Showing posts with tag: Ductile Iron

Mechanical Joint Crosses – Full Body, AWWA C110, DI (in)

Pipe SizeDimensions (in)Approx. Weight (lb)
RunBranchJKMJ*  MJ x FLG
6 6 8.0 8.0 160 141
8 4 9.0 9.0 185 –
8 6 9.0 9.0 205 182
8 8 9.0 9.0 255 245
10 6 11.0 10.0 285 –
10 8 11.0 11.0 310 –
10 10 11.0 11.0 380 360
12 6 12.0 12.0 361 367
12 8 12.0 12.0 371 373
12 12 12.0 12.0 486 487
14 8 14.0 14.0 550 –
14 14 14.0 14.0 779 –
16 6 15.0 15.0 650 –
16 8 15.0 15.0 675 655
16 16 15.0 15.0 895 875
18 8 13.0 15.5 775 –
18 10 13.0 15.5 760 –
18 12 13.0 15.5 860 –
18 18 16.5 16.5 1140 –
20 8 14.0 17.0 951 –
20 12 14.0 17.0 977 –
20 16 18.0 18.0 1245 –
20 20 18.0 18.0 1440 –
24 8 15.0 19.0 1244 –
24 12 15.0 19.0 1326 –
24 16 15.0 19.0 1479 –
24 20 22.0 22.0 1965 –
24 24 22.0 22.0 2192 –
30 6 18.0 23.0 2085 –
30 12 18.0 23.0 2165 –
30 24 25.0 25.0 3180 –
30 30 25.0 25.0 3640 –
36 24 20.0 26.0 2910 –
36 36 28.0 28.0 4370 –
42 42 31.0 31.0 7145 –
48 24 26.0 34.0 5210 –
48 36 34.0 34.0 6790 –
48 48 34.0 34.0 9380 –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint 90 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RABMJ x MJMJ x PEMJ x FLG
*  2 2.25 3.25 – 16 – –
3 4.0 5.5 13.5 26 36 –
4 4.5 6.5 14.5 56 53 51
6 6.0 8.0 16.0 88 80 75
8 7.0 9.0 17.0 123 119 118
10 9.0 11.0 19.0 189 181 168
12 10.0 12.0 20.0 268 252 288
14 11.5 14.0 22.0 380 – –
16 12.5 15.0 23.0 552 470 465
18 14.0 16.5 24.5 625 600 577
20 15.5 18.0 26.0 862 775 –
24 18.5 22.0 30.0 1423 1301 1150
30 21.5 25.0 33.0 1942 1920 –
36 24.5 28.0 36.0 2629 2310 –
42 27.5 31.0 – 3410 – –
48 30.5 34.0 – 4595 – –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , ,

Mechanical Joint 45 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
*  2 1.96 1.8 – 16 – –
3 3.62 3.0 11.0 30 – –
4 4.81 4.0 12.0 53 48 45
6 7.25 5.0 13.0 77 60 69
8 8.44 5.5 13.5 110 107 111
10 10.88 6.5 14.5 172 168 167
12 13.25 7.5 15.5 222 215 218
14 12.06 7.5 15.5 311 – –
16 13.25 8.0 16.0 364 360 360
18 14.50 8.5 16.5 531 430 455
20 16.88 9.5 17.5 655 543 664
24 18.12 11.0 19.0 865 1099 825
30 27.75 15.0 23.0 1447 – 1510
36 35.00 18.0 26.0 2435 – 1930
42 42.25 21.0 – 2955 – –
48 49.50 24.0 – 4080 – –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint 22 1/2 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
3 7.56 3.0 11.0 30 – –
4 10.06 4.0 12.0 52 – –
6 15.06 5.0 13.0 77 71 70
8 17.62 5.5 13.5 110 107 109
10 22.62 6.5 14.5 156 155 163
12 27.62 7.5 15.5 221 215 224
14 25.12 7.5 15.5 300 – –
16 27.62 8.0 16.0 391 315 365
18 30.19 8.5 16.5 527 422 455
20 35.19 9.5 17.5 611 – 575
24 37.69 11.0 19.0 986 800 930
30 57.81 15.0 23.0 1898 – 1540
36 72.88 18.0 26.0 2372 – 1970
42 88.00 21.0 – 3020 – –
48 103.06 24.0 – 4170 – –
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint 11 1/4 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
3 15.25 3.0 11.0 30 – –
4 20.31 4.0 12.0 52 – –
6 30.50 5.0 13.0 65 71 –
8 35.50 5.5 13.5 104 105 –
10 45.69 6.5 14.5 171 – –
12 55.81 7.5 15.5 221 215 –
14 50.75 7.5 15.5 305 – –
16 55.81 8.0 16.0 391 367 –
18 60.94 8.5 16.5 525 422 –
20 71.06 9.5 17.5 605 – –
24 76.12 11.0 19.0 996 800 972
30 116.75 15.0 23.0 1410 – 1305
36 147.25 18.0 26.0 2397 – 2185
42 177.69 21.0 – 3035 – –
48 208.12 24.0 – 4190 – –
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,
error: Copy is disabled