 940
18 16 32 7 990
18 18 32 7 1035
20 10 35 8 1095
20 12 35 8 1130
20 14 35 8 1170
20 16 35 8 1220
20 20 35 8 1345
24 24 40 1/2 9 2020
36 36 60 19 1/2 5740
  • Flanged lateral fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
by
Tags: , , , , , , , , ,

Flanged Flares – AWWA C110, DI (in)

Flange and Flare 90° Elbow 
Run SizeMNPApprox. Weight (lb)
3 7.5 5.5 8.5 25
4 9 6.5 9.5 40
6 11 8 12 75
8 13.5 9 13 110
10 16 11 15 170
12 19 12 16 255
14 21 14 22 450
16 23.5 15 23 545
18 25 16.5 24.5 675
20 27.5 18 26 860
24 32 22 30 1195
30 38.8 25 38 2070
36 48 28 38 2900
Flange and Flare Piece
Run SizeRSApprox. Weight (lb)
3 7.25 8 20
4 9 8 30
6 11 8 45
8 13.5 10 75
10 16 10 115
12 19 12 155
14 21 16 225
16 23.5 16 330
18 25 16 355
20 27.5 18 465
24 32 18 600
30 38.75 24 900
36 46 24 1200
  • Flanged flare fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
by
Tags: , , , , , , , , , ,

Flanged Reducer – Concentric and Eccentric, AWWA C110, DI (in)

 Concentric Reducer
Pipe SizeEApprox. Weight (lb)
PSPS1
3 2 6 17
4 2 7 23
4 3 7 29
6 2 9 30
6 3 9 44
6 4 9 46
6 5 9 55
8 3 11 60
8 4 11 65
8 5 11 70
8 6 11 75
10 4 12 100
10 6 12 110
10 8 12 115
12 4 14 120
12 6 14 130
12 8 14 185
12 10 14 180
14 6 16 165
14 8 16 185
14 10 16 205
14 12 16 235
16 6 18 210
16 8 18 230
16 10 18 255
16 12 18 285
18 8 19 265
18 10 19 290
18 12 19 320
18 14 19 350
18 16 19 405
20 10 20 420
20 12 20 465
20 14 20 430
20 16 20 445
20 18 20 470
24 12 24 610
24 14 24 565
24 16 24 610
24 18 24 645
24 20 24 695
30 16 30 945
30 18 30 970
30 20 30 1145
30 24 30 1155
42 24 42 1810
42 30 42 2060
42 36 42 2345
48 30 48 2615
48 36 48 2940
48 42 48 3320
4 3 7 30
6 3 9 45
6 4 9 55
8 4 11 70
8 6 11 80
10 4 12 95
10 6 12 100
10 8 12 125
12 4 14 120
12 6 14 135
12 8 14 150
12 10 14 180
14 6 16 165
14 8 16 185
14 10 16 205
14 12 16 295
16 6 18 210
16 8 18 230
16 10 18 255
16 12 18 285
16 14 18 315
18 8 19 265
18 10 19 290
18 12 19 305
18 14 19 350
18 16 19 385
20 10 20 350
20 12 20 370
20 14 20 400
20 16 20 450
20 18 20 455
24 12 24 535
24 14 24 570
24 16 24 615
24 18 24 645
24 20 24 695
30 16 30 780
30 18 30 810
30 20 30 870
30 24 30 970
36 24 36 1425
36 30 36 2120
42 24 42 2340
42 30 42 2060
42 36 42 2345
48 30 48 2625
48 36 48 2950
48 42 48 3320
Pipe SizeEApprox. Weight (lb)
PSPS1
  • *  Flanged eccentric reducer fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
by
Tags: , , , , , , , , , ,

Flanged Bends and Tees with Base – AWWA C110, DI (in)

Pipe SizeTUVApprox. Weight (lb)
90°LR 90°Tee
3 4.88 5.00 0.50 38 41 47
4 5.50 6.00 0.50 50 60 75
6 7.00 7.00 0.62 85 100 115
8 8.38 9.00 0.88 145 180 195
10 9.75 9.00 0.88 210 315 315
12 11.25 11.00 1.00 300 430 450
14 12.50 11.00 1.00 400 580 570
16 13.75 11.00 1.00 505 740 710
18 15.00 13.50 1.12 645 – 900
20 16.00 13.50 1.12 805 – 1125
24 18.50 13.50 1.12 1215 – 1930
30 23.00 16.00 1.15 1945 – –
36 26.00 16.00 1.15 2395 2895 –
 Pipe SizeTUVApprox. Weight (lb)
4 x 3 5.50 6 0.50 45
6 x 4 7.00 7 0.62 75
8 x 4 8.38 9 0.88 120
8 x 6 8.38 9 0.88 135
10 x 6 9.75 9 0.88 175
10 x 8 9.75 9 0.88 185
12 x 6 11.25 11 1.00 230
12 x 8 11.25 11 1.00 255
12 x 10 11.25 11 1.00 285
Base Bolt Drilling
Pipe SizeBolt CircleBolt Hole Dia.No. of Bolt Holes
3 3.88 5/8 4
4 4.75 3/4 4
6 5.50 3/4 4
8 7.50 3/4 4
10 7.50 3/4 4
12 9.50 7/8 4
14 9.50 7/8 4
16 9.50 7/8 4
18 11.75 7/8 4
20 11.75 7/8 4
24 11.75 7/8 4
30 14.25 1 4
36 17.00 1 4
42 21.25 1 1/4 4
48 22.75 1 1/4 4
  • *  Flanged fitting base for bends are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • These fittings are not included in ANSI/AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
v
by
Tags: , , , , , , , , , ,

Flanged Bends – Reducing, AWWA C110, DI (in)

SizeHApprox. Weight (lb)
4 x 3 6 1/2 35
6 x 4 8 65
8 x 4 9 90
8 x 6 9 100
10 x 6 11 125
10 x 8 10 150
12 x 6 12 175
12 x 8 12 190
12 x 10 12 220
14 x 6 14 230
14 x 8 14 240
  • Flanged reducing bend fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
by
Tags: , , , , , , , , ,

Flanged Bends – Long Radius, AWWA C110, DI (in)

 SizeRJApprox. Weight (lb)
3 6.25 7 3/4 30
4 7 9 45
6 9.5 11 1/2 85
8 14 14 140
10 16.5 16 1/2 255
12 17 19 310
14 19 21 1/2 475
16 21.5 24 630
18 – 26 1/2 840
20 – 29 1080
24 – 34 1640
  • Flanged long radius bend fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
by
Tags: , , , , , , , , ,

Mechanical Joint Tapped Tees – Full Body, AWWA C110, DI (in)

 Pipe SizeDimension (in)Approx. Weight (lb)
HMax. Tap
3 8 2 40
4 8 2 50
6 8 2 75
8 8 2 105
10 8 2 130
12 8 2 180
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
by
Tags: , , , , , , , ,

Mechanical Joint Tees – Full Body, AWWA C110, DI (in)

Pipe Size Dimensions (in) Approx. Weight (lb) MJ
RUN (E) Branch (F) RUN (G)
* 2x2x2 3.25 3.25 – 21
* 3x3x2 3.25 3.25 – 45
3x3x3 5.5 5.5 13.5 58
* 4x4x2 4.8 4.8 14.5 68
4x4x3 6.5 6.5 14.5 77
4x4x4 6.5 6.5 14.5 78
4x4x6 8 8 – 112
* 6x6x2 8 8 – 78
6x6x3 8 8 16 112
6x6x4 8 8 16 110
6x6x6 8 8 16 119
6x6x8 9 9 – 158
8x8x3 9 9 17 155
8x8x4 9 9 17 157
8x8x6 9 9 17 175
8x8x8 9 9 17 199
10x10x4 11 11 19 –
10x10x6 11 11 19 258
10x10x8 11 11 19 268
10x10x10 11 11 19 300
12x12x4 12 12 20 318
12x12x6 12 12 20 325
12x12x8 12 12 20 335
12x12x10 12 12 20 392
12x12x12 12 12 20 396
14x14x12 14 14 22 540
14x14x14 14 14 22 585
* 16x16x4 15 15 23 600
16x16x6 15 15 23 615
16x16x8 15 15 23 625
16x16x10 15 15 23 645
16x16x12 15 15 23 660
16x16x16 15 15 23 740
18x18x6 13 15.5 – 710
18x18x8 13 15.5 – 674
18x18x12 13 15.5 – 749
18x18x18 16.5 16.5 – 945
20x20x6 14 17 – 849
20x20x8 14 17 – 892
20x20x12 14 17 – 896
20x20x16 18 18 – 1095
20x20x20 18 18 – 1258
24x24x6 15 19 – 1233
24x24x8 15 19 – 1234
24x24x12 15 19 – 1256
24x24x14 15 19 – 1220
24x24x16 15 19 – 1245
24x24x18 22 22 – 1735
24x24x20 22 22 – 1720
24x24x24 22 22 – 1947
30x30x6 18 23 – 2050
30x30x8 18 23 – 2060
30x30x10 18 23 – 2075
30x30x12 18 23 – 2090
30x30x16 18 23 – 2145
30x30x18 18 23 – 2170
30x30x20 18 23 – 2205
30x30x24 25 25 – 2880
30x30x30 25 25 – 2275
36x36x6 20 26 – 2439
36x36x8 20 26 – 2444
36x36x10 20 26 – 2535
36x36x12 20 26 – 2541
36x36x14 20 26 – 2570
36x36x16 20 26 – 2585
36x36x18 20 26 – 2610
36x36x20 20 26 – 2635
36x36x24 20 26 – 2792
36x36x30 28 28 – 3545
36x36x36 28 28 – 3450
42x42x24 23 30 – 3690
42x42x30 31 31 – 4650
42x42x36 31 31 – 4880
42x42x42 31 31 – 6320
48x48x24 26 34 – 4995
48x48x30 26 34 – 5140
48x48x36 34 34 – 6280
48x48x42 34 34 – 8130
48x48x48 34 34 – 8420
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint Dimensions – Full Body, AWWA C110, DI (in)

 Pipe SizeABCDF1/3XJK1K2LMNOPS
# 2 2.50 2.50 3.39 3.50 2.61 28° 3/4 4.75 6.25 6.25 0.75 0.62 1.12 0.31 0.63 0.52
3 3.96 2.50 4.84 4.94 4.06 28° 3/4 6.19 7.69 7.69 0.94 0.62 1.37 0.31 0.63 0.52
4 4.80 2.50 5.92 6.02 4.90 28° 7/8 7.50 9.12 9.12 1.00 0.75 1.50 0.31 0.75 0.65
6 6.90 2.50 8.02 8.12 7.00 28° 7/8 9.50 11.12 11.12 1.06 0.88 1.63 0.31 0.75 0.70
8 9.05 2.50 10.17 10.27 9.15 28° 7/8 11.75 13.37 13.37 1.12 1.00 1.75 0.31 0.75 0.75
10 11.10 2.50 12.22 12.34 11.20 28° 7/8 14.00 15.69 15.62 1.19 1.00 1.75 0.31 0.75 0.80
12 13.20 2.50 14.32 14.44 13.30 28° 7/8 16.25 17.94 17.88 1.25 1.00 1.75 0.31 0.75 0.85
14 15.30 3.50 16.40 16.54 15.44 28° 7/8 18.75 20.31 20.25 1.31 1.25 2.00 0.31 0.75 0.89
16 17.40 3.50 18.50 18.64 17.54 28° 7/8 21.00 22.56 22.50 1.38 1.31 2.06 0.31 0.75 0.97
18 19.50 3.50 20.60 20.74 19.64 28° 7/8 23.25 24.83 24.75 1.44 1.38 2.13 0.31 0.75 1.05
20 21.60 3.50 22.70 22.84 21.74 28° 7/8 25.50 27.08 27.00 1.50 1.44 2.19 0.31 0.75 1.12
24 25.80 3.50 26.90 27.04 25.94 28° 7/8 30.00 31.58 31.50 1.62 1.56 2.31 0.31 0.75 1.22
30 32.00 4.00 33.29 33.46 32.17 20° 1 1/8 36.88 39.12 39.12 1.81 2.00 2.75 0.38 1.00 1.50
36 38.30 4.00 39.59 39.76 38.47 20° 1 1/8 43.75 46.00 46.00 2.00 2.00 2.75 0.38 1.00 1.80
42 44.50 4.00 45.79 45.96 44.67 20° 1 1/8 50.62 53.12 53.12 2.00 2.00 2.75 0.38 1.00 1.95
48 50.80 4.00 52.09 52.26 50.97 20° 1 1/8 57.50 60.00 60.00 2.00 2.00 2.75 0.38 1.00 2.20
# 2 2 5/8 3 45 – 60 5 2.50
3 4 5/8 3 45 – 60 7 3.96
4 4 3/4 3 1/2 75 -90 10 4.80
6 6 3/4 3 1/2 75 -90 16 6.90
8 6 3/4 4 75 -90 25 9.05
10 8 3/4 4 75 -90 30 11.10
12 8 3/4 4 75 -90 40 13.20
14 10 3/4 4 1/2 75 -90 45 15.30
16 12 3/4 4 1/2 75 -90 55 17.40
18 12 3/4 4 1/2 75 -90 65 19.50
20 14 3/4 4 1/2 75 -90 85 21.60
24 16 3/4 5 75 -90 105 25.80
30 20 1 6 100 -120 220 32.00
36 24 1 6 100 -120 301 38.30
42 28 1 1/4 6 1/2 100 -120 389 44.50
48 32 1 1/4 6 1/2 100 -120 477 50.80
  • *  These fittings are not included in AWWA C110/A21.10
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
by
Tags: , , , , , , , ,
error: Copy is disabled