| category |
word |
Define |
| GENERAL |
ACCURATE |
Without error within tolerances allowed, precise, correct,confirming exactly to standard. |
| GENERAL |
ACHME THREAD |
A screw thread having an included angle of 29° andlargely used for feed screws on machine tools. |
| GENERAL |
ACUTE ANGLE |
An angle which is less than a right angle, 90°. |
| GENERAL |
ADDENDUM |
The portion of the tooth of a gear that extends from thepitch line to the outside. |
| GENERAL |
ALIGN |
To bring two or more components of a unit into correct positions with respect to one another. |
| GENERAL |
ALLOWANCE |
The intentional or desired difference between the maximumlimits of mating parts to provide a certain class of fit. |
| GENERAL |
ANGLE |
The amount of opening or divergence between two straight linesthat meet at a vertex or that intersect each other. |
| GENERAL |
ANGLE OF THREAD |
The included angle between the sides forming thegroove of the screw thread. |
| GENERAL |
ANNULUS |
A figure bounded by concentric circles or cylinders (e.g., a washer, ring, sleeve etc.). |
| GENERAL |
ARC |
A circular section of the circumference of a circle bounded by twoequal radii. |
| GENERAL |
ASSEMBLY |
A unit that contains the parts that make up a mechanism or amachine. |
| GENERAL |
AXIS |
The line real or imaginary, which passes through the center of a body and about which the body would rotate if set revolving. |
| GENERAL |
BACKLASH |
The clearance or amount of movement between the tooth profiles of a pair or train of gears in mesh. Also refers to the looseness or lost motion between screw threads which have been badly worn. |
| GENERAL |
BAFFLE |
A device which slows down or diverts the flow of gases, liquid,sound etc. |
| GENERAL |
BASIC SIZE |
The theoretical or nominal standard size from which allvariations are made. |
| GENERAL |
BASTARD |
Not standard, irregular. A bastard cut file is a rough cut file having coarse teeth than a second cut file. |
| GENERAL |
BELL MOUTHED HOLE |
A hole which is rounded or tapered slightlylarger at one end or both ends and is not exactly cylindrical throughoutits entire length. |
| GENERAL |
BEVEL |
Any surface not at right angle to the rest of the workpiece. If a bevel is at a 45° angle, it is frequently called a MITER. |
| GENERAL |
BIMETALLIC STRIP |
A strip of metal consisting of one metal (or alloy)in the top portion bonded to a different metal in the bottom portion.A straight strip becomes curved when heated. |
| GENERAL |
BLIND HOLE |
A hole which is made to a certain depth of a workpiece but does not pass through it. |
| GENERAL |
BISECTING AN ANGLE |
Dividing an angle into two equal parts. |
| GENERAL |
BOND |
The holding together of different parts. |
| GENERAL |
BORE |
The inside diameter of a cylinder, or a hole for a shaft. Also theoperation of machining a circular hole in a metal workpiece. |
| GENERAL |
BRUSH |
Pieces of carbon or copper that make a sliding contact against thecommutator or slip rings. |
| GENERAL |
CAM |
A plate or cylinder which transmits variable motion to a part of amachine by means of a follower. |
| GENERAL |
CAPSCREW |
A finished screw 5mm or larger, used for fastening twopieces together by passing the screw through a clearance hole in onepart and screwing in into a tapped hole in the other. |
| GENERAL |
CENTER |
A fixed point about which the radius of a circle or an arc moves. |
| GENERAL |
CENTER LINE |
A line used on drawings to show the centers of objectsand holes. The center line consists of alternate long and short dashes. |
| GENERAL |
CHAMFER |
To bevel or remove the sharp edge of a machined part. |
| GENERAL |
CHECK VALVE |
A valve which permits flow in one direction only. |
| GENERAL |
CIRCULAR PITCH |
The distance from the center of one gear tooth tothe center of the next gear tooth measured on the pitch line. |
| GENERAL |
CIRCUMFERENCE |
A curved line forming a circle and the length of thisline. |
| GENERAL |
COIL SPRING |
A spring steel wire wound in a spiral pattern. |
| GENERAL |
COMMUTATOR |
A number of copper bars connected to the armature windings but insulated from each other and from the armature. |
| GENERAL |
CONVOLUTION |
One full turn of screw. |
| GENERAL |
CORE |
The central or innermost part of an object. |
| GENERAL |
COUNTER BORING |
The operation of enlarging a portion of a hole forpart of its depth and to a given diameter, as for the head of a fillisterhead screw. |
| GENERAL |
COUNTER SINK |
To cut or shape a depression in an object so that thehead of a screw may set flush or below the surface. |
| GENERAL |
CREST CLEARANCE |
Defined on a screw form as the space between thetop of a thread and the root of its mating thread. |
| GENERAL |
CREST OF SCREW THREAD |
The top surface joining the two sides of flanks of a thread. |
| GENERAL |
CROWNED |
A slight curve in a surface e.g., on a roller or race way. |
| GENERAL |
DEDENDUM |
The depth of a gear tooth space below the pitch line orcircle. Also, the radial distance between the pitch circle and the rootcircle, which also includes the clearance. |
| GENERAL |
DIAPHRAGM |
A flexible dividing partition separating two compartments. |
| GENERAL |
DOUBLE FLARE |
A flared end of the tubing having two wall thickness. |
| GENERAL |
DOWEL |
A pin, usually of circular shape like a cylinder, used to pin orfasten something in position temporarily or permanently. |
| GENERAL |
DRIFT PIN |
A round tapered steel pin used to align rivet holes so that therivet will pass through the holes easily. |
| GENERAL |
ECCENTRIC |
A circle or cylinder having a different center from anothercoinciding circle or cylinder. Also, a device for converting rotary motionto reciprocating motion. |
| GENERAL |
END PLAY |
As applied to a shaft, the amount that the shaft can movebackward and forward. |
| GENERAL |
EYE BOLT |
A bolt threaded at one end and bent to a loop at the other end. |
| GENERAL |
FEATHER |
A sliding key, sometimes called splint. Used to prevent a pulley,gear or other part from turning on a shaft but allows it to movelengthwise. The feather is usually fastened to the sliding piece. |
| GENERAL |
FILLET |
A concave surface connecting the two surfaces meeting at an angle. |
| GENERAL |
FLANGE |
A metal part which is spread out like a rim, the action of workinga piece or part to spread out. |
| GENERAL |
FLANK (Side of thread) |
The straight part of the thread which connectsthe crest with the root. |
| GENERAL |
FLARE |
To open or spread outwardly. |
| GENERAL |
FULCRUM |
The pivot point of a lever. |
| GENERAL |
FLUSH |
When the surfaces of different parts are on the same level, they aresaid to be flush. |
| GENERAL |
FLUTE |
A straight or helical groove of angular or radial form machined ina cutting tool to provide cutting edges and to permit chips to escapeand the cutting fluid to reach the cutting edges. |
| GENERAL |
GATE VALVE |
A common type of manually operated valve in which asliding gate is used to obstruct the flow of fluid. |
| GENERAL |
GEAR |
A general term applied to types of toothed wheels, valve motion,pump works, lifting tackle and ropes. |
| GENERAL |
GEARING |
A train of gears or an arrangement of gears for transmittingmotion in a machinery. |
| GENERAL |
GIB |
An angular or wedge like strip of metal placed between two machineparts, usually sliding bearings, to ensure a proper fit and provideadjustment for wear. |
| GENERAL |
GLAND |
A device to prevent the leakage of gas or liquid past a joint. |
| GENERAL |
HAND WHEEL |
Any of the various wheels found on machine tools formoving or positioning parts of the machine by hand feed, as the tailstock handwheel on a lathe. |
| GENERAL |
HALF MOON KEY |
A fastening device in a shape somewhat similar to asemicircle. |
| GENERAL |
HELICAL GEAR |
A gear in which the teeth are cut at some angle otherthan a right angle across the gear face. |
| GENERAL |
HELICOIL |
A thread insert used to repair worn or damaged threads. It isinstalled in a retapped hole to bring the screw thread down to originalsize. |
| GENERAL |
HELIX |
The curve formed by a line drawn or wrapped around a cylinder which advances uniformly along the axis for each revolution, as thethread on a screw or the flute on a twist drill. A helix is often called aspiral in the shop. |
| GENERAL |
HELIX ANGLE OF A THREAD |
The angle made by the helix of thethread at the pitch diameter line with a line at right angle to the axis. |
| GENERAL |
HEXAGONAL NUT |
A nut having six sides and shaped like a hexagon. |
| GENERAL |
INVOLUTE GEAR TOOTH |
A curved tooth generated by unwinding astring from a cylinder to form the curve. |
| GENERAL |
JOURNAL |
The part of a shaft or axle that has been machined or finishedto fit into a bearing. |
| GENERAL |
KEYS |
Metal pieces of various designs that fit into a slot in a shaft andproject above the shaft to fit into a mating slot in the center hole of agear or pulley to provide a positive drive between the shaft and the gearor pulley. |
| GENERAL |
KEYSEAT |
The slot or recessed groove either in the shaft or gear, which ismade to receive the key. Also, it is called a KEYWAY. |
| GENERAL |
KNURL |
A uniform roughened or checked surface of either a diamond, astraight or other pattern. |
| GENERAL |
LAND |
The top surface of a tooth of cutting tools, such as taps, reamersand milling cutters. |
| GENERAL |
LEAD ANGLE |
The angle of the helix of a screw thread or worm thread. Itis the measure of the inclination of a screw thread from a planeperpendicular to the axis of the screw. |
| GENERAL |
LEAD HOLE |
A small hole drilled in a workpiece to reduce the feedpressure, aid in obtaining greater accuracy, and guide a large drill.Sometimes called PILOT HOLE. |
| GENERAL |
LEAD OF THREAD |
On a single threaded screw, the distance the screw or nut advances in one complete revolution. |
| GENERAL |
LEFT HAND SCREW |
One that screws into the mating part or advances when turned to the left or counter clockwise. |
| GENERAL |
LIMITS OF SIZE |
The minimum and maximum sizes permissible forspecific dimensions. |
| GENERAL |
LINE |
A tube, pipe or hose which is used as a conductor of fluid. |
| GENERAL |
LINKAGE |
A movable connection between two units. |
| GENERAL |
LOBE |
The projecting part such as rotor lobe or the cam lobe. |
| GENERAL |
LOCK NUT |
A type of nut that is prevented from loosening under vibration.The locking action is accomplished by squeezing, gripping or jammingagainst the bolt threads. |
| GENERAL |
LOOSE PULLEY |
A pulley which turns freely on a shaft so that a belt canbe shifted from the driving pulley to the loose pulley in order to stop amachine driven by an overhead belt drive. |
| GENERAL |
MAJOR DIAMETER |
On a straight thread, the diameter of the imaginary cylinder that just touches the crest of an external thread or the root of an internal thread. |
| GENERAL |
MALE PART |
The external part of any workpiece which fits into a hole,slot or groove of the mating part. |
| GENERAL |
MANUAL VALVE |
A valve which is opened or closed or adjusted by hand. |
| GENERAL |
MESH |
Engaging one part with another, as the teeth of one gear mesh withthe teeth of a mating gear. |
| GENERAL |
MICRON |
One millionth of a meter or 0.039370 inch. |
| GENERAL |
MINOR DIAMETER |
On a straight thread, the diameter of the imaginary cylinder which just touches the root of an external thread or the crest of an internal thread. |
| GENERAL |
MORSE TAPER |
A self holding, standard taper largely used on drillingtools, drilling machine spindles, and some lathes. |
| GENERAL |
MULTIPLE THREADED SCREW |
A screw with two or more threadscut around the periphery of the workpiece to provide an increased lead with a specified pitch. |
| GENERAL |
NUT |
A metal fastener of square, hexagon or other shape, having an internalthread which screws onto a bolt, stud or arbor. |
| GENERAL |
OFF CENTER |
Not on the true center line or axis, offset, eccentric orinaccurate. |
| GENERAL |
PEEN |
The end of the head of a hammer opposite the face, such as ball,straight or cross peen, and used for peening or riveting. |
| GENERAL |
PILOT |
A guide at the end of the counter bore which fits freely into thedrilled hole and align the body of the counterbore while cutting takesplace. |
| GENERAL |
PILOT SHAFT |
A shaft positioned in or through a hole of a componentas a means of aligning the components. |
| GENERAL |
PILOT VALVE |
A valve used to control the operation of another valve. |
| GENERAL |
PINION |
The smaller of the pair of gears regardless of the size or type. |
| GENERAL |
PIPE THREAD |
A 60° thread having flattened crest and roots which arecut on a taper. Pipe thread is used on piping and tubing. |
| GENERAL |
PITCH |
In screw threads, the distance from a point on one thread to acorresponding point on the next thread measured parallel to the axis. Inthe case of spur gears, indicates the size of the gear teeth and is correctly called diametral pitch. |
| GENERAL |
PITCH DIAMETER |
For screw threads, the diameter of an imaginary cylinder, the surface of which would pass through the threads at suchpoints that would make the width of the groove and width of the landequal to one half the pitch. |
| GENERAL |
PLAY |
The movement between two components. |
| GENERAL |
PULLEY |
A wheel having a plain or V groove rim over which a belt runsfor the transmission of power from one shaft to another. |
| GENERAL |
QUILL |
A hollow shaft that revolves on a solid shaft carrying pulleys, gearsor clutches. When the clutch is closed, the quill and shaft revolvetogether. |
| GENERAL |
RACK |
A straight metal strip having teeth that mesh with those of a gear toconvert rotary into reciprocating motion or just the opposite. |
| GENERAL |
RATCHET |
A gear with triangular shaped teeth to be engaged by a pawl which gives it intermittent motion or locks it against backwardmovement. |
| GENERAL |
RECESS |
A groove cut below the normal surface of a workpiece. |
| GENERAL |
RIGHT HAND THREAD |
A screw thread which advances into the matingpart when turned clockwise or to the right. |
| GENERAL |
RIVET |
A one piece fastener consisting of a head and a body and used forfastening two or more pieces together by passing the body through ahole in each piece and then forming a second head on the body end. Itcannot be removed except by taking off the
head. |
| GENERAL |
SCREW |
A helix formed or cut on a cylindrical surface which may advancealong the axis to the right or left. The helix may be single or multiple. |
| GENERAL |
SCREW THREAD |
A ridge of uniform section or shape in the form of ahelix on the external or internal surface of a cylinder, or in the form of a conical spiral on the external or internal surface of a cone. |
| GENERAL |
SET SCREW |
Usually a hardened steel screw having either no head or asquare head and with various degrees of points or ends to lock or tightenadjustable machine parts in position on a shaft. |
| GENERAL |
SHOULDER SCREW |
A screw having two or more diameters or shouldersand commonly used for supporting levers and other machine parts thathave to operate freely. |
| GENERAL |
SINGLE THREAD |
A screw thread cut around a cylinder having a singlestart in which the lead is equal to the pitch. |
| GENERAL |
SOCKET HEAD |
Screw head having a hexagonal or other form of recessedsocket in the head so that the screw can be turned with a wrench or key,as a hexagon key. |
| GENERAL |
SPLINE |
Slot or groove cut in a shaft or bore, a splined shaft onto which ahub, wheel, gear etc. with matching splines in its bore is assembled sothat the two must turn together. |
| GENERAL |
SPOOL VALVE |
A hydraulic directional control valve in which the directionof the fluid is controlled by the means of a grooved cylindrical shaft(spool). |
| GENERAL |
SPRING |
An elastic device which yields under stress or pressure but returnsto its original state or position when the stress or pressure is removed. |
| GENERAL |
SPUR GEAR |
A toothed wheel having external radial teeth. |
| GENERAL |
SQUARE THREAD |
A form of screw thread in which the cross–section of the thread forms a square, making the width of the thread equal to thespace between the threads. |
| GENERAL |
STEP BLOCK |
A block of steel or cast iron having a series of steps and usedfor supporting the ends of machine clamps when clamping work to thetable. |
| GENERAL |
STOPS |
Devices attached to the movable parts of a machine tool to limitthe amount of travel. |
| GENERAL |
STUD |
A rod having thread on both ends. |
| GENERAL |
STUFFING BOX |
A chamber having manual adjustment device for sealing. |
| GENERAL |
TAPER |
A shaft or hole that gets gradually smaller toward one end. |
| GENERAL |
TAPER PINS |
Steel pins used for locating and holding the machine partsin position on a shaft. |
| GENERAL |
T-BOLT |
A threaded bolt having a square or rectangular end which fits intothe T slot of a machine table for clamping workpieces. |
| GENERAL |
TEMPLATE |
A flat pattern or guide plate usually made from sheet metaland used as a gauge or guide when laying out, drilling, forming in amachine or filing irregular shapes on metal pieces. |
| GENERAL |
THUMB SCREW |
A type of screw having a winged or knurled head forturning by hand when a quick and light clamping effect is desired. |
| GENERAL |
TOLERANCE |
A fractional allowance for variation from the specifications. |
| GENERAL |
T-SLOT |
A recessed or undercut slot made with a special T shaped cutter inthe tables of machine tools to receive the square head of a T bolt forclamping workpiece. |
| GENERAL |
U-BOLT |
An externally threaded fastener bent in the shape of the letter Uand with both ends threaded. |
| GENERAL |
VALVE |
Any device or arrangement used to open or close an opening topermit or restrict the flow of a liquid, gas or vapour. |
| GENERAL |
V – BLOCKS |
Square or rectangular shaped blocks of steel that are usually hardened and accurately ground. These have 90° V groove through thecenter and are provided with clamps for holding round workpiece forlaying out, drilling, milling etc. |
| GENERAL |
VISE |
A mechanical device of many designs and sizes in which work piecesare clamped for hand or machine operations. |
| GENERAL |
V-WAYS |
The top of the bed of a lathe, planer or other machine tool whichacts as bearing surface for aligning and guiding the moving parts such asthe carriage of a lathe. |
| GENERAL |
WORM |
A threaded cylinder which meshes with and drives a worm gear,the thread being specially designed to mate with the teeth in the wormgear. |
| GENERAL |
WORM GEARS |
Gears with teeth cut at an angle to be driven by a worm.The teeth are usually cut out with a hob to fit the worm. |
| MATERIALS |
ABRASIVE |
A natural or artificial material such as sand stone, emery,aluminium oxide or silicon carbide. |
| MATERIALS |
ACID |
A chemical term to define a material which gives an acid reaction. |
| MATERIALS |
ADDITIVES |
Chemicals added to oil or fuel to increase its effectivenessand obtain desirable qualities. |
| MATERIALS |
ADHESIVES |
Materials or compositions that enable two surfaces to jointogether. An adhesive is not necessarily a glue, which is considered to bea sticky substance, since many adhesives are not sticky. |
| MATERIALS |
AGGREGATE |
Small particles such as powders that are used for powdermetallurgy, that are loosely combined to form a whole, also sand androck as used in concrete. |
| MATERIALS |
ALLOTROPIC METALS |
Metals which exist in one lattice form over arange of temperature, but at a certain temperature the lattice form changesto another type which is stable over another temperature range. |
| MATERIALS |
ALLOY |
A substance having metallic properties and is composed of two ormore chemical elements, of which at least one is a metal. |
| MATERIALS |
ALLOYING ELEMENTS |
Elements either metallic or non-metallic addedintentionally to the base metal, to make a marked change in theproperties of the base metal and to secure certain desirable properties. |
| MATERIALS |
ALLOY STEEL |
Steel containing significant quantities of alloying elements(other than carbon and the commonly accepted amounts of manganese,silicon, sulphur and phosphorus) added to effect changes in mechanicaland physical properties. |
| MATERIALS |
ALNICOS |
Alnicos materials are composed mainly of aluminium, nickel,cobalt and iron. Some include additions of copper and titanium. They are high-coercive force, high magnetic energy alloys. |
| MATERIALS |
ALOXITE |
Artificial abrasive material used in the manufacture of grinding wheels. Essentially it consists of alumina, or aluminium oxide, thechemical symbol for which is Al2O3· |
| MATERIALS |
ALPHA IRON |
The body centered cubic form of pure iron, stable below 1025°C. |
| MATERIALS |
ALUMEL |
A nickel base alloy containing about 2.5% Mn, 2% AI, and1 % Si, used chiefly as a component of pyrometric thermocouples. |
| MATERIALS |
ALUMINIUM |
Grayish white metal, very light in weight, and having inits pure form low mechanical strength, frequently alloyed with otherelements to improve its physical characteristics. |
| MATERIALS |
ALUMINIUM ALLOY |
Aluminium which is alloyed with other metalsto give it strength and desirable properties. |
| MATERIALS |
ALUMINIUM BRONZE |
Alloy containing 90% copper and 10%aluminium, extensively used for diecasting. |
| MATERIALS |
ANTIFREEZE |
A chemical added to the coolant in order to lower itsfreezing point. |
| MATERIALS |
ANTIFRICTION BEARINGS |
Ball, roller and needle bearings exhibitvery low friction and are suitable for very high speeds, and high loading. |
| MATERIALS |
ANTIMONY |
Brittle, bluish white metallic element designated Sb. Meltingpoint 630°C. Used as a constituent in some alloys, for instance, bearingsand storage battery plates. |
| MATERIALS |
ARGON |
An inert gas used in certain welding and heat treatment processes. |
| MATERIALS |
ARSENIC |
A brittle, grayish metallic element designated As. Melting point814°C. Used as a constituent in some alloys, and in the manufacture of lead shot. |
| MATERIALS |
ASBESTOS |
A fibrous organic mineral that is non-combustible,non-conducting and acid resistant. |
| MATERIALS |
ATOM |
The smallest particle of an element. |
| MATERIALS |
AUSTENITE |
A solid solution of iron and carbon and sometimes otherelements in which gamma iron, characterized by a face centered crystal structure, is the solvent. This is stable only within a particular range of composition and temperature, and is non-magnetic. |
| MATERIALS |
AUSTENITIC CAST IRON |
Cast iron containing such a proportion of alloying constituents (nickel, chromium, copper or manganese) thatthe structure in the cast state is completely austenitic at ordinary temperatures. |
| MATERIALS |
BABBITT METAL |
White metal bearing alloy, suitable for bearingssubjected to moderate pressures, contains tin 59.5% min, copper 2.25-3.75%, antimony 9.5-11.5%, lead 26% min, iron 0.08% max, bismuth0.08% max. |
| MATERIALS |
BACKING SAND |
Foundry sand placed next to the facing sand after thelatter is in place. It forms the bulk of sand used to complete the mould. |
| MATERIALS |
BAINITE |
A structure in steel named after E.G. Bain that forms between481° C and the M’s temperature. At the higher temperatures, it is knownas upper or feathery bainite. At the lower temperatures it is known aslower or a acicular bainite and resembles
martensite. |
| MATERIALS |
BAKELITE |
Trade name for one of the first used thermo-setting syntheticresins. It is derived from the name of the inventor Dr. L.H. Backeland,and its formation is the result of a chemical action between formaldehydeand phenol. |
| MATERIALS |
BAR |
A piece of material thicker than sheet, long in proportions to its width or thickness, and whose width to thickness ratio is much smallerthan sheet or plate, as low as unity for squares and rounds. |
| MATERIALS |
BARK |
The decarborized layer just beneath the scale that results from heatingsteel in an oxidizing atmosphere. |
| MATERIALS |
BASE METAL |
Metal present in the alloy in largest proportion. |
| MATERIALS |
BEARING METALS |
Metals (alloys) used for that part of a bearing whichis in contact with the journal e.g., bronze or white metal, used on accountof their low coefficient of friction when used with a steel shaft. |
| MATERIALS |
BELFAST SAND |
Red moulding sand of fine grain, and good bondingqualities with moderate refractoriness, suitable for use as a facing sand. |
| MATERIALS |
BELL METAL |
High tin bronze, used in the casting of bells, which iscomposed of up to 30% tin, together with some zinc and lead. |
| MATERIALS |
BESSEMER STEEL |
Steel manufactured in a Bessemer converter, andsometimes referred to as mild steel. |
| MATERIALS |
BILLET |
A solid semifinished round or square product that has been hot worked by forging, rolling or extrusion. |
| MATERIALS |
BLUE VITRIOL |
A chemical mixture of copper sulphate, water andsulphuric acid. Applied to polished metal for layout purposes, it turnsto copper colour. |
| MATERIALS |
BOND |
In grinding wheels and other relatively rigid abrasive products, thematerial that holds the abrasive grains together. In welding, the junctionof joined parts. |
| MATERIALS |
BORON CARBIDE |
An abrasive used in cutting tools, a compound whosechemical formula is B4 C and obtained from borontrioxide (B2O3) andcoke at a temperature of 2500°C. Fine powder as hard as diamond. |
| MATERIALS |
BRASS |
A range of copper zinc alloys, usually those containing 55-80%copper. Alloys containing not less than 63% of copper are called ALPHA BRASSES. When less than 63% of copper is present, the alloy is called ALPHA-BETA alloy. |
| MATERIALS |
BRAZING ALLOY |
Copper zinc alloy, which sometimes includes smallpercentages of tin, and lead, used for brazing, the melting point of which is governed by the percentage of zinc. |
| MATERIALS |
BRINE |
Water that has been saturated or nearly saturated with salt. |
| MATERIALS |
BRIQUETS |
Compact cylindrical or other shaped blocks formed of finely divided materials by incorporation of a binder, by pressure, or both.Materials may be ferroalloys, metal borings or chips, silicon carbide etc. |
| MATERIALS |
BRONZE |
A copper rich, copper tin, copper lead or copper beryllium alloy to which often alloying elements (phosphorous, aluminium, zinc,silicon) may be added. Usually bronze is a copper tin alloy containing90% copper and 10% tin. |
| MATERIALS |
BUILDING BRICK |
These are made from clay. Generally, the clay ismixed with water to a plastic state and extruded in a column that is wire-cut crosswise to the desired size. Occasionally the dry pressingprocess is used. |
| MATERIALS |
CADMIUM |
White ductile metallic element used to plate steel and as analloying element. |
| MATERIALS |
CALCIUM ALUMINIUM SILICON |
An alloy composed of 10-14%calcium, 8-12% aluminium, and 50-53% silicon used for degasifyingand deoxidizing steel. |
| MATERIALS |
CALCIUM BORIDE |
An alloy of calcium and boron, containing about61% boron and 39% calcium and used in deoxidation and degasificationof non-ferrous metals and alloys. |
| MATERIALS |
CALCIUM CARBIDE |
A grayish black, hard crystalline substance madein the electric furnace by fusing lime and coke. Addition of water tocalcium carbide forms acetylene and a residue of slaked lime. |
| MATERIALS |
CALCIUM MANGANESE SILICON |
An alloy containing 17 to 19%calcium, 8 to 10% manganese, 55 to 60% silicon and 10 to 14% iron,used as a scavenger for oxides, gases and non-metallic impurities insteel. |
| MATERIALS |
CALCIUM MOLYBDATE |
A crushed product containing 40-50%molybdenum, 23-25% lime, 3% iron (max) and 5-10% silica, used toadd molybdenum to iron and steel produced in open hearth, air furnaceor electric furnace. |
| MATERIALS |
CALCIUM SILICON |
An alloy of calcium, silicon and iron containing28-35% calcium, 60-65% silicon and 6% max iron used as a deoxidizerand degasifier for steel and cast iron. Sometimes called CALCIUMSILICIDE. |
| MATERIALS |
CAPPED STEEL |
Semiskilled steel cast in a bottle top mould and covered with a cap fitting into the neck of the mould. The cap causes the topmetal to solidify. Pressure is build up in the sealed in molten metal andresults in a surface condition much like that
of RIMMED STEEL. |
| MATERIALS |
CARBIDE |
A compound of carbon with one or more metallic elements. |
| MATERIALS |
CARBOHYDRATES |
Constitute a large group of molecules, widely distributed in nature, which contains only carbon, hydrogen and oxygen.The simplest carbohydrates are sugars. |
| MATERIALS |
CARBON |
A non-metallic element found in all organic substances that isused as an alloying element in ferrous metals. |
| MATERIALS |
CARBON STEEL |
Steel containing carbon up to about 2% and only residual quantities of other elements except those added for deoxidation, with silicon usually limited to 0.60% and manganese to about 1.65%. Also termed PLAIN CARBON STEEL. |
| MATERIALS |
CARBORUNDUM |
Artificially manufactured abrasive, trade name for acarbide of silicon (SiC) which is prepared by heating sand with coke inan electric furnace. |
| MATERIALS |
CARTRIDGE BRASS |
Alloy containing about 70% copper and 30% zinc,in which impurities are kept to a minimum, and it possesses a highdegree of strength, combined with good ductility. |
| MATERIALS |
CAST ALLOY TOOL |
A cutting tool made by casting a cobalt base alloy and used at machining speeds between those for high speed steels andsintered carbides. |
| MATERIALS |
CAST IRON |
Iron obtained by slightly purifying the pig iron in a cupolaor other furnace. This has high carbon content, averaging between 2.5and 4.5% and frequently alloyed with small percentage of other elementsand primarily used for making castings. It
is somewhat brittle. |
| MATERIALS |
CELLULOSE |
A polysaccharide of glucose units that constitutes the chief part of the cell walls of plants. For example, cotton fibre is over 90%cellulose and is the raw material of many manufactured goods such aspaper, rayon and cellophane. In many plant
cells, the cellulose wall isstrengthened by the addition of lignin, forming lignocellulose. |
| MATERIALS |
CEMENT |
Material used for uniting other materials so that they adherepermanently. |
| MATERIALS |
CEMENTED CARBIDE |
A solid and coherent mass made by pressing andsintering a mixture of powders of one or more metallic carbides, and amuch smaller amount of a metal, such as cobalt, to serve as a binder. |
| MATERIALS |
CEMENTITE |
Hard, brittle, crystalline iron carbide (compound of ironand carbon Fe3C) found in steels having a high carbon content. It ischaracterized by an orthorhombic crystal structure. When it occurs as aphase in steel, the chemical composition will be
altered by the presenceof manganese and other carbide forming elements. |
| MATERIALS |
CERAMIC |
Metallic oxides of metals such as silicon and aluminium. |
| MATERIALS |
CERAMIC MATERIALS |
The materials that demonstrate great hardness andresistance to heat and are used to make cutting tools, coatings on tools,parts subjected to very hot conditions, abrasives and mechanical parts. |
| MATERIALS |
CERMET (Ceramal) |
A body consisting of ceramic particles bonded witha metal. |
| MATERIALS |
CESIUM 13T |
A radioisotope, recovered as a fission product from nuclearreactors, with a half-life of 33 years and a dominant characteristic gammaradiation of 0.66 mev. It is suitable as a gamma radiation source,especially in radiography and therapy. |
| MATERIALS |
CHILL |
(1) A metal insert embedded in the surface of a sand mould or coreor placed in a mould cavity to increase cooling rate at that point. (2) White iron occurring on a gray iron casting such as the chill in the wedge test. |
| MATERIALS |
CHINESE SCRIPT |
An angular microstructural form with the constituentsalpha (AI-Fe-Si) and alpha (AI-Fe-Mn-Si) in cast aluminium alloys. A similar microstructure is found in cast magnesium alloys containingsilicon as Mg2Si. |
| MATERIALS |
CHROMEL |
(1) 90% Ni, 10% Cr alloy used in thermocouples. (2) A series of Nickel chromium alloys, some with iron, used for heat resistantapplications. |
| MATERIALS |
CHROMIUM |
Grayish white metallic element obtained from chromite,chemical symbol is Cr and melting point 1830°C, used in alloyingsteels and corrosion resisting plating. |
| MATERIALS |
CLAD METAL |
A composite material containing two or three layers thathave been bonded together. The bonding may have been accomplishedby rolling, welding, casting, heavy chemical deposition or heavy electroplating. |
| MATERIALS |
COAL TAR |
Also called crude oil, when subjected to fractional distillationand purification, yields a variety of useful products-neutral, acidic, andbase oils. |
| MATERIALS |
COBALT-60 |
A radio isotope with a half-life of 5.2 years and dominantcharacteristic gamma radiation energies of 1.17 and 1.33 MeV. It isused as a gamma radiation source in industrial radiography and therapy. |
| MATERIALS |
COLD FINISHED STEEL |
Steel bar which has been cold drawn/coldrolled, centerless ground or turned smooth to improve surface finish,accuracy or mechanical properties. |
| MATERIALS |
COLD ROLLED STEEL |
Steel which has been passed through rollers atthe steel mill to size it accurately and smoothly. |
| MATERIALS |
COLLOIDS |
Finely divided material, less than 0.5 micron in size, gelatinous,highly absorbent and sticky when moistened. |
| MATERIALS |
COLUMNAR STRUCTURE |
A coarse structure of parallel columns of grains having the long axis perpendicular to the casting surface. |
| MATERIALS |
COMBINED CARBON |
The part of the total carbon in steel or cast ironthat is present as other than FREE CARBON. |
| MATERIALS |
COMPOSITE FIBRES |
The strands of material used as reinforcementextending through a resin or other matrix in a composite material. Anexample is carbon fibres in an epoxy matrix. Loads applied to thestructure are carried by the fibres. |
| MATERIALS |
COMPOSITE MATERIAL |
Materials exhibiting a much higher strengththan the matrix or base material because of reinforcement fibres. |
| MATERIALS |
CONDUCTORS (electrical) |
Materials in which an electromotive forcecauses appreciable drift of electrons, called CURRENT. |
| MATERIALS |
CONSTANTAN |
A group of copper nickel alloys containing 45-60%copper with minor amounts of iron and manganese and characterizedby relatively constant electrical resistivity irrespective of temperatureused in resistors and thermocouples. |
| MATERIALS |
CONVERSION COATING |
A coating consists of a compound of the surfacemetal produced by chemical or electro-chemical treatments of the metal. |
| MATERIALS |
COPPER |
A reddish, soft, ductile metal with very good heat and electricalconductivity and is the basic element in brass and bronze. |
| MATERIALS |
CORE |
(1) In a metal casting, the hollow parts (which cannot be shaped aseasily by the pattern) that are made by using formed sand shapes, thatare strengthened by baking or by using epoxy. (2) In a ferrous alloy, theinner portion that is softer than
the outer portion or case. |
| MATERIALS |
CORE SAND |
Variety of silica sand. Rock sand, river bed and sea shoresand, commonly known as sharp sand, used for making of cores in thefoundry because they are capable of withstanding high temperatures,and resisting the penetrating action of the molten
metal. |
| MATERIALS |
CORUNDUM |
Natural abrasive of the aluminium oxide type that hashigher purity than emery. |
| MATERIALS |
ROCUS CLOTH |
A very fine abrasive polishing cloth. |
| MATERIALS |
CHROMIUM BRONZE |
It is a precipitation hardening alloy of copper with upto 1 per cent chromium. It has high electrical conductivity andhigh temperature resistance. |
| MATERIALS |
CRUCIBLE |
A vessel or pot, made of refractory substance or of a metal with a high melting point, used for melting metals or other substances. |
| MATERIALS |
CRUCIBLE STEEL |
A high grade steel made by melting iron in a crucibleand adding charcoal, pig iron and some substance rich in carbon so that the resulting metal will contain from 0.75-1.5% carbon. This steel isused for tools, dies and better grades of cutlery. |
| MATERIALS |
CRYSTAL |
A solid composed of atoms, ions or molecules arranged in apattern which is repetitive in three dimensions. |
| MATERIALS |
CRYSTALLOID |
A substance that forms a true solution and is capable of being crystallized. |
| MATERIALS |
CUNIFE |
Cunife is a copper-nickel iron alloy that is malleable, ductile andmachinable, even in an age-hardened form. Magnets are formed from wire stock in round, square, or rectangular form. |
| MATERIALS |
CUPRO NICKEL ALLOY |
Alloy of nickel and copper (approximately 60% nickel and 30% copper), which combines the strength of steel with immunity from corrosion and resistance to high temperature. |
| MATERIALS |
CURIE |
The quantity of a radioactive nuclide in which the number of disintegrations per second is 3. 700 × 10 to the power of ten. |
| MATERIALS |
CUTTING FLUID |
A fluid, usually a liquid, used in metal cutting toimprove finish, tool life or dimensional accuracy. |
| MATERIALS |
DEGASIFIER |
A material employed for removing gases from metals andalloys. |
| MATERIALS |
DELTA IRON |
An allotropic (polymorphic) form of iron, stable above1390oC, crystallizing in the body centered cubic lattice. |
| MATERIALS |
DENDRITE |
A crystal that has tree like branching pattern, being mostevident in cast metals slowly cooled through the solidification range.Dendrite generally grow inward from the surface of a mould. |
| MATERIALS |
DEOXIDIZER |
A substance that is used to remove either free or combinedoxygen from molten metals, for example, ferrosilicon in steel making. |
| MATERIALS |
DEVELOPER |
(1) In photography, a processing solution that reduces theexposed grains of an emulsion to metallic silver, thus making the imagevisible. \n(2) In xero radiography a dry powder used to make theelectrostatic image visible.\n (3) In penetrant inspection,
a material used to draw the penetrant back to the surface, thus revealing locations of cracks or fissures. |
| MATERIALS |
DEVIZES SAND |
Coarse greenish yellow moulding sand, suitable for dry sand work in the foundry for medium and heavy castings, but not forfine work, owing to its large grain size. |
| MATERIALS |
DIAMAGNETIC SUBSTANCES |
Actually set up fields that opposeapplied fields. |
| MATERIALS |
DIAMOND |
Allotropic form (crystalline form) of carbon (the hardestknown mineral) which when very strongly heated, changes to graphite. Used as a cutting tool, and a grinding tool and to dress grinding wheels. |
| MATERIALS |
DROSS |
The scum that forms on the surface of molten metals largely because of oxidation but sometimes because of the rising of impuritiesto the surface. |
| MATERIALS |
DRY SAND MIXTURE (Mould) |
Specially prepared and for making themoulds that are to be dried before using. This demands a sand that when dried or baked will give strength, porosity and permeability. |
| MATERIALS |
DUCTILE IRON |
A high strength type of cast iron that will bend withoutfracturing. |
| MATERIALS |
DURALUMIN |
Aluminium alloy containing copper, manganese andmagnesium, which can be cast, forged or stamped, and is widely usedfor sheets, tubes, forgings, rivets, nuts, bolts and similar parts. |
| MATERIALS |
DYE PENETRANT |
Penetrant with a dye added to make it more readily visible under normal lighting conditions. |
| MATERIALS |
ELASTOMER |
Any of various elastic substances resembling rubber. |
| MATERIALS |
ELECTRIC STEEL |
Special alloy steel, tool steel, and steel for castings,melted in electric furnaces that permit very close control and the additionof alloying elements directly into the furnaces. |
| MATERIALS |
ELECTRICAL INSULATING MATERIALS |
The materials which offera very large resistance to flow of current, and for that reason they areused to keep the current in its proper path along the conductor. |
| MATERIALS |
ELECTRICAL SHEETS |
It is the trade name for iron and steel sheets usedin the manufacture of punchings for laminated magnetic circuits andusually refers to silicon steel sheets. |
| MATERIALS |
ELECTROLYTE |
A non-metallic conductor, usually a fluid, in whichelectric current is carried by the movement of ions. |
| MATERIALS |
ELECTROMAGNET |
A magnet of variable strength produced by passingcurrent through conductors around a soft iron core. |
| MATERIALS |
ELEKTRON |
Magnesium base alloy supplied in the form of tubes, sheets,extruded sections, forgings and castings. |
| MATERIALS |
ELEMENT |
A substance which cannot be chemically broken down tosimpler substances. |
| MATERIALS |
EMERY |
An abrasive material which, like corundum or aluminium oxidetype, is a natural abrasive. |
| MATERIALS |
EMULSIFIER |
(1) A material that increases the stability of dispersion of one liquid in another. (2) In penetrant inspection, a material that isadded to some penetrants after the penetrant is applied to make a water washable mixture. |
| MATERIALS |
ENAMEL |
Type of paint that dries to a smooth, glossy finish. |
| MATERIALS |
ERITH SAND |
Yellow, close grained, refractory moulding sand, havinggood strength and reasonable permeability. |
| MATERIALS |
EUTECTIC |
Mixture (an alloy) in which the proportions of the constituentsare such that the mixture has a lower melting point than any of theconstituents. |
| MATERIALS |
FACING SAND |
Sand that forms the face of the mould which comes incontact with the molten metal. |
| MATERIALS |
FALKIRK SAND |
Moulding sand with a coarse, open texture. It has very good permeability and moderate binding qualities. |
| MATERIALS |
FERRIC OXlDE |
Red iron oxide, commonly available as haematite ore.Used in ground form in cores and moulds to increase hot compressivestrength. |
| MATERIALS |
FERRITE |
A solid solution of one or more elements in body centeredcubic iron. Iron which contains little or no carbon. It is very soft andductile and is known as alpha iron. A magnetic form of iron. |
| MATERIALS |
FERROALLOYS |
Alloys containing of certain elements combined withiron, and used to increase the amount of such elements in ferrous metalsand alloys. In some cases the ferroalloys may serve as deoxidizers. |
| MATERIALS |
FERROALUMINIUM |
An alloy of iron and aluminium containing about20% iron and 80% aluminium. |
| MATERIALS |
FERROCHROMIUM |
An alloy of iron and chromium available in severalgrades containing from 60-72% chromium and from 0.06-7% carbon. |
| MATERIALS |
FERROMAGNETIC MATERIAL |
A material that in general exhibits thephenomena of hysteresis and saturation, and whose permeability isdependant on the magnetizing force. |
| MATERIALS |
FERROMANGANESE |
An alloy of iron and manganese containing from78-82% manganese. |
| MATERIALS |
FERROMOLYBDENUM |
An alloy of iron and molybdenum containing58-64% molybdenum. |
| MATERIALS |
FERROPHOSPHOROUS |
An alloy of iron and phosphorous containing70% iron and 25% phosphorous. |
| MATERIALS |
FERROSILICON |
An alloy of iron and silicon available in several gradescontaining different percentages of silicon from 14-20% silicon,42-52% silicon, 69.5-82% silicon, 82-88% silicon and 88-95%silicon. |
| MATERIALS |
FERROUS |
From the latin word FERRUM meaning iron, describes analloy containing a significant amount of iron. |
| MATERIALS |
FERROUS METALS |
All metals that are alloys of iron, carbon, and othermaterials. |
| MATERIALS |
FIBRE GLASS |
A resin matrix reinforced with glass fibres for strength. A reinforced plastic manufacturing material with many applications. |
| MATERIALS |
FILTER |
In radiography a device, usually, a thin metallic layer inserted intoa beam of radiation so as to modify the transmitted spectrum of radiation. It may be used to enhance or reduce contrast or minimizeundesirable scattered radiation. |
| MATERIALS |
FIRE BRICK |
Brick made of refractory clay or other material which resistshigh temperatures. |
| MATERIALS |
FIRE CLAY |
A type of clay which is resistant to high temperatures. |
| MATERIALS |
FIXER (hypo) |
A photographic processing solution, the principle functionof which is to dissolve the undeveloped silver halide grains from thedeveloped film, thus making the image more prominent. It often servesalso to harden the gelatine and halt the developing
process. |
| MATERIALS |
FLUX |
A solid, liquid or gaseous material that is applied to solid or moltenmetal in order to clean and remove oxides. |
| MATERIALS |
FOAM RUBBER |
It is also called sponge. Foam rubbers are formed by theinclusion of chemicals in rubber compounding which form gases duringvulcanization. |
| MATERIALS |
FREE CARBON |
The part of the total carbon in steel or cast iron that ispresent in the elemental form as graphite or temper carbon. |
| MATERIALS |
FREE FERRITE |
Ferrite that is structurally separate and distinct as may beformed without the simultaneous formation of carbide when coolinghypoeutectoid austenite into the critical temperature range. |
| MATERIALS |
GAMMA IRON |
The face centered cubic form of pure iron, stable from910-1230°C. |
| MATERIALS |
GANGUE |
The worthless portion of an ore that is separated from thedesired part before smelting is commenced. |
| MATERIALS |
GEL COAT |
A thin coat of plastic resin covering fibreglass panels. |
| MATERIALS |
GILDING METAL |
Alloy containing 80-90% copper, the reminder beingzinc. Often used in wire form for jewellery and decorative applications. |
| MATERIALS |
GLACIER METAL |
Tin base alloy used for lining bearings. |
| MATERIALS |
GLASS |
Transparent substance produced by the fusion of sand and certainmetallic salts, of which soda compounds are most common. |
| MATERIALS |
GLUE LAMINATED BEAM |
A structural wood beam made by gluingthinner boards together until a desired dimension for beam thickness isreached. Glue laminated beam will support large loads and can spanlong distances with only end support. |
| MATERIALS |
GRAIN |
Individual crystal in metals. |
| MATERIALS |
GRANITE |
A rock composed of quartz, feldspar and mica from whichdimensionally stable surface plates and angle plates are made. |
| MATERIALS |
GRANULAR PEARLITE |
A structure formed from ordinary lamellarpearlite by long annealing at a temperature below but near to the criticalpoint, causing the cementite to spherodize in a ferritic matrix. |
| MATERIALS |
GRAPHITE |
Native carbon in hexagonal crystals, also foliated or granularmassive, of black colour with metallic lusture, and soft. |
| MATERIALS |
GRAPHITE FIBRE |
Strands of carbon in graphite form used in compositematerials as the main load bearing constituent. |
| MATERIALS |
GRAPHITIZER |
Any substance, such as silicon, titanium, aluminium etc. which promotes the formation of graphite in cast iron compositions. |
| MATERIALS |
GRAY CAST IRON |
A cast iron that gives a gray fracture due to the presenceof flake graphite. Often called GRAY IRON. |
| MATERIALS |
GRIT SIZE |
Nominal size of abrasive particles in a grinding wheel correspondingto the number of openings per linear inch in a screen through which theparticles can just pass. Sometimes called GRAIN SIZE. |
| MATERIALS |
GUN METAL |
Bronze alloy containing 88-89% copper, 5-10% tin and2-6% zinc, lead up to 20% may also be added, although the quantity seldom exceeds 5%. |
| MATERIALS |
HALF LIFE |
The characteristic time required for half of the nuclei of aradioactive species to disintegrate spontaneously. |
| MATERIALS |
HALF VALUE LAYER |
In radiation, the thickness of absorber that willreduce the intensity of radiation to one half. It is useful in estimatingradiographic exposure. |
| MATERIALS |
HIGH CARBON STEEL |
Steel that has more than 0.6% carbon. |
| MATERIALS |
HIGH SPEED STEEL |
Alloy steel (alloying elements being tungsten,chromium, vanadium, cobalt and molybdenum) which retains itsstrength and hardness at red heat, and is thus suitable for cutting tools which reach high temperatures in use. |
| MATERIALS |
HINDU MINIUM |
A high strength aluminium alloy containing, in additionto aluminium, magnesium, iron, titanium, copper, nickel and silicon, which after heat treatment has a strength exceeding that of mild steel. |
| MATERIALS |
HOT ROLLED STEEL |
Steel rolled to shape while being heated to theplastic condition. |
| MATERIALS |
HOYT METAL |
Commercial grade of white metal used for bearing purpose. |
| MATERIALS |
HYPER EUTECTIC ALLOY |
Any binary alloy whose composition lies tothe right of the EUTECTIC on an equilibrium diagram and whichcontains some eutectic structure. |
| MATERIALS |
HYPO EUTECTIC ALLOY |
Any binary alloy whose composition lies tothe left of the EUTECTIC on an equilibrium diagram and whichcontains some eutectic structure. |
| MATERIALS |
IMPURITIES |
Elements or compounds whose presence in a material isundesired. |
| MATERIALS |
INCONEL |
Nickel alloy highly resistant to heat and corrosion, with goodmechanical properties, consisting of 80% nickel, 12-14% chromium,the balance being iron. |
| MATERIALS |
INERT GAS |
A gas that may be used as a shield in welding or heat treatmentto prevent oxidation or scaling. |
| MATERIALS |
INGOT |
A large block of metal that is usually cast in a metal mould andforms the basic material for further rolling and processing. |
| MATERIALS |
INGOT IRON |
Commercially pure open hearth iron. |
| MATERIALS |
INSULATING MATERIALS (electrical) |
Materials which offer a very large resistance to flow of current and for that reason they are used tokeep the current in its proper path along the conductor. |
| MATERIALS |
INOCULATED IRONS |
Inoculated irons are high strength irons of suchcomposition that they would ordinarily be white as cast are ofteninoculated in the ladle with a silicon compound to cause graphitization.Typical agents used are ferosilicon, calcium silicide, Si-Mn-Zr,
orCa-Mn-Si in crushed form. |
| MATERIALS |
INVAR |
Nickel iron alloy (35-36% nickel, 0.5% carbon and 0.5%manganese, the remainder being iron) having a very low coefficient of thermal expansion at ordinary temperatures. |
| MATERIALS |
ION |
An atom, or group of atoms, that has gained or lost one or moreouter electrons and thus carries an electric charge. Positive ions, orcations, are deficient in outer electrons. Negative ions or anions, havean excess of outer electrons, thus ion
is electrostatically charged. |
| MATERIALS |
IRIDIUM 192 |
A radio isotope with a half-life of 74 days and 12dominant characteristic gamma radiation energies ranging from0.14-0.65 MeV. It is suitable as a gamma radiation source, mostly in radiography. |
| MATERIALS |
IRON |
Silver white metallic element, symbol Fe, and melting point 1535°C.Pure iron consists of homogenous crystal grains generally referred to asferrite. |
| MATERIALS |
IRON (wrought) |
Malleable iron produced from molten pig iron by a working or puddling process which removes the impurities. |
| MATERIALS |
KANTHAL |
It is an electrical resistance alloy of iron-chromium-aluminium with small additions of cobalt. About 25 per cent Cr, 5 per cent Al, 3per cent Co, and balance almost pure iron. |
| MATERIALS |
KAOLIN |
A fine white clay that is used in ceramics and refractories composedmostly of kaolinite, a hydrous silicate of aluminium. Impurities may cause various colours and tints. |
| MATERIALS |
KILLED STEEL |
Steel that has been deoxidized with agents such as siliconor aluminium to reduce the oxygen content to such a level that noreaction occurs between carbon and oxygen during solidification. Thisprevents gases from evolving during solidification. |
| MATERIALS |
LACQUER |
A quick drying automotive paint. |
| MATERIALS |
LAMELLAR |
An alternating plate like structure in metals (as in pearlite). |
| MATERIALS |
LAMINATE |
(1) A composite metal, usually in the form of sheet or bar,composed of two or more metal layers so bonded that the compositemetal forms a structural member. (2) To form a metallic product of two or more bonded layers. |
| MATERIALS |
LAMINATIONS |
Metal defects with separation or weakness generally aligned parallel to the worked surface of the metal. |
| MATERIALS |
LASER |
Light Amplification by Simulated Emission of Radiation. A devicein which heat is derived from the intense coherent beam of laser lightenergy. This intense, narrow beam of light is used in some welding andmachining operations. |
| MATERIALS |
LEAD |
Heavy, bluish grey, soft, ductile metal, which has a specific gravity of 11.3 and a melting point of 327°C, extensively used alone, and asthe basis of many antifriction alloys. |
| MATERIALS |
LEAD SCREEN |
In radiography, a screen is used (1) to filter out soft waveor scattered radiation and (2) to reduce the intensity of the remainingradiation so that the exposure time can be decreased. |
| MATERIALS |
LEDEBURITE |
The eutectic of the iron carbon system, the constituentsbeing austenite and cementite. The austenite decomposes into ferriteand cementite on cooling below the transformation temperature. |
| MATERIALS |
LIGNIN |
A substance that is related to cellulose, that with cellulose formsthe woody cell walls of plants and the material that cements themtogether. Methyl alcohol is derived from lignin in the destructivedistillation of wood. |
| MATERIALS |
LOAM |
Clayey sand mixture having the consistency of slime, and used inthe making of moulds and cores for heavy castings. |
| MATERIALS |
LOW CARBON STEEL |
Steel containing less than 0.3% carbon. |
| MATERIALS |
LUTE |
Fine adhesive composition of substances such as clay, sharp sand,plumbago and horsedung tempered with water. Used for sealing jointsin moulds and cores, for the purpose of making them air or metaltight. |
| MATERIALS |
MAGNESIUM |
A very light metal (about 106 Ibs/cuft) that alloys readily with aluminium and other metals. |
| MATERIALS |
MAGNESIUM ALLOY |
Alloy containing at least 85% of magnesium andhaving a specific gravity of 1.8, alloying elements include aluminium,manganese, zinc, and silicon. Widely used for aircraft components, their weight is only two thirds that of aluminium, and a quarter
of that of steel. |
| MATERIALS |
MAGNETICALLY HARD ALLOY |
A ferromagnetic alloy capable of beingmagnetized permanently because of its ability to retain inducedmagnetization and magnetic poles after the removal of externally appliedfields, an alloy with high coercive force. |
| MATERIALS |
MAGNETICALLY SOFT ALLOY |
A ferromagnetic alloy that becomesmagnetized readily upon the application of a field and that return topractically a non-magnetic condition when the field is removed, analloy with the properties of high magnetic permeability, low coercive force,
and low magnetic hysterisis loss. |
| MATERIALS |
MAGNOLIA METAL |
White metal bearing alloy containing 4.75-6%tin, 78-80% lead and 15-16% antimony. |
| MATERIALS |
MALLEABLE CAST IRON |
A cast iron made by a prolonged anneal of WHITE CAST IRON in which decarbonization or graphitization, orboth, takes place to eliminate some or all of the CEMENTITE. Thegraphite is in the form of temper carbon. This is less brittle than gray cast
iron. |
| MATERIALS |
MANGANESE |
A brittle, hard metallic element used as an alloy in steel togive it toughness to withstand wear and strain. |
| MATERIALS |
MANGANESE BRONZE |
A group of special alloys, not really bronzes atall, containing about 1% manganese , 60% copper, 40% zinc and smalltraces of iron, tin, lead or aluminium, the total percentage of these notexceeding 5%. |
| MATERIALS |
MARTENSITE |
An unstable constituent that is formed by heating andquenching steel. It is formed without diffusion and only below a certaintemperature known as M’s temperature. Martensite is the hardest of the transformation products of austenite, having an
acicular or needlelike microstructure. |
| MATERIALS |
MATTER |
Any substance which occupies space and has weight. The threeforms of matter are solids, liquids and gases. |
| MATERIALS |
MEDIUM CARBON STEEL |
Steel with a carbon content of 0.3-0.6%. |
| MATERIALS |
METAL |
An opaque lustrous elemental chemical substance that is a goodconductor of heat and electricity and when polished , a good reflectorof light. |
| MATERIALS |
METALLOID |
A non-metal that exhibits some, but not all, of the propertiesof a metal. Examples are sulphur, silicon, carbon, phosphorous and arsenic. |
| MATERIALS |
METALLURGY |
The science and study of the behaviours and propertiesof metals and their extraction from their ores. |
| MATERIALS |
MILD STEEL |
Carbon steel with a maximum of about 0.25% carbon. |
| MATERIALS |
MOLECULE |
The smallest portion to which a substance may be reducedby subdivision and still retain its chemical identity. |
| MATERIALS |
MOLYBDENUM |
Element used in alloying steel, including high speedsteel. It gives red hardness and increases the strength of steel at hightemperatures. It increases the corrosion resistance of stainless steels athigh temperatures, increases the machinability
of carbon steels andreduces the temper brittleness of aluminium steels. |
| MATERIALS |
MONEL METAL |
Trade name for a nickel copper alloy (67% nickel, 28%copper, 5% iron, manganese, and silicon combined) which exhibitshigh strength and toughness and corrosion resistance. |
| MATERIALS |
MU METAL |
Special alloy of nickel and iron, also containing copper andmanganese, requiring only a very small magnetizing force to produce anormal flux density i.e., the alloy is said to have high permeability (Greek letter MU for permeability). |
| MATERIALS |
MUNTZ METAL |
Alloy of brass family containing 60% copper and 40%zinc used for manufacturing condenser tubes. |
| MATERIALS |
MUSIC WIRE |
A high carbon steel wire of the highest quality used formaking mechanical springs. |
| MATERIALS |
MYCALEX |
It is the trade name for a ceramic product made up of glass-bonded mica flakes that possess a combination of properties found inother insulating materials. |
| MATERIALS |
NATURAL RUBBER |
Natural rubber is obtained in the form of a latexfrom the sap of Hevea brasiliensis and a few other plants. Crude rubberis coagulated by heat or by addition of electrolytes. |
| MATERIALS |
NAVAL BRASS |
Alloy containing from 57.5-59.5% copper, 0.6-1.0% tinand not more than 0.75% of impurities, the balance being zinc (addition of tin improves the resistance of the alloy to corrosion by sea water). Used for under-water fittings of marine craft. |
| MATERIALS |
NEOPRENE |
A synthetic rubber, highly resistant to oil, light, heat andoxidation. |
| MATERIALS |
NEUTRON |
Elementary nuclear particle with a mass approximately thesame as that of hydrogen atom and electrically neutral. |
| MATERIALS |
NICHROME |
Alloy of nickel and chromium which is practically non-corrosive, can withstand high temperature without oxidation and isused for furnace components. |
| MATERIALS |
NICKEL |
A strong, grayish, white, ductile metal, which has high resistanceto oxidation and corrosion. Therefore, used in pure form for someapplications, such as plating. It is more usually alloyed with other metals. |
| MATERIALS |
NICKEL BRONZE |
Bronze alloy of which there are two main series (1)low nickel bronze (nickel below 5%) used, for bronze castings, and (2)high nickel bronze (nickel over 10%) resistant to heat, and to corrosiveattack from chemical liquors. |
| MATERIALS |
NICKEL SILVER |
Also called GERMAN SILVER. Alloy with compositioncopper 60%, zinc 20%, and nickel 20%. Class of alloys used in themanufacture of electrical resistance coils and elements, decorative articlesfor which its lustrous colour (which increases in whiteness
with nickelcontent) make it very suitable, or for heavy duty works such as highpressure steam fittings. |
| MATERIALS |
NICROSILAL |
A nickel-chromium alloy cast iron having a composition1.7% carbon, 4.5% silicon, 0.8% manganese, 18.0% nickel, and 2%chromium, the balance is iron. |
| MATERIALS |
NIMONIC ALLOY |
Nickel base alloy possessing high resistance to heat andcorrosion, used for components in gas turbines and jet propulsion engines. |
| MATERIALS |
NIRESIST IRON |
Alloy cast iron (typical composition 14% nickel, 1.5%silicon, 1 % manganese, and 3% carbon and remainder iron) whichpossesses exceptional resistance to heat and corrosion. |
| MATERIALS |
NISPAN ALLOY |
Range of alloys having controlled expansion and elasticproperties. |
| MATERIALS |
NITENSYL |
Group of cast iron which have a tensile strength of 23-25tons./sq.inch by suitable heat treatment. A typical composition is 1.5% nickel, 1.5% silicon, 2.9% carbon and 0.8% manganese, thebalance being iron. |
| MATERIALS |
NITRALLOYS |
Nitralloys are the steels developed for nitriding process. Thecommonly used grades contain 0.20 to 0.40 per cent carbon, 0.9 to 1.5 percent Cr, 0.80 to 1.20 per cent Al, and small additions of Mo, Si, and Mn. |
| MATERIALS |
NODULAR CAST IRON |
A cast iron that has been treated while molten with a master alloy containing an element such as magnesium or ceriumto give primary graphite in the spherulitic form. |
| MATERIALS |
NODULAR GRAPHITE |
Graphite or carbon in the form of spheroids. |
| MATERIALS |
NOMAG |
Non-magnetic cast iron, used for castings in electric motorsand alternators and similar applications. A typical composition is11% nickel, 1.5% silicon, 3% total carbon, up to 7% manganese,the balance being iron. |
| MATERIALS |
NON-FERROUS |
Metals and alloys which do not contain any largeproportion of iron, examples being brass, copper, aluminium and lead. |
| MATERIALS |
NUCLEUS |
(1) The first structurally stable particle capable of initiatingrecrystallization of a phase or the growth of a new phase and possessingan interface with the parent matrix. (2) The heavy central core of anatom in which most of the mass and the
total positive electric chargeare concentrated. |
| MATERIALS |
NYLON |
A group of plastics of nitrogenous structure known as polyamides which are crystalline in nature and can be so processed as to orient thecrystals axially thus making the tensile strength of fibres extremely high. |
| MATERIALS |
OIL STONE |
An abrasive stone that is oiled and used to sharpen cuttingtools. |
| MATERIALS |
ORANGE PEEL |
A pebble grained surface which develops in forming of metals having coarse grains. |
| MATERIALS |
ORE |
A natural mineral that may be mined and treated for the extraction of any of its components, metallic or otherwise. |
| MATERIALS |
OSMIUM |
Osmium is the heaviest of all metals (sp gr. 22. 48), whichmelts at 4900°F and is harder than glass and quartz. |
| MATERIALS |
PARAMAGNETIC MATERIALS |
These materials are only feebly magnetic. |
| MATERIALS |
PARTING SAND |
Fine sand used for dusting on sand mould surfaces thatare to be separated. |
| MATERIALS |
PEARLITE |
The laminar mixture of ferrite and cementite in slowly coolediron carbon alloys as found in steel and cast iron. |
| MATERIALS |
PEARLITIC MALLEABLE IRON |
Irons made from the same or similarchemical compositions as regular malleable iron, but so alloyed or heattreated that some of the carbon in the resultant material is in thecombined form. |
| MATERIALS |
PERMANENT MAGNET |
Special magnet steel that retains its magneticpower indefinitely. |
| MATERIALS |
PETROCHEMICALS |
Chemicals derived from petroleum substances ormaterials manufactured from a component of crude oil or natural gas. |
| MATERIALS |
PEWTER |
Alloy containing 1.8% lead, 89.4% tin, 7% antimony and1.8% copper. |
| MATERIALS |
PHASE |
It is a portion of matter which is homogeneous in the sence thatits smallest adjacent parts are indistinguishable from one another. |
| MATERIALS |
PHASE DIAGRAM |
Phase diagram is also called equilibrium diagram orconstitution diagram, indicates the relative amount and compositionof phases present in an alloy at a given temperature and pressure, whenthe alloy is in equilibrium. |
| MATERIALS |
PHOSPHOROUS |
One of the elements, its chemical symbol is P. Its formula weight is 123.92, specific gravity 1.82, and melting point 44.1°C. |
| MATERIALS |
PHOSPHOR BRONZE |
Alloy containing 78.5-81.5% copper, 9-11 %tin, 9-11 % lead, 0.05-0.25% phosphorous and 0.75% zinc, hasexcellent antifriction properties. Used as bearing material. |
| MATERIALS |
PHOTON |
The smallest possible quantity of an electromagnetic radiationthat can be characterized by a definite frequency. |
| MATERIALS |
PIG IRON |
Iron produced from iron ore in the blast furnace, basic raw material from which all cast iron, wrought iron and steel are made.Usually contains about 4.5% carbon and impurities such asphosphorous, silicon and sulphur. |
| MATERIALS |
PITCH |
Usually coal tar pitch obtained in the manufacture of coke anddistilled off at about 175°C. |
| MATERIALS |
PLASMA |
An ionized gas of extremely high temperature achieved by passingan inert gas through an electric arc. Plasma arcs are used in welding,cutting and machining processes. |
| MATERIALS |
PLASTIC |
A certain group of natural and synthetic resins and theircompounds that can be moulded, cast, extruded or used for coatingsand films. |
| MATERIALS |
PLASTIC ELASTOMERS |
Plastic elastomers are materials which exhibitthe characteristics of rubber, but are of a basic chemical structure that isdecidedly different from that of natural rubber. |
| MATERIALS |
PLATINUM |
It is a silver-white heavy metal, unaffected by acids, air, or agreat variety of chemical agents. It is extensively used, either solid orclad, for chemical equipment. |
| MATERIALS |
POLYESTERS |
Polyesters are a reaction product of polyhydric alcohol anda dibasic acid plus monomer styrene or diallyl phthalate. In combination with glass fibres they form a product which has an outstanding strength- weight ratio. |
| MATERIALS |
POLYETHYLENES |
The product of straight chain polymerization of ethylene and are obtainable as viscous liquids, gums, and tough flexiblesolids suitable for moulding. |
| MATERIALS |
POLYMER |
A chemical compound or mixture of compounds formed by polymerization and consisting essentially of repeating structural units. |
| MATERIALS |
PORCELAIN |
Porcelain is a ceramic product made up of clays, quartz, andfeldspar used as high voltage insulator. |
| MATERIALS |
POWDER METALLURGY |
Forming parts out of powdered metal by compacting the powder into a mould under great pressure and heatingit. |
| MATERIALS |
PRECIOUS METAL |
One of the relatively scarce and valuable metals–gold, silver and platinum group of metals. |
| MATERIALS |
PROTON |
The positively charged particle in the nucleus of an atom. |
| MATERIALS |
PRUSSIAN BLUE |
A blue pigment, obtainable in tubes which is used tofind hot spots in a bearing. |
| MATERIALS |
QUICK SILVER |
Metallic mercury. |
| MATERIALS |
RADIO ACTIVE ELEMENT |
An element which has at least one isotopethat undergoes spontaneous nuclear disintegration to emit positive alphaparticles, negative beta particles or gamma rays. |
| MATERIALS |
RADIO ISOTOPE |
An isotope that emits ionizing radiation during itsspontaneous decay. |
| MATERIALS |
RADIUM |
A radio active element. It is found in nature as radium 226, which has a half-life of 1620 years. |
| MATERIALS |
RAZOR STEEL |
Steel containing 1.15-1.25% carbon. This steel is forgedat 816°C, and hardened at 750-775°C. It is tempered at 230°C tostraw colour. |
| MATERIALS |
RED BRASS |
A brass containing approximately 85% copper, 5% zinc, 5%tin and 5% lead. |
| MATERIALS |
RED ROCK SAND |
Open grain moulding sand obtained from red sandstone rocks, with good permeability but low bonding qualities. |
| MATERIALS |
REFRACTORY |
Materials that will resist change of shape, weight, or physicalproperties at high temperatures say exceeding 1000°C. These materialsare usually silica, fire clay, diaspore, alumina and kaolin. They are usedfor furnace linings. |
| MATERIALS |
RESIDUAL ELEMENTS |
Elements present in an alloy in small quantitiesbut not added intentionally. |
| MATERIALS |
RESIDUE |
The material that remains after completion of a chemical orphysical process, such as combustion, distillation, evaporation or filtration. |
| MATERIALS |
RESISTORS |
Poor conductors. |
| MATERIALS |
ROUGHING STONE (hone) |
A coarse honing stone. |
| MATERIALS |
RIMMED STEEL |
A low carbon steel (insufficiently deoxized) that duringsolidification releases considerable quantities of gases (mainly carbonmonoxide). When the mould top is not capped, a side and bottom rimof several centimeters forms. The solidified ingot
has got scattered blow holes and porosity in the center but a relatively thick skin free fromblow holes. |
| MATERIALS |
RUST |
A corrosion product containing hydrated oxide of iron. Appliedonly to ferrous alloys. |
| MATERIALS |
SAND (moulding) |
Substance used in foundries for making the moulds. |
| MATERIALS |
SCRAP |
Materials or metals that have lost their usefulness and are collectedfor reprocessing. |
| MATERIALS |
SEALANT |
A sealing agent that has some adhesive qualities, it is used toprevent leakage. |
| MATERIALS |
SEMICONDUCTORS |
A few substances containing metallic elements,have considerably less electrical conductivity. These contain a few electrons to give them conductivity intermediate between metals andinsulators. |
| MATERIALS |
SEMISTEEL |
Cast iron to which a small proportion of mild steel or wrought iron scrap is added during the melting of the pig iron so thatthe product will have a lower carbon content than the average iron,from 2.5-3.2% and which is tougher. |
| MATERIALS |
SILICA |
Silicon dioxide, SiO2 occurring in nature as quartz, opal etc. |
| MATERIALS |
SILICON |
Non-metallic element which can be added to steel, cast ironand non-ferrous alloys. It acts as a DEOXIDIZER, and also tends toform graphite by throwing the carbon out of solution and thereby increases the impact resistance of the steel, and, up
to a silicon contentof 1.75%, the elastic limit is increased also. |
| MATERIALS |
SILICON ALUMINIUM |
An alloy of 50% silicon, and 50% aluminiumused for making silicon additions to aluminium alloys. |
| MATERIALS |
SILICON BRASS |
A series of alloys containing 0.5-0.6% silicon, 1-19%zinc and a substantial amount of copper. |
| MATERIALS |
SILICON BRONZE |
Alloy containing about 90-95% of copper, to whichis added silicon and manganese, equivalent in strength to medium carbonsteel with resistance to corrosion and fatigue. |
| MATERIALS |
SILICON CARBIDE |
A refractory and abrasive material made by sand,coke, and saw dust in an electric arc furnance. |
| MATERIALS |
SILICON CARBIDE BRIQUETS |
Silicon carbide in BRIQUET formused as an inoculant and deoxidizer in cupola melted gray iron. |
| MATERIALS |
SILICON COPPER |
An alloy of silicon and copper, used as a deoxidizerand hardener in copper base alloys. |
| MATERIALS |
SILMANAL |
It is the name given to a rather expensive alloy of silver,manganese, and aluminium that has unusual magnetic properties forspecial applications. |
| MATERIALS |
SILVER |
A white, ductile metal that is an excellent conductor of heat andelectricity. |
| MATERIALS |
SILVERY IRON |
A type of pig iron containing 8-14% silicon, 1.5% carbonmax, 0.06% sulphur max and 0.15% phosphorous max. |
| MATERIALS |
SLAG |
The more or less completely fused and vitrified matter separatedduring the reduction of a metal from its ore. |
| MATERIALS |
SLURRY |
A watery mixture of insoluble material such as mud, lime orplaster of paris. |
| MATERIALS |
SMOG |
The irritating haze resulting from the sun’s effect on certainpollutants in the air, notably those from automobile exhaust. Also amixture of fog and smoke. |
| MATERIALS |
SMOKE |
Solid or liquid particles under 1 micron in diameter. Particlessuspended in air after incomplete combustion of materials containingcarbon. The matter in the exhaust emission which obscures thetransmission of light. |
| MATERIALS |
SODIUM SILICATE |
Na2SiO3-Also called water gas. |
| MATERIALS |
SOLDERING ALLOY |
Fusible alloy used to join together two metallicsurfaces with the aid of heat. Soft solder is an alloy of lead and tin, in which the proportions of the two constituents may vary from almostpure lead to almost pure tin. |
| MATERIALS |
SOLDERING FLUID |
Liquid flux used when soldering. |
| MATERIALS |
SOLID SOLUTIONS |
Solid solutions are alloys containing alloyingelements that are relatively soluble in the base metal in the solid state. |
| MATERIALS |
SOLUBLE OIL |
Specially prepared oil whose water emulsion is used as acutting or grinding fluid. |
| MATERIALS |
SOLUTE |
A substance that is dissolved in a solution and is present inminor amounts. |
| MATERIALS |
SOLVENT |
A substance that is capable of dissolving another substance andis the major constituent in a solution. |
| MATERIALS |
SORBITE |
Structure consisting of evenly distributed carbide of iron particlesin a mass of ferrite, formed when a fully hardened steel is tempered atbetween 550 and 650°C. |
| MATERIALS |
SPELTER |
Hard solder used during brazing containing 60% copper, 20%tin and 20% zinc. |
| MATERIALS |
SPHEROIDITE |
It is the structure in steel, in which cementite takes theform of rounded particles, or spheroids, instead of plates. |
| MATERIALS |
STAINLESS STEEL |
Steel which resists corrosion by the atmosphere andthe attack of acids and which does not scale when subjected to hightemperature. Alloy steels containing iron, atleast 11 % chromium, nickel,molybdenum and 0.1-1 % carbon. |
| MATERIALS |
STEATITE |
Steatite is the name given to a fired ceramic product whichcontains 80 per cent or more talc bonded with ceramic fluxes to a non-porous structure. |
| MATERIALS |
STEEL |
An alloy of iron and less than 2% carbon plus some impurities andsmall amounts of alloying elements is known as plain carbon steel. Thealloy steels contain substantial amounts of alloying elements such aschromium or nickel besides carbon. |
| MATERIALS |
STELLITE |
Non-ferrous alloy containing 35-80% cobalt, 10-40%chromium, 0-25% tungsten and 0-10% molybdenum. |
| MATERIALS |
SYNTHETIC MATERIALS |
A complex chemical compound which isartificially formed by the combination of two or more compounds orelements. |
| MATERIALS |
TERNARY ALLOY |
An alloy that contains three principal elements. |
| MATERIALS |
THERMIT |
Powdered form of finely divided iron oxide and aluminium which burns intensely to produce superheated liquid steel at atemperature of about 30.35°C, used for welding wrought iron andsteel forgings and castings. |
| MATERIALS |
THERMOPLASTICS |
Materials which when heated begin to soften attemperatures as low as 56.5°C, then can be moulded without any changein chemical structure. |
| MATERIALS |
THERMOSETTING MATERIALS |
Materials that undergo a chemical change when moulded and cannot be resoftend by heating to reshape them. |
| MATERIALS |
TIN |
A silvery white, soft metal used in solders and as a plating material. |
| MATERIALS |
TITANIUM |
A strong, grayish metal that weighs less than steel. |
| MATERIALS |
TOOL STEEL |
A special group of steels that is designed to specific uses,such as heat resistant steels that can be heat treated to produce certainproperties mainly hardness and wear resistance. |
| MATERIALS |
TROOSTITE |
Structure in steel (consisting of very finely divided ironcarbide in what is known as “alpha iron”) produced either by temperinga martensitic steel at between 250° and 450°C or by quenching steel ata speed sufficient to suppress the thermal change
point fully. |
| MATERIALS |
TUNGSTEN |
Hard, grayish, semiprecious metal with very high meltingpoint of 3300°C, used for electrical contacts, filaments in electric lampsetc. Used as an alloying element in high speed steel |
| MATERIALS |
TUNGSTEN CARBIDE |
An iron gray powder composed of carbon andtungsten and used in sintered form as a cutting tool material. |
| MATERIALS |
TUNGUM BRONZE |
Trade name for high strength bronze. |
| MATERIALS |
TWIN CRYSTAL |
A crystal grain in which the crystal lattices of two partsare related to each other in orientation as mirror images across the interfaceknown as the twinning plane. |
| MATERIALS |
VANADIUM |
A rare metal used as an alloying element in steel to improveshock resistance and forgeability. |
| MATERIALS |
VULCANATES |
Vulcanates are materials which reduce plasticity of therubber compound, while maintaining its elasticity. |
| MATERIALS |
WHITE IRON |
An extremely hard cast iron that results from pouring thehot metal into a mould with a chill plate in it. |
| MATERIALS |
WROUGHT IRON |
Contains 1-2% slag, which is distributed throughthe iron as threads and fibres imparting a tough fibrous structure. Usually contains less than 0.1 % carbon. It is tough, malleable, and relatively soft. |
| MATERIALS |
WROUGHT METALS |
These are metals furnished in the shapes resultingfrom the operations such as rolling, forging, drawing and extrusion. |
| MATERIALS |
YELLOW BRASS |
An alloy of about 70% copper and 30% zinc. |
| MATERIALS |
ZINC |
Bluish, grey metal with a melting point of 418°C, it becomes brittleat 200°C and can be powdered at this temperature. |
| MATERIALS |
ZIRCON |
Natural zirconium silicate, containing when pure 67.3%zirconium oxide, and 32.7% silica, and is used as a moulding medium. |
| MATERIAL PROPERTIES |
ACICULAR STRUCTURE |
A microstructure characterized by needleshaped constituents. |
| MATERIAL PROPERTIES |
ALLOTROPY |
Ability of a material to exist in several crystalline forms. |
| MATERIAL PROPERTIES |
AMORPHOUS |
Non-crystalline, a random orientation of the atomicstructure. |
| MATERIAL PROPERTIES |
ANISTROPY |
A material that has specific physical properties in differentdirections. Rolled steel is strongest in the direction of rolling. |
| MATERIAL PROPERTIES |
API GRAVITY |
Gravity expressed in units of standard American PetroleumInstitute (hydrometer). |
| MATERIAL PROPERTIES |
AUSTENITE |
A solid solution of cementite or iron carbide, Fe3C in iron. |
| MATERIAL PROPERTIES |
BANDED STRUCTURE |
A segregated structure of nearly parallel bandsaligned in the direction of working. |
| MATERIAL PROPERTIES |
BEL |
A unit denoting the ratio of power levels of signals or sound. The numberof bels may be given as the common logarithm of the ratio of powers. |
| MATERIAL PROPERTIES |
BETA RAY |
A ray of electrons emitted during the spontaneous disintegrationof certain atomic nuclei. |
| MATERIAL PROPERTIES |
BOILING POINT |
The temperature at which a liquid begins to boil. |
| MATERIAL PROPERTIES |
BOUND ELECTRONS |
The inner orbit of electrons around the nucleus of the atom. |
| MATERIAL PROPERTIES |
BREAKING POINT |
The final rupture of a material which is being pulledin tension, after it has reached its ultimate strength. |
| MATERIAL PROPERTIES |
BRINELL HARDNESS |
The hardness of metal or alloy measured by pressing a hard ball (usually 10 mm diameter) with a standard load into the specimen. A number is derived by measuring the indentation witha special microscope |
| MATERIAL PROPERTIES |
BRITTLE METAL |
A metal which exhibits only a very small change indimensions before it fractures. |
| MATERIAL PROPERTIES |
BRITTLENESS |
The property of materials to not deform under load, butto break suddenly, for example, cast iron and glass are brittle. Brittlenessis opposite to plasticity. |
| MATERIAL PROPERTIES |
BULK MODULUS OF ELASTICITY |
Ratio of a uniform, triaxial (equalin all directions) tensile or compressive stress to the change in volumeit produces. |
| MATERIAL PROPERTIES |
CAVITATION |
The formation and instantaneous collapse of innumerabletiny voids or cavities within a liquid subjected to rapid and intensepressure changes. |
| MATERIAL PROPERTIES |
CEMENTATION |
Process of introducing elements into the outer layer of metal objects by means of high temperature diffusion. |
| MATERIAL PROPERTIES |
CEMENTITE |
Iron carbide, Fe3C, a hard brittle, crystalline compoundobserved in the microstructure of iron base alloys. |
| MATERIAL PROPERTIES |
CHAFING FATIGUE |
Fatigue initiated in a surface damaged by rubbingagainst another body. |
| MATERIAL PROPERTIES |
CHLORINATION |
A refining or degasification process, wherein dry chlorine gas is passed through molten aluminium base and magnesiumbase alloys to remove entrapped oxides and dissolved gases. |
| MATERIAL PROPERTIES |
CLEAVAGE |
Splitting (fracture) of a crystal in a crystallographic plane of low index. |
| MATERIAL PROPERTIES |
CLEAVAGE FRACTURE |
A fracture, usually of a polycrystalline metal, in which most of the grains have failed by cleavage, resulting in brightreflecting facets. It is one type of crystalline fracture |
| MATERIAL PROPERTIES |
CLEAVAGE PLANE |
A characteristic crystallographic plane or set of planeson which cleavage fracture easily occurs. |
| MATERIAL PROPERTIES |
COALESCENCE |
The union of particles of a dispersed phase into largerunits, usually effected at temperatures below fusion point. |
| MATERIAL PROPERTIES |
COHESIVE STRENGTH |
(1) The hypothetical stress in an unnotchedbar causing tensile fracture without plastic deformation. (2) The stresscorresponding to the forces between atoms. |
| MATERIAL PROPERTIES |
COLD SHORT |
A condition of brittleness existing in some metals attemperatures below the recrystallization temperature. |
| MATERIAL PROPERTIES |
COLD SHUT |
(1) A discontinuity that appears on the surface of castmetal as a result of two streams of liquid meeting and failing to unite.(2) A portion of the surface of a forging that is separated, in part, fromthe main body of metal by oxide. |
| MATERIAL PROPERTIES |
COLUMNAR STRUCTURE |
A coarse structure of parallel columns of grains having the long axis perpendicular to the casting surface. |
| MATERIAL PROPERTIES |
COMPLETE FUSION |
Fusion which has occured over the entire basemetal surfaces exposed for welding. |
| MATERIAL PROPERTIES |
COMPOUND |
A combination of two or more elements that are mixedtogether. |
| MATERIAL PROPERTIES |
COMPRESSIBILITY |
The property of a substance (e.g., air) by virtue of which its density increases with increase in pressure. |
| MATERIAL PROPERTIES |
COMPRESSIVE STRENGTH (ultimate) |
The maximum stress that canbe applied to a brittle material in compression without fracture. |
| MATERIAL PROPERTIES |
COMPRESSIVE STRENGTH (yield) |
The maximum stress that can beapplied to a metal in compression without permanent deformation. |
| MATERIAL PROPERTIES |
COMPRESSIVE STRESS |
Compressive stress is compression load perunit area perpendicular to the load. |
| MATERIAL PROPERTIES |
CONDUCTIVITY |
The quality or power of conducting or transmittingheat, electricity etc. |
| MATERIAL PROPERTIES |
CONGRUENT TRANSFORMATION |
An isothermal or isobaric phasechange in which both of the phases concerned have the samecomposition throughout the process. |
| MATERIAL PROPERTIES |
COOLING STRESSES |
Residual stresses resulting from nonuniformdistribution of temperature during cooling. |
| MATERIAL PROPERTIES |
CORROSION |
The destructive chemical or electro-chemical reaction of amaterial and its environment, usually associated only with metals incontact with liquids. |
| MATERIAL PROPERTIES |
CORROSION EMBRITTLEMENT |
The severe loss of ductility of ametal resulting from corrosive attack, usually intergranular and oftennot visually apparent. |
| MATERIAL PROPERTIES |
CORROSION FATIGUE |
Effect of the application of repeated orfluctuating stresses in a corrosive environment characterized by shorter life than would be encountred as a result of either the repeated orfluctuating stresses alone or the corrosive environment alone. |
| MATERIAL PROPERTIES |
COUPON |
A piece of metal from which a test specimen is to be prepared,often an extra piece as on a casting or forging. |
| MATERIAL PROPERTIES |
COVALENT BOND |
A bond between two or more atoms resulting fromthe completion of shells by the sharing of electrons. |
| MATERIAL PROPERTIES |
CRAZING |
Minute surface cracks on the surface of materials often causedby thermal shock. |
| MATERIAL PROPERTIES |
CREEP |
Slow plastic deformation in steel and most structural metals causedby prolonged stress under the yield point at elevated temperatures. |
| MATERIAL PROPERTIES |
CREEP LIMIT |
(1)The maximum stress that will cause less than a specifiedquantity of creep in a given time. (2) The maximum nominal stressunder which the creep strain rate decreases continuously with the timeunder constant load and at constant temperature.
Sometimes calledCREEP STRENGTH. |
| MATERIAL PROPERTIES |
CRITICAL POINT |
The temperature or pressure at which a change incrystal structure, phase, or physical properties occur. |
| MATERIAL PROPERTIES |
CRYSTALLIZATION |
Act or process of forming crystals or bodies formedby elements or compounds solidifying so that they are bounded by plane surfaces. |
| MATERIAL PROPERTIES |
CRYSTAL UNIT STRUCTURE OR UNIT CELL |
The simplestpolyhedron that embodies all the structural characteristics of a crystaland makes up the lattice of a crystal by indefinite repetition. |
| MATERIAL PROPERTIES |
CURIE TEMPERATURE |
The temperature of magnetic transformationbelow which a metal or alloy is magnetic and above which it isparamagnetic. |
| MATERIAL PROPERTIES |
DAMAGING STRESS |
The minimum stress which, if exceeded in thematerial, would render the part unfit for service before the end of itsnormal expected life. |
| MATERIAL PROPERTIES |
DAMPING CAPACITY |
The ability to absorb vibration. More accurately defined as the amount of work dissipated into heat by a unit volumeof material during a completely reverse cycle of unit stress. |
| MATERIAL PROPERTIES |
DENDRITE |
A crystal formed during solidification of a metal or alloy characterized by a structure like that of a fir tree. |
| MATERIAL PROPERTIES |
DENSITY |
The ratio of the mass of a body to its volume. |
| MATERIAL PROPERTIES |
DUCTILE or MALLEABLE METAL |
A metal that may be worked to adifferent size or shape without breaking or shattering. |
| MATERIAL PROPERTIES |
DUCTILITY |
The property of a material to deform permanently or toexhibit plasticity, elongation or bending or twisting without rupture(breaking or cracking) while under tension. |
| MATERIAL PROPERTIES |
DYNAMIC CREEP |
Creep that occurs under the conditions of fluctuatingload or fluctuating temperature. |
| MATERIAL PROPERTIES |
ELASTIC DEFORMATION |
The movement or deflection of a material when an external load is applied that is less than the elastic limit. |
| MATERIAL PROPERTIES |
ELASTICITY |
The ability of a material to return to its original form afterthe load has been removed. |
| MATERIAL PROPERTIES |
ELASTIC LIMIT |
Maximum stress that can be applied to a metal withoutcausing plastic deformation that will remain after the load is relaxed to zero. |
| MATERIAL PROPERTIES |
ELASTIC RATIO |
It is the ratio of yield point stress to tensile strength of a metal. |
| MATERIAL PROPERTIES |
ELECTROLYSIS |
Chemical change resulting from the passage of an electriccurrent through an electrolyte. |
| MATERIAL PROPERTIES |
ELONGATION |
Elongation is the strain produced by uniaxial tension. |
| MATERIAL PROPERTIES |
EMBRITTLEMENT |
Reduction in the normal ductility of a metal dueto a physical or chemical change. |
| MATERIAL PROPERTIES |
ENDURANCE LIMIT |
The limiting stress below which the metal will withstand without fracture an infinitely large number of cycles of stress. |
| MATERIAL PROPERTIES |
ENDURANCE RATIO |
It is the ratio between the endurance limit totensile strength. |
| MATERIAL PROPERTIES |
EUTECTIC |
The alloy which has the lowest melting point possible for agiven composition. |
| MATERIAL PROPERTIES |
EUTECTOID |
A solid solution of any series which cools without changeto its temperature of final composition. |
| MATERIAL PROPERTIES |
FACTOR OF SAFETY |
The ratio of the damaging stress to working stress. |
| MATERIAL PROPERTIES |
FATIGUE IN METALS |
The tendency in a metal to fail, breaking orcracking under conditions of repeated cyclical stressing that take place well below the ultimate tensile strength. |
| MATERIAL PROPERTIES |
FATIGUE STRENGTH |
The amount of stress that can be applied to ametal without failure while it is subjected to ten million or more cyclesof load reversals. In mild steel, the fatigue strength is about 50 per centof the tensile strength. |
| MATERIAL PROPERTIES |
FERRITE |
Iron practically carbon free. It forms a body centered cube latticeand may hold in solution considerable amounts of silicon, nickel orphosphorous. |
| MATERIAL PROPERTIES |
FLUIDITY |
Ability of molten metal to flow readily, usually measured by the length of a standard spiral casting. |
| MATERIAL PROPERTIES |
FRACTURE STRESS |
The maximum principal true stress at fracture.Usually refers to unnotched tensile specimens. |
| MATERIAL PROPERTIES |
FREE ELECTRONS |
Electrons which are in the outer orbit of the atomsnucleus. |
| MATERIAL PROPERTIES |
GRAIN BOUNDARY |
The outer perimeter of a single grain where it is incontact with adjacent grains. |
| MATERIAL PROPERTIES |
GRAIN GROWTH OR RECRYSTALLIZATION |
Metal grains begin toreform to larger and more regular size and shape at certain temperatures,depending to some extent on the amount of prior cold working. |
| MATERIAL PROPERTIES |
GRAIN REFINER |
A material added to a molten metal to attain finergrains in the final structure. |
| MATERIAL PROPERTIES |
GRAIN SIZE |
For metals, a measure of the area or volume of grains inpolycrystalline material, usually expressed as an average when theindividual sizes are fairly uniform. Reported in terms of number of grains per unit area or volume, average diameter, or
as a grain sizenumber derived from area measurements |
| MATERIAL PROPERTIES |
GRANULAR PEARLITE |
A structure formed from ordinary lamellarpearlite by long annealing at a temperature below but near to thecritical point, causing the cementite to spheroidize in a ferrite matrix. |
| MATERIAL PROPERTIES |
GROWTH |
With reference to cast iron, permanent increase in volume thatresults from continued or repeated cyclic heating and cooling at elevatedtemperatures. |
| MATERIAL PROPERTIES |
HALF-LIFE |
The characteristic time required for half of the nuclei of aradioactive species to disintegrate spontaneously. |
| MATERIAL PROPERTIES |
HARDENABILITY |
The property that determines the depth and distributionof hardness in a ferrous alloy induced by heating and quenching. |
| MATERIAL PROPERTIES |
HARDNESS |
The property of metal to resist being permanently deformed.This is divided into three categories, resistance to penetration, resistanceto abrasion and elastic hardness. |
| MATERIAL PROPERTIES |
HOT SHORT |
Brittleness in hot metal. The presence of excess amounts of sulphur in steel causes hot shortness. |
| MATERIAL PROPERTIES |
HYDROGEN EMBRITTLEMENT |
A condition of low ductility in metalsresulting from the absorption of hydrogen. |
| MATERIAL PROPERTIES |
IMPACT TEST |
A test in which small notched specimens are broken inIzod-Charpy machine. This test determines the notch toughness of ametal. |
| MATERIAL PROPERTIES |
INCLUSIONS |
Impurities, usually oxides, sulphides, silicates and similarcompounds, retained from the ore or from processing. |
| MATERIAL PROPERTIES |
INFRARED RADIATION |
Electromagnetic energy with wave lengthsfrom 770 to 1200 nanometers |
| MATERIAL PROPERTIES |
ISOTROPY |
Quality of having identical properties in all directions. |
| MATERIAL PROPERTIES |
KISH |
Graphite thrown out by liquid cast iron in cooling. |
| MATERIAL PROPERTIES |
KNOOP HARDNESS |
Microhardness determined from the resistance of metal to indentation by a pyramidal diamond indenter, having edgeangles of 172° and 32 minutes and 130°, making a rhombohedralimpression with one long and one short diagonal. |
| MATERIAL PROPERTIES |
LATTICE, SPACE |
The term that is used to denote a regular array of points inspace. For example, the sites of atoms in a crystal. The points of the threedimensional space lattice are constructed by the repeated application of the basic translations that carry
a unit cell into its neighbour. |
| MATERIAL PROPERTIES |
LIQUIDUS |
The temperature at which freezing begins during cooling andends during heating under equilibrium conditions, represented by aline on a two phase diagram. |
| MATERIAL PROPERTIES |
MACHINABILITY |
The relative ease of machining that is related to thehardness of the material to be cut. |
| MATERIAL PROPERTIES |
MACROSTRUCTURE |
The structure of metals as revealed by examinationof the etched surface of a polished specimen at a magnification notexceeding ten diameters. |
| MATERIAL PROPERTIES |
MALLEABILITY |
In metals, the property of being able to undergomechanical deformation (flattened by rolling or hammering) without rupturing or developing a marked increase in resistance to change of shape. |
| MATERIAL PROPERTIES |
MELTING POINT |
The temperature at which a pure metal, compoundor eutectic changes from solid to liquid, the temperature at which theliquid and the solid are in equilibrium. |
| MATERIAL PROPERTIES |
MICROPOROSITY |
Porosity visible only with the aid of microscope. |
| MATERIAL PROPERTIES |
MICROSTRUCTURE |
The structure of polished or etched metalspecimens as seen enlarged through a microscope. |
| MATERIAL PROPERTIES |
MODULUS OF ELASTICITY |
A measure of the rigidity of metal. Ratioof stress, within proportional limit, to corresponding strain. Also calledELASTIC MODULUS and COEFFICIENT OF ELASTICITY and YOUNGS MODULUS |
| MATERIAL PROPERTIES |
MODULUS OF RIGIDITY |
Ratio of shearing stress to shearing strain, within the proportional limit. |
| MATERIAL PROPERTIES |
MODULUS OF RUPTURE |
A fictitious stress calculated for either bendingor torsion tests on the basis of the load causing failure, and the assumptionthat the elastic equation for stress applies up to the point of failure. |
| MATERIAL PROPERTIES |
Ms TEMPERATURE |
The temperature at which martensite begins toform in an alloy system on cooling. |
| MATERIAL PROPERTIES |
MOTTLED |
White iron structure interpersed with spots or flecks of gray. |
| MATERIAL PROPERTIES |
NOTCH BRITTLENESS |
Susceptibility of a material to brittle fracture atpoints of stress concentration. |
| MATERIAL PROPERTIES |
NOTCH DUCTILITY |
The percentage reduction in area after completeseparation of the metal in a notch tensile test. |
| MATERIAL PROPERTIES |
NOTCH RUPTURE STRENGTH |
he ratio of applied load to originalarea of the minimum cross-section in a stress rupture test of a notchedspecimen. |
| MATERIAL PROPERTIES |
NOTCH SENSITIVITY |
A measure of the reduction in strength of ametal caused by the presence of stress concentration. |
| MATERIAL PROPERTIES |
NOTCH TOUGHNESS |
The resistance to fracture of a metal specimenhaving a notch or groove when subjected to a sudden load, usually tested on an Izod-Charpy testing machine. |
| MATERIAL PROPERTIES |
OILINESS |
The capacity of the lubricant to stick on to the surface underconditions of heavy load. |
| MATERIAL PROPERTIES |
OXIDATION |
The slow or rapid reaction of oxygen with other elements,burning. In metals, over oxidation during heating under oxidizingconditions often results in permanent damage to metals. |
| MATERIAL PROPERTIES |
OXIDATION REDUCTION |
A chemical reaction in which one or moreelectrons are transferred from one atom or molecule to another. |
| MATERIAL PROPERTIES |
PEARLITE |
A micro constituent of iron and steel consisting of alternativelayers of ferrite and iron carbide or cementite. |
| MATERIAL PROPERTIES |
PEEL LOAD |
In metal, plastics or composites, the force that acts to peelapart joined pieces. |
| MATERIAL PROPERTIES |
PH |
The negative logarithm of the hydrogen ion activity. It denotes thedegree of acidity or basicity of a solution. |
| MATERIAL PROPERTIES |
PERMEABILITY |
In casting of metals, the term is used to define theporosity of foundry sands in moulds and the ability of trapped gasesto escape through the sand. |
| MATERIAL PROPERTIES |
PERMANENT SET |
When a metal remains deformed from its originaldimensions after the forces applied to it have been reduced to zero, itis said to have undergone plastic deformation, and the amount of deformation is called the permanent set. |
| MATERIAL PROPERTIES |
PHASE |
A portion of an alloy, physically homogeneous throughout, that isseparated from the rest of the alloy by distinct BOUNDARY surfaces.The following phases occur in the iron carbon alloy, molten alloy;austenite, ferrite, cementite, and graphite. |
| MATERIAL PROPERTIES |
PHYSICAL CHANGE |
A change which does not alter the composition of the molecules of a substance. |
| MATERIAL PROPERTIES |
PIEZOELECTRIC EFFECT |
The reversible interaction, exhibited by somecrystalline materials between an elastic strain and an electric field.The direction of the strain is dependant upon the polarity of the field. |
| MATERIAL PROPERTIES |
PLASTICITY |
The quality of material such that it can be deformed withoutbreaking. Clay is completely a plastic material. Metals exhibit plasticity in varying amounts. |
| MATERIAL PROPERTIES |
PLASTIC DEFORMATION |
Deformation that does or will remainpermanent after the removal of load which caused it. |
| MATERIAL PROPERTIES |
POISSON’S RATIO |
When a rod of elastic material is elongated by stretching(strain), the lateral (crosswise) dimensions will contract. Poisson’s ratiois the ratio between the strain and the amount of lateral contraction. |
| MATERIAL PROPERTIES |
PROPORTIONAL LIMIT |
Proportional limit is the value of stress at which the stress strain curve first bends to the right. The proportionallimit is high for steels and low for cast iron, copper, and aluminium. |
| MATERIAL PROPERTIES |
PROOF LOAD |
A predetermined load, generally some multiple of theservice load, to which a specimen or structure is submitted beforeacceptance for use. |
| MATERIAL PROPERTIES |
PROOF, RESILIENCE |
Maximum amount of elastic energy that may bestored without permanent deformation in the material during its firstloading cycle. |
| MATERIAL PROPERTIES |
RADIOACTIVITY |
The spontaneous nuclear disintegration with emissionof corpuscular or electromagnetic radiation. |
| MATERIAL PROPERTIES |
RESIDUAL STRESS |
Stress induced within the structure of a material by cold working, machining, and heat treatments. |
| MATERIAL PROPERTIES |
RESILIENCE |
Ability of a material to store elastic energy withoutpermanent deformation. |
| MATERIAL PROPERTIES |
RETENTIVITY |
The capacity of a material to retain a portion of themagnetic field set up in it after the magnetizing force is removed. |
| MATERIAL PROPERTIES |
ROCKWELL HARDNESS |
Hardness test that uses a penetrator and known weights. Several scales are used to cover very soft to very hard materials.The Rockwell C scale is used mostly for steel. |
| MATERIAL PROPERTIES |
SACRIFICIAL ANODE |
A metal slug, usually magnesium and zinc,designed to concentrate galvanic corrosion upon itself and thus save amore important structure on which the anode is attached, such as aship’s hull or a burried pipe line. |
| MATERIAL PROPERTIES |
SCRATCH HARDNESS |
The hardness of a metal determined by the widthof a scratch made by a cutting point drawn across the surface under agiven pressure. |
| MATERIAL PROPERTIES |
SEGREGATION |
Non-uniform distribution of alloying elements,impurities or microphases. |
| MATERIAL PROPERTIES |
SHEARING |
A concentration of forces in which the bending moment isvirtually zero and the metal tends to tear or to be cut along a transversalaxis at the point of applied pressure. |
| MATERIAL PROPERTIES |
SHEAR LOAD |
A load that tends to force materials apart by application of side slip action. |
| MATERIAL PROPERTIES |
SHEAR STRESS |
Shear stress is the shear load per unit area, exerted betweenthe material on one side of an imaginary plane of separation in the partand the material on the other side. |
| MATERIAL PROPERTIES |
SHORTNESS |
A form of brittleness in metal. It is designated as cold, hotand red to indicate the temperature range in which the brittlenessoccurs. |
| MATERIAL PROPERTIES |
SKELP |
A name of the semifinished steel of which butt-welded pipe ismade. |
| MATERIAL PROPERTIES |
SLAG (dross) |
A fused product that occurs in the melting of metals and iscomposed of oxidized impurities of a metal and a fluxing substancesuch as limestone. The slag protects the metal from oxidation by theatmosphere since it floats on the surface of the molten
metal. |
| MATERIAL PROPERTIES |
SLIP PLANES |
Also called slip bands. These are lines that appear on thepolished surface of a plastically deformed metal. The slip bands are theresult of crystal displacement, defining planes in which shear has takenplace. |
| MATERIAL PROPERTIES |
SOLID SOLUTION |
Found in metals at temperatures below the solidus.Some of the types of solid solutions are continuous, intermediate,interstitial, substitutional and terminal. |
| MATERIAL PROPERTIES |
SOLIDUS |
Seen as a line in a two phase diagram, it represents thetemperatures at which freezing ends when cooling, or melting begins when heating under equilibrium conditions. |
| MATERIAL PROPERTIES |
SOLUBILITY |
The degree to which one substance will dissolve in another. |
| MATERIAL PROPERTIES |
SPALLING |
Breaking small pieces from a surface, often caused by thermal shock. |
| MATERIAL PROPERTIES |
SPECIFIC GRAVITY |
A numerical value that represents the weight of agiven substance with the weight of an equal volume of water. Thespecific gravity for pure water is taken as 1.000. |
| MATERIAL PROPERTIES |
SPHEROIDIZING |
Consists of holding carbon steel for a period of timeat just under the transformation temperature (heating and cooling). An aggregate of globular carbide is formed from other microstructuressuch as pearlite. |
| MATERIAL PROPERTIES |
SPRING BACK |
The tendency of a formed metal part to return to someextent to its former shape because of the elasticity of the metal. |
| MATERIAL PROPERTIES |
SPUTTERING |
To dislodge atoms from the surface of a material by collision with high energy particles for the purpose of depositing a metallic filmon a part. |
| MATERIAL PROPERTIES |
STIFFNESS |
The ability of a metal or shape to resist elastic deformation.For identical shapes, the stiffness is proportional to the modulus of elasticity. |
| MATERIAL PROPERTIES |
STRAIN |
The measure of the change in the size or shape of a body, referredto its original size or shape. This is unit deformation of a metal whenstress is applied. |
| MATERIAL PROPERTIES |
STRENGTH |
The ability of a material to resist external forces. It is calledtensile, compressive, or shear strength depending on the load. |
| MATERIAL PROPERTIES |
STRESS |
The load per unit area on a stress strain diagram. |
| MATERIAL PROPERTIES |
STRESS, TENSILE |
Refers to an object loaded in tension, denoting thelongitudinal force that causes the fibres of a material to elongate. |
| MATERIAL PROPERTIES |
STRESS, COMPRESSIVE |
Refers to a member loaded in compression, which either gives rise to a given reduction in volume or a transversedisplacement of the material. |
| MATERIAL PROPERTIES |
STRESS, SHEAR |
Refers to a force that lies in a parallel plane. The force tendsto cause the plane of the area involved to slide on the adjacent planes. |
| MATERIAL PROPERTIES |
STRESS, TORSION |
The shearing stress that occurs at any point in abody as the result of an applied torque or torsional load. |
| MATERIAL PROPERTIES |
STRESS RAISER |
Can be a notch, nick, weld under cut, sharp change insection, or machining grooves or hairline cracks that provide aconcentration of stresses when the metal is under tensile stress. Stressraisers pose a particular problem and can cause early failure
in membersthat are subjected to many cycles of stress reversals. |
| MATERIAL PROPERTIES |
STRESS RELIEF ANNEAL |
The reduction of residual stress in a metalpart by heating it to a given temperature and holding it there for asuitable length of time. This treatment is used to relieve stresses causedby welding, cold working, machinning, casting and quenching. |
| MATERIAL PROPERTIES |
SUPER-CONDUCTIVITY |
Property of zero electrical resistance (and zeromagnetic induction) acquired by some metals at very low temperatures. |
| MATERIAL PROPERTIES |
SURFACE TENSION |
Interfacial tension between two phases one of whichis a gas. |
| MATERIAL PROPERTIES |
TARNISHING |
A chemical reaction of a metal with its environment whichresults in formation of films which coat the metal. |
| MATERIAL PROPERTIES |
TEMPER |
(1) In ferrous metals, the stress relief of steels that are hardenedby quenching for the purpose of toughening them and reducing their BRITTLENESS. (2) In non-ferrous metals, temper is a conditionproduced by mechanical treatment such as cold working.
An alloy may be cold worked to the hard temper, fully softened to the anealed temper,or two intermediate tempers. |
| MATERIAL PROPERTIES |
TENSION LOAD |
A load applied to joined parts that attempts to separatethem by a pulling or stretching action. |
| MATERIAL PROPERTIES |
TENSILE STRESS |
Tensile stress is the tension load per unit areaperpendicular to the load. |
| MATERIAL PROPERTIES |
THERMAL CONDUCTIVITY |
The quantity of heat that is transmittedper unit time, per unit cross-section, per unit temperature gradientthrough a given substance. All materials are in some measure conductorsof heat. |
| MATERIAL PROPERTIES |
THERMAL EXPANSION |
The increase of the dimension of a materialthat results from the increased movement of atoms caused by increasedtemperature. |
| MATERIAL PROPERTIES |
THERMAL SHOCK |
A stress induced on the surface of a material such ascarbide tools or fire brick caused by a rapid rate of heating and surfaceexpansion. |
| MATERIAL PROPERTIES |
THERMAL STRESS |
Shear stress that is induced in a material due tounequal heating or cooling rates. The difference of expansion andcontraction between the interior and exterior surfaces of a metal that isbeing heated or cooled is an example. |
| MATERIAL PROPERTIES |
THERMOPLASTIC |
Material capable of softening or fusing when heatedand of hardening again when cooled. |
| MATERIAL PROPERTIES |
THERMOSETTING |
Material capable of becoming permanently rigid when cured by heating, will not soften by reheating. |
| MATERIAL PROPERTIES |
TOUGHNESS |
Ability of a metal to absorb energy and deform plastically before fracturing. Work per unit volume required to fracture a metaland is equal to the area under the stress strain curve. |
| MATERIAL PROPERTIES |
TOXICITY |
The degree of danger posed by a substance to animal or plant life. |
| MATERIAL PROPERTIES |
TRANSFORMATION TEMPERATURE |
The temperature at which onephase transforms into another phase, for example, where ferrite or alphairon transforms into austenite or gamma iron. |
| MATERIAL PROPERTIES |
TRANSITION TEMPERATURE |
The temperature at which normally ductile metals become brittle. |
| MATERIAL PROPERTIES |
ULTIMATE STRENGTH |
Maximum conventional stress, tensile,compressive or shear that a material can withstand. The highest strengththat a metal exhibits after it begins to deform plastically under load.Rupture of the material occurs either at the peak of its ultimate
strengthor at a point of further elongation and at a drop in stress load |
| MATERIAL PROPERTIES |
VALENCY |
The capacity of an atom to combine with other atoms to forma molecule. The inert gases have zero valence, valence is determined by considering the positive and negative atoms as determined by the atomsgaining or losing of valence electrons. |
| MATERIAL PROPERTIES |
VISCOSITY |
The property of the fluids, either liquid or gaseous, whichcauses them to resist instantaneous change of shape or instantaneousrearrangement of their parts, due to internal friction. |
| MATERIAL PROPERTIES |
VOID |
A cavity or hole in a substance. |
| MATERIAL PROPERTIES |
WEAR |
A surface deterioration of contacting surfaces that destroys theiroperating relationship, or causes rupture if carried far enough. |
| MATERIAL PROPERTIES |
WELDMENT |
A unit formed by welding together an assembly of pieces. |
| MATERIAL PROPERTIES |
WORKING STRESS |
The actual stress that the part will be designed tohandle. |
| MATERIAL PROPERTIES |
YIELD POINT |
The stress at which a marked increase in deformationoccurs without an increase in load stress as seen in mild steel or mediumcarbon steel. This phenomenon is not seen in non-ferrous metals andother alloy steels. |
| PROCESSES |
AGING OF A PERMANENT MAGNET |
It is the process of normal oraccelerated change, under continued normal or specified artificialconditions, in the strength of the magnetic field maintained. |
| PROCESSES |
ARC WELDING |
Method of welding or uniting two metallic pieces in which the metal is melted by the heat of an electric arc. |
| PROCESSES |
ATOMIC HYDROGEN WELDING |
Welding of metallic pieces in whichheat is liberated by hydrogen atoms when combining into molecules,is used to fuse the metal. |
| PROCESSES |
AUTOMATIC ARC WELDING |
Method of arc welding in which the arcmoves along the joint to be welded, feeds the electrodes to the arc, andgoverns the arc length, by automatic means. |
| PROCESSES |
BEADING |
Process of forming a bead or lapped edge on a sheet metalarticle. |
| PROCESSES |
BENDING (by forging) |
In bending there is a thinning of the material,accompanied by a spreading of the metal on the inside of the bendand a narrowing at the outside. |
| PROCESSES |
BLANKING |
Cutting or shearing a shape (called blank) with a die fromsheet metal stock. The hole material is saved and used for furtheroperation. |
| PROCESSES |
BLAST CLEANING |
Blast cleaning involves the forcing of a stream orspray of sand or other abrasive material against the surface of metal,stone, and other materials by means of compressed air. |
| PROCESSES |
BORING |
Opening out or increasing the diameter of an existing drilled orcored hole by means of a boring tool. |
| PROCESSES |
BRAZING |
Joining two pieces of metal without melting either one by using a brazing alloy (copper zinc alloy i.e., brass) that melts at a lowertemperature than the materials being joined. |
| PROCESSES |
BROACHING |
Consecutive shearing of a hole or contour by a series of stepped cutting edges similar to a saw used in low acting presses foraccurate sizing of holes or contours, such as gear teeth, and keyways. |
| PROCESSES |
BURNISHING |
Bright, polished finish produced on the surface of a metalby rubbing it with another metallic harder surface, which smooths outsmall scratch marks. |
| PROCESSES |
BUTT-WELDING |
Form of electrical resistance welding, the passage of current between the ends of the sections to be joined causing a rise intemperature sufficient to fuse the metal. |
| PROCESSES |
CALENDERING |
A process that involves rolling of the product into sheetsto achieve the desired surface finishes and thickness. |
| PROCESSES |
CASTING |
Process of producing a metal object by pouring molten metalinto a mould. |
| PROCESSES |
COINING (embossing |
Shaping a piece of a metal in a mould or dieoften creating raised figures or numbers. |
| PROCESSES |
COLD DRAWING |
Reducing the cross section of a metal bar or rod by drawing it through a die, at a temperature below the recrystallizationrange, usually room temperature. |
| PROCESSES |
COLD ROLLING |
Reducing the cross-section of a metal bar in a rollingmill below the recrystallization temperature, usually room temperature. |
| PROCESSES |
COLD SAWING |
Any sawing process in which the chips are not heated tothe softened state. |
| PROCESSES |
COLD WORKING |
Deforming a metal plastically at a temperature below its lowest recrystallization temperature. Strain hardening occurs as aresult of this permanent deformation. |
| PROCESSES |
CONFINED FLOW |
Confined flow is the basis of drop forging and hotpressing. In this, the metal is ultimately confined in all directions, beingforced to behave as pasty fluid in filling every portion of the confiningcavity. |
| PROCESSES |
CENTERLESS GRINDING |
Method of grinding metallic parts in whichthe piece to be ground (circular piece) is supported on a work rest, andpassed between a grinding wheel running at a high speed and a controlling wheel running at a slow speed. |
| PROCESSES |
CENTRIFUGING |
Casting of molten metals by using centrifugal forceinstead of gravity. The mould (or moulds) is rotated about a centre where molten metal is poured and allowed to follow sprues outwardand get into the mould cavity. |
| PROCESSES |
CENTRIFUGAL CASTINGS |
Castings of cylindrical design are made by the introduction of molten metal into revolving permanent moulds,known as centrifugal casting machines, where the centrifugal force isemployed to bring pressure in filling of the mould. |
| PROCESSES |
CLADDING |
The joining of one metal (usually sheet or plate) to anotherby using heat and pressure or by an explosive force. With this method,a thin sheet of more expensive metal or one less likely to corrode may be applied to a less expensive metal or one
more likely to corrode. |
| PROCESSES |
CLIMB MILLING |
Milling process in which the work is fed in the samedirection as the path of the teeth on the cutter, below the arbor. |
| PROCESSES |
COUNTER SINKING |
It is the opening out of the ends of a hole to form aconical hollow for receiving the head of a countersunk screw, rivet or bolt. |
| PROCESSES |
CRIMPING |
Producing flutes or corrugations. Often used to gather metalas for stovepipe joints. |
| PROCESSES |
CROWNING |
Shaping of the rim of a belt pulley so that the diameter atthe centre of the face is greater than at the edges so as to keep the belton the crown of the pulley. |
| PROCESSES |
CUPPING |
Process in which a flat blank is converted into a cup like form. |
| PROCESSES |
CUT OFF |
An operation that shears a stamping from a strip or bar. |
| PROCESSES |
DEFORMATION |
Alteration of the form or shape as a result of the plasticbehaviour of a metal under stress. |
| PROCESSES |
DIECASTING |
Casting metal into a metallic mould by using pressureinstead of gravity or centrifugal force. |
| PROCESSES |
DIFFUSION |
The process of atoms or other particles intermingling withina solution. In solids, it is a slow movement of atoms from areas of high concentration towards areas of low concentration. The processmay be (a) migration of interstitial atoms such as
carbon, (b) movementof vacancies or (c ) direct exchange of atoms to neighbouring sites. |
| PROCESSES |
DINKING |
Cutting of non-metallic articles from the sheet, usually involvingsuch operations as blanking and piercing. |
| PROCESSES |
DRAW FILING |
Finishing operation in filing during which the file ismoved in the direction of the greater length of the work, being heldlike a spokeshave. |
| PROCESSES |
DRAWING |
Process, in press work, which involves reducing the diameteror cross-sectional dimensions of a cup, shell, tube, bar or wire. |
| PROCESSES |
DRILLING |
Power or hand operated method for the production of holesin metal or other solid materials with a drill. |
| PROCESSES |
DROP FORGING |
Drop forging is the operation in which a metal part isformed by repeated hammer blows on a bar or billet placed between apair of dies containing the impression of the finished shape desired. |
| PROCESSES |
EDGING |
Edging is a gathering operation. Here the metal is displaced tothe desired shape by striking it between two dies. As the dies strike, thestock, metal is gathered toward the center of the cavity and somesideways movement also takes place. |
| PROCESSES |
ELECTRON BEAM WELDING |
The fusion of material by energy imparted from an intense beam of electrons. |
| PROCESSES |
ELECTROPLATING |
Coating an object with a thin layer of metal throughelectrolytic deposition. |
| PROCESSES |
ELECTRIC RESISTANCE WELDING |
Uniting the parts by heating themto welding temperatures and then forcing the ends together by mechanical pressure. |
| PROCESSES |
EMBOSSING |
Operation of raising a design or form above the surface of a component by means of high pressure effected by pressing orsqueezing action. |
| PROCESSES |
ETCHING |
Process of marking a metal by eating into it with an acid orother chemical. |
| PROCESSES |
EXFOLIATION |
Cracking of the outer skin of the metal. |
| PROCESSES |
EXTRUSION |
Process in which metal (often heated) is caused to flow througha restricted orifice by using an extremely high force, so creating an extremely elongated strip of uniform, but comparatively small cross-section. |
| PROCESSES |
FELLOWS PROCESS |
Method of generating involute gear teeth by theuse of pinion shaped cutter. |
| PROCESSES |
FETTLING |
Operation of removing any sand left on the casting from themould and core, and also the removal of surplus metal that is always associated with castings direct from the foundry, such as runners, risers,feeders and so on. |
| PROCESSES |
FILAMENT WINDING |
A composite manufacturing process where theend product is to have a hollow internal shape. A filament of the fibreis wound around a form, then bonded in place with the resin matrix. |
| PROCESSES |
FILE CUTTING |
Incising the teeth on a file blank by means of amechanically driven chisel of high speed steel. |
| PROCESSES |
FILING |
Operation of smoothing a rough surface or reducing the thicknessof a piece of material with a file. |
| PROCESSES |
FITTING |
Finishing of mating parts to dimensions which will allow thedesired tightness or freedom of movement on assembly. |
| PROCESSES |
FLANGING |
any process producing a flange. A flange may drawn on ashell or a tube. |
| PROCESSES |
FLASH WELDING |
Method of electric resistance welding of sections of material by the formation of an electric arc between the edges of thepieces to be joined and then pressing together with a light pressurethe molten edges. |
| PROCESSES |
FLATTING |
Finishing operation carried out at the end of the work cycleto remove the various hammer marks on the surface left in by theprevious shaping operations. |
| PROCESSES |
FLOAT GLASS |
A glass manufacturing process that produces a continuoussheet or ribbon of glass. |
| PROCESSES |
FORGING |
A method of metal working in which the metal is hammeredinto the desired shape, or is forced into a mould by pressure orhammering, usually after being heated to a more plastic state. Hotforging requires less force to form a shape than that of
cold forging, which is usually done at room temperature. |
| PROCESSES |
FORM GRINDING |
Grinding of tool designed for machining and otheroperations, in such a way that they are provided with the precise formrequired for their work, or regrinding them to restore the form after ithas been lost as a result of service |
| PROCESSES |
FORMING |
Production of shaped part either by means of feeding in a toolground to shape or form of the part or by what is known as spinning. |
| PROCESSES |
FOUNDRY |
Place where metal is melted and poured into required shapes. |
| PROCESSES |
FULL AUTOMATIC |
Process in which all phases, once started, areaccomplished without the need of further manual input. |
| PROCESSES |
FULLERING |
Similar to drawing and is a preliminary forging operation which results in an elongated section between two heavier sections. |
| PROCESSES |
FUSION |
Merging of two materials while in a molten state. |
| PROCESSES |
FUSION SAWING |
Sawing material in the cold state by means of frictiondiscs, where a quick and rough cut is sufficient for the purpose. |
| PROCESSES |
FUSION WELDING |
Welding process in which the metals are brought tothe temperature at which they melt, and are joined without hammering. |
| PROCESSES |
GALVANIZING |
The application of a layer of zinc to the surface of ironand steel for protection from corrosion. |
| PROCESSES |
GAS WELDING |
Method of fusion welding in which a flame producedby the combustion of gases is employed to melt the metal. |
| PROCESSES |
GEAR CUTTING |
Production of gear wheels by the various forms of shaping tools or rotary cutters. |
| PROCESSES |
GEAR HOBBING |
Method of generating gear teeth by the use of a rotating worm shaped cutter. |
| PROCESSES |
GEAR PLANING |
Production of gear wheels by the use of cutters havinga sliding instead of a rotary action. |
| PROCESSES |
GENERATING GEAR TEETH |
Production of correctly formed gearteeth automatically, without the use of cutter of intricate shape. |
| PROCESSES |
GRAVITY DIE CASTING |
Production of casting by pouring moltenmetal into metallic moulds under the force of gravity only. |
| PROCESSES |
GRINDING |
Finishing operation designed to give to parts already machinedthe necessary precision of form and accuracy of dimensions by theremoval of excess material due to the cutting action of grains of abrasivein a wheel or disc. |
| PROCESSES |
HAMMER WELDING |
Uniting by heating two pieces of mild steel or wrought iron to a soft malleable condition and hammering themtogether on an anvil. |
| PROCESSES |
HEADING |
A metal gathering or upsetting operation. Originally used forproduction of screw and rivet heads in cold working process. |
| PROCESSES |
HONING |
Process whereby a mirror finish is given to important bearingsurfaces by using hones or abrasive tools that normally employ bothrotary and longitudinal motion. |
| PROCESSES |
HOOKER PROCESS |
t is usually a cold extrusion process and is commonly employed for the production of small, thin walled copper andaluminium seamless tubes and small cartridge cases. |
| PROCESSES |
HOT PRESSING |
Forming or forging tough metals such as alloy steel athigh temperatures. |
| PROCESSES |
HOT PRESSURE WELDING |
In this, bonding of two materials is broughtabout by application of high pressure and production of mutualdeformation at temperatures below the melting range of either. Bondingresults from interlocking of the atoms of each piece with someadditional
interlocking introduced by diffusion. |
| PROCESSES |
HOT ROLLING |
A process of forming metals between rolls in which themetals are heated to temperatures above the transformation range. |
| PROCESSES |
HYDROJET |
A manufacturing process in which a material is cut by a highpressure jet of water often containing an abrasive material to enhancecutting action. |
| PROCESSES |
IMPACT EXTRUSION |
In this process, a slug of metal is placed on asolid bottom die, and the impact of the punch causes the metal toflow back over the punch, which has a uniform section, slightly relieved. |
| PROCESSES |
INDEXING |
Rotation of a workpiece by small uniform amounts, with or without the aid of change wheels, mainly in connection with millingoperation. |
| PROCESSES |
INTERNAL GRINDING |
Mechanical grinding of the internal bores of gears, bushes and wide variety of machine parts and articles of specialized character. |
| PROCESSES |
JOGGLING |
Bending operation necessary for making a lap joint, yet keepingthe top surface flush. |
| PROCESSES |
KNURLING |
A cold working process in which a series of sharp serrationson a hardened steel roller are pressed into the material being knurled. |
| PROCESSES |
LANCING |
A special form of piercing in which the entire contour is notcut, the blanked material remaining as a tab. |
| PROCESSES |
LAPPING |
Finishing process following grinding, and designed to producean exceptionally high degree of surface finish as well as a perfectly truesurface accurate to size within extremely close limits, by using very fine abrasives. |
| PROCESSES |
LIMITS OF ACCURACY |
Under a limit system, the workman aims atproducing a component, the acceptable size of which may fall betweentwo limits of size. |
| PROCESSES |
MAAG PROCESS |
The process combines precision grinding of the flanksof the gear teeth with a generating action which ensures that a correctinvolute form will be maintained, or restored if distortion has takenplace as a result of hardening and heat treatment. |
| PROCESSES |
MACHINING |
Machining is the art of using machine tools and cuttingtools in combination to reduce a piece of material to some specifiedshape and dimensions. |
| PROCESSES |
METALLIZING |
Process of spraying metal on to a metallic or non-metallicsurface, for building up of worn parts and for the protection of components against corrosion. |
| PROCESSES |
MILLING |
Operation in which a workpiece is given a specific shape orform by means of a rotating cutter having many cutting teeth. |
| PROCESSES |
MILL WRIGHTING |
General maintenance, repair and the making of parts for machinery in a factory. A millwright is a craftsman in thetrue sense of the word. |
| PROCESSES |
MOULDING |
Practise of making moulds in which to pour molten metalto form castings. |
| PROCESSES |
NOTCHING |
Operation of cutting gaps on the edge of an article |
| PROCESSES |
OPEN DIE FORGING or SMITH FORGING |
A forging process in which a drop hammer delivers blows of great force to a heated metalthat is shaped by manipulating it under the hammer. |
| PROCESSES |
OXY ACETYLENE CUTTING |
A method of cutting heavy iron or steelplates with the aid of an oxyacetylene torch. |
| PROCESSES |
PEENING |
Work hardening the surface of metal by hammering or blasting with shot (small steel balls). Peening introduces compressive stresseson weld surfaces that tend to counteract unwanted tensile stresses. |
| PROCESSES |
PERFORATING |
Piercing many small holes close together. |
| PROCESSES |
PICKLING |
Process of cleaning (that is removing oxide film from) castingsby dipping them into an acid bath prior to plating, painting or furthercold working. |
| PROCESSES |
PIERCING |
Producing holes in a blank by driving a punching tool intothe mass of the metal, while at the same time forcing the displacedmaterial into the particular form required by the part, this is known asdeep piercing. |
| PROCESSES |
PINNING |
Scratching of the work surface during a filing operation causedby small particles of metal getting wedged in front of the teeth of thefile. |
| PROCESSES |
PLANING |
Producing flat or plane surface on a moving or other part by removing metal from them by means of a cutting tool used in a planingmachine. |
| PROCESSES |
PLANISHING |
Hammering operation by which the surface of a metalcomponent is brought to a first class condition for such operations aspolishing, plating and spraying. |
| PROCESSES |
PLATE MOULDING |
Specialized form of moulding which consists of one or more patterns mounted on a plate with the runner and ingatesbeing allowed for in the pattern. |
| PROCESSES |
PLATE EDGE PLANING |
Smoothing and generally making true andaccurate the edges of large plates. |
| PROCESSES |
PLATING |
The process of depositing a layer of one metal on another,often done electrically, for the purpose of corrosion protection,appearance, improved electrical conductivity, and other engineeringrequirements. |
| PROCESSES |
POWDER METALLURGY |
Forming parts out of powdered metal by compacting the powder into a mould under great pressure and heating it. |
| PROCESSES |
PRESSING (hot) |
Process of shaping a metal article by pressure and whilethe metal is hot, and without any interstage forging. |
| PROCESSES |
PRESSURE WELDING |
Method of uniting two sheets of metal by squeezing them between heated dies. |
| PROCESSES |
PROFILING |
Method of milling irregular forms by reproducing the formof a master template, form or pattern. |
| PROCESSES |
PULTRUSION |
A process that is opposite to extrusion and is used incomposite part manufacturing. |
| PROCESSES |
PUNCHING |
The operation of cutting a hole in sheet metal using a die. Thehole material is scrapped. It is a shearing operation carried out in a press. |
| PROCESSES |
PUSH FIT |
Class of fit which allows two parts to be assembled underhand pressure. |
| PROCESSES |
REFINING OF METAL |
Process of removal of impurities from metalsor alloys, resulting in improved properties or a different product. Also refers to the refining of the grain of a coarse grained metal oralloy. |
| PROCESSES |
REFLEX PROCESS |
Photo printing process enabling copies to be madefrom opaque originals. |
| PROCESSES |
RESISTANCE WELDING |
Uniting two pieces of metal by the passage of a heavy electrical current (high amperage current) while the surfacesare pressed together. |
| PROCESSES |
RIVETING |
A hammering operation in which the end of a metal pin (i.e.,a rod or rivet) is pressed over or spread out. It may be either a hot orcold working process. |
| PROCESSES |
ROLL FORMING |
Process of passing strip stock between driven rollersthat form the strip to the shape desired. |
| PROCESSES |
ROLL GRINDING |
The operation of grinding large rolls of steel mills orcalendars. |
| PROCESSES |
ROLL THREADING |
A method of threading a part by pressing and rollingbetween serrated dies. |
| PROCESSES |
RUBBER METAL BONDING |
Bonding of natural rubber or syntheticrubber to metal surfaces. |
| PROCESSES |
RUNNING FIT |
Term used of parts which are assembled so that they arefree to rotate a type of clearance fit. |
| PROCESSES |
SAND BLASTING |
Process used for cleaning metal surfaces, consists of directing a stream of air under pressure, into which quartz sand isintroduced as an abrasive, on to the work |
| PROCESSES |
SCREW CUTTING |
Process of cutting a screw thread, usually in a lathe, which involves copying a master screw called the leading or lead screw in the nature of its pitch, but not its profile. |
| PROCESSES |
SEAMING |
A bending and flattening of an interlocking fold,e.g., a stovepipe seam. |
| PROCESSES |
SEAM WELDING |
Process of closing a seam by a continuous resistance weld. |
| PROCESSES |
SEASONING |
Process by which the internal stresses existing in a piece of material (which have been subjected to sudden changes of temperature,as in casting or hardening or have been acted upon by heavy forces insome machining operations) are removed. |
| PROCESSES |
SEMI AUTOMATIC |
A process in manufacturing that requires some degreeof manual input, but acts without this input for at least part of thecycle. |
| PROCESSES |
SERRATING |
Method of forming by the use of a knurling tool a series of straight serrations on the outer surface of a part, and parallel with italong the axis of a part. |
| PROCESSES |
SHAPING |
Operations performed on shaping machines. |
| PROCESSES |
SHAVING |
A finishing operation that cuts a small amount of material fromthe edge of a stamping to gain finish, accuracy and / or a square edge. |
| PROCESSES |
SHEARING |
Cutting in a line by two opposed blades somewhat in a mannerof the ordinary household shears. |
| PROCESSES |
SHELL MOULDING |
A form of gravity casting process metal (usually ahigh melting temperature metal) in which the mould is made of athin shell of refractory material. |
| PROCESSES |
SHIELDED ARC WELDING |
Process in which the molten weld metal isprotected from deterioration by an envelope of chemically reducingor inert gas such as helium or argon. |
| PROCESSES |
SHRINKAGE FIT |
Method of fitting a shaft or other part into an undersizedhole by heating the outer member until has expanded sufficiently. |
| PROCESSES |
SHOT PEENING |
A cold working process in which the surface of a finishedpart is pelted with finely ground steel shots or glass beads to form acompression layer. |
| PROCESSES |
SILVER BRAZING |
Brazing similar or dissimilar materials by using analloy of silver or other metals. |
| PROCESSES |
SINTERING |
The process of fusing compacted material such as metalpowders into a solid or porous piece by applying heat sufficient tobond, but not melt, the particles. |
| PROCESSES |
SLOTTING |
Machine tool operation designed for finishing slots or otherenclosed parts not capable of being machined by normal planing orshaping machine. |
| PROCESSES |
SLUSH DIE CASTING |
Casting process which involves the filling of ametallic mould with liquid metal or alloy, then inverting the mouldand pouring out the unfrozen metal from the center. |
| PROCESSES |
SMELTING |
The process of heating ores to a high temperature in thepresence of a reducing agent such as carbon (coke) and of a fluxingagent to remove the gangue. |
| PROCESSES |
SOLDERING |
Operation of joining two or more parts together by moltenmetal. |
| PROCESSES |
SPINNING |
Cold drawing ductile sheet metal blanks into cylinders andother shapes having rotational symmetry in a spinning lathe. |
| PROCESSES |
SPOT WELDING |
Method of uniting sheet material by a series of localized welds, produced by overlapping the edges of two sheets of metal andfusing them together between copper electrode tips at suitably spacedintervals, by means of a heavy electrical current.
It is a form of resistance welding. |
| PROCESSES |
STAMPING |
Process of shaping metal under a falling weight. |
| PROCESSES |
STUD WELDING |
Method of attachment of studs, screws, pins and similarparts to plates and components by projection welding or arc welding. |
| PROCESSES |
SUNDERLAND PROCESS |
Method of generating gears by the use of arack shaped cutter. |
| PROCESSES |
SURFACE GRINDING |
Method of grinding designed to carryout theremoval of metal from the surface of a part or parts less expensively,and with greater precision than could be achieved by machining processes with cutting tools of steel or by hand or machine filing. |
| PROCESSES |
SURFACING |
Movement of a lathe tool at right angles to the bed, to work on the face or end surface of the work. |
| PROCESSES |
SWAGING |
Compacting or necking down metal bars or tubes by hammering or rotary forming. |
| PROCESSES |
SWEDGING |
A cold die forging operation in which the metal is confinedand made to flow plastically into the punch and/or die impressions. |
| PROCESSES |
TAPER FIT |
Type of fit in which a taper on the mating surfaces is combined with an interference fit between the parts when assembled. |
| PROCESSES |
TAPER TURNING |
Method of turning a taper on a work in the lathe. |
| PROCESSES |
TAP GRINDING |
Sharpening of a tapping tool by grinding a taper on theend and a clearance behind the cutting edge along this taper. |
| PROCESSES |
TAPPING |
Operation of producing an internal thread by means of a tap. |
| PROCESSES |
TEMPER ROLLING |
Process used in the production of tin -plate, in which the annealed coils or strips are subjected to a small amount of cold reduction in a four high mill in order to increase the stiffness of the dead soft material without unduly reducing its
ductility. |
| PROCESSES |
THERMIT WELDING |
Method of uniting iron or steel parts by surrounding the joint with thermit mixture at a sufficiently hightemperature to fuse the adjacent surfaces of the parts together. |
| PROCESSES |
THREAD GRINDING |
Grinding of screw threads so as to remedy suchmain variations in form or size as may have occurred as a result of thehardening treatment of a part or tool. |
| PROCESSES |
THREAD MILLING |
Operation of producing threads, both external andinternal, by means of thread milling cutters, either single or multi-ribbed,according to the type of thread required and the design of the threadmilling machine employed. |
| PROCESSES |
THREAD ROLLING |
Method of producing threads on screws, bolts,screw caps etc. by rolling under pressure so as to make contact with therollers, to which the required pitch and form of screw threads havepreviously been given. |
| PROCESSES |
TONGUE SHAPING |
Forming a narrow projection (called a tongue)from solid metal on a shaping machine. |
| PROCESSES |
TREPANNING |
Removal of a circular piece of material from inside a steelbar, plate or billet. |
| PROCESSES |
TRIMMING |
Cutting away excess material left from previous operations. |
| PROCESSES |
TUMBLING |
Process of cleaning, polishing, or crushing in which thearticles to be treated are mixed with balls, pieces of hard material orabrasive and rotated in a more or less horizontal container. |
| PROCESSES |
TURNING |
Process of reducing the diameter of materials held in a latheand the general name given to the process whereby material which isturned by means of a driven spindle to which it is attached, is broughtinto contact with a stationary tool having cutting
edges. |
| PROCESSES |
UPSETTING |
Process of increasing the cross-sectional dimensions whenforging, with consequent reduction in length. May be done manually or by machine. |
| PROCESSES |
UPSET FORGING |
The process of increasing the cross-section of stock atthe expense of its length. |
| PROCESSES |
VULCANIZATION |
The process of treating crude or synthetic rubber orsimilar plastic material chemically to give it useful properties, such aselasticity, strength and stability. |
| PROCESSES |
WELDING |
Joining of metals by the application of heat, without the useof solder or any other metal or alloy having a lower melting pointthan the metals being joined. |
| PROCESSES |
WHEEL TRUING |
Cutting off irregularities on a rotating grinding wheel with a diamond dresser. |
| PROCESSES |
WORM GRINDING |
Grinding the threads of worm gear wheels as ameans of finishing them after the hardening operation. |
| PROCESSES |
WIRE DRAWING |
Reduction in diameter of metal rods by drawing themthrough conical openings in the blocks. |
| MACHINES AND DEVICES |
ACCELERATING PUMP |
A small cylinder and piston fitted to sometypes of SI engine carburettor, and connected to the throttle so as toprovide a momentarily enriched mixture when the engine is accelerated. |
| MACHINES AND DEVICES |
ACCUMULATOR |
A device used for storing liquid under pressure(sometimes used to smooth out pressure surges in a hydraulic system). |
| MACHINES AND DEVICES |
ACTUATOR |
A device which uses fluid power to produce mechanicalforce and motion. |
| MACHINES AND DEVICES |
AFTER COOLER |
A device used on the turbocharged engines to cool theair which has undergone compression. |
| MACHINES AND DEVICES |
AIR COMPRESSOR |
A device used to increase air pressure. |
| MACHINES AND DEVICES |
AIR COOLED ENGINE |
An engine that is cooled by the passage of airaround the cylinders, not by passage of a liquid through water jackets. |
| MACHINES AND DEVICES |
AIR CONDITIONER |
A device used to control the temperature, humidity,cleanliness and movement of air inside a room or a car. |
| MACHINES AND DEVICES |
AIR HAMMER |
Power hammer, used for roughening out heavy forgingsin foundry work. |
| MACHINES AND DEVICES |
ALTERNATOR |
A electrical generator that produces alternating current(flow of current is considered to change in direction with each half cycle). |
| MACHINES AND DEVICES |
ARBOR PRESS |
A hand operated machine capable of applying high pressurefor the purpose of pressing parts together or removing parts. |
| MACHINES AND DEVICES |
AUTOMATIC LATHE |
Specialized development from capstan and turretlathes, with a full automatic cycle of turning, boring and drilling of the workpiece, the function of the operator consists of loading or takingfinished work from the machine. |
| MACHINES AND DEVICES |
AUTOMATIC SCREW MACHINE |
Fully automatic single spindle ormultiple spindle bar stock turret lathe. |
| MACHINES AND DEVICES |
AUTOMATIC WELDING MACHINE |
Machine designed to carryouthigh speed electric arc or resistance welding in mass production processes,combining rapid production with accurate control of temperature. |
| MACHINES AND DEVICES |
BABCOCK AND WILCOX MILL |
Dry grinding mill using rotary steelballs. |
| MACHINES AND DEVICES |
BALANCE BOX |
A box, filled with heavy material used to counter balancethe weight of the job and load of a crane of the cantilever type. |
| MACHINES AND DEVICES |
BALANCE CRANE |
A crane with two arms, one having counterpoisearrangements to balance the load taken by the other. |
| MACHINES AND DEVICES |
BALANCING MACHINE |
A machine for testing the extent to which arevolving part is out of balance, and to determine the weight andposition of the masses to be added or removed, to obtain balance. |
| MACHINES AND DEVICES |
BAND SAW |
A narrow endless strip of saw blading running over and drivenby pulleys, as a belt used for cutting wood or metal to intricate shapes. |
| MACHINES AND DEVICES |
BAR LATHE |
A small lathe of which the bed consists of a single bar of circular, triangular or rectangular section. |
| MACHINES AND DEVICES |
BATTERY |
An electrochemical device for storing energy in chemical formso that it can be released as electricity. It is a group of electric cellsconnected together. |
| MACHINES AND DEVICES |
BED PLATE |
A cast iron or fabricated steel base, to which the frame of anengine or other machine is attached. |
| MACHINES AND DEVICES |
BENCH LATHE |
A lathe of small dimensions that can be mounted on abench or stand. |
| MACHINES AND DEVICES |
BENDING MACHINE |
Machine designed to bend and fold sheet metal. |
| MACHINES AND DEVICES |
BLOWER |
A low pressure air pump, usually of one rotary or centrifugal type. |
| MACHINES AND DEVICES |
BOARD DROP STAMP |
A stamping machine in which the frictionalgrip of opposed rollers on either side of a vertical board lifts a tup, which falls when the roller pressure is released. |
| MACHINES AND DEVICES |
BOLT MAKING MACHINE |
A machine which forges bolt by forming ahead on a round bar. |
| MACHINES AND DEVICES |
BOOST FAN |
A fan for restoring the pressure drop of air or gas, used forrestoring the pressure drop in transmission pipes, and for supplyingair to furnaces. |
| MACHINES AND DEVICES |
BORING AND TURNING MILL (vertical) |
Machine designed for boringand turning castings and forgings. |
| MACHINES AND DEVICES |
BORING MACHINE (horizontal) |
Machine used for boring, the spindlebeing horizontal. In one type, the spindle only rotates and in anothertype the spindle rotates and also has a horizontal movement. |
| MACHINES AND DEVICES |
BORING MACHINE (vertical) |
Machine used for boring, the spindle beingvertical, very similar to a radial driller. Also called BORING MILL. |
| MACHINES AND DEVICES |
BRASS FINISHERS LATHE |
Lathe specially designed with attachmentsto machine brass work in quantities. The chief feature is the provisionof special hand operated rests. |
| MACHINES AND DEVICES |
BREAK LATHE |
Heavy lathe with sliding bed to accommodate large work.The machine comprises a fast and a loose head stock, and a base plateupon which the bed is mounted. |
| MACHINES AND DEVICES |
BROACHING MACHINE |
Machine designed to drive a tappered tool of special form, known as a broach, through a hole or over a piece of work, which bring the hole or the surface to the desired finished size. |
| MACHINES AND DEVICES |
CAPSTAN LATHE |
Lathe designed to use a number of cutting toolsmounted on a rotating turret or capstan, and arranged to performturning operations successively. |
| MACHINES AND DEVICES |
CENTRE LATHE |
Machine for carrying out turning, boring, screw cuttingoperations on a work held between centers or in a chuck, but not forrepetition work. |
| MACHINES AND DEVICES |
CENTRIFUGAL GOVERNOR |
A governor which uses fly weight forceto sense speed in order to control the fuel supplied to the combustionchambers. |
| MACHINES AND DEVICES |
CENTRIFUGAL PUMP |
A pump using the centrifugal force producedby a rapidly rotating impeller to displace liquid. |
| MACHINES AND DEVICES |
CENTRIFUGE |
A device with a rapidly rotating bowl which separates theimpurities of a fluid by intense centrifugal force. |
| MACHINES AND DEVICES |
CIRCUIT BREAKER (lighting system) |
A device that opens the circuit when the current draw becomes excessive and closes when the currentflow is reduced. |
| MACHINES AND DEVICES |
CIRCULATING PUMP |
The term applied to cooling water/ lubricatingoil pumps which effect circulation of fluid. |
| MACHINES AND DEVICES |
COMPRESSOR |
A mechanical device to pump air, and thereby increasethe pressure. |
| MACHINES AND DEVICES |
CONDENSER (electrical) |
An arrangement of insulated conductors anddielectrics for the accumulation of an electric charge. |
| MACHINES AND DEVICES |
CUPOLA |
Special type of blast furnace, chiefly used for the melting of castiron. |
| MACHINES AND DEVICES |
CYLINDRICAL GRINDER |
Grinding machine designed to true up andbring to size cylindrical parts such as shafts, spindles, rollers etc. |
| MACHINES AND DEVICES |
DIESEL ENGINE |
An internal combustion engine having fuel injectedinto the combustion chamber near the end of the compression stroke.The fuel is ignited by the heat of compression only. |
| MACHINES AND DEVICES |
DIODE |
A device that allows current to pass but only in one direction. |
| MACHINES AND DEVICES |
DISC GRINDER |
Grinding machine embodying one or more abrasivediscs mounted horizontally on a vertical spindle, the work reposingon the surface of a flat rotating carrier or table. |
| MACHINES AND DEVICES |
DRAWCUT SHAPER |
ype of machine with a traverse tool movement.In this, the work is fixed to the table which reciprocates under thetool, the tool moving across the table for the purpose of obtainingthe feed. |
| MACHINES AND DEVICES |
DRILL GRINDER |
Machine employed for the accurate grinding of thecutting points and lips of twist drills. |
| MACHINES AND DEVICES |
DRILL PRESS |
A fixed machine to drive a tool in rotary motion. |
| MACHINES AND DEVICES |
DRILLING MACHINE |
Machine tool used for the production of holes with a drill, fall under two classes—bench drilling machine and thepillar drilling or upright drilling machine. |
| MACHINES AND DEVICES |
DROP STAMP |
Machine for producing drop stampings and forgings,may be free falling type or controlled falling type. |
| MACHINES AND DEVICES |
DRY CELL (dry battery) |
A battery that uses no liquid electrolyte. |
| MACHINES AND DEVICES |
DUPLEX MILLER |
Manufacturing type milling machine sometimes calleda duplex head miller, has two head stocks supporting two opposedspindles. This enables two face mills or two horizontal cutters, to work simultaneously on opposite sides of the workpiece. |
| MACHINES AND DEVICES |
DYNAMOMETER |
A device for absorbing the power output of an engineand measuring torque or horse power, so that it can be computed intobrake horsepower. |
| MACHINES AND DEVICES |
ELECTRIC DRILL |
Hand operated, portable drilling machine driven by electric power. |
| MACHINES AND DEVICES |
ENGINE |
A machine that converts heat energy into mechanical energy.The assembly that burns fuel to produce power is sometimes calledPOWER PLANT. |
| MACHINES AND DEVICES |
FIXED DISPLACEMENT PUMP |
A type of pump in which the volumeof fluid handled per cycle cannot be varied. |
| MACHINES AND DEVICES |
FINE BORING MACHINE |
Machine used for boring to very close limits,the holes in pistons, the bores in cylinder blocks, the bearings in motorcar and aero engine connecting rods, valves as fitted to steam andother piping, may have a horizontal or vertical spindle |
| MACHINES AND DEVICES |
FLY BALL GOVERNOR |
Conventional type of centrifugal governor,commonly called a mechanical governor. |
| MACHINES AND DEVICES |
FORGING MACHINE |
Machine designed to shape a metal article while thematerial is in the hot plastic state by applying the necessary force or pressure. |
| MACHINES AND DEVICES |
GANG DRILLING MACHINE |
A drill press in which two or more drillingspindles are mounted on a single table. This permits several drillingoperations to be made by moving the workpiece from spindle to spindlein a planned sequence. |
| MACHINES AND DEVICES |
GAUGE SNUBBER |
A device installed in the fuel line connected to thepressure gauge, used to dampen pressure surges and thus provide asteady reading. This helps protect the gauge. |
| MACHINES AND DEVICES |
GEAR TYPE PUMP |
A pump which uses the space between the adjacentteeth of gears for moving the liquid. |
| MACHINES AND DEVICES |
GENERATOR |
An electromagnetic device used to generate electricity. |
| MACHINES AND DEVICES |
GOVERNOR |
A device for controlling the speed of a prime mover, thatproduces power. |
| MACHINES AND DEVICES |
GRINDING MACHINE |
Machine designed for one or other or acombination of the following functions. Grinding excess material off parts previously machined by other methods; forming parts from blanks;parting off lengths of material from rods, bars, billets and so on. |
| MACHINES AND DEVICES |
HEAT EXCHANGER |
A device used to cool a fluid by transferring heat. |
| MACHINES AND DEVICES |
HOIST |
Appliance or machine for lifting heavy material, also called liftingtackle. |
| MACHINES AND DEVICES |
HYDRAULIC GOVERNOR |
A governor using fluid to operate the fuelcontrol. |
| MACHINES AND DEVICES |
INTERCOOLER |
Heat exchanger for cooling the air between the stages of compression. |
| MACHINES AND DEVICES |
INTERNAL COMBUSTION ENGINE |
An engine that burns fuel withinthe cylinder itself as a means of developing power. |
| MACHINES AND DEVICES |
INTERNAL GRINDER |
Machine used to finish internal surfaces such asengine cylinders, ball bearing races, and similar work that requiresexcellent accuracy and high finish. |
| MACHINES AND DEVICES |
JIG BORING MACHINE |
An extremely accurate machine tool having aprecession spindle and a table to hold the work. The table and spindleare movable with built in measuring devices. Used for spacing andproducing precision holes in tools, dies, and small lot production
whereextreme accuracy is required. |
| MACHINES AND DEVICES |
KNUCKLE PRESS |
Press designed to exert a great pressure. It is a strong,heavily built and a rather slow-moving machine, and the standard rangevaries from 60-100 tons per sq.inch. |
| MACHINES AND DEVICES |
LEVER |
A simple machine for obtaining mechanical advantage. The leverconsists of a rigid arm or bar pivoted or bearing on a point called thefulcrum and has a weight arm and a power arm. |
| MACHINES AND DEVICES |
LINCOLN MILLER |
One of the manufacturing type milling machines,all of which are characterized by the fixed table height with verticaladjustment of the spindle, in contrast with the column and knee typein which the work table is vertically adjustable. |
| MACHINES AND DEVICES |
LINISHING MACHINE |
Automatic mirror polishing machine capable of polishing one or more parts at a time on the same polishing band ordisc. |
| MACHINES AND DEVICES |
LIQUID COOLED ENGINE |
An engine that is cooled by the circulationof liquid coolant around the cylinders. |
| MACHINES AND DEVICES |
LUMSDEN GRINDER |
Oscillating type of grinding machine. The toolto be ground is secured in a chuck having a range of adjustments suchthat any desired angle can be ground. |
| MACHINES AND DEVICES |
MACHINE |
A mechanical device, mechanism, or apparatus which transmitspower and motion to perform work. |
| MACHINES AND DEVICES |
MACHINE TOOL |
Type of power driven machine for cutting metal asemployed in machine shops, the term being usually restricted to those which use the tool that produces waste material in the form of chips orcuttings. Typical machine tools are lathes, planers,
shapers, slotters,borers, drills, broaches, millers and saws. |
| MACHINES AND DEVICES |
MANDREL PRESS |
Press for the purpose of fitting mandrels to the boreof the work. |
| MACHINES AND DEVICES |
MICHIGAN GEAR SHAPER |
Machine incorporating a number of shapedcutters, used to produce all the teeth on spur or helical gearssimultaneously. |
| MACHINES AND DEVICES |
MILLING MACHINE |
Machine tool designed to remove metal from thesurface so as to size and shape it by means of a revolving multipletoothed cutter called milling cutter. |
| MACHINES AND DEVICES |
MOTOR |
A rotating electromagnetic device used to convert electrical energy into mechanical energy. |
| MACHINES AND DEVICES |
MOTOR VEHICLE |
Any type of self propelled vehicle mounted on wheelsor tracks. |
| MACHINES AND DEVICES |
MOULDING MACHINE |
Mechanical device for making moulds at amuch faster rate. |
| MACHINES AND DEVICES |
MULTIPLE SPINDLE DRILLING MACHINE |
Machine used for drillinga large number of holes in one operation, built purely for repetition work. |
| MACHINES AND DEVICES |
MULTIPLE SPINDLE LATHE |
Machine, generally of the automatic type, with up to six spindles mounted in a drum, this indexes in sequence, sothat a different operation is performed at each station, and one revolutionof the drum completes a piece of work. |
| MACHINES AND DEVICES |
NIBBLER |
Machine designed to cut metals in sheet form to any requiredshape. The machine comprises a small punch moving up and down at highspeed, and so taking a considerable number of small nibbles or cuts. |
| MACHINES AND DEVICES |
NUT TAPPING MACHINE |
Device for tapping, that is providing thescrew threads on nuts. |
| MACHINES AND DEVICES |
OIL COOLER |
A heat exchanger for lowering the temperature of oil. |
| MACHINES AND DEVICES |
OIL PUMP |
Mechanical device to pump oil (under pressure) into thevarious oil galleries. |
| MACHINES AND DEVICES |
OPTICAL COMPARATOR |
A machine that enlarges the profile view of a part and compares it to a standard profile. |
| MACHINES AND DEVICES |
OSCILLOSCOPE |
A device for recording wave forms on a fluorescentscreen, proportional to the input voltage. |
| MACHINES AND DEVICES |
OVER RUNNING CLUTCH |
A clutch mechanism that transmits powerin one direction only. |
| MACHINES AND DEVICES |
OVER SPEED GOVERNOR |
A governor that shuts off the fuel or stopsthe engine, only when excessive speed is reached. |
| MACHINES AND DEVICES |
PLAIN MILLER |
Milling machine in which milling can be carried out ina direction parallel with the axis of the arbor or at right angles to it ,but no swivelling of the worktable is possible. |
| MACHINES AND DEVICES |
PLANING MACHINE |
Machine for removing material from planesurfaces by means of cutting tools fixed in the machine. It comprisesa bed, a travelling worktable on which the parts to be planed are carried,standards, a cross slide, tool box and gearing. Also called
PLANER. |
| MACHINES AND DEVICES |
PLANOMILLER |
Milling machine, sometimes called a slab miller, similarin shape and appearance to a planing machine, but having cutter handsinstead of clapper type tool boxes. |
| MACHINES AND DEVICES |
PLUNGER PUMP |
A pump which operates and displaces fluid by meansof a plunger. |
| MACHINES AND DEVICES |
PNEUMATIC TOOL |
Design of hand tool operated by air pressure e.g.,pneumatic drill, pneumatic hammer or riveter. |
| MACHINES AND DEVICES |
POWER HAMMER |
Machine for shaping metal while hot, grouped intothree classes, according to the power supplied: compressed air, steam orhydraulic pressure. |
| MACHINES AND DEVICES |
POWER PLANT |
The engine or power producing mechanism. |
| MACHINES AND DEVICES |
PRESS |
Machine designed to manipulate sheet and strip metal so as toproduce a given shape or form. |
| MACHINES AND DEVICES |
PROFILING MACHINE |
Form of milling machine designed to producedelicate parts whose form or contour is irregular, particularly for massproduction by the use of jigs and so on, of small machine and otherparts, or where the production of interchangeable parts is desired. |
| MACHINES AND DEVICES |
PRONY BRAKE |
A friction brake used for engine testing. |
| MACHINES AND DEVICES |
PUMP |
Mechanical device in which a fluid, gas or liquid, is lifted or forcedagainst an external pressure, main types are reciprocating or pistonpumps, centrifugal pumps and rotary displacement pumps. |
| MACHINES AND DEVICES |
PUNCHING MACHINE |
Machine designed to cut metal blanks fromthe sheet. It may be of the crank or eccentric variety; the frame of theC or double sided type. Also called PUNCH PRESS. |
| MACHINES AND DEVICES |
RADIAL DRILLING MACHINE |
Machine with the drill head workingon an arm which has a rotary movement in the horizontal plane. In thisthe drill spindle could be moved to the positions required instead of moving the work for each hole to be drilled. |
| MACHINES AND DEVICES |
RADIATOR |
A heat exchanger in which cooling water gives up heat withoutcoming into direct contact with air. |
| MACHINES AND DEVICES |
RAM (pump) |
Hydraulic ram, also termed a water ram, by which water israised by its own momentum from a lower to a higher level. |
| MACHINES AND DEVICES |
RECTIFIER |
A device, made of a diode or series of diodes, used in a weldingmachine, for converting alternating current to direct current. |
| MACHINES AND DEVICES |
RELAY |
An electromagnetic switch which utilizes variation in the strengthof an electric circuit to effect the operation of another circuit. |
| MACHINES AND DEVICES |
RELIEF VALVE |
An automatic valve which is held shut by a spring of correct strength. Excessive pressure opens the valve and releases someof the gas or liquid. |
| MACHINES AND DEVICES |
RELIEVING LATHE |
Machine for backing off the teeth of milling cuttersto facilitate machining of metals. |
| MACHINES AND DEVICES |
REVERBERATORY FURNACE |
Furnace in which ore or metal is meltedby contact with the flame, but is not in contact with the fuel. |
| MACHINES AND DEVICES |
RHEOSTAT |
A device to regulate current flow by varying the resistance inthe circuit. |
| MACHINES AND DEVICES |
RIGBY HAMMER |
Steam hammer used for a wide range of forging work. |
| MACHINES AND DEVICES |
RIVETING MACHINE |
Power operated machine used to form rivet heads.May be classified according to the method of operation hydraulic,pneumatic, or steam and the manner in which the rivet head is formed. |
| MACHINES AND DEVICES |
ROLLING MILL |
Mill in which ingots, bars, blooms, billets etc., of steelor other metals, are rolled to reduce or alter their sections. |
| MACHINES AND DEVICES |
ROLL TURNERS LATHE |
Special design of lathe adapted for machiningrolls employed for printing machines, calenders or rolling mills. |
| MACHINES AND DEVICES |
ROOTS BLOWER |
An air pump or blower similar in principle to a geartype pump. |
| MACHINES AND DEVICES |
ROTARY BLOWER |
Pump or compressor used to supply air or gas to afurnace, forge, internal combustion engine or similar application. Thismay be a vane, geared rotor, centrifugal or turbine type depending onthe particular application and the volume of air or gas
or the pressurerequired. |
| MACHINES AND DEVICES |
ROTARY PUMP |
Pump used for liquid or gas, in which a rotating impelleris used, may be vane type, gear type centrifugal and turbine type. |
| MACHINES AND DEVICES |
SALT BATH FURNACE |
Liquid bath furnace used for case hardening andheat treating of metals and alloys. |
| MACHINES AND DEVICES |
SAWING MACHINE |
Machine tool for cutting metal by the use of ablade band, or disc provided with cutting teeth. |
| MACHINES AND DEVICES |
SCAVENGING PUMP |
A piston type of pump delivering scavenging airto an engine. |
| MACHINES AND DEVICES |
SCRAP CUTTER |
A type of double action press having a side ram whosepurpose is to cut the scrap metal into short lengths in order to facilitatehandling. |
| MACHINES AND DEVICES |
SCREW MACHINE |
A power driven automatically controlled machinetool designed to produce finished parts from bar stock. Cams controlthe movement of the cutting tools, attachments and stock feedingdevices to complete workpieces automatically at high production
rates. |
| MACHINES AND DEVICES |
SENSITIVE DRILLING MACHINE |
Type of machine in which drillsare used with a sensitive hand pressure action. |
| MACHINES AND DEVICES |
SHAPING MACHINE |
Type of machine used for the production of flator curved surfaces. In this the ram which carries the tool reciprocates while the worktable which carries the workpiece moves perpendicularto the ram movement. Also called SHAPER. |
| MACHINES AND DEVICES |
SHEARING MACHINE |
Machine designed for cutting sheet metal. Itcomprises a fixed blade and a shearing tool or blade. |
| MACHINES AND DEVICES |
SILENCER |
A device for reducing the noise of intake or exhaust in anengine. |
| MACHINES AND DEVICES |
SLOTTING MACHINE |
Machine whose mechanical principles are muchthe same as those of the shaping machine, but with the difference thatthe ram on which the slotting tool is mounted moves vertically, as ina vertical shaping machine. Also called SLOTTER. |
| MACHINES AND DEVICES |
SOLENOID |
An electrically operated magnetic device used to do work. |
| MACHINES AND DEVICES |
SPOT WELDING MACHINE |
Fixture in which sheets of metal to be welded together are clamped between two electrodes through whichan electric current is passed. |
| MACHINES AND DEVICES |
SUPERCHARGER |
An air pump driven by an engine, which fills thecylinders with air at a higher pressure than atmospheric pressure. |
| MACHINES AND DEVICES |
SURFACE GRINDER |
It is a general purpose machine tool used to finishmachine a plane surface. There are two types—horizontal and vertical. |
| MACHINES AND DEVICES |
TAPE CONTROLLED MACHINES |
Machines which have partialautomation in which the movements of a machine tool and cuttersare automatically controlled by a magnetic tape or cards which havebeen punched to indicate data previously planned for the sequence of each operation to
be performed. |
| MACHINES AND DEVICES |
TAPPING MACHINE |
Machine designed to cut threads in holes in nutsand other parts. |
| MACHINES AND DEVICES |
TESTING MACHINE |
Machine designed to apply accurately measuredloads to a test piece and, in many cases, to measure the resultingextension, compression or deflection, in order to ascertain the physicalproperties of materials. |
| MACHINES AND DEVICES |
THYRISTOR |
A type of semiconductor device that acts as a switch. It turnson when a certain voltage is applied to the gate, and it turns off whenthe current flowing between the other two terminals stops or reverses. |
| MACHINES AND DEVICES |
TOOL GRINDER |
Special machine for the grinding of turning, planingand other tools. |
| MACHINES AND DEVICES |
THREAD MILLER |
A machine that cuts threads by using a rotating millingcutter. |
| MACHINES AND DEVICES |
TROCHOID PUMP |
An oil pump consisting primarily of a pair of rotorsof special shape. |
| MACHINES AND DEVICES |
TURBO CHARGER |
An exhaust gas driven turbine directly coupled to acompressor wheel. |
| MACHINES AND DEVICES |
TURRET LATHE |
Machine generally larger than a capstan lathe, but usingsimilar tools. The main difference between them is that the turret saddlehas longitudinal movement on the guides of the bed. |
| MACHINES AND DEVICES |
UNIVERSAL GRINDER |
Type of grinding machine having a wide rangeof application and specially suited to work that has to be ground at anunusual angle. Provided with a swivel table and headstock and a wheelhead that can be rotated on its base. |
| MACHINES AND DEVICES |
UNIVERSAL MILLING MACHINE |
Design of milling machine of thecolumn and knee type, roughly similar in general design to plainmilling machine (column and knee type), but usually of less robustconstruction and having additional features that widen its field of usefulness e.g.,
a worktable that swivels in a horizontal plane so that itis not restricted to two right angled motions. |
| MACHINES AND DEVICES |
VERTICAL MILLING MACHINE |
Milling machine in which the cutterspindle rotates about a vertical axis (as on most drilling machines),but which in certain other respects has much in common with a plainmiller. |
| MACHINES AND DEVICES |
VERTICAL TURRET LATHE |
A lathe with a vertical spindle and waysthat carries the work in a chuck and has cutting tools mounted in afive position turret and side heads. |
| MACHINES AND DEVICES |
VIBRATION DAMPER |
A specially designed device mounted to the frontof an engine crank-shaft to reduce torsional vibration. |
| MACHINES AND DEVICES |
WANKEL ENGINE |
A rotary type engine in which a three lobe rotor turnseccentrically in an oval chamber and thus performs cycle of operations. |
| MACHINES AND DEVICES |
WATER BRAKE |
A device for engine testing in which the power is dissipatedby churning water. |
| MACHINES AND DEVICES |
WELDING MACHINE |
Equipment used to perform the welding(joining) operation, for example, spot welding machine, arc weldingmachine, seam welding machine etc. |
| MACHINE COMPONENTS AND ATTACHMENTS |
ANGLE PLATE |
Right angled metal plate used to secure parts duringmachining or when taking measurements. |
| MACHINE COMPONENTS AND ATTACHMENTS |
ANVIL |
Heavy block on which to hammer and shape metals. |
| MACHINE COMPONENTS AND ATTACHMENTS |
APRON |
The function of a lathe apron is to carry the mechanism for slidingand surfacing motions and screw cutting. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BACK GEARS |
Gears applied to machine tools to increase the number of speed changes obtainable with a cone or step pulley belt drive. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BASTERED THREAD |
A screw thread which does not confirm to any recognized standard dimensions. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BED |
One of the principal parts of a machine tool having accurately machined ways or bearing surfaces for supporting and aligning other movableparts of the machine. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BELLCHUCK |
Hollow cylindrical chuck bolted to the main chuck forthe purpose of giving additional support to work of awkward shape. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BELT SHIFTER |
A flat hardwood strip of suitable length having shifterfingers attached at one end and used to shift a belt from one pulley toanother or to replace a belt which has run off a pulley on an overheaddrive shaft. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BOLSTER |
Support for dies and tools in forging presses and drop stamps. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BOX ANGLE PLATE |
An angle plate made of cast iron, usually with slotscast in it and accurately machined on the outside. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BOX JIG |
A jig made in the form of a box into which the job to be drilledis inserted. |
| MACHINE COMPONENTS AND ATTACHMENTS |
BULL WHEEL |
The large gear wheel of a planer which meshes with therack under the table and drives it. The large crank gear of a shaper isoften called a bull wheel. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CAP SCREW |
A finished screw, used for fastening two pieces together by passing the screw through a clearance hole in one part and screwing itinto a tapped hole in the other. Heads may be hexagon, round, flat,fillister or socket type. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CARRIAGE |
A principal part of lathe. The carriage carries the cutting tooland moves along the ways of the lathe. It contains the saddle, compoundslide, and apron. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CARRIER |
Tool for driving work which is held between centers, as in alathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CATCH PLATE |
Plate screwed to the nose of the lathe spindle for thepurpose of driving work held between centers, through the mediumof a carrier or driving dog. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CENTRE SQUARE |
Device to enable the rapid location of the centre of the flat end of a cylindrical workpiece. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CHANGE GEARS |
An assortment of gears which are supplied with amachine for changing speed ratio between driver and driven parts of the machine. Change gears on a lathe make it possible to cut threadsof different pitches and obtain different feeds per revolution.
Onmilling machines they are used to obtain different leads when millingspirals and helices. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CHUCK |
Appliance for gripping tools, such as drills, or for holding work in a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CLAPPER BOX |
A part of the shaper tool head that holds the tool post. A clapper block is hinged into the clapper box to permit the cutting toolto swing upward on the return stroke. |
| MACHINE COMPONENTS AND ATTACHMENTS |
COLLET |
Means of gripping a bar to give quicker chucking, particularly incapstan work for rapid and accurate setting. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CLAMP |
Device for holding work during marking out, measuring,machining, fitting or grinding. |
| MACHINE COMPONENTS AND ATTACHMENTS |
COMPOUND SLIDE |
A principal part of a lathe, frequently called aCOMPOUND REST, consisting of an upper and lower part dovetailed together. The lower part or base is graduated in degrees and can beswivelled to any angle for turning short tapers and angles. The
upperslide carries the tool post and tool holder. |
| MACHINE COMPONENTS AND ATTACHMENTS |
CONE PULLEY |
A stepped pulley having two or more diameters andmade in one piece. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DEAD CENTER |
The center fitted to the tailstock of a lathe and so namedbecause it does not rotate. Also the exact or precise center of an object. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DEMAGNETIZER |
Device for removing permanent magnetism fromsteel tools and parts. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DIE HEAD |
Device to enable small or medium sized work to be screwedin capstan or turret lathes. The die head consists of a cylindrical body with a shank to enable it to be clamped in the turret. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DIE SCREW |
Tool used when threading cylindrical pieces beyond thecapacity of a die plate. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DISTANCE BLOCK |
Accurately ground steel block used to hold acomponent at a set distance from another surface, or to operate a tripmechanism tool when the tool carrier or worktable reaches the desiredposition. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DIVIDING HEAD |
Indexing or dividing head is an attachment used onthe milling machine table, for accurately dividing the circumferencesof components for grooving or fluting, gear cutting, cutting of splines,squares or hexagons. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DOG |
A tool or accessory which can be clamped on a workpiece to drive it while held between centers, as a lathe dog. Also, the name given to aprojecting part on a machine tool which strikes and moves anotherpart, such as the reversing dogs on a grinding
machine or planer. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRIFT PIN |
A round tapered steel pin used to align rivet holes so that therivet will pass through the holes easily. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL ADAPTER |
An attachment used to fit square shank drills andmorse taper sockets. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL CHUCK |
A self centering tool holding device, for driving drillsand other such cutting tools in a drilling machine. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL DRIFT |
A wedge shaped piece of steel that is used to removetapered shank tools, such as drills from spindles, sockets and sleeves. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL HOLDER |
An attachment used for holding drills in the turret of acapstan lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILLING JIG |
Device, usually of hardened steel plate, for holding a pieceof work in a definite position, provided with guide bushes through whichdrills can pass so as to locate holes in exact positions in the work. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL SLEEVE |
A steel part tapered inside and outside which fits ontothe tapered shank of a cutting tool, such as a drill or reamer, to adaptit to the size of the hole in the drill press spindle. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL VISE |
A work holding device in which the work is set and held while drilling and other operations are performed. |
| MACHINE COMPONENTS AND ATTACHMENTS |
DRILL SOCKET |
An adapter for holding taper shank drilling tools whichhave a taper shank larger than the taper hole in the drilling machine.One end is tapered outside to fit the drilling machine spindle hole while the opposite end has a larger taper hole to
receive the cuttingtool shank. |
| MACHINE COMPONENTS AND ATTACHMENTS |
EXPANDING MANDREL |
It is used to hold work on an internal diameter.It is similar in principle to a spring collet. Three jaws are arranged toexpand outward and clamp the work, as a tapered pin is forced inward. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FACE PLATE |
Flat, slotted plate screwed on the nose of the lathe spindle,or bolted to a flange, to enable work to be machined which cannot beheld in the chuck. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FEATHER |
A sliding key sometimes called a spline, used to prevent apulley, gear, or other part from turning on a shaft, but allows it tomove lengthwise. The feather is usually fastened to the sliding piece. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FEED STOP |
Method of tripping the power feed of a machine tool at apredetermined point. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FIXTURE |
Device by which a component to be machined is correctly located and held during a machining operation. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FLASK |
Complete moulding box that contains the sand that form themould. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FOLLOWER REST |
A support for long, rather small diameter work to beturned in the lathe. The rest is attached to the carriage and set close tothe cutting tool. It travels along with the cutting tool to prevent the work from springing away from the cutting tool. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FOOT STOCK |
Part of a dividing head attachment for the milling machine.It contains a center for supporting the workpiece, the same as thetailstock does for a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
FOUR JAW CHUCK |
A chuck that provides a more powerful grip on the work by means of four jaws which may be adjusted independently, sothat irregular shapes may be gripped, and the fact that the jaws can bereversed enables the work to be gripped inside as well as
from the outside. |
| MACHINE COMPONENTS AND ATTACHMENTS |
GIB |
An angular or wedge like strip of metal placed between two machineparts, usually sliding bearings to ensure a proper fit and provideadjustment for wear. |
| MACHINE COMPONENTS AND ATTACHMENTS |
GOGGLES |
These are worn when tool grinding, to protect the eyes fromthe flying particles of grit. |
| MACHINE COMPONENTS AND ATTACHMENTS |
HALF NUT |
A mechanism attached to the apron of a lathe and operatedby a lever. The lever opens and closes a nut that has been split lengthwiseso that the two halves of the nut can be closed upon the lead screw when threads are being cut. Also called SPLIT
NUT. |
| MACHINE COMPONENTS AND ATTACHMENTS |
HAND VICE |
Small vice used for holding light articles such as pins, screwsetc., especially during heat treatment. |
| MACHINE COMPONENTS AND ATTACHMENTS |
HAND WHEEL |
Any of the wheels found on machine tools for movingor positioning parts of a machine to hand feed, as the tailstock handwheelon a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
HARDIE HOLE |
Square hole in the face of an anvil which forms thelocation for the hardie and other tools used by the smith, such assmall swages, fullers and cutters. |
| MACHINE COMPONENTS AND ATTACHMENTS |
HEAD STOCK |
An assembly containing the headstock spindle and themechanism for driving it which is fastened permanently to the leftend of the lathe bed. |
| MACHINE COMPONENTS AND ATTACHMENTS |
HOLDING BLOCK |
Fixture designed to hold small or thin gauge parts which cannot readily be held in a vice. |
| MACHINE COMPONENTS AND ATTACHMENTS |
IDLER GEARS |
A gear or gears placed between driver and driven gears when the distance between the driver and driven gears would requiretoo exceptionally large gears. These gears have no effect on the speed orratio between the driver and driven gears. |
| MACHINE COMPONENTS AND ATTACHMENTS |
INDEPENDENT CHUCK |
A three jaw chuck, in which each of , the jaws may be moved independently of the other two. |
| MACHINE COMPONENTS AND ATTACHMENTS |
INDEX CRANK |
The crank handle of an index or dividing head used forturning the spindle through a full turn or fractional part of a turn. A pin on the crank fits into the holes of the index plate. |
| MACHINE COMPONENTS AND ATTACHMENTS |
INDEX PLATE |
A thin circular plate having various circles of holes. It isattached to the index head and used for obtaining fractional parts of aturn of the index crank. A set of three or more index plates may befurnished for an index head. |
| MACHINE COMPONENTS AND ATTACHMENTS |
INTERMEDIATE GEAR |
An idler or loose gear on a stud for transmittingpower between a driver and a driven gear. |
| MACHINE COMPONENTS AND ATTACHMENTS |
JACOB’S CHUCK |
Gear operated drill chuck of three jaw type for use ondrilling or milling machines and lathes. |
| MACHINE COMPONENTS AND ATTACHMENTS |
JACOB’S TAPERS |
Standard system of tapers which are used for drillchucks and spindles. |
| MACHINE COMPONENTS AND ATTACHMENTS |
JIG |
A device that locates and holds a workpiece and guides the cutting tool. |
| MACHINE COMPONENTS AND ATTACHMENTS |
JIG BUSH |
Hardened steel cylindrical guide, made a press fit into the body of the jig for a drill or reamer to pass through. |
| MACHINE COMPONENTS AND ATTACHMENTS |
JIG PLATE |
Flat steel plate provided with a number of bushed holes andused to locate the drill when drilling a component. |
| MACHINE COMPONENTS AND ATTACHMENTS |
JOURNAL BOX |
A housing or support for a bearing which contains the journal of the shaft. |
| MACHINE COMPONENTS AND ATTACHMENTS |
KEYS |
Metal pieces of various designs which fit into a slot in a shaft andproject above the shaft to fit into a mating slot in the center hole of agear or pulley to provide a positive drive between the shaft and thegear or pulley. |
| MACHINE COMPONENTS AND ATTACHMENTS |
KNEE |
A principal part of a column and knee type milling machine whichslides vertically on the column and carries the saddle and table. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LADLE |
Receptacle used for transporting molten metal. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LATHE CARRIER |
It is clamped on a bar and engaged with a projectingdog on the catch plate fitted to the lathe head stock. This enables thebar to revolve between the centres. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LATHE CENTERS |
Solid steel pieces which have a tapered shank and 60°pointed end. A live center fits into the headstock spindle and a deadcenter fits into the tailstock spindle to support and provide bearingpoints for the work turned between centers. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LAYOUT PLATE |
A smooth finished flat steel plate on which work andtools may be placed and used while laying out a job. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LEAD SCREW |
Master screw used for cutting a screw thread in a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LIVE CENTER |
A lathe center that fits into the headstock spindle and sonamed because it revolves. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LEVER |
A simple machine for obtaining mechanical advantage. The leverconsists of a rigid arm or bar pivoted or bearing on a point called thefulcrum and has a weight arm and a power arm. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LOCK NUT |
A type of nut that is prevented from loosening under vibration.The locking action is accomplished by squeezing, gripping or jammingagainst the bolt threads. |
| MACHINE COMPONENTS AND ATTACHMENTS |
LOOSE PULLEY |
A pulley which turns freely on a shaft so that a belt canbe shifted from the driving pulley to the loose pulley in order to stopa machine driven by an overhead belt drive. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MACHINE VICE |
A work holding device used on machine tools to seatand hold work securely in position while machining is done. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MAGNETIC BLOCK |
Laminated block for use in conjunction with amagenetic chuck. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MAGNETIC CHUCK |
Magnetic device for holding work duringmachining and grinding. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MANDREL |
A turned, hardened and accurately ground cylindrical bar orshaft or spindle, incorporating a slight taper, used for holding boredparts in a lathe while the outside surface is being turned. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MANDREL PRESS |
Press for the purpose of fitting mandrels to the boreof the work. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MANIPULATOR |
Fixture in which work is held for welding. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MILLING HEAD |
An attachment or device for the milling machine toadd to the range of operations for increasing production, versatility,and accuracy of the machine. A vertical attachment makes it possibleto do vertical milling on a horizontal machine. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MITER GEARS |
Bevel gears which have a center or pitch angle of 45°. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MORSE TAPER |
Standard system of tapers widely used on lathes anddrilling machines. |
| MACHINE COMPONENTS AND ATTACHMENTS |
MULTIPLE THREAD SCREW |
A screw with two or more threads cutaround the periphery of the workpiece to provide an increased lead with a specified pitch. |
| MACHINE COMPONENTS AND ATTACHMENTS |
NUT |
A metal fastener of square, hexagon or other shape having an internalthread which screws onto a bolt, stud, or arbor. |
| MACHINE COMPONENTS AND ATTACHMENTS |
NUT BOX MECHANISM |
In a lathe it is used to engage and disengagethe lead screw for thread cutting. This comprises a pair of half-nutscapable of sliding in vertical slides in or out of mesh with the leadscrew. |
| MACHINE COMPONENTS AND ATTACHMENTS |
OVERARMS |
Adjustable supports for the end of a milling cutter arborfarthest from a milling machine spindle. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PARALLEL JAW VICE |
Type of vice in which the gripping faces betweenthe sliding and fixed jaws are always parallel, irrespective of the gapbetween them. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PILOT |
A guide at the end of a counterbore which fits freely into thedrilled hole to hold and align the body of the counterbore while cuttingtakes place. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PINION |
The smaller of a pair of gears regardless of the size or type. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PIN VICE |
Small vice with self centering jaws useful for gripping smallrods, wires, drills and files. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PIPE THREAD |
A 60° thread form having flattened crests and roots whichare cut on a taper having 3/4 inch taper per foot. Pipe thread is used onpiping and tubing. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PIPE VICE |
Clamping device designed to hold work of tubular or circularsection. |
| MACHINE COMPONENTS AND ATTACHMENTS |
POWER ASSISTED CHUCKS |
These are used where great holding poweris required. These are operated with auxiliary power such as compressedair or oil pressure. Where simplicity of chucking is the first consider-ation, magnetic chucks are used. |
| MACHINE COMPONENTS AND ATTACHMENTS |
PULLEY |
A wheel having a plain or V groove rim over which a belt runsfor the transmission of power from one shaft to another. |
| MACHINE COMPONENTS AND ATTACHMENTS |
QUICK CHANGE GEARBOX |
A cluster of gears on a machine toolarranged in such a way that a sliding gear can be moved by a lever tomesh with anyone of the gears in the cluster to obtain desired ratio of speeds, feeds or thread pitches. |
| MACHINE COMPONENTS AND ATTACHMENTS |
QUICK RETURN MECHANISM |
A mechanism on various machinetools to give a table, ram or other movable part a rapid movementduring the return or non-cutting stroke. |
| MACHINE COMPONENTS AND ATTACHMENTS |
QUILL |
A hollow shaft that revolves on a solid shaft, carrying pulleys,gears or clutches. When the clutch is closed, the quill and shaft revolvetogether. |
| MACHINE COMPONENTS AND ATTACHMENTS |
RACK |
A straight metal strip having teeth that mesh with those of a gear toconvert rotary motion into reciprocating motion or just the opposite. |
| MACHINE COMPONENTS AND ATTACHMENTS |
RATCHET |
A gear with triangular shaped teeth to be engaged by a pawl whichgives it intermittent motion or locks it against backward movement. |
| MACHINE COMPONENTS AND ATTACHMENTS |
RELIEVING ATTACHMENT |
A device or mechanism fastened to thecross feed of a lathe to provide a reciprocating motion to the cuttingtool, to obtain a clearance in the back of the cutting edges of the teeth when making taps, milling cutters or hobs. |
| MACHINE COMPONENTS AND ATTACHMENTS |
REVERSE LEVER |
A lever on the machine tool for changing the directionof some movable part such as the lead screw on a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
REVOLVING LATHE CENTRE |
It is fitted in the tailstock instead of thefixed type of loose head centre, in some cases, so that the high speedsof work revolutions become possible. |
| MACHINE COMPONENTS AND ATTACHMENTS |
RIGHT HAND THREAD |
A screw thread which advances into the matingpart when turned clockwise or to the right. |
| MACHINE COMPONENTS AND ATTACHMENTS |
RIVET |
A one piece fastener consisting of a head and a body and used forfastening two or more pieces together by passing the body through ahole in each piece and then forming a second head on the body end.It cannot be removed except by taking off the
head. |
| MACHINE COMPONENTS AND ATTACHMENTS |
ROLLER STEADY |
Type of steady fitted with roller points to supportlong or slender work in a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
ROTARY TABLE |
An attachment for the milling machine consisting of around work holding table provided with T slots and operated by ahandwheel attached to a worm or worm gear for rotating the table. A scale graduated in degrees permits the work to be moved any
numberof degrees for spacing holes or milling radii. Also called CIRCULAR MILLING ATTACHMENT. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SCREW |
A helix formed or cut on a cylindrical surface which may advancealong the axis to the right or left. The helix may be single or multiple. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SCREW JACK |
Device used for lifting a heavy load by means of a screw. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SCREW THREAD |
A ridge of uniform section or shape in the form of ahelix on the external or internal surface of a cylinder, or in the form of a conical spiral on the external or internal surface of a cone. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SELF CENTERING CHUCK |
Design of chuck for holding hexagonal orcylindrical work, operating in such a way that the work is automatically centered. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SET SCREW |
Usually a hardened steel screw having either no head or asquare head and with various designs of points or ends to lock ortighten adjustable machine parts in position on a shaft. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SHOULDER SCREW |
A screw having two or more diameters orshoulders and commonly used for supporting levers and othermachine parts that have to operate freely. The screw body is slightly longer than the thickness of the piece pivoted on the screw so as toallow the
piece to move freely when the screw is set up tightly againstthe bottom of the shoulder. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SLEEVE |
A round piece of metal having a straight or tapered hole whichfits over or into another piece to adapt parts to fit, as a taper sleeve fora lathe center. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SLIDE REST |
A tool holding slide used on machine tools. It is usually adjustable for holding and guiding cutting tools. The compound slideor rest used on an engine lathe is an example. The compound slidepermits the tool to be fed at any angle. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SLIDING TABLE (compound) |
Device to enable holes to be drilled orbored very accurately with respect to each other. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SNAP FLASK |
trongly constructed wooden moulding box, split diagonally with hinges on one corner and locking latches on the opposite corner,so that the box may be removed from the mould prior to casting. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SOCKET HEAD |
Screw threads having a hexagonal or other form of recessed socket in the head so that the screw can be turned with a wrench or key, as a hexagonal key. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SPLINES |
Multiple keys cut in either a shaft or a hole of parts that are madeto slide or move lengthwise on a shaft, as a sliding gear transmission. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SPLIT NUT |
A nut which has been cut length wise so as to open for quick adjustment. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SPRING COLLETS |
A type of draw in collet made of hardened steel andhaving three slots or saw cuts which permit the collet to be closed tightly against a tapered sleeve by the draw bar. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SQUARE THREAD |
A form of screw thread in which the cross-section of the thread forms a square, making the width of the thread equal to the width of the space between the threads. |
| MACHINE COMPONENTS AND ATTACHMENTS |
STAKE |
Small anvil used for sheet metal work. |
| MACHINE COMPONENTS AND ATTACHMENTS |
STEADY REST |
A support attached to the ways of a lathe for turning long workpieces. Used to prevent slender work from springing away fromthe cutting tools or to permit machining operations to be performedon the end of the workpiece. Some times called a center
rest or STEADY. |
| MACHINE COMPONENTS AND ATTACHMENTS |
STEP BLOCK |
A block of steel or cast iron having a series of steps andused for supporting the ends of machine clamps when clamping work to the table. |
| MACHINE COMPONENTS AND ATTACHMENTS |
STEPPED CONE PULLEY |
A cone pulley having several diameters orsteps for obtaining different speeds on machine tools. |
| MACHINE COMPONENTS AND ATTACHMENTS |
STOPS |
Devices attached to the movable table or ram or parts of a machinetool, such as a milling machine table, to limit the amount of travel. |
| MACHINE COMPONENTS AND ATTACHMENTS |
STUD |
A plain cylindrical piece having a threaded portion of suitable lengthat each end or a continuous thread over the entire length. One end isscrewed into a machine or workpiece after which a second part is placedover the stud and held in place by
a nut. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SWIVEL SLIDE |
Device to enable the toolpost slide of a lathe to be set atan angle for taper turning or cutting V threads. |
| MACHINE COMPONENTS AND ATTACHMENTS |
SWIVEL VICE |
A bench or machine vice for holding workpiece whichmay be rotated on its base to the desired angle or position. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TABLE (marking off) |
Table used for marking off, or setting out a job tobe machined. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TAILSTOCK |
The principal part of the engine lathe, used for supportingone end of a workpiece by means of a center point held in the spindle.May be moved along the ways and clamped in different positions andoffset from the true axis of the lathe for turning
tapers. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TAPER PINS |
Steel pins used for locating and holding machine parts inposition on a shaft. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TAPER TURNING ATTACHMENT |
Device fitted to a lathe, to causemovement of cutting tool at an angle to the axis of the lathe so as toproduce the required taper on the workpiece. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TAYLOR CHUCK |
Special chuck designed so that the jaws are supportedat right angles to the direction of the pressure. |
| MACHINE COMPONENTS AND ATTACHMENTS |
T-BOLT |
A threaded bolt having a square or rectangular end which fits intothe T slot of a machine table for clamping workpieces. |
| MACHINE COMPONENTS AND ATTACHMENTS |
THREAD CHASING DIAL |
A device consisting of a short shaft with adial at the top and a worm gear at the bottom to mesh with the leadscrew on an engine lathe which is attached to the lathe carriage, sothat the operator can engage the split nut lever at the correct position
when cutting screw threads. |
| MACHINE COMPONENTS AND ATTACHMENTS |
THREE JAW CHUCK |
Chuck for gripping general work using three jaws,usually concentrically, simultaneously, a feature which makes the chuck particularly suitable for holding either round or hexagon stock. |
| MACHINE COMPONENTS AND ATTACHMENTS |
THUMB SCREW |
A type of screw having a winged or knurled head forturning by hand when a quick and light clamping effect is desired. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TOOL HEAD |
The part of machine tool that carries the cutting tool andis adjustable for moving and setting the cutting tool into the workpiecebeing machined. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TOOL HOLDER |
Slotted shank in which the tool bit can be held. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TOOL POST |
A clamping device for holding tool holder in position on amachine tool. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TOP SLIDE |
Means of traversing the tool on the tool post of a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
T-SLOT |
A recessed or undercut slot made with a special T shaped cutter inthe tables of machine tools to receive the square head of a T bolt forclamping workpieces. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TUMBLER GEARS |
Two gears acting as idler gears between the spindlegear and the fixed stud gear on a lathe gear train. Used to reverse thedirection of rotation of the lead screw for thread cutting or the feedrod for turning. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TURRET |
Rotatable device for holding several cutting tools set in positionto operate in turn. |
| MACHINE COMPONENTS AND ATTACHMENTS |
TWO JAW CHUCK |
Chuck furnished with two jaws, diametrically opposite. |
| MACHINE COMPONENTS AND ATTACHMENTS |
U-BOLT |
An externally threaded fastener bent in the shape of the letter Uand with both ends threaded. |
| MACHINE COMPONENTS AND ATTACHMENTS |
U-CLAMP |
A flat or square piece of metal bent or formed into the shapeof the letter U and used for clamping workpieces on a machine table. |
| MACHINE COMPONENTS AND ATTACHMENTS |
UNIVERSAL CHUCK |
Design of chuck in which the jaws are movedsimultaneously by gear wheels, by a scroll or by a combination of both. Also called concentric chuck or self centering chuck. |
| MACHINE COMPONENTS AND ATTACHMENTS |
UNIVERSAL INDEX CENTERS |
A dividing head and foot stock with aset of change gears to gear the spindle of the index head to the indexcrank for differential indexing, and to gear the index head to the lead-screw of the table of a milling machine for helical milling. |
| MACHINE COMPONENTS AND ATTACHMENTS |
UNIVERSAL VICE |
A work holding device usually used on the millingmachine which has either two or three swivel settings so that workpiecesmay be set at any desired angle including compound angles. |
| MACHINE COMPONENTS AND ATTACHMENTS |
V-BLOCK |
Block of metal having a V-shaped groove cut in its top surfacein which can rest a circular shaft. |
| MACHINE COMPONENTS AND ATTACHMENTS |
V-SUPPORT |
Steady in the form of a V, to support the work near thecutting tool. |
| MACHINE COMPONENTS AND ATTACHMENTS |
VICE |
A mechanical device of many designs and sizes in which workpiecesare clamped for hand and machine operations. |
| MACHINE COMPONENTS AND ATTACHMENTS |
VICE CLAMP |
Piece of soft material so shaped as to enable it to fit overeach of the hardened jaws of a vice in order that workpieces may begripped without damage. |
| MACHINE COMPONENTS AND ATTACHMENTS |
V-WAYS |
The top part of the bed of a lathe, planer or other machine bed which acts as a bearing surface for aligning and guiding the movingparts, such as the carriage of a lathe. |
| MACHINE COMPONENTS AND ATTACHMENTS |
WAYS |
The flat or V shaped bearing surfaces on machine tools over whichother movable parts slide. |
| MACHINE COMPONENTS AND ATTACHMENTS |
WOODRUFF KEY |
A flat semicircular piece of metal used as a key in aspecial circular key seat slot cut in a shaft to drive a gear, pulley orother part. |
| TOOLS AND CUTTERS |
ABOUTSLEDGE |
The large hammer used by a blacksmith’s mate, turn-about with the smaller hammer of the blacksmith. |
| TOOLS AND CUTTERS |
ANGLE CUTTER |
Type of milling cutter used for single or double angles.The term angle cutter covers three types of milling cutters, the singleor half-angle, the double angle and the equal or combined angle. |
| TOOLS AND CUTTERS |
BACK STICK |
Piece of wood used when spinning sheet metal by hand ina lathe. |
| TOOLS AND CUTTERS |
BASTERED FILE |
File of approximately middle grade in regard to cut ortooth pitch. |
| TOOLS AND CUTTERS |
BELL CENTER PUNCH |
Device used for rapidly locating and markingthe centre of the flat end of a cylindrical workpiece, preparatory toheavier centre punching, centre drilling, turning in a lathe etc. |
| TOOLS AND CUTTERS |
BLANKING AND CUPPING TOOL |
Tool used to cut a blank andform a cup from sheet or strip metal at one stroke of the press. |
| TOOLS AND CUTTERS |
BLOW PIPE |
Gas welding torch in which oxygen and acetylene are mixedand ejected from a nozzle. |
| TOOLS AND CUTTERS |
BOILER TAP |
Hand tap specially designed for tapping holes for use withboiler stays. |
| TOOLS AND CUTTERS |
BOLSTER |
It is a block of mild steel with a hollow in it to accommodatethe rivet head. |
| TOOLS AND CUTTERS |
BORING BAR |
Bar carrying a cutter or cutters to enable holes to be bored which are larger in diameter than can be conveniently drilled by meansof twist drills. |
| TOOLS AND CUTTERS |
BORING TOOL |
Single or double ended tool for machining a drilled orcored hole. |
| TOOLS AND CUTTERS |
BOX SPANNER |
Spanner in the form of a hollow tube, shaped at the end(or ends) to fit a nut. |
| TOOLS AND CUTTERS |
BOX WRENCH |
A type of closed end wrench made in many styles forspecific sizes and shapes of bolt heads or nuts. |
| TOOLS AND CUTTERS |
BREAST DRILL |
Has an adjustable breast plate, by means of which amuch greater pressure may be applied to the drill. This hand-drill hasdouble ratio drive. |
| TOOLS AND CUTTERS |
BROACH |
A long tool with number of cutting teeth which is pushed or pulledthrough a hole or across a surface to form the desired shape and size. |
| TOOLS AND CUTTERS |
CAULKING TOOL |
Type of tool used to close the riveted joints on pressurevessels, for instance, a boiler, or compressed air reservoir. |
| TOOLS AND CUTTERS |
CEMENTED CARBIDE TOOL |
Lathe or other cutting tool fitted witha tip made from either tungsten, tantalum or titanium carbide, heldin a matrix of cobalt. |
| TOOLS AND CUTTERS |
CENTER DRILL |
A short, stubby, straight shank, two fluted twist drillthat is used when center holes are drilled and reamed in the ends of ashaft in separate operations. |
| TOOLS AND CUTTERS |
CENTER POP |
A dot punch or sharply pointed center punch. |
| TOOLS AND CUTTERS |
CENTER PUNCH |
Hand tool employed for marking out points or centers e.g., when marking the center of a shaft preparatory to drilling or centerdrilling. |
| TOOLS AND CUTTERS |
CENTER REAMER |
A countersink having a 60° included angle for sizingand smoothing center holes in workpieces to be turned or groundbetween centers. |
| TOOLS AND CUTTERS |
CERAMIC TOOLS |
A newer cutting tool material made of aluminiumoxide or silicon carbide and held together by binders or additives of other materials. |
| TOOLS AND CUTTERS |
CHAIN CUTTER |
Cutter of chain type used in a chain mortise machinefor the mortising of wood. |
| TOOLS AND CUTTERS |
CHASER |
Tool for forming or finishing screw threads in a lathe. |
| TOOLS AND CUTTERS |
CHIP BREAKER |
A groove ground into the top of the toolbit of a lathe,shaper or planer to keep the chips short. |
| TOOLS AND CUTTERS |
CHISELS |
These are hand working tools, made from carbon tool steel,usually of octagonal section. The end of the chisel is shaped to therequired form and finished by grinding. |
| TOOLS AND CUTTERS |
COMPARATOR |
Instrument for comparing the dimensions of acomponent with a standard of length. |
| TOOLS AND CUTTERS |
COMPASS |
Instrument used for describing arcs and circles. |
| TOOLS AND CUTTERS |
COTTER MILL |
Also called slotting end mill, cottering or key seatingcutter. |
| TOOLS AND CUTTERS |
COUNTERBORE |
When a drilled hole is to be enlarged concentrically fora portion of its length, a counterbore is used. It consists of a series of blades arranged to cut on the ends only, and a smooth pilot slightly smaller than the drilled hole. |
| TOOLS AND CUTTERS |
CROSS CUT FILE |
File which is parallel throughout its length and insection tapers more sharply than a knife file, used extensively forsharpening the teeth of cross cut saws. |
| TOOLS AND CUTTERS |
CROSS CUT OR CAPE CHISEL |
It is forged so that the cutting edge isslightly wider than the body, this is to ensure that the chisel does notbind in the cut when it is used for deep grooves. |
| TOOLS AND CUTTERS |
CROSS PEEN HAMMER |
A hammer with a wedge shaped peening endat right angles to the direction of the handle. |
| TOOLS AND CUTTERS |
CURLING TOOL |
Tool designed and made to curl the edge of a metal article. |
| TOOLS AND CUTTERS |
DEAD SMOOTH FILE |
A file having teeth of very fine cut in other words, with its teeth very closely spaced or pitched. |
| TOOLS AND CUTTERS |
DIAMOND POINT CHISEL |
A type of cold chisel ground with adiamond point. |
| TOOLS AND CUTTERS |
DIAMOND WHEEL |
An abrasive wheel composed of a bonding agent,into which crushed and screened diamond particles of appropriatesize are introduced to form the abrasive cutting face. |
| TOOLS AND CUTTERS |
DIE (drawing) |
Tool of angular form through which a shell is pushed,tubes, sections, bar and wire are pulled so as to give the required sizeand cross-sectional shape. |
| TOOLS AND CUTTERS |
DIE NUT |
Tool, shaped like a square or hexagonal nut, and provided withcutting edges, employed for cutting or sizing external threads. |
| TOOLS AND CUTTERS |
DIE PLATE |
Tool in the form of a flat plate of good quality cast steelhaving a number of drilled and tapped holes, employed in hand cuttingscrew threads on rods of about 5 mm in diameter or smaller. |
| TOOLS AND CUTTERS |
DOT PUNCH |
Light type of sharply pointed centre punch used for lightcentre dotting along a scribed line to make it more easily visible or toensure a permanent record of its location. |
| TOOLS AND CUTTERS |
DOUBLE CUT FILE |
A file having teeth formed by two intersectingseries of parallel chisel cuts. |
| TOOLS AND CUTTERS |
DREADNOUGHT FILE |
A file with coarsely pitched curved teeth orchisel form produced by cutting curved tooth spaces in the blank. |
| TOOLS AND CUTTERS |
DRESSER |
Tool used in sharpening grinding wheels of abrasive material,usually a diamond tool. |
| TOOLS AND CUTTERS |
DRILL |
Tool used for the production of round holes in metal and othersolid material. |
| TOOLS AND CUTTERS |
DRILL POST AND RATCHET |
Portable hand operated drilling machine,comprising three parts—the post or pillar, the arm, and the ratchet brace. |
| TOOLS AND CUTTERS |
EMERY WHEEL |
A grinding wheel made from emery or natural abrasive. |
| TOOLS AND CUTTERS |
END MILL |
A milling cutter having a straight or tapered shank for mountinginto a holder for driving. The cutting portion has teeth on the end as well as on the circumference. |
| TOOLS AND CUTTERS |
EXPANSION REAMER |
A type of hand or machine reamer in which thediameter may be slightly increased by an expanding screw. |
| TOOLS AND CUTTERS |
EXY OUT |
A tool for removing a broken stud or bolt from a hole. A hole isdrilled into or through the portion of the stud remaining in the hole.Then the exy out is screwed into the hole and when the tool is turnedcounter clockwise, the broken portion is
removed from the hole. |
| TOOLS AND CUTTERS |
FACE MILL |
A milling cutter similar to an end mill but of a larger size. |
| TOOLS AND CUTTERS |
FEELER GAUGE |
Leaf gauge, rather like a multibladed pen knife, thevarious leaves or blades all having different thicknesses. |
| TOOLS AND CUTTERS |
FILE |
Steel tool used for smoothing rough surfaces, and for reducing the thicknessof material by abrasion. The teeth may be single cut or double cut. |
| TOOLS AND CUTTERS |
FILE CARD |
Device fashioned like a wire brush, used to clean dirt andchips from the teeth of a file. |
| TOOLS AND CUTTERS |
FINISHING TOOL |
Tool for taking a light finishing cut, a knife edge toolused with a fine feed or a round nose finishing tool with a coarse feed. |
| TOOLS AND CUTTERS |
FLAT CHISEL |
Commonest form of cold chisel having a long single cuttingedge. |
| TOOLS AND CUTTERS |
FLAT DRILL |
Type of drill in general use before the introduction of thetwist drill, having flat sides and, therefore, no true cutting action, theflat drill is inclined to have a scraping action rather than cutting. |
| TOOLS AND CUTTERS |
FLAT FILE |
General utility file having a rectangular section, parallel inboth width and thickness for about two thirds its length and slightly tapered off in both width and thickness towards the point for the restof its length. They are double cut on their
wide working faces, but aresingle cut on both their narrow edges. |
| TOOLS AND CUTTERS |
FLAT ENDED DRILL |
by means of which a hole previously drilled to thecorrect depth with a twist drill may be squared out to a flat bottom,the small “pip” is necessary to ensure that the drill runs concentrically. |
| TOOLS AND CUTTERS |
FLUTED CHUCKING REAMER |
A machine reamer which has straightor helical flutes to provide cutting edges over the entire length of theflutes. Intended for removing a small amount of metal and for finishinga hole accurately and smoothly. |
| TOOLS AND CUTTERS |
FLY CUTTER |
A single point tool for use on milling machines. |
| TOOLS AND CUTTERS |
FOLLOWON TOOL |
Multistage press tool incorporating such operationsas blanking, piercing, marking and bending and used in either in ahand or single action power press. |
| TOOLS AND CUTTERS |
FORMING TOOL |
A cutting tool used for forming regular or irregularshapes. The cutting tool is ground to the shape desired and reproducesthis shape on the workpiece. |
| TOOLS AND CUTTERS |
FORM MILL |
Milling cutter used for a specific form or shape. |
| TOOLS AND CUTTERS |
FULLER |
Tool used by the smith for making rivetted joints or shaped work on the anvil, or working under the power hammer. |
| TOOLS AND CUTTERS |
GATE KNIFE |
Moulder’s tool used for cutting away sand to form the gatepassage through which metal must run from the main supply to themould cavity. |
| TOOLS AND CUTTERS |
GEAR CUTTERS |
Accurately formed cutting tools of hardened steel havingshaped teeth that cut the spaces between the teeth of a gear to the preciseshape and size required. |
| TOOLS AND CUTTERS |
GRINDING WHEEL |
Abrasive wheels in which the abrasive material isheld together by a bonding material. The elements that make up the wheel are (1) abrasive, (2) grain size, (3) bond, (4) grade and (5) structure.There are nine standard shapes and many sizes and
grades for grindingpractically all kinds of materials. |
| TOOLS AND CUTTERS |
HACKSAW |
Tool employed in cutting bars, rods, tubes etc., of small size,it consists essentially of a frame, a handle and a blade. |
| TOOLS AND CUTTERS |
HALF ROUND FILE |
File which has a section like a segment of a circle(less than a semicircle). |
| TOOLS AND CUTTERS |
HAMMER (pneumatic) |
Hammer held and applied to the work by hand,but actuated by compressed air. |
| TOOLS AND CUTTERS |
HAMMER (sledge) |
Tool with a steel head and a wooden handle, a largertype of hammer which may have the head weighing from, say 2 to 7 kg with the handle varying from, say 60 to 90cm in length. |
| TOOLS AND CUTTERS |
HAND CHASERS |
are made in pairs one for internal work, and the otherfor external work. These are used only for small threads on brass, or forrounding off the tops and bottoms of threads previously formed by the vee tool in the screw cutting lathe. |
| TOOLS AND CUTTERS |
HAND FILE |
Commonly used file parallel in width from the tang to thetip, but slightly thinned off in thickness for about one third of itslength towards the point. |
| TOOLS AND CUTTERS |
HAND HAMMER |
Type of hammer employed by fitters, machinists andso on, the head weighing from 12 to 24 oz |
| TOOLS AND CUTTERS |
HAND TAP |
hardened and tempered steel tool for cutting internal threads.It has a thread cut on it, and is fluted to provide cutting edges. A squareat the shank end makes it possible to attach a wrench for turning by hand. |
| TOOLS AND CUTTERS |
HAND TOOL |
A general term that applies to wide variety of small toolsused by hand instead of being power driven, as layout tools, wrenchesand hammers. |
| TOOLS AND CUTTERS |
HOLLOW MILL |
Type of milling cutter in which the work passes throughthe center of the cutter. |
| TOOLS AND CUTTERS |
HOB |
Fluted rotary cutter used to produce spur, helical, and worm gears, a worm shaped cutting tool having a number of flutes or gashes runningacross the threads so that a series of cutting edges is formed. |
| TOOLS AND CUTTERS |
INDENTER |
Tool used to form an indentation i.e.,a small recess in thesurface of an article. |
| TOOLS AND CUTTERS |
INSERTED TIP TOOL |
Lathe tool with a specially hard tip inserted in acertain steel holder. |
| TOOLS AND CUTTERS |
INSERTED TOOTH CUTTER |
Milling cutter with separate teeth fittedinto a body or hob. |
| TOOLS AND CUTTERS |
INTER LOCKING CUTTERS |
Milling cutters consisting of two sections.Mating sections are similar to half side cutters or staggered tooth sidecutters with uniform or alternate helical teeth so designed that thepaths of teeth overlap when in proper assembly |
| TOOLS AND CUTTERS |
KEYWAY MILL |
Cutter for milling of keyways in shafts, made in standard widths from 1/6 to 3/8 inch and diameters from 1/2 to 11-2inch. |
| TOOLS AND CUTTERS |
KNIFE FILE |
File in transverse section tapers symmetrically from one edgeto the other, like a wedge or a knife, used for filing in narrow spaces andcleaning sharp corners. |
| TOOLS AND CUTTERS |
KNURLING TOOL |
Tool to cut a knurl or diamond shaped impressionon the surface of a component. |
| TOOLS AND CUTTERS |
LAP |
A tool for finishing internal and external surfaces of the workpiece by charging the lap with a fine abrasive. Always made from metals whichare softer than the metal being lapped. |
| TOOLS AND CUTTERS |
LAPPING STONE |
Stone used for lapping operations, especially on toolsand cutters of high speed steel and tungsten carbide. |
| TOOLS AND CUTTERS |
LEAD HAMMER |
A soft hammer made of lead for tapping, seating andadjusting work pieces to prevent damaging the finished surface. |
| TOOLS AND CUTTERS |
LEFT HAND CUTTER |
In lathe work, a cutting tool that cuts when fedfrom left to right or towards the tailstock. For milling cutters, whenviewed from the spindle or shank end, the cutter would turn counter-clockwise. |
| TOOLS AND CUTTERS |
LEFT HAND SCREW |
One that screws into the mating part or advances when turned to the left or counterclockwise. |
| TOOLS AND CUTTERS |
LOADED WHEEL |
A grinding wheel that has become dull or filled upfrom the abrasive particles of the material being ground. |
| TOOLS AND CUTTERS |
MACHINE TAPS |
Taps designed for continuous rather than intermittentcutting and which have less land, more chip space, spiral or straightflutes, and longer shanks on some types. |
| TOOLS AND CUTTERS |
METAL BAND SAW |
A power driven precision saw having an endlessblade which runs over two wheels mounted one above the other andused to cut metal. |
| TOOLS AND CUTTERS |
METAL SLITTING SAW |
A thin milling cutter for slotting or cutting off stock in a milling machine. |
| TOOLS AND CUTTERS |
MILLING CUTTER |
Rotary cutter having teeth and spaces on thecircumference and side or end faces of steel discs, used on millingmachines. |
| TOOLS AND CUTTERS |
NAIL PUNCH |
Punch used by wood workers to drive the head of a nail alittle below a surface. |
| TOOLS AND CUTTERS |
NECKING TOOL |
Tool designed and used to reduce the diameter of acomponent and thus form a neck. |
| TOOLS AND CUTTERS |
NEEDLE FILE |
Small, light files usually restricted in length to 3 to 4 inch,made with a variety of cross-sectional shapes. |
| TOOLS AND CUTTERS |
NUMBER SIZE DRILLS |
A system of drill sizes for small drills in whichthe diameters are designated by numbers from No 1 the largest, to No80 the smallest. |
| TOOLS AND CUTTERS |
OIL STONE |
Stone employed for sharpening edged tools. |
| TOOLS AND CUTTERS |
PARALLEL ROUND FILE |
ingle cut file of circular cross-section parallelthroughout its length, usually known as a blunt round or gulleting file. |
| TOOLS AND CUTTERS |
PARALLEL SQUARE FILE |
Type of file of square section parallelthroughout its length, usually known as a square blunt file. |
| TOOLS AND CUTTERS |
PIERCING SAW |
esembling a wood-work fret saw is used for cuttinginternal holes, slots and shapes, its lower jaw is adjustable for blades of varying lengths. |
| TOOLS AND CUTTERS |
PIN PUNCH |
Type of punch, sometimes called a drive pin punch, employedin removing dowel pins, cotter pins, rivets and similar light objectsused as temporary fastenings, also for punching small holes in sheetmetal. |
| TOOLS AND CUTTERS |
PLAIN MILLING CUTTER |
A milling cutter that has cutting teeth onthe circumference surface only. |
| TOOLS AND CUTTERS |
PLANER TOOL |
Tool used in a planing machine made of different sizes,shapes and materials. |
| TOOLS AND CUTTERS |
PNEUMATIC TOOL |
Design of hand tool operated by air pressure. |
| TOOLS AND CUTTERS |
PUNCH (hand) |
Tool used for producing a rough hole. |
| TOOLS AND CUTTERS |
PULLEY TAP |
A thread cutting tap having a very long shank for tappingset screw holes in pulleys. |
| TOOLS AND CUTTERS |
RADIUS CUTTER |
A side or end milling cutter which has the edges of the teeth ground to specified radius so that it will reproduce the radiuson the workpiece. |
| TOOLS AND CUTTERS |
RAMMER |
Tool used by foundry workers for consolidating sand. |
| TOOLS AND CUTTERS |
RATCHET DRILL |
Short type of drill for use in a ratchet brace. |
| TOOLS AND CUTTERS |
REAMER |
Multiedged cutting tool having cutting edges arranged downthe length of the tool, the teeth (and the flutes) being either straightand parallel to the axis or alternatively helical with a lead opposite tothe direction of rotation. |
| TOOLS AND CUTTERS |
RECESSING TOOL |
Type of tool employed to cut recesses in bored holes. |
| TOOLS AND CUTTERS |
RIFFLER |
File with a curved working surface specially made for filingconcave surfaces, such as the insides of oddly shaped holes in castings. |
| TOOLS AND CUTTERS |
RIGBY HAMMER |
Steam hammer used for a wide range of forging work. |
| TOOLS AND CUTTERS |
RIGHT CUT TOOL |
A single point lathe tool, which when used in a lathe,the cutting edge is on the left side and cuts when fed from right to left. |
| TOOLS AND CUTTERS |
RIGHT HAND CUTTER |
A term used to describe both rotation andhelix of milling cutters. A cutter that rotates clockwise when viewedfrom the spindle end is said to have right hand rotation. A cutter hasa right hand helix when the flutes slant downward to the right
whenviewed from the front or twist clockwise when viewed from the end. |
| TOOLS AND CUTTERS |
RIVET PUNCH |
Tool for piercing holes for rivets, few have a spiral cutting edge. |
| TOOLS AND CUTTERS |
RIVET SET |
Tool used to shape the head of a rivet, and sometimes knownas cup tool and snap. |
| TOOLS AND CUTTERS |
ROLLER, KNURLING |
Grooved roller for the purpose of producing aknurled or roughened surface on the outside of the work. |
| TOOLS AND CUTTERS |
ROSE CHUCKING REAMER |
Type of reamer with straight flutes toenlarge deep holes or holes of large diameter, in machined parts. |
| TOOLS AND CUTTERS |
ROSE REAMER |
A machine reamer designed so that all the cutting is doneon the bevelled ends of the teeth instead of on the sides, sometimes alsocalled ROSE SHELL REAMER. |
| TOOLS AND CUTTERS |
ROUGH FILE |
Type of file having coarsely cut teeth, approximately 20teeth per inch. |
| TOOLS AND CUTTERS |
ROUGHING TOOL |
Lathe tool designed to take a heavy cut forpreliminary roughing cut. |
| TOOLS AND CUTTERS |
ROUND FILE |
Type of file of circular section throughout its length, madein two forms, taper (or slim) and parallel (blunt) . |
| TOOLS AND CUTTERS |
ROUND NOSE CHISEL |
Hand cutting tool used for incising grooves inbearings and bushes, roughing out filleted corners and so on. |
| TOOLS AND CUTTERS |
ROUND NOSE TOOL |
A single point cutting tool having a round noseand with or without side rake angles. With no side rake it may be usedto cut either right or left hand. |
| TOOLS AND CUTTERS |
SAFE EDGE FILE |
File with one edge left uncut and it is very useful when working against a shoulder. |
| TOOLS AND CUTTERS |
SCRAPER |
Tool used to reduce the high spots on a surface which haspreviously been smoothed as far as possible by machining or filing.Scraping is hand operation. |
| TOOLS AND CUTTERS |
SAW SHARPENING FILE |
Type of file used for sharpening saw teeth, itsshape being dependent on the shape of the teeth (mill file, cross cutsaw file, taper saw file, double ended taper saw file). |
| TOOLS AND CUTTERS |
SCREW PLATE |
A set consisting of the more commonly used taps anddies, a tap wrench, and a die stock, cased in a wooden box. |
| TOOLS AND CUTTERS |
SCREW SLOTTING SAWS |
A series of thin saws of various widths,generally used in an automatic screw machine but sometimes in amilling machine, to cut the slots in the heads of screws. |
| TOOLS AND CUTTERS |
SCREW TAP |
Tool used in producing a screw thread in a hole i.e., aninternal thread. |
| TOOLS AND CUTTERS |
SCRIBER |
Metal tool, shaped something like a thin pencil, having a sharply pointed end for marking lines on metal surfaces so as to locate thepositions of holes, angles, machining boundaries. |
| TOOLS AND CUTTERS |
SCRIBING BLOCK |
Tool comprising a heavy base, a rigid vertical spindleand a sleeve device capable of travelling up and down the spindle andholding a scriber, used primarily on surface plates for the purpose of scribing lines parallel to a level surface or to
another line. |
| TOOLS AND CUTTERS |
SECOND CUT FILE |
Type of file having a grade of cut between a bastardfile and a smooth file. |
| TOOLS AND CUTTERS |
SET |
The bend to one side of the teeth of a saw. Also, any deformation of metal or other material stressed beyond its elastic limit. |
| TOOLS AND CUTTERS |
SET FILE |
Type of file bent or set to a special shape to make possible thefiling of some part of a workpiece otherwise inaccessible. |
| TOOLS AND CUTTERS |
SHANK |
The non-cutting end of a tool which fits into the holding devicefor driving, as the taper shank on a drill. |
| TOOLS AND CUTTERS |
SHAPING TOOL |
Cutting tool used in a shaping machine, and is designedto withstand a certain amount of shock, not only when starting, butalso when they are forced across the surface of the metal. |
| TOOLS AND CUTTERS |
SHEARS (hand) |
Scissors like cutting tool used for hand cutting sheetmetal to the required shapes. |
| TOOLS AND CUTTERS |
SHELL END MILL |
Large type of end mill ranging from 11-4to 3 inchdiameter. The body of the cutter is slightly less in length than its diameter,and is made with a hole through the centre to fit a standard arbor |
| TOOLS AND CUTTERS |
SHELL REAMER |
Type of reamer with a central hole which can be mountedon a suitable arbor. The term shell is used to differentiate this type of reamer from the solid reamer. |
| TOOLS AND CUTTERS |
SINGLE CUT FILE |
A file that has single rows of parallel teeth arranged atan angle across the face. |
| TOOLS AND CUTTERS |
SINGLE POINT CUTTER |
Boring cutter with one point only for use ina boring bar. |
| TOOLS AND CUTTERS |
SIDE AND FACE MILL |
Milling cutter with teeth on the sides andcircumference. |
| TOOLS AND CUTTERS |
SIDE FACE TOOL |
Knife edged tool for side turning or facing. |
| TOOLS AND CUTTERS |
SIDE TOOL |
Knife tool used for ordinary turning in a lathe. |
| TOOLS AND CUTTERS |
SLABBING CUTTER |
A wide face milling cutter designed for heavy roughing cuts. |
| TOOLS AND CUTTERS |
SLIDE BEVEL |
Angles between adjacent surfaces of an object, which arenot 90 degree are tested with the slide bevel. |
| TOOLS AND CUTTERS |
SLITTING SAW |
Circular saw for use on milling machines to make slittingor cutting through metal, or the cutting of deep narrow slots. |
| TOOLS AND CUTTERS |
SLOTTING DRILL |
Short, straight flute drill made without a point. It ismore of a milling cutter than a drill. |
| TOOLS AND CUTTERS |
SMOOTH FILE |
Type of file having a grade of cut between a second cutand a dead smooth. The number of teeth per inch varies considerably for different makes, sizes and shapes, but a smooth file 12″ long hasabout 50 to 60 teeth/inch. |
| TOOLS AND CUTTERS |
SOFT HAMMER |
A hammer, the head of which is made of copper, lead,raw hide or plastic to avoid any damage to the finished surfaces of work-pieces or machine parts. |
| TOOLS AND CUTTERS |
SOLDERING IRON |
Tool used during a soldering operation to heat thesolder and the parts to be joined. |
| TOOLS AND CUTTERS |
SPACING DEVICE (for centre punch) |
Simple device which can be fittedto an automatic centre punch to enable light punch marks or dots tobe spaced out at regular distances along a scribed line. |
| TOOLS AND CUTTERS |
SPANNER |
Lever tool, also called a wrench, employed for tightening andloosening nuts, bolts, screws etc. |
| TOOLS AND CUTTERS |
SPANNER WRENCH |
A type of wrench having a hook or equipped withpins for tightening or loosening threaded circular collars which haveeither slots or holes to receive the hook or pins on the wrench. |
| TOOLS AND CUTTERS |
SPIRAL MILL |
Milling cutter with the cutting teeth in the form of a spiralor helix round its circumference. |
| TOOLS AND CUTTERS |
SPOT FACING TOOL |
is similar to the counterbore and is used primarily for producing a shallow, annular, finished surface to mate with a locking washer or the head of a bolt or nut. |
| TOOLS AND CUTTERS |
SQUARE |
The name of tools of various designs and types used for layingout, inspecting, and testing the squareness of workpieces. Also, linesor surfaces which meet at right angles. |
| TOOLS AND CUTTERS |
SQUARE FILE |
Type of file with square section throughout its length,made in two forms taper (or slim) and parallel (or blunt). |
| TOOLS AND CUTTERS |
SQUARE NOSE TOOL |
A single point end cutting tool usually ground with the end cutting edge at approximately 90° to the axis of the point.Used for chamfering or for rough cuts on flat surfaces where sharpcorners are necessary. Also, used for finishing cuts on cast
iron. |
| TOOLS AND CUTTERS |
STAGGER TOOTH CUTTERS |
Side milling cutters in which the teethhaving alternating helix and the drag ends are eliminated to providemore chip clearance. |
| TOOLS AND CUTTERS |
STOCK AND DIE |
Tool used for cutting external threads on cylindricalbars etc. The stock is the name given to the portion of the tool (handholder) into which the dies are placed and which enables the dies to berotated without undue effort. The assembled unit
is called die and stock. |
| TOOLS AND CUTTERS |
STRADDLE MILL |
Term used when two or more milling cutters arefitted on the arbor with spacing collars between them. |
| TOOLS AND CUTTERS |
STRAIGHT REAMER |
is a cutting tool used to finish or semifinish thesurface of a cylindrical hole. |
| TOOLS AND CUTTERS |
STRAIGHT SHANK DRILL |
Twist drill having a shank that is straightrather than tapered and held in a self centering drill chuck for driving. |
| TOOLS AND CUTTERS |
SURFACE PLATE |
Metal plate with an optically flat surface which is usedas a plane of reference. |
| TOOLS AND CUTTERS |
SWAGE BLOCK |
Tool, made either in cast iron or steel and weighingroughly 75 kgs, used for shaping and finishing of forgings of a variety of cross sections. |
| TOOLS AND CUTTERS |
SWAN NECK TOOL |
Cranked tool for finishing slender work in a lathe. |
| TOOLS AND CUTTERS |
SWISS FILE |
Class of fine file used on light accurate work. |
| TOOLS AND CUTTERS |
TANG |
Two opposite flats milled at the end of taper shanks which enter aslot in the spindle to prevent slipping and provide a means of removingthe shank from the spindle. Also the name of the part of a file that fitsinto the handle. |
| TOOLS AND CUTTERS |
TAP |
A hardened and tempered steel tool for cutting internal threads whichhas flutes lengthwise to provide cutting edges for the threads and asquare at the end of the shank for turning the tap with a wrench. |
| TOOLS AND CUTTERS |
TAP DRILL |
A twist drill, the size of which will produce a hole that can betapped with a specified tap to give a thread of required depth orpercentage of full depth. |
| TOOLS AND CUTTERS |
TAP EXTRACTOR |
A tool or device for removing broken taps fromholes. Prongs extend down into the flutes of the broken portion. By attaching a wrench to the extractor, the broken part in the hole may be loosened and backed out. |
| TOOLS AND CUTTERS |
TAP GROOVING CUTTER |
Relieved milling cutter having a contourspecially designed for cutting the grooves or flutes in a tap. |
| TOOLS AND CUTTERS |
TAPER PIN REAMER |
Reamer employed to open out a drilled Ahole sothat a standard taper pin can be fitted. |
| TOOLS AND CUTTERS |
TAPER TAP |
is used to machine an internal taper thread such as a pipethread. It is chamfered at its small end for a distance equal to 4 or 5times the distance between threads. |
| TOOLS AND CUTTERS |
TAP WRENCH |
Tool which grips the square ended shank of a tap andenables it to be worked through a hole in hand tapping. |
| TOOLS AND CUTTERS |
TEE SLOT MILL |
Milling cutter used for cutting the cross groove of a Teeslot. |
| TOOLS AND CUTTERS |
TOOL BIT |
Small section of high speed steel, suitably ground, and held ina tool holder. |
| TOOLS AND CUTTERS |
TOOL MAKERS FILE |
File which in width and thickness is smaller thanan ordinary file generally obtainable in sizes from 2 to 12 inch inlength. |
| TOOLS AND CUTTERS |
TOOL MAKERS FLAT |
Extremely accurate surface plate used by toolmakers. |
| TOOLS AND CUTTERS |
TRAMMEL |
Instrument mainly used for marking out arcs of circles toolarge in diameter to permit the use of dividers. |
| TOOLS AND CUTTERS |
TREPANNING TOOL |
A tool holding device designed to hold a cuttingtool bit. This device is rotated in a drilling machine to cut out largecircles or holes from solid metal by cutting a narrow groove aroundthe metal. |
| TOOLS AND CUTTERS |
TRIANGULAR FILE |
ile having a section shaped like an equilateral triangle,usually known as a three square file. |
| TOOLS AND CUTTERS |
TRIMMING DIE |
Tool used to remove the surplus material from theedge of an article. |
| TOOLS AND CUTTERS |
TROWEL |
Tool most frequently used by moulders and core makers in theexecution of their work. |
| TOOLS AND CUTTERS |
TRY SQUARE |
Adjacent surfaces of an object, whether they are at rightangles or not is tested with the trysquare. |
| TOOLS AND CUTTERS |
T SLOT CUTTER |
A one piece, T shaped cutter which has a narrow neck connecting the cutter to the shank, the diameter and width of the cutter being standard for each number of T slot to suit bolts of various sizes. |
| TOOLS AND CUTTERS |
TURNING TOOL |
Tool of hardened material, suitably ground, for thepurpose of forming cylindrical or tapered work in a lathe. |
| TOOLS AND CUTTERS |
TWIST DRILL |
Drill with spiral flutes around its circumference. Theseflutes leading from the cutting faces, called lips, provide an exit for themetal that is removed when the hole is being drilled. |
| TOOLS AND CUTTERS |
TWO LIP END MILL |
A type of end milling cutter having two cuttingedges or lips in which the flutes may be straight or helical. Used forthe fast removal of metal when slots or keyways are to be cut on themilling machine. |
| TOOLS AND CUTTERS |
UNIVERSAL SQUARE |
Tool used to find the centre of a circle withoutthe use of other marking out instruments. |
| TOOLS AND CUTTERS |
VEE BLOCK AND CLAMP |
are used for holding circular bars for centering,drilling etc. |
| TOOLS AND CUTTERS |
VIXEN FILE |
A flat file with curved teeth which is largely used for filingsoft metals. |
| TOOLS AND CUTTERS |
WARDING FILE |
Small file, usually about four to six inches long, havinga rectangular section, used by locksmiths when filing keys to fit the wards of a lock or for filing the actual wards. |
| TOOLS AND CUTTERS |
WASHER CUTTER |
Tool designed to cut washers, or round discs, with or without holes in their centers, from sheet metal. |
| TOOLS AND CUTTERS |
WHEEL (grinding) |
Power driven wheel consisting of abrasive particles,held together by artificial or natural, mineral, metal or organic bonds. |
| TOOLS AND CUTTERS |
WHEEL DRESSER |
A tool or device used for dressing the face of grinding wheels. |
| TOOLS AND CUTTERS |
WIRECUTTER |
Tool used to cut wire and small diameter rod. |
| TOOLS AND CUTTERS |
WOODRUFF KEYWAY MILL |
Milling cutter for cutting standard woodruff keyways. |
| INSTRUMENTS AND GAUGES |
ACME THREAD GAUGE |
A gauge used for checking and testing the 29°angle and the width at the end of a thread cutting tool while grinding it.It is also used for setting the tool square with the axis of the workpiece. |
| INSTRUMENTS AND GAUGES |
ANGLE PLATES |
Some work has to be set at a particular angle to thesurface of the table, and this is often effected by bolting it to anadjustable angle plate. |
| INSTRUMENTS AND GAUGES |
ARDOMETER |
A type of total radiation pyrometer. |
| INSTRUMENTS AND GAUGES |
BORING BAR MICROMETER |
On boring operations, it is oftennecessary to adjust the cutter setting by a few thousandths of an inch. With this, it is possible to determine exactly the depth of cut taken. |
| INSTRUMENTS AND GAUGES |
CALIPER |
Instrument used for measuring distances between or oversurfaces, or for comparing dimensions of workpiece with such standardsas plug gauges, graduated rules etc. |
| INSTRUMENTS AND GAUGES |
CENTRE SQUARE |
is intended for marking the centres of round or squarestock. |
| INSTRUMENTS AND GAUGES |
CLINOMETER |
Instrument used for measuring angles relative to thehorizontal plane. |
| INSTRUMENTS AND GAUGES |
DEPTH GAUGE |
Gauge used for the purpose of measuring the distancebetween two surfaces, to find or check the depth of a counterboredhole, a recess etc. |
| INSTRUMENTS AND GAUGES |
DIAL GAUGE |
Instrument indicating the movement of a projectingplunger by the movement of a hand or pointer over a graduated dial. |
| INSTRUMENTS AND GAUGES |
DIAL SHEET GAUGE |
Gauge fitted with a dial or clock for measuring orcomparing the thickness of sheet metal plates. |
| INSTRUMENTS AND GAUGES |
DIVIDERS |
These are essentially scribers for marking arcs, and circles,hence their points are hard and sharp. They are used for dividing distancesinto a number of equal parts. Also used for transferring dimensionsfrom a rule to the work. |
| INSTRUMENTS AND GAUGES |
DRILL GAUGE |
Tool for measuring the size of drills. |
| INSTRUMENTS AND GAUGES |
DRILL GRINDING GAUGE |
A tool for checking the angle and lengthof the cutting lips on a twist drill while grinding it. Also it may becalled a drill point gauge or a drill angle gauge. |
| INSTRUMENTS AND GAUGES |
ENGINEERS TAPERS |
are intended for measuring hole sizes, slot widths,caliper settings and so on. |
| INSTRUMENTS AND GAUGES |
FEELER GAUGES |
Consist of a number of thin metal blades, each of adifferent thickness and in the desired number of dimensional steps.They are used for checking clearances. |
| INSTRUMENTS AND GAUGES |
FIRTHS HARDOMETER |
Instrument for measuring the hardness of materials, particularly metals. |
| INSTRUMENTS AND GAUGES |
GAUGE |
A tool or instrument for checking or measuring the sizes of metal parts to determine whether the dimensions are within thespecified limits. |
| INSTRUMENTS AND GAUGES |
GAUGE BLOCKS |
are used mostly for reference in setting gauges and foraccurate measurement in tool, gauge, and die manufacture. |
| INSTRUMENTS AND GAUGES |
HEIGHT GAUGE |
Marking out or measuring tool designed on the linesof a scribing block, but capable of more accurate duty. |
| INSTRUMENTS AND GAUGES |
HERMOPHRODITE CALIPER |
A caliper having one leg similar to thatof an inside caliper, while the other leg is pointed like a divider leg. |
| INSTRUMENTS AND GAUGES |
HOOK RULE |
A steel rule with a projecting piece or hook at one end atright angles to the edge of the rule. |
| INSTRUMENTS AND GAUGES |
INDICATING INSTRUMENTS |
The instruments that provide visualobservation of readings, such as pressure gauges, draft gauges, fuel oilmeters and thermometers for fuel, feed water and flue gas temperaturesetc. |
| INSTRUMENTS AND GAUGES |
INDICATOR |
A sensitive instrument which shows slight variations whentesting the trueness, or alignment of a workpiece, fixture or machinepart such as a milling vice. Dial indicators may be graduated to readsmall linear variations. |
| INSTRUMENTS AND GAUGES |
INSIDE VERNIER CALIPER |
is intended mainly for checking internaldimensions, such as the diameter of bores, and so on. Vernier protractoris used for measuring angles accurately. |
| INSTRUMENTS AND GAUGES |
JO BLOCKS |
These refer to Johansson precision gauge blocks. |
| INSTRUMENTS AND GAUGES |
KNIFE EDGE VERNIER CALIPER |
has jaws which are reduced to a very narrow edge. These are useful for measuring in restricted places or oncurved surfaces. |
| INSTRUMENTS AND GAUGES |
LEVEL,HYDROSTATIC |
Utube device employed during the levellingand setting of work too long for the use of a spirit level. |
| INSTRUMENTS AND GAUGES |
LEVEL, SPIRIT |
Instrument consisting essentially of a small sealed glasstube containing spirit (alcohol or ether) so mounted that the enclosedbubble of air occupies a central position only when the instrument isplaced horizontally. |
| INSTRUMENTS AND GAUGES |
LIMIT GAUGE |
A gauge that represents a limiting (maximum andminimum) size within which the work will be acceptable. |
| INSTRUMENTS AND GAUGES |
MICROMETER |
A precision, screw adjusted measuring instrument with which dimensions can be read in thousandths and ten thousandths of an inch. |
| INSTRUMENTS AND GAUGES |
MICROMETER COLLAR |
A dial on the screw of a machine to indicatethe extent of the movement of the screw or parts attached to the screw and usually graduated to read thousandths of an inch. |
| INSTRUMENTS AND GAUGES |
MICROMETER DEPTH GAUGE |
The ordinary depth gauge has beenelaborated by the addition of a micrometer head. |
| INSTRUMENTS AND GAUGES |
MINNIMETER |
Delicate form of indicator showing the movement of aprojecting plunger usually placed at one end. |
| INSTRUMENTS AND GAUGES |
ODD LEG |
Caliper having one leg bent inwards at its ends, like the twolegs on a pair of inside calipers, the other leg being pointed or havinga separate hardened point attached to it. |
| INSTRUMENTS AND GAUGES |
OPTICAL FLAT |
Plate generally made of glass or quartz and used as astandard of reference as a flat surface. |
| INSTRUMENTS AND GAUGES |
OPTICAL PROTRACTOR |
Angle measuring instrument fitted with ascale read by an optical magnifying device. |
| INSTRUMENTS AND GAUGES |
PARALLEL BLOCK |
Steel or cast iron block used when setting up work for machining, marking out or measuring. |
| INSTRUMENTS AND GAUGES |
PIN GAUGES |
End measuring pins for determining bore diameters. |
| INSTRUMENTS AND GAUGES |
PLUG GAUGE |
A gauge on which the outside measuring surfaces aredesigned to test the specified dimensions of holes. May be straight ortapered, plain or threaded, and of any cross-sectional shape. |
| INSTRUMENTS AND GAUGES |
PLUMB BOB |
Weight hung on the end of a cord so that when the latter issupported at its top end the cord will hang vertical. |
| INSTRUMENTS AND GAUGES |
PNEUMATIC MICROMETER |
An instrument designed to measure,among other things, the errors in the size, shape and alignment of bores, with compressed air. |
| INSTRUMENTS AND GAUGES |
PROTRACTOR |
Instrument graduated so as to enable the measurementof angles to be made in degrees. |
| INSTRUMENTS AND GAUGES |
PYROMETER |
Specified type of thermometer used to measure hightemperatures in the production and heat treatment of metals and alloys. |
| INSTRUMENTS AND GAUGES |
RADIUS GAUGE |
Tool used for checking the radius of small fillets orrounded corners. |
| INSTRUMENTS AND GAUGES |
RECORDING INSTRUMENTS |
Instruments which provide a permanentrecord of readings such as steam pressure, steam flow, air flow, flue gastemperature, feed water temperature, fuel flow and fuel temperature. |
| INSTRUMENTS AND GAUGES |
RING GAUGE |
A gauge in which the inside measuring surfaces are circularin form. A ring gauge may be cylindrical or conical, plain or threaded. |
| INSTRUMENTS AND GAUGES |
SCLEROSCOPE |
Instrument for measuring hardness. |
| INSTRUMENTS AND GAUGES |
SCREW GAUGE |
Type of gauge for checking the accuracy of a screw thread. |
| INSTRUMENTS AND GAUGES |
SCREW PITCH GAUGE |
A small tool with a number of blades, each havingthe same number of notches per inch as the thread it represents. It is used tofind the pitch and number of threads per inch on a screw, tap or die. |
| INSTRUMENTS AND GAUGES |
SCREW THREAD MICROMETER |
Type of micrometer with measuringpoints specially shaped to enable the measurement of pitch diameterand thickness of thread. |
| INSTRUMENTS AND GAUGES |
SCRIBER |
Used for making lines on the work when marking off. |
| INSTRUMENTS AND GAUGES |
SINE BAR |
Tool used for the accurate setting out of angles by arranging toconvert angular measurements to linear ones. |
| INSTRUMENTS AND GAUGES |
SLIP GAUGE |
Form of gauge made of hardened steel with two parallelfaces worked to high precision and at a known distance apart. |
| INSTRUMENTS AND GAUGES |
SNAP GAUGE |
A type of fixed gauge, plain or adjustable, arranged withinside measuring surfaces for checking diameters, lengths, thicknessesor widths of workpieces. |
| INSTRUMENTS AND GAUGES |
SPRING CALIPERS |
Inside or outside calipers for measuring workpiecesin which the tension against the nut is maintained by a circular springat the end. |
| INSTRUMENTS AND GAUGES |
STEEL RULE |
A thin flat measuring tool graduated in either fractional ordecimal part of an inch or cm and made in many styles and lengths. |
| INSTRUMENTS AND GAUGES |
STRAIGHT EDGE |
Strip of metal, usually steel, with one edge straight,used to determine the flatness of a surface. |
| INSTRUMENTS AND GAUGES |
SURFACE GAUGE |
Tool used for marking out and setting up work inconjunction with a surface plate, used also for levelling workpieces when fixing them to the worktables of machine tools e.g.,planers,shapers, millers etc. |
| INSTRUMENTS AND GAUGES |
TAPER PLUG GAUGE |
A solid internal gauge in the form of a frustrumof a cone having diameter, taper and length suitable for measuring thedimensions of an internal taper of specified size. |
| INSTRUMENTS AND GAUGES |
TAPER RING GAUGE |
An external gauge, the internal diameter of whichconfirms to the frustrum of a cone having diameter, taper and lengthsuitable for measuring the dimensions of an external taper of specifiedsize. |
| INSTRUMENTS AND GAUGES |
TEMPLATE |
A flat pattern or guide plate usually made from sheet metaland used as a gauge or guide when laying out, drilling, forming in amachine or filing irregular shapes on metal workpieces. |
| INSTRUMENTS AND GAUGES |
TELESCOPING GAUGES |
Adjustable gauges which consists of a handleattached to a fixed contact within which a plunger contact expands ortelescopes under spring tension when the gauge is inserted into thehole that is to be measured. |
| INSTRUMENTS AND GAUGES |
THREAD GAUGE |
Tool for checking the form and pitch of screw threads. |
| INSTRUMENTS AND GAUGES |
TOOL MAKERS MICROSCOPE |
Instrument used in accurate inspectionof thread forms, form tools and complex contours. |
| INSTRUMENTS AND GAUGES |
TORQUE METER |
Torsion measuring device fitted to a rotating shaft orcomponent to measure the torque developed at any given momentunder actual running conditions. |
| INSTRUMENTS AND GAUGES |
TORSIOGRAPH |
Instrument used to measure and record the amplitudeand frequency of torsional vibrations in a rotating shaft or other part. |
| INSTRUMENTS AND GAUGES |
TRAMMELS |
are generally used for laying off and checking dimensions of several feet, they are generally used in conjunction with a large steelrule, which may be from 3 to 10 ft long. |
| INSTRUMENTS AND GAUGES |
TRANSFER CALIPER |
A caliper designed to take measurement in recessesor over a projection. One leg can be separated or opened to removethe caliper and then returned to the measured size. |
| INSTRUMENTS AND GAUGES |
TRY SQUARE |
Instrument used for setting and checking a line, an edge ora face which is required to be at right angles to some other plane whichshould be regarded as a datum or reference plane. |
| INSTRUMENTS AND GAUGES |
VACUUM GAUGE |
Gauge used to measure the amount of vacuum in any vessel in which a pressure lower than atmospheric pressure is producedby evacuation of air, vapour and gas. |
| INSTRUMENTS AND GAUGES |
VERNIER |
Small-scale, for making accurate measurement, carrying a certainnumber of graduations equalling in their combined length a differentnumber of graduations, usually one more or one less, on the mainscale of the instrument to which the vernier is
attached. |
| INSTRUMENTS AND GAUGES |
VERNIER CALIPER |
Precision measuring instrument consisting of a beamor rule having a fixed jaw at one end, and a straight jaw to which isattached a vernier scale. |
| INSTRUMENTS AND GAUGES |
WATER GAUGE |
A gauge that shows the proper water level which mustbe maintained in a boiler to avoid overheating damage. |
| INSTRUMENTS AND GAUGES |
WIRE GAUGE |
Sizes of standard wire and sheet metal are normally expressednot by a dimension in cm, but by a number or gauge size. |
| INSTRUMENTS AND GAUGES |
WHITWORTH GAUGE |
Type of plug, and caliper gauge introduced by Joseph Whitworth. |
| INSTRUMENTS AND GAUGES |
WICKMAN GAUGE |
Special form of adjustable snap or horse shoe typeof gap gauge. |
| CASTING |
AERATOR |
A device for fluffing (or decreasing the density of) and coolingthe sand by the admixture of air. |
| CASTING |
AIR GATE |
A vertical channel for the removal of gases from the mould;checking of the filling of the mould cavity with metal and feeding upthe casting with metal during solidification. |
| CASTING |
AIR HOLE |
Hole in a casting caused by air or gas trapped in the metalduring solidification. |
| CASTING |
AIRLESS BLAST CLEANING |
A process whereby the abrasive material isapplied to the object being cleaned by centrifugal force generated by arotating vane type wheel. |
| CASTING |
ANTIPIPING (material) |
Usually refers to an insulating material placedon the top of a sprue or riser that keeps the metal in liquid or semiliquidform for a long period of time and minimizes the formation of theusual conical pipe or shrink in the top of a sprue or riser. |
| CASTING |
ARBOR |
A metal barrel, frame, or plate to support or carry part of a mouldor core. |
| CASTING |
ATMOSPHERIC RISER |
Blind riser which employs atmospheric pressureto aid feeding. |
| CASTING |
BACK DRAFT |
Taper or draft which prevents removal of pattern from themould. |
| CASTING |
BACKING SAND |
Sand between the facing sand and the flask. |
| CASTING |
BAKED CORE |
The core which has been subjected to heating or bakinguntil it is thoroughly dry, as opposed to green sand core which is usedin the moist state. |
| CASTING |
BASIN |
A cavity on top of the cope into which molten metal is pouredbefore it enters the sprue. |
| CASTING |
BEDDED IN MOULD |
is the mould, the bottom half of which is madein the sand in the floor of the foundry. It may be covered with a cope,or cast open, according to the type of work. |
| CASTING |
BINDER |
Material used to hold the grains of sand together in moulds orcores. May be cereal, oil, clay, resin, pitch etc. |
| CASTING |
BINDER |
PLASTIC (resin), Synthetic resin material used to hold grainsof sand together in moulds or cores, may be phenol formaldehyde orurea formaldehyde thermosetting types. |
| CASTING |
BLACKING |
Carbonaceous material for coating mould or core surfaces. |
| CASTING |
BLACK LEAD |
Graphite for facing moulds and cores. |
| CASTING |
BLAST CLEANING |
Removal of sand or oxide scale from castings by theimpinging action of sand, metal shot or grit projected under air, wateror centrifugal pressure. |
| CASTING |
BLEED |
Molten metal oozing out of a casting stripped or removed fromthe mould before solidification. |
| CASTING |
BLENDED SAND |
Mixture of sands of different grain sizes, clay contentetc. to produce one, possessing characteristics more suitable for foundry use. |
| CASTING |
BLIND RISER |
An internal riser which does not reach to the exterior of the mould. |
| CASTING |
BLISTER |
Defect on the surface of a casting appearing as a shallow blow with a thin film of metal over it. |
| CASTING |
BLOWN CASTINGS |
Castings in which bubbles, or blowholes, have beencaused through gases, steam etc., generated when the mould is cast,finding their way into the metal. |
| CASTING |
BOND CLAY |
Any clay suitable for use as a bonding material in themoulding sand. |
| CASTING |
BORIC ACID |
Inhibitor used in facing sand for magnesium base andaluminium base alloys high in magnesium to prevent reaction withmoisture in the sand. |
| CASTING |
BORON TRICHLORIDE |
A product used for degasification of aluminiumalloys. |
| CASTING |
BOSSES |
Bosses are often located on a wall of a casting and should be sodesigned that a heavy section of metal leads to the riser. |
| CASTING |
BOT |
Clay wedge used in a cupola to stop the hole through which themetal is run. |
| CASTING |
BUCKLE |
Defect in a casting surface appearing as an indentation resultingfrom an expansion scab. |
| CASTING |
BURN ON |
Adhesion of sand to the casting, usually due to the metalpenetrating into the sand. |
| CASTING |
BURN OUT |
Usually refers to the removal of the disposable wax or plasticpattern in the investment moulding process by heating the mouldgradually to a sufficiently high temperature to consume any carbonaceous residues. |
| CASTING |
BUTT RAMMAR |
The flat end of the molders rammer. |
| CASTING |
CALCIUM BORIDE |
An alloy of calcium and boron corresponding (whenpure) to the formula CaB6 containing about 61% boron and 39%calcium, and used in deoxidation and degasification of nonferrous metalsand alloys. |
| CASTING |
CALCIUM MANGANESE SILICON |
An alloy containing 17 to 19%calcium, 8 to 10% manganese, 55 to 60% silicon and 10 to 14% ironused as a scavenger for oxides, gases and nonmetallic impurities in steel. |
| CASTING |
CALCIUM SILICON |
An alloy of calcium, silicon and iron containing28 to 30% calcium, 60-65% silicon and 6% max iron, used as adeoxidizer and degasifier for steel and cast iron. |
| CASTING |
CASTING |
Metal poured into a mould to form an object. Act of pouringmolten metal into a mould. |
| CASTING |
CASTING STRAINS |
Strains resulting from internal stresses created duringcooling of a casting. |
| CASTING |
CAVITY, MOULD or DIE |
Impression or impressions in a mould or diethat give the casting its shape. |
| CASTING |
CENTRIFUGAL CASTING |
Process of filling moulds by pouring themetal into a sand or metal mould revolving about either its horizontalor vertical axis and continue pouring the metal into the mould that isbeing revolved before solidification of metal is complete. Molten
metalis moved from the center to the periphery by centrifugal action. |
| CASTING |
CERAMIC MOULD |
Mould in which the refractory and binder are suchthat when fired at high temperature, a rigid structure is formed. Themould can be made in a flask or in the form of a shell. |
| CASTING |
CEREAL |
Substance derived from corn flour, which is added to core andmoulding sands to improve their properties for casting production. |
| CASTING |
CHALK TEST |
Method of crack detection which consists of applying apenetrating liquid to the excess from the surface which is then coated with whiting or chalk. After a short time, the penetrant seeps out of thecracks into the whiting, causing an appreciable
difference in whiteness. |
| CASTING |
CHAMOTTE |
Coarsely graded refractory material prepared from calcinedclay and ground firebrick mulled with raw clay, used in steel foundries. |
| CASTING |
CHAPLET |
A metallic insert or support to hold the core in position in themould. |
| CASTING |
CHEEK |
Intermediate sections of a flask inserted between cope and drag. |
| CASTING |
CHILL |
A metal object placed on the outside or inside a mould cavity toinduce more rapid cooling at that point and thereby produce hard zone i.e., hard, unmachinable surface. |
| CASTING |
CHILL TEST |
Method of determining the suitability of a gray iron forspecific castings through its chilling tendency, as measured from the tipof a wedge shaped test bar. |
| CASTING |
CHILLED IRON |
Cast iron poured against a chill to produce a hardunmachinable surface. |
| CASTING |
CHOKE |
Restriction in a gating system to control the flow of metal beyondthat point. |
| CASTING |
CHVORINOV’S RULE |
Solidification time is proportional to the squareof the volume of the metal and inversely proportional to the square of the surface area. |
| CASTING |
CLEANING |
Process of removing sand, surface blemishes etc. from theexterior and interior surfaces of a casting. Includes degating, tumbling,or abrasive blasting, grinding off gate stubs. |
| CASTING |
COD |
A sand projection left behind in the mould by some patterns. Strictly speaking it is a core. |
| CASTING |
COLD SHUT |
Where two streams of metal do not unite thoroughly in acasting. |
| CASTING |
COMBINATION DIE |
A die casting die having two or more cavities of dissimilar parts. |
| CASTING |
CONTRACTION |
Act or process of a casting becoming smaller in volumeand/or dimensions during the solidification of the metal or alloy whichcomposes the casting. |
| CASTING |
COPE |
The upper or top most section of a flask, mould or pattern |
| CASTING |
COPE (false) |
A temporary cope which is used only to establish the partingline. |
| CASTING |
CORE |
Separable part of the mould, usually made of sand and generally baked, to create openings and various shaped cavities in the castings. Also used to designate the interior portion of an iron base alloy whichafter case hardening is substantially
softer than the surface layer or case. |
| CASTING |
CORE BINDER |
Any material used to hold the grains of core sand together. |
| CASTING |
CORE BOX |
Box with an opening in which the core is formed. |
| CASTING |
CORE PRINT |
An extension of the pattern for locating the core or anextension of the mould cavity for locating the core. |
| CASTING |
CORE (ram up) |
Core attached to the pattern and rammed up in themould, where it remains when the pattern is withdrawn. |
| CASTING |
CORE SHIFT |
Defect resulting from movement of the core from its properposition in the mould cavity. |
| CASTING |
CORE VENTS |
A wax product, round or oval in form, used to form thevent passage in the core. |
| CASTING |
CRUSH |
Casting defect appearing as an indentation in the surface due todisplacement of sand in the mould, usually at the joint surfaces. |
| CASTING |
CUTS |
Defects in castings resulting from erosion of the sand by the moltenmetal pouring over the mould or core surface. |
| CASTING |
DEGASSIFIER |
A material employed for removing gases from metals andalloys. |
| CASTING |
DEOXIDIZER |
A material used to remove oxygen or oxides from metalsand alloys. |
| CASTING |
DESULPHURIZER |
A material used to remove sulphur from moltenmetals and alloys. |
| CASTING |
DIE CASTING |
Pouring molten metal under pressure into metal moulds. |
| CASTING |
DIRECTIONAL SOLIDIFICATION |
It refers to the solidification whichproceeds along a cast member in the direction of the hotter metal. |
| CASTING |
DIRT |
Any extraneous material entering a mould cavity and usually forminga blemish on the casting surface. |
| CASTING |
DRAFT |
Taper allowed on the vertical faces of a pattern to permit removalof it from the sand mould without excessive rapping or tearing of themould walls. |
| CASTING |
DRAG |
The lower or bottom section of a mould or pattern. |
| CASTING |
DRY SAND MOULD |
A mould made of prepared moulding sand driedthoroughly before being filled with metal. |
| CASTING |
EROSION SCAB |
Casting defect occurring where the metal has beenagitated, boiled, or has partially eroded away the sand, leaving a solidmass of sand and metal at that particular spot. |
| CASTING |
EXPENDABLE PATTERN |
In investment moulding, the wax or plasticpattern that is left in the mould and later melted and burned out. |
| CASTING |
EXPANSION SCABS |
Rough thin layers of metal partially separated fromthe body of the casting by a thin layer of sand and held in place by athin vein of metal. |
| CASTING |
EXTERNAL CHILLS |
Various materials of high heat capacity such asmetals, graphite etc. forming parts of walls of the mould cavity topromote rapid heat extraction from molten metal. |
| CASTING |
EXTERNAL PRESSURE CASTINGS |
In this process, highly fluid metalis forced under considerable external pressure into metal moulds, thepressure being maintained until solidification is complete. |
| CASTING |
FACING SAND |
Specially prepared sand in the mould adjacent to thepattern to produce a smooth casting surface. |
| CASTING |
FALSE CHEEK |
A cheek used in making a three part mould in a two partmould. |
| CASTING |
FALSE ODDSIDE |
Permanent oddside made of plaster or other material. |
| CASTING |
FEED HEAD |
A reservoir of molten metal provided to compensate forcontraction of metal as it solidifies, by the feeding down of liquid metalto prevent voids. Also called a RISER. |
| CASTING |
FILLETS |
Properly positioned fillets materially increase the strength andsoundness of the castings. They reduce shrinkage cracks and erosion of sand at sharp intersections. |
| CASTING |
FIN |
A thin piece of metal projecting from a casting at the parting line or atthe junction of the cores or of cores and mould etc. |
| CASTING |
FLASH |
Thin fin or web of metal extending from the casting along the joint line as a result of poor contact between cope and drag moulds. |
| CASTING |
FLASK |
Container in which a mould is made. |
| CASTING |
FLOW OFF GATE |
Channel cut from the mould to the riser. |
| CASTING |
FLUORESCENT CRACK DETECTION |
Application of fluorescentliquid to a part, then removing the excess from the surface, which isthen exposed to ultraviolet light. Cracks show up as fluorescent lines. |
| CASTING |
GAS HOLES |
Rounded cavities caused by generation or accumulation of gas or entrapped air in a casting, holes may be spherical, flattened orelongated. |
| CASTING |
GATE |
The location where the molten metal enters the casting cavity. |
| CASTING |
GATED PATTERN |
One or more patterns with gating systems attached. |
| CASTING |
GATING SYSTEM |
Combination of channels, cavities and other elementsof a casting mould which are intended ·to feed molten metal into amould, fill in the latter, and feed up the casting with metal duringsolidification. |
| CASTING |
GRAVITY DIE CASTING |
is one in which the fluid metal is poured by hand into the metal moulds and around metal cores. The only pressureapplied is that exerted by the head of metal in the pouring gate. |
| CASTING |
GREEN SAND |
Prepared moulding sand in the moist or as mixedcondition. |
| CASTING |
GREEN SAND MOULD |
Mould made and cast in damp sand. |
| CASTING |
GUIDE PIN |
The pin used to locate the cope in the proper place on thedrag. |
| CASTING |
HORN GATE |
A curved gate in the shape of a horn arranged to permitentry of molten metal at the bottom of the casting cavity. |
| CASTING |
HOT TEARS |
Cracks in castings formed at elevated temperatures, usually by contraction stresses. |
| CASTING |
IMPRESSION |
Cavity in a die casting die or in a mould. |
| CASTING |
INCLUSIONS |
Particles of slag, sand or other impurities such as oxides,sulphides, silicates etc., trapped mechanically during solidification orformed by subsequent reaction of the solid metal. |
| CASTING |
IN GATE |
Channel out from the bottom of the runner into the mould. Itis used in cases where the runner does not enter the mould direct. |
| CASTING |
INJECTION |
Forcing molten metal into a die casting die. |
| CASTING |
INOCULATION |
Process of adding some material to molten metal in theladle for the purpose of controlling the structure to an extent not possibleby control of chemical analysis and other normal variables. |
| CASTING |
INSULATING SLEEVE |
Hollow cylinders or sleeves formed of gypsum,diatomaceous earth, pearlite, vermiculite etc., placed in the mould atsprue and riser locations to decrease heat loss and rate of solidificationof the metal contained in them. |
| CASTING |
INTERNAL CHILLS |
Solid pieces of metal or alloy, similar in compositionto the casting, placed in the mould prior to filling it with molten metal. |
| CASTING |
INVESTMENT MOULDING |
Moulding using a pattern of wax, plasticor other material which is invested or surrounded by a moulding mediumin slurry or liquid form. After the moulding medium has solidified,the pattern is removed by heating the mould, leaving a cavity forreception
of molten metal. Also called LOST WAX PROCESS orPRECISSION MOULDING. |
| CASTING |
LADLE |
Metal receptacle lined with refractory for transportation of moltenmetal. |
| CASTING |
LOAM |
A course, strongly bonded moulding sand used for loam and dry sand moulding. |
| CASTING |
LOAM MOULDING |
A system of moulding especially for large castings, wherein the supporting structure is constructed of brick. Coatings of loam are applied to form the mould face. |
| CASTING |
MAGNETIC CRACK DETECTION |
Method of locating cracks inmaterials which can be magnetized, done by applying magnetizing forceand applying finely divided iron powder which then collects in theregion of the crack. |
| CASTING |
MASTER PATTERN |
The pattern from which the working pattern iscast. |
| CASTING |
MATCH |
A form of wood, plaster of paris, sand, or other material on which an irregular pattern is laid or supported while the drag is beingrammed. |
| CASTING |
MATCH PLATE |
A metal or other plate on which patterns, split along theparting line, are mounted back to back with the gating system to forman integral piece. |
| CASTING |
METAL PENETRATION |
Defect in the casting surface which appears asif the metal has filled the voids between the sand grains withoutdisplacing them. |
| CASTING |
MOULD CAVITY |
Impression left in the sand mould by the pattern. Alsocalled MOULD. |
| CASTING |
MOULD CLAMPS |
Devices used to lock or hold cope and drag together. |
| CASTING |
MOULD HARDENER |
In sand moulds in which sodium silicate is thebinder, injection of CO2 causes a chemical reaction which results in arigid structure. |
| CASTING |
MOULD WASH |
Usually an aqueous emulsion containing various organicor inorganic compounds or both, which is used to coat the face of amould cavity. Materials include graphite, silica flour etc. |
| CASTING |
MOULDING SAND |
Mixture of sand and clay suitable for mould making. |
| CASTING |
MOULD WEIGHTS |
Weights placed on top of moulds to offset internaland ferrostatic pressure. |
| CASTING |
MOULDABILITY |
The ability of the sand mixture to fill in perfectly thecavity of a flask with a pattern or a corebox. |
| CASTING |
MULTIPLE MOULD |
Composite mould made up of stacked sections.Each section incorporates a complete gate for casting. All castings arepoured from a central downgate. |
| CASTING |
ODDSIDE |
Support used for supporting a pattern whilst the drag is beingrammed up. |
| CASTING |
OPEN SAND CASTING |
A casting poured in a mould which has no copeor other covering. |
| CASTING |
PARTING COMPOUND |
Material dusted or sprayed on a pattern ormould to prevent adherence of sand. |
| CASTING |
PATTERN |
Model of wood, metal, plaster or other material used in makinga mould. |
| CASTING |
PATTERN ALLOWANCES |
The dimensions on the pattern differ fromthose on the drawing to allow for metal shrinkage, distortion, core shift,draft and machine finish. Such allowances are made by the pattern-maker. |
| CASTING |
PEEN |
Small end of a moulders rammer. |
| CASTING |
PERMANENT MOULD |
A long life mould into which metal is pouredby gravity. |
| CASTING |
PILOT CASTING |
Usually the first casting made from a production patternand examined for dimensional accuracy, quality and other features beforethe pattern is placed on the line. |
| CASTING |
PIT MOULD |
Mould in which the lower portions are made in a suitablepit or excavation in a foundry floor. |
| CASTING |
PLASTER MOULDING |
Gypsum or plaster of paris is mixed with fibroustalc, with or without sand, and with water to form a slurry, that ispoured around a pattern. In a short period of time, the mass sets orhardens sufficiently to permit removal of the pattern. The
mould soformed is baked at elevated temperature to remove, all moisture priorto use. |
| CASTING |
PLASTICITY |
The ability of the sand mixture to acquire the outlines of apattern or corebox under the action of external forces and retain theshape acquired without destruction. |
| CASTING |
PLASTIC PATTERN |
Pattern made from any of the several thermosettingtype synthetic resins such as phenol formaldehyde, epoxy etc. Smallpatterns may be cast solid, but large ones are usually produced by laminating with glass cloth. |
| CASTING |
POURED SHORT |
Casting which lacks completeness due to the cavity not being filled with molten metal. |
| CASTING |
POURING CUP |
Part of the mould that receives the molten metal fromthe pouring ladle and transfers it further into the cavity of the mould. |
| CASTING |
PRINT |
Wooden projection put on to a pattern to provide supports for thecores in a mould. |
| CASTING |
PROGRESSIVE SOLIDIFICATION |
is the freezing of the metal fromthe mould metal inferface toward the center of the cavity. |
| CASTING |
PUSHUP |
An indentation in the casting surface due to displacement(expansion) of the sand in the mould. |
| CASTING |
RAMMER |
Tool used in a foundry for ramming the sand. |
| CASTING |
RAPPING |
Tapping of the pattern with a mallet in order to loosen it as itis drawn from the mould. |
| CASTING |
RAPPING BAR |
A pointed bar (or rod) made of steel or other metal, which is inserted vertically into a hole in a pattern or driven into it,then struck with a hammer on alternate sides to cause vibration andloosening of the pattern from the sand. |
| CASTING |
RELIEF SPRUE |
The second sprue at opposite end of the runner to relievepressure created during pouring operation. |
| CASTING |
RIBS |
are used primarily as stiffeners and reinforcing members. If properly designed and located in difficult castings, serve to check the possibility of hot tears or cracks during solidification. |
| CASTING |
RISER |
Reservoir of molten metal attached to the casting to compensatefor the internal contraction of the casting during solidification. |
| CASTING |
RUNNER |
The portion of the gate assembly which connects the downgateor sprue with the casting. |
| CASTING |
SAG |
Defect which appears as an increase or decrease in metal section due tosinking of sand in the cope (decreased section) or sagging in the core(increased section). |
| CASTING |
SAND BLAST |
Sand driven by a blast of compressed air (or steam). Usedto clean castings, to cut, polish or decorate glass and other hard substances. |
| CASTING |
SCAB |
A blemish on the casting caused by eruption of gas from the mouldface. |
| CASTING |
SEAM |
Surface defect on a casting similar to a cold shut, but not as severe. |
| CASTING |
SEMICENTRIFUGAL CASTING |
is one in which the mould, usually astacking of several flat sand or die moulds, is rotated about a verticalaxis. |
| CASTING |
SHOT |
Abrasive blast cleaning material. |
| CASTING |
SHRINKAGE ALLOWANCES |
are provided to take care of the contractionin dimensions of the solidified casting as it cools from its freezingtemperature to room temperature. |
| CASTING |
SHRINK HOLE |
A hole or cavity in a casting resulting from contractionand insufficient feed metal, and formed during the period the metalchanged from the liquid to the solid state. |
| CASTING |
SHELL MOULDING |
Process in which clay free silica sand coated with athermosetting resin or mixed with the resin is placed on a heated metalpattern for a short period of time to form a partially hardened shell. The unaffected sand mixture is removed for further
use. The patternand the shell are then heated further to harden or polymerize the resinsand mix, and the shell is removed from the pattern. |
| CASTING |
SKIMMING GATE |
Part of the mould that retains non-metallic inclusionsor impurities and delivers sound metal further into the runners. |
| CASTING |
SLEEK |
Term meaning to make smooth. It is applied to the trowelling of a sand surface. |
| CASTING |
SLUSH CASTING |
Casting made by pouring an alloy into a metal mould,allowing it to remain sufficiently long to form a thin solid shell, andthen pouring out the remaining metal. |
| CASTING |
SNAG |
Removal of fins and rough places on a casting by means of grinding. |
| CASTING |
SNAP FLASK |
Moulding box, hinged on one side so that it may be openedto allow the finished mould to be removed. |
| CASTING |
SPRIGS |
Small pegs of wood or metal used to strengthen weak portions of a mould or to assist in the mending up of a damaged mould. |
| CASTING |
SPRUE |
The vertical portion of the gating system where the molten metalfirst enters the mould. |
| CASTING |
STACK MOULDING |
Moulding method in which the half mould formsthe cope and drag. They are placed on top of the other and mouldsstacked one overt he other are poured through a common sprue. |
| CASTING |
STRICKLE |
Piece of wood by means of which surplus sand is removedfrom a moulding box or other surface. They may also be used to shapesand surfaces into any required shape. |
| CASTING |
SURVIVABILITY |
The ability of a moulding mixture to retain its initialproperties for a specified length of time. |
| CASTING |
TRUE CENTRIFUGAL CASTING |
is used for producing thin or thick walled hollow cylinders with a bore concentric with the outside. |
| CASTING |
VENT |
Channel made in the sand in the vicinity of a mould to allow steam, gases etc., generated when sand and molten metal come intocontact with one another, to escape. |
| CASTING |
VENT ROD |
A piece of wire or rod to form the vents i.e., holes in thesand, for the escape of gases. |
| CASTING |
VENT WAX |
Wax in rod shape placed in the core during manufacture. Inthe oven the wax is melted out leaving a vent or passage. |
| CASTING |
WASH |
Casting defect resulting from erosion of sand. Also refers coatingmaterials applied to moulds, cores etc. |
| CASTING |
WASTER |
Faulty casing. |
| CASTING |
WHIRL GATE |
Gating system in which the metal enters a circular reservoirat a tangent and so whirls around, leaving dirt and slag behind beforepassing into the mould cavity. |
| CASTING |
WHISTLERS |
Small openings from isolated mould cavities to allow gasesto escape easily. |
| CASTING |
YIELDABILITY |
The ability of the sand mixture to decrease in volume soas not to limit the contraction of a solidifying casting. |
| WELDING |
ARC |
A sustained electric discharge, where current flows through the gapbetween two electrodes. |
| WELDING |
ARC CUTTING |
Process which melts the metals to cut with the heat of an arc between an electrode and the base metal. |
| WELDING |
ARC EYE |
A burn on the exterior surface of the operators eye, due to itsexposure to an open arc. Also called FLASH EYE. |
| WELDING |
ARC GAP |
Distance between the tips of two electrodes, normally betweenan electrode and the workpiece. Also known as ARC LENGTH. |
| WELDING |
ARC PLASMA |
A gas that has been heated to an at least partially ionizedcondition, enabling it to conduct an electric current. |
| WELDING |
ARC SPOT WELD |
Spot welding made by an arc welding process. |
| WELDING |
ARC WELDING |
A group of welding processes which produces coalescenceof metals by heating them with an arc, with or without the applicationof pressure, and with or without the use of filler metal. |
| WELDING |
ATOMIC HYDROGEN WELDING |
An arc welding process whichproduces coalescence of metals by heating them with an electric arcmaintained between electrodes in an atmosphere of hydrogen.Shielding is provided by hydrogen. |
| WELDING |
AUTOGENOUS WELD |
A fusion weld made without the addition of filler metal. |
| WELDING |
AUTOMATIC OXYGEN CUTTING |
Cutting with an equipment withoutconstant observation and adjustment of the controls by an operator. |
| WELDING |
AUTOMATIC WELDING |
Welding which permits the operation withoutadjustment of controls by an operator. |
| WELDING |
BACKHAND WELDING |
A welding technique in which the weldingtorch or gun is directed opposite to the progress of welding. |
| WELDING |
BACK WELD |
A weld deposited at the back of a single groove weld. |
| WELDING |
BARE ELECTRODE |
A filler metal electrode of a single metal or alloy,produced into a wire, strip or bar form and without any coating orcovering on it. |
| WELDING |
BARE METAL ARC WELDING |
Process which produces coalescence of metals by heating them with an electric arc between a bare or lightly coated metal electrode and the work piece. |
| WELDING |
BASE METAL |
The metal to be welded, brazed, soldered or cut. |
| WELDING |
BLIND JOINT |
A joint, no portion of which is visible. |
| WELDING |
BORAX |
is the old standard flux for brazing, exists in two forms—ordinary borax and amorphous or fused borax. |
| WELDING |
BRAZING |
A group of welding processes that produces coalescence of materials by heating them to the brazing temperature, using a fillermetal having a liquidus above 450°C and below the solidus of the basemetal. |
| WELDING |
BUTT JOINT |
A joint between two members aligned approximately inthe same plane. |
| WELDING |
CARBON ARC CUTTING |
Cutting of base metals by melting them with theheat of an arc produced between a carbon electrode and the base metal. |
| WELDING |
CARBON ELECTRODE |
A non-filler metal electrode used in arc weldingor cutting, consisting of a carbon or graphite rod, which may be coated with copper or other coatings. |
| WELDING |
CARBON ARC WELDING |
A brazing process that produces coalescenceof metals by heating them with an electric arc produced between twocarbon electrodes. The filler material is distributed in the joint by capillary action. |
| WELDING |
COLD WELDING |
A solid state welding process in which pressure isapplied at room temperature to produce coalescence of metals withsubstantial deformation at the weld. |
| WELDING |
COMPOSITE ELECTRODE |
Multicomponent filler metal electrodes invarious physical forms such as standard wires, tubes and covered wire. |
| WELDING |
CONTINUOUS WELD |
A weld that extends continuously from one endof a joint to the other. |
| WELDING |
COVERED ELECTRODE |
An electrode consisting of a core of a bareelectrode or metal cored electrode to which a covering, sufficient toprovide a slag layer on the weld metal, has been applied. |
| WELDING |
COVER PLATE (eye protection) |
A removable pane of colourless glass,plastic coated glass or plastic that covers the filter plate and protects itfrom weld spatter, pitting or scratching when used in a helmet, hoodor goggles. |
| WELDING |
CRATER |
A depression at the termination of a weld bead. |
| WELDING |
DECARBURIZING FLAME |
A flame which removes carbon from themolten metal. |
| WELDING |
DEPOSITION EFFICIENCY (arc welding) |
Ratio of the weight of deposited metal to the net weight of the filler metal consumed, exclusiveof stubs i.e., left out electrode bits. |
| WELDING |
DEPTH OF FUSION |
Distance that fusion extends into the base metal orprevious pass from the surface melted during welding. |
| WELDING |
DIFFUSION WELDING |
A solid state welding process that producescoalescence of the faying surfaces by the application of pressure atelevated temperature. |
| WELDING |
EDGE JOINT |
A joint between the edges of two or more parallel or nearly parallel members. |
| WELDING |
ELECTROGAS WELDING |
Arc welding in which coalescence is effectedby heating the metals with an arc produced between a continuousfiller metal electrode and the work. Shielding is by inert gas. |
| WELDING |
ELECTRO SLAG WELDING |
A welding process producing coalescenceof metals with molten slag that melts the filler metal and the surfacesof the workpieces. The weld pool is shielded by slag. |
| WELDING |
EMISSIVE ELECTRODE |
A filler metal electrode consisting of a core of a bare electrode or a composite electrode to which a very light coatinghas been applied to produce a stable arc. |
| WELDING |
EXPLOSION WELDING |
A solid state welding process in whichcoalescence is effected by high velocity movement of the workpieces,produced by a controlled detonation. |
| WELDING |
FACE SHIELD (eye protection) |
Device positioned in front of the eyesand over all or a portion of the face to protect the eyes and face. |
| WELDING |
FILLET WELD |
A weld of approximately triangular cross-section joiningtwo surfaces approximately at right-angles to each other in a lap joint,T joint or corner joint. |
| WELDING |
FILLER METAL |
Metal to be added in making a welded, brazed or soldered joint. |
| WELDING |
FIRE CRACKER WELDING |
Shielded metal arc welding process in whicha length of covered electrode is placed along the joint in contact withthe workpieces. During welding, a stationary electrode is consumedas the arc travels the length of the electrode. |
| WELDING |
FISH EYE |
A discontinuity found on the fracture surface of a weld in steel.It consists of a small pore or inclusion surrounded by an approximately round bright area. |
| WELDING |
FLOW WELDING |
Process which produces coalescence of metals by heating them with molten filler metal poured over the surfaces to be welded until the welding temperature is attained and until sufficientfiller metal has been added. |
| WELDING |
FLUX |
Material used in welding to prevent, dissolve or facilitate removalof oxides and other undesirable surface substances. |
| WELDING |
FLUX CORED ARC WELDING |
Process in which coalescence of metalsis effected by heating them with an arc between a continuous fillermetal (consumable) electrode and the work. Shielding is by the fluxcontained within the tubular electrode. |
| WELDING |
FLUX CORED ELECTRODE |
A composite hollow filler metal electrodecontaining within it ingredients to provide such functions as shieldingatmosphere, deoxidation, arc stabilization and slag formation. |
| WELDING |
FOREHAND WELDING |
A welding technique in which the weldingtorch or gun is directed toward the progress of welding. |
| WELDING |
FORGE WELDING |
Process that produces coalescence of metals by heatingthem in air in a forge and by applying pressure or blows sufficient tocause permanent deformation at the surface. |
| WELDING |
FUSION |
Melting together of filler metal and base metal (substrate) or of base metal only which results in coalescence. |
| WELDING |
FUSION WELDING |
Arc welding process that uses fusion of the basemetal to make the weld. |
| WELDING |
FUSION ZONE |
Area of base metal melted as determined on the cross-section of a weld. |
| WELDING |
GAS METAL ARC CUTTING |
Process in which metals are severed by melting them with the heat of an arc produced between a continuousfiller metal electrode and the workpiece. Shielding is obtained entirely from an externally supplied gas. |
| WELDING |
GAS CARBON ARC WELDING |
Process which produces coalescence of metals by heating them with an electric arc between a carbon electrodeand the workpiece. Shielding is effected by a gas or gas mixture. |
| WELDING |
GAS METAL ARC WELDING |
Process that produces coalescence of metals by heating them with an arc between a continuous filler metalelectrode and the workpiece. Shielding is obtained by external gassupply. |
| WELDING |
GAS REGULATOR |
A device for controlling the delivery of gas at somesubstantially constant pressure. |
| WELDING |
GAS TUNGSTEN ARC CUTTING |
Process in which materials are severedby melting them with an arc produced by a tungsten electrode and the workpiece. Shielding is effected by a gas. |
| WELDING |
GAS TUNGSTEN ARC WELDING |
Process that produces coalescenceof metals by heating them with an arc produced between a tungsten(non-consumable) electrode and the workpiece. Shielding is obtainedfrom a gas. |
| WELDING |
GAS WELDING |
Process in which heat is furnished by a flame resultingfrom the combustion of a fuel gas, such as acetylene or hydrogen withoxygen; oxyacetylene being capable of producing the highesttemperature flame is the most used. |
| WELDING |
GLOBULAR TRANSFER |
Transfer of molten metal in large drops froma consumable electrode across the arc in arc welding. |
| WELDING |
GOUGING |
The forming of a bevel or groove by material removal. |
| WELDING |
HAND SHIELD |
A protective device, used in arc welding, for shieldingthe eyes, face and neck. A hand shield is equipped with a suitable filterplate and is designed to be held by hand. |
| WELDING |
HEAT AFFECTED ZONE |
The portion of the base metal that has notbeen melted, but whose mechanical properties or microstructure havebeen altered by the heat of welding, brazing, soldering or cutting. |
| WELDING |
HELMET (eye protection) |
Device designed to be worn on the head toprotect eyes, face and neck from arc radiation, radiated heat, spatter,or other harmful matter expelled during arc welding. |
| WELDING |
HOT PRESSURE WELDING |
Process that produces coalescence of metals with heat and application of pressure sufficient to produce macrodeformationof the base metal. Vacuum or other shielding media is used. |
| WELDING |
HOTWIRE WELDING |
Arc welding process in which a filler metal wireis resistance heated by current flowing through the wire as it is fedinto the weld pool. |
| WELDING |
INERT GAS |
A gas which does not normally combine chemically with thebase metal or filler metal. |
| WELDING |
INTERMITTENT WELD |
A weld in which the continuity is broken by recurring unwelded spaces. |
| WELDING |
JOINT |
Junction of members or the edges of members which are to be joined or have been joined. JOINT EFFICIENCY |
| WELDING |
KERF |
Width of the cut produced during a cutting process. |
| WELDING |
LAP JOINT |
A joint formed between two overlapping members in parallelplanes. |
| WELDING |
LASER BEAM CUTTING |
Process that severs materials by melting orvaporizing them with the heat obtained from a laser beam, with or without the application of gas jets to augment the removal of material. |
| WELDING |
LASER BEAM WELDING |
Process that produces coalescence of materials with the heat obtained from the application of a concentrated coherentlight beam impinging upon the joint. |
| WELDING |
LIGHTLY COATED ELECTRODE |
A filler metal electrode consistingof a metal wire with light coating applied subsequent to the drawingoperation, primarily for stabilizing the arc. |
| WELDING |
MACHINE OXYGEN CUTTING |
Cutting with an equipment thatperforms the operation under the constant observation and control of an oxygen cutting operator. |
| WELDING |
MACHINE WELDING |
Welding with an equipment which performs theoperation under the constant observation and control of a weldingoperator. |
| WELDING |
MANUAL WELDING |
Welding performed and controlled completely by hand. |
| WELDING |
MELTING POINT |
The temperature at which a metal melts. |
| WELDING |
MELTING RANGE |
Temperature range between solidus and liquidus. |
| WELDING |
MELTING RATE |
The weight or length of electrode melted in unit time. |
| WELDING |
METAL ARC CUTTING |
Processes that sever metals by melting them with the heat of an arc between a metal electrode and the base metal. |
| WELDING |
METAL BATH BRAZING |
is a dip process wherein the filler metal isobtained from the molten metal bath. This is confined to joiningcomparatively small work such as joints in wire. |
| WELDING |
METAL CORED ELECTRODE |
A composite filler metal electrodeconsisting of a metal tube or other hollow configuration containingalloying ingredients. |
| WELDING |
METAL ELECTRODE |
A filler or non-filler metal wire or rod, either bareor covered, used in an arc welding or cutting. |
| WELDING |
METAL POWDER CUTTING |
An oxygen cutting process that seversmetals through the use of powder such as iron, to facilitate cutting. |
| WELDING |
NEUTRAL FLAME |
An oxyfuel gas flame in which the proportion used isneither oxidizing nor reducing. |
| WELDING |
NON-DESTRUCTIVE TESTING |
Testing of welds or metal withoutcausing any damage to the item being tested. |
| WELDING |
OVER WELDING |
Depositing more filler metal than required. |
| WELDING |
OXYACETYLENE CUTTING |
Process that severs metals by the chemicalreaction of oxygen with the base metal at elevated temperatures causedby combustion of acetylene with oxygen. |
| WELDING |
OXYACETYLENE WELDING |
Process that produces coalescence of metalsby heating them with the flame obtained by combustion of acetylene with oxygen. |
| WELDING |
OXY FUEL CUTTING |
A group of cutting processes used to sever metalsby means of the chemical reaction of oxygen with the base metal atelevated temperatures produced by flames obtained from combustionof fuel gas and oxygen e.g., oxy hydrogen cutting, oxy natural
gas cutting,oxy propane cutting. |
| WELDING |
OXY FUEL GAS WELDING |
A group of welding processes that producescoalescence by heating materials with an oxyfuel gas flame or flames with or without the application of pressure and with or without theuse of filler metal e.g., oxy hydrogen welding. |
| WELDING |
OXYGEN LANCE CUTTING |
An oxygen cutting process used to severmetals with oxygen supplied through a consumable lance. The preheatto start cutting is obtained by other means. |
| WELDING |
PLASMA ARC CUTTING |
Process that severs metal by melting a localizedarea with a constricted arc and removing the molten material withhigh velocity jet of hot, ionized gas issuing from the constricted orifice. |
| WELDING |
PLASMA ARC WELDING |
Process that produces coalescence of metalsby heating them with a constricted arc between an electrode and the workpiece (transferred arc) or the electrode and the constricting nozzle(non-transferred arc). Shielding is obtained from the hot ionized
gasissuing from the orifice which may be supplemented by an auxiliary source of shielding gas. |
| WELDING |
PLUG WELD |
A weld made in a circular hole or one member of a joint,fusing that member to another member. |
| WELDING |
POROSITY |
Cavity type discontinuities formed by gas entrapment duringsolidification. |
| WELDING |
POST HEATING |
Application of heat to an assembly after a welding,brazing, soldering, thermal spraying or thermal cutting. |
| WELDING |
PRE HEATING |
Application of heat to the base metal immediately before welding, brazing, soldering, thermal spraying and cutting. |
| WELDING |
PRESSURE GAS WELDING |
An oxyfuel gas welding which producescoalescence simultaneously over the entire area of faying surfaces by heating them with gas flames obtained from combustion of a fuel gas with oxygen and by the application of pressure, without the use of filler
metal. |
| WELDING |
PROJECTION WELDING |
is a modification of spot welding in whichthe current and pressure are localized at the weld section by the use of embossed, machined, or coined projections on one or both pieces of the work. |
| WELDING |
PROTECTIVE ATMOSPHERE |
Gas or vacuum envelope surroundingthe workpieces used to prevent or facilitate removal of oxides anddetriment surface substances. |
| WELDING |
RANDOM INTERMITTENT WELDS |
Intermittent welds on one orboth sides of a joint in which the weld increments are made withoutregard to spacing. |
| WELDING |
PULSED POWER WELDING |
An arc welding process variation in whichthe power is cyclically programmed to pulse so that effective but shortduration values of a parameter can be utilized. Also called PULSEDVOLTAGE or PULSED CURRENT WELDING e.g., gas metal arc welding (pulsed
arc), gas tungsten arc welding (pulsed arc). |
| WELDING |
REDUCING ATMOSPHERE |
A chemically active protective atmosphere which at elevated temperature will reduce metal oxides to their metallicstate. |
| WELDING |
REDUCING FLAME |
A gas flame having a reducing effect owing to excessfuel gas. |
| WELDING |
RESIDUAL STRESS |
Stress present in a member that is free to externalforces or thermal gradients. |
| WELDING |
RESISTANCE BRAZING |
is an electric brazing process wherein the heatis obtained by passing an electric current through the parts being brazed. |
| WELDING |
RESISTANCE WELDING |
In this, the metal parts to be joined are heatedby their resistance to the flow of an electric current e.g., spot welding,seam welding. |
| WELDING |
ROLL WELDING |
A solid state welding process that produces coalescenceof metals by heating and by applying pressure with rolls sufficient tocause deformation at the faying surfaces. |
| WELDING |
SEAL WELD |
Any weld designed primarily to provide a specific degree of tightness against leakage. |
| WELDING |
SEAM WELD |
A continuous weld between or upon overlapping members,in which coalescence may start and occur on the faying surfaces, or may have proceeded from the outer surface of one member. |
| WELDING |
SEMI AUTOMATIC ARC WELDING |
Arc welding with equipmentthat controls only the filler metal feed. The advance of the welding ismanually controlled. |
| WELDING |
SEMI BLIND JOINT |
A joint in which one extremity of the joint is notvisible. |
| WELDING |
SERIES SUBMERGED ARC WELDING |
A submerged arc welding processvariation in which electric current is established between two consumableelectrodes which meet just above the surface of the workpieces whichare not part of the electric circuit. |
| WELDING |
SHIELDED CARBON ARC WELDING |
A carbon arc welding processin which shielding is effected by the combustion of a solid materialfed into the arc or from a blanket of flux on the workpieces or both. |
| WELDING |
SHIELDED METAL ARC CUTTING/WELDING |
Cutting or weldingeffected by heating the workpieces with an arc between a covered metalelectrode and the workpiece. Shielding is obtained from decompositionof the electrode covering, |
| WELDING |
SHIELDING GAS |
Protective gas used to prevent atmosphericcontamination. |
| WELDING |
SHORT CIRCUITING TRANSFER ARC WELDING |
Metal transferin which molten metal from a consumable electrode is deposited duringrepeated short circuits. |
| WELDING |
SHRINKAGE VOID |
A cavity type discontinuity normally formed by shrinkage during solidification. |
| WELDING |
SILVER BRAZING |
Brazing process that employs silver alloys. Also calledhard soldering or silver soldering. |
| WELDING |
SLAG INCLUSION |
Non-metallic material entrapped in weld metal orbetween weld metal and base metal. |
| WELDING |
SLOT WELD |
A weld made in an elongated hole in one member of a jointfusing that member to another member. The hole may be open at one end. |
| WELDING |
SOLDER |
A filler metal used in soldering which has a liquidus not exceeding450°C. |
| WELDING |
SOLDERING |
A group of welding processes that produces coalescence of materials by heating them to a suitable temperature and by using afiller metal having a liquidus not exceeding 450°C and below the solidusof the base metals. |
| WELDING |
SOLID STATE WELDING |
A group of welding processes that producescoalescence at temperatures essentially below the melting point of the base metal being joined, without the addition of a brazing filler metal.Pressure mayor may not be used. |
| WELDING |
SPATTER |
The metal particles expelled during fusion welding, that do notform a part of the weld. |
| WELDING |
SPELTER |
is common brass, the first material used to make a brazed jointin ferrous material. |
| WELDING |
SPOT WELD |
Weld made between or upon overlapping members in whichcoalescence may start and occur on the faying surfaces or may proceedfrom the surface of one member. The weld cross section (plan) isapproximately circular. |
| WELDING |
SPRAY TRANSFER ARC WELDING |
Metal transfer in which moltenmetal from a consumable electrode is propelled axially across the arcin small droplets. |
| WELDING |
STACK CUTTING |
Thermal cutting of stacked metal plates arranged sothat all the plates are severed by a single cut. |
| WELDING |
STAGGERED INTERMITTENT WELD |
An intermittent weld on bothsides of a joint in which the weld increments on one side are alternated with respect to those on the other side. |
| WELDING |
STRINGER BEAD |
A type of weld bead made without appreciable weavingmotion. |
| WELDING |
STUD WELDING |
A general form for the joining of a metal stud orsimilar part to a workpiece. Welding may be effected by arc, resistance,friction or other suitable process, with or without external gas shielding. |
| WELDING |
SUBMERGED ARC WELDING |
An arc welding process in which the arcand molten metal are shielded by a blanket of granular, fusible materialon the workpieces. |
| WELDING |
SURFACING |
Application by welding, brazing or thermal spraying of alayer(s) of material to a surface to obtain desired properties ordimensions as opposed to making a joint. |
| WELDING |
TACK WELD |
A weld made to hold parts of a weldment in properalignment until final welds are made. |
| WELDING |
THERMIT WELDING |
Welding process that produces coalescence of metals by heating them with superheated liquid metal from a chemical reaction between a metal oxide and aluminium, with or without theapplication of pressure. |
| WELDING |
T-JOINT |
A joint between two members located approximately at right-angles to each other in the form of a T. |
| WELDING |
TORCH BRAZING |
A brazing process in which the heat required isfurnished by a fuel gas flame. |
| WELDING |
TWIN CARBON ARC WELDING |
Process that produces coalescence of metals by heating them with an electric arc between two carbonelectrodes. No shielding is used. |
| WELDING |
UNDER WELDING |
Depositing less filler material than required. |
| WELDING |
WEAVE BEAD |
A type of weld bead made with transverse oscillation. |
| WELDING |
WELD |
A localized coalescence of metals or non-metals produced either by heating the materials to the welding temperature, with or without theapplication of pressure or by the application of pressure alone and withor without the use of filler material. |
| WELDING |
WELDING ELECTRODE |
A component of the welding circuit through which current is conducted and which terminates at the arc, moltenconductive slag or base metal. |
| HEAT AND SURFACE TREATMENTS |
AGING |
The process of holding metals at room temperature or at apredetermined temperature for the purpose of increasing their hardnessor strength by precipitation. Aging is also used to increase dimensionalstability in metals such as castings. |
| HEAT AND SURFACE TREATMENTS |
AGE HARDENING |
Change in the physical properties, e.g., hardness andstrength, that occurs in certain light metals after heat treatment. |
| HEAT AND SURFACE TREATMENTS |
ALLOYING OF METAL |
The addition of varying proportions of otherelements to a basic metal in order to produce an alloy having specificproperties. |
| HEAT AND SURFACE TREATMENTS |
ANODIC TREATMENT |
Formation of a protective layer of oxide onthe surface of aluminium and its alloys by electrolytic action, in orderto resist corrosion. |
| HEAT AND SURFACE TREATMENTS |
ANNEALING |
A heat treatment in which metals are heated and then cooledvery slowly for the purpose of decreasing hardness. Annealing is used toimprove machinability and to remove stresses from weldments, forgingsand castings. Also used to remove stresses
resulting from cold workingand to refine and make uniform the microscopic internal structures of metals. |
| HEAT AND SURFACE TREATMENTS |
ANODIZING |
To subject a metal to electrolytic action, as takes place atthe anode of a cell, in order to coat it with a protective or decorativefilm, used for nonferrous metals. |
| HEAT AND SURFACE TREATMENTS |
AUSTEMPERING |
A heat treating process consisting of quenching a ferrousalloy at a temperature above the transformation range in a mediumsuch as molten lead, the temperature of the quenching medium is maintained below that of pearlite and above that of martensite
formationto produce a tough, hard microstructure. |
| HEAT AND SURFACE TREATMENTS |
AUSTENITIZING |
The process of forming austenite ( a solid solution of iron and carbon and sometimes other elements ). |
| HEAT AND SURFACE TREATMENTS |
BLACK OXIDE COATING |
Coating produced by converting the surfaceof iron or steel to black iron oxide having a thickness of about 0.0025mm. |
| HEAT AND SURFACE TREATMENTS |
CADMIUM PLATING |
Electroplating process for the application of cadmium to steel and iron parts to prevent rust. |
| HEAT AND SURFACE TREATMENTS |
CALORIZING |
Rust proofing process for ferrous metals in which analuminium film is formed on the surface of the metal. Means of protecting iron from oxidation at elevated temperatures. |
| HEAT AND SURFACE TREATMENTS |
CARBURIZING |
A process that introduces carbon into a heated solidferrous alloy by having it in contact with a carbonaceous material.The metal is held at a temperature above the transformation range fora period of time. This is generally followed by quenching
to producea hardened case. |
| HEAT AND SURFACE TREATMENTS |
CASE HARDENING |
Heating a steel in the presence of a solid, liquid orgas, rich in carbon, in order to enable the surface to be hardened, while retaining a tough, ductile core. |
| HEAT AND SURFACE TREATMENTS |
CHROMIUM PLATING |
Electrolytic deposition of chromium on a metalsurface, as a protection against corrosion, to provide improved wearingproperties, or to build up an undersize part. |
| HEAT AND SURFACE TREATMENTS |
CHROMIZING |
Similar to carburizing. Low carbon steel parts are packed with a mixture of alumina and chromium powder and heated in ahydrogen atmosphere, forming a surface layer of chromized materialof 10 to 20% chromium, according to time and temperature of
heating. |
| HEAT AND SURFACE TREATMENTS |
COLOURING METAL |
roduction of a coloured surface on a metal oralloy by the use of heat or chemical action, or by a combination of thetwo. |
| HEAT AND SURFACE TREATMENTS |
COSLETTIZING |
Rust proofing process in which an iron phosphate skinis formed on the surfaces of ferrous parts, the skin follows even themicroscopic irregularities, yet is remarkably tough and corrosionresistant. |
| HEAT AND SURFACE TREATMENTS |
DECARBONIZATION |
The loss of carbon from the surface of a ferrousalloy as a result of heating it in the presence of a medium such asoxygen that reacts with the carbon. |
| HEAT AND SURFACE TREATMENTS |
ELECTROLYTIC POLISHING |
Method of polishing metals in whichthe work forms the anode of an electrical circuit, and is suspended ina suitable bath of acid. |
| HEAT AND SURFACE TREATMENTS |
ELECTROPLATING |
Deposition of a metal on a surface by electrolyticaction. |
| HEAT AND SURFACE TREATMENTS |
FLAME HARDENING |
Process of hardening by which steel or cast ironis raised to a high temperature by a gas torch flame and then almostimmediately quenched. |
| HEAT AND SURFACE TREATMENTS |
GALVANIZING |
Rust prevention treatment which consists of coating themetal (iron or steel) with a fairly thick film of zinc. |
| HEAT AND SURFACE TREATMENTS |
HARDENING |
Process of increasing the hardness of a ferrous alloy by austenitizing and quenching, also the process of increasing the hardnessof some stainless steels and non-ferrous alloys by solution heattreatment and precipitation. |
| HEAT AND SURFACE TREATMENTS |
HARD SURFACING |
Arc welding a surface layer usually at strategic spotson a part, using an electrode having a suitable alloy content for thepurpose. Also known as SURFACING and FACING. |
| HEAT AND SURFACE TREATMENTS |
HEAT TREATMENT |
Operation or combination of operations, involvingthe heating and cooling of a metal or alloy in its solid state with theobject of changing the characteristics of the material. |
| HEAT AND SURFACE TREATMENTS |
HOT ROLLING |
Surface layers of noble metals are often hot rolled (orinlayed) on less noble metals. |
| HEAT AND SURFACE TREATMENTS |
INDUCTION HARDENING |
Heating the surface of cast iron or toolsteel by means of electromagnetic currents followed by a quench. |
| HEAT AND SURFACE TREATMENTS |
LACQUERING |
A protective coat given to an article to prevent the polishedsurface from tarnishing, to prevent oxidation or to improve the generalappearance and make the article more pleasing to the eye, and hencemore saleable. |
| HEAT AND SURFACE TREATMENTS |
MARTEMPERING |
The process of quenching an austenitized ferrous alloy to a temperature just above or near the M’s point and maintaining until the temperature throughout the part is uniform. The alloy is then allowedto cool slowly in air through the range of
martensitic formation. |
| HEAT AND SURFACE TREATMENTS |
METALLIZING |
Metal spraying process in which the coating metal ismelted (either in a gas flame or in a separate melting pot), thenatomized by an air blast and deposited in atomized form on the surfaceto be coated. |
| HEAT AND SURFACE TREATMENTS |
NEGRADIZING |
Rust proofing process in which a ferrosoferric oxidesurface is produced on steel or iron. |
| HEAT AND SURFACE TREATMENTS |
NICKEL PLATING |
Deposition ofnickel on a metal by electrolytic actionto provide a protective surface or to build up the surface of a worn orundersize part. |
| HEAT AND SURFACE TREATMENTS |
NITRIDING |
A process of case hardening in which a special ferrous alloy is heated in an atmosphere of ammonia or is in contact with any othernitrogenous material. By this, surface hardening is achieved by theabsorption of nitrogen without quenching. |
| HEAT AND SURFACE TREATMENTS |
NORMALIZING |
Process applied to iron base alloys, such as steel, torefine the grain structure and remove the effects of previous processingfor example hot rolling. |
| HEAT AND SURFACE TREATMENTS |
ORGANIC FINISHING |
Coating a surface with a continuous film of anorganic material for protecting the surface from corrosive influences,for enhancing the appearance or a combination of both. |
| HEAT AND SURFACE TREATMENTS |
PARKERIZING |
A coslettizing process in which a patented mixture of iron and manganese phosphates is used in solution to provide a rustproof surface on iron and steel parts. |
| HEAT AND SURFACE TREATMENTS |
PHOSPHATE COATING |
Coating produced by converting the surfaceof iron or steel parts to insoluble phosphate, such as iron phosphateor zinc iron phosphate. |
| HEAT AND SURFACE TREATMENTS |
PICKLING |
Treatment of objects with an acid solution to remove all oxide,scale or dirt. Usually done to clean and brighten the surface, althoughsometimes used for etching. |
| HEAT AND SURFACE TREATMENTS |
POWDER COATING |
Surface coating of almost any metal or alloy appliedto another by powder method. |
| HEAT AND SURFACE TREATMENTS |
PRECIPITATION HARDENING |
A process of hardening an alloy by heat treatment in which a constituent precipitates from a supersaturated solid solution while at room temperature or at some slightly elevatedtemperature. |
| HEAT AND SURFACE TREATMENTS |
QUENCHING |
Rapid cooling of a metal in a bath of fluid during heattreatment after it has been heated to a given temperature, thus trappingthe molecules of the metal in the desired structure. |
| HEAT AND SURFACE TREATMENTS |
RECRYSTALLIZATION |
A process in which the distorted grain structureof metals that are subjected to mechanical deformation is replaced by a new strain free grain structure during annealing. |
| HEAT AND SURFACE TREATMENTS |
RUST PROOFING |
Treatment of iron and steel parts to render themresistant to rust, implies a more permanent form of protection. |
| HEAT AND SURFACE TREATMENTS |
SHERADIZING |
Heat treatment process in which zinc dust is used forproducing a rust proof surface on ferrous metals. It derives its title fromthe name of the inventor SHERARD OSBORN COWPER COLES. |
| HEAT AND SURFACE TREATMENTS |
SILICONIZING |
Process in which iron and steel parts are impregnated with silicon for improving the surface resistance to corrosion, heatand wear. |
| HEAT AND SURFACE TREATMENTS |
SOAKING |
A prolonged heating of a metal at a predetermined temperatureto create a uniform temperature throughout its mass. |
| HEAT AND SURFACE TREATMENTS |
SOLUTION HEAT TREATMENT |
A process in which an alloy is heatedto a predetermined temperature far a length of time that is suitable toallow a certain constituent to enter into solid solution. The alloy isthen cooled quickly to hold the constituent in solution, causing
themetal to be in an unstable supersaturated condition. This condition isoften followed by age hardening. |
| HEAT AND SURFACE TREATMENTS |
STRAIN HARDENING |
An increase in hardness and strength of a metalthat has been deformed by cold working or at temperatures lowerthan the recrystallization range. |
| HEAT AND SURFACE TREATMENTS |
SUBZERO HEAT TREATMENT |
Method of heat treatment of steel,introducing a cooling period or periods at a temperature well below freezing point, the object being to ensure complete transformation of austenite to martensite. |
| HEAT AND SURFACE TREATMENTS |
TEMPERING STEEL |
eat treatment designed to relieve the stresses andbrittleness set up in carbon or alloy steel tools and other parts afterhardening and to restore the required degree of toughness and ductility to hardened steel. |
| HEAT AND SURFACE TREATMENTS |
TINNING |
Application of a layer of tin to the surface of another metal,either as a protection against corrosion or as a preliminary to soldering. |
| HEAT AND SURFACE TREATMENTS |
WORK HARDENING |
Phenomena in which the grains become distortedand elongated in the direction of working (rolling). This process, alsocalled STRAIN HARDENING, hardens and strengthens metals butreduces their ductility. |
| HEAT AND SURFACE TREATMENTS |
ZINC PLATING |
Electroplating process for the deposition of zinc onmetallic surfaces. |
| MECHANICS OF MACHINES |
ABSOLUTE MOTION |
Motion of a body in relation to some otherbody which is at rest. |
| MECHANICS OF MACHINES |
ACCELERATION |
Rate of change of velocity with respect to time, of aparticle which is in motion. It is a vector quantity. |
| MECHANICS OF MACHINES |
ADDENDUM |
The radial distance from the pitch circle to the top of thetooth. |
| MECHANICS OF MACHINES |
ANGULAR ACCELERATION |
The time rate of change of angular velocity. |
| MECHANICS OF MACHINES |
ANGULAR VELOCITY |
The time rate of change of angular displacementof a point rotating about a fixed axis (expressed in radians per unittime) Angular velocity of a machine part is often expressed inrevolutions per minute (RPM) and is denoted by n. |
| MECHANICS OF MACHINES |
ANGULAR VELOCITY OF PRECISION |
The rate of change in thedirection of the plane of rotation of a rotating disc. |
| MECHANICS OF MACHINES |
ARC OF CONTACT |
The arc traced out along the pitch circle while onepair of teeth of gear wheels is in contact (divided into arc of approachand arc of recess). |
| MECHANICS OF MACHINES |
BEVEL GEARING |
Gearing arrangement in which the axes of the shaftsconnected by gears intersect. |
| MECHANICS OF MACHINES |
CAM |
A reciprocating, oscillating or rotating body which impartsreciprocating or oscillating motion to a second body, called theFOLLOWER with which it is in contact. |
| MECHANICS OF MACHINES |
CAM PROFILE |
The surface profile of the cam that decides the desiredmotion of the follower. |
| MECHANICS OF MACHINES |
CENTRIFUGAL FORCE |
Radial outward force acting on a body movingalong a circular path with uniform velocity. |
| MECHANICS OF MACHINES |
CENTRIFUGAL GOVERNOR |
The effort of the governor is obtained fromthe change in centrifugal force on (usually) two rotating masses, knownas balls, when an increase or decrease in the governor speed occurs. |
| MECHANICS OF MACHINES |
CENTRIPETAL FORCE |
The force that must act radially inward in orderto constrain a particle to follow a curved path at uniform velocity. |
| MECHANICS OF MACHINES |
CIRCULAR PITCH |
Length of arc round the pitch circle between thecorresponding points on adjacent teeth of a gear. |
| MECHANICS OF MACHINES |
COMPLEX MECHANISMS |
Mechanisms which have two or morefloating links. |
| MECHANICS OF MACHINES |
COMPOSITION OF VECTORS |
Composition refers to the addingtogether of any number of vectors. The sum is called their resultantand the vectors are called the components of the resultant. |
| MECHANICS OF MACHINES |
COMPOUND CHAIN |
A kinematic chain in which there are more thanfour pairs. |
| MECHANICS OF MACHINES |
COMPOUND GEAR TRAIN |
A gear train containing compound gears i.e., gears, two or more in number integral with one another being usedon the same shaft. |
| MECHANICS OF MACHINES |
COMPOUND PENDULUM |
A rigid body suspended vertically so as tooscillate with small amplitude under the action of gravity. |
| MECHANICS OF MACHINES |
CONSERVATION OF ENERGY |
The total energy possessed by a systemof moving bodies is at every instant constant, provided no energy isrejected to or received from a source external to the system. |
| MECHANICS OF MACHINES |
CONSERVATION OF MOMENTUM |
For a system of moving bodies which is not acted upon by any external forces, the sum of the momentsremain constant. |
| MECHANICS OF MACHINES |
CONTROLLING FORCE OF A GOVERNOR |
The inward radial forceexerted on each ball of a centrifugal governor by the arms, springs etc., which are attached to it. |
| MECHANICS OF MACHINES |
CURVILINEAR MOTION |
A translation in which points in the body move along curved path (motion of a wheel). |
| MECHANICS OF MACHINES |
CYCLE OF MOTION |
Motion of a mechanism when it moves throughall its possible configurations and returns to its starting position. Thetime required for one cycle is called PERIOD. |
| MECHANICS OF MACHINES |
CYCLOIDAL TEETH |
Profile of the teeth formed by the locus of apoint on a circle rolling on the inside (for the flank) and on the outside(for the face) of the pitch circle. |
| MECHANICS OF MACHINES |
CYLINDRICAL CAM |
Type of cam in which the motion of the followeris controlled by a path traced out on the surface of a cylinder which isrotating about its axis. |
| MECHANICS OF MACHINES |
DEAD WEIGHT GOVERNOR |
The governor in which the radius of theball path is controlled by levers and weights, the latter being usually attached to the control sleeve. |
| MECHANICS OF MACHINES |
DEDENDUM |
The radial distance from the pitch circle to the bottom of the tooth space. |
| MECHANICS OF MACHINES |
DIAMETRAL PITCH |
Number of teeth per inch diameter. |
| MECHANICS OF MACHINES |
DISC CAM |
An irregular disc rotating about a fixed axis and impartingreciprocating or oscillating motion to a follower in a plane at rightangles to the cam axis. |
| MECHANICS OF MACHINES |
DYNAMICS OF MACHINES |
Treatment with the forces acting on theparts of a machine and the motions resulting from these forces. |
| MECHANICS OF MACHINES |
DYNAMOMETER |
A device for measuring the forces or couples whichtend to change the state of rest or of uniform motion of a body. |
| MECHANICS OF MACHINES |
ELLIPTIC TRAMMEL |
An instrument used for drawing ellipses. |
| MECHANICS OF MACHINES |
ENERGY |
Capacity for doing work. |
| MECHANICS OF MACHINES |
EPICYCLIC GEAR TRAINS |
Gear trains in which the axis of one ormore gears moves relative to the frame. The gear at the centre is calledthe SUN, and gears whose axes move are called PLANETS. Also calledPLANETARY GEARS. |
| MECHANICS OF MACHINES |
EPICYCLOID |
The locus of a point on the circumference of a circle whichrolls outside a circular arc, without slipping. |
| MECHANICS OF MACHINES |
FLOATING LINK” |
A link in a mechanism which does not have a fixedcenter of rotation (e.g. coupler in a four bar linkage).” |
| MECHANICS OF MACHINES |
FORCE |
The entity which when acts on a body can cause a change in itsvelocity or direction or both. |
| MECHANICS OF MACHINES |
FRAME |
That part of a machine which is stationary and which supportsthe moving parts. |
| MECHANICS OF MACHINES |
FRICTION DRIVE |
Drive in which the rotation of one body causes anotherbody in contact with it to rotate due to sufficient friction between thebodies. |
| MECHANICS OF MACHINES |
GEAR CLEARANCE |
The radial distance from the top of the tooth to thebottom of the tooth space in a mating gear unit. |
| MECHANICS OF MACHINES |
GEAR TRAIN |
Unit composed of two or more gears in mesh for thepurpose of transmitting motion from one shaft to another. |
| MECHANICS OF MACHINES |
GOVERNOR |
Device that controls the mean speed of an engine over aperiod of time, as distinct from the flywheel, which limits thefluctuation of speed during one cycle but is not able to prevent achange in mean speed from cycle to cycle. |
| MECHANICS OF MACHINES |
GOVERNOR EFFORT |
Mean force exerted at a sleeve due to a 1% changein speed of governor. |
| MECHANICS OF MACHINES |
GOVERNOR POWER |
Work done at the sleeve for a 1% change in speed,equal to the governor effort times the sleeve displacement. |
| MECHANICS OF MACHINES |
GYROSCOPIC ACCELERATION |
The rate of change of angular velocity of precision of a rotating disc. |
| MECHANICS OF MACHINES |
HELICAL MOTION |
Motion of a body in which each point in the body describes a helix. Helix is the locus of a point which rotates about anaxis at a fixed distance and at the same time moves parallel to the axis. |
| MECHANICS OF MACHINES |
HELICAL GEARING |
A type of spur gearing in which although the axesof the shafts are parallel, the teeth are cut on helices instead of straightacross the wheels parallel to the axis. |
| MECHANICS OF MACHINES |
HIGHER PAIRS |
Types of kinematic pairs, namely, two elements generally have line or point contact and the pair must be force closed in orderto provide completely constrained motion. |
| MECHANICS OF MACHINES |
HUNTING OF GOVERNOR |
The governor is said to hunt if the enginespeed is caused to fluctuate continually above and below the mean speed. |
| MECHANICS OF MACHINES |
HYPOCYCLOID |
The locus of a point on the circumference of a circle which rolls inside a circular arc without slipping. |
| MECHANICS OF MACHINES |
IMPULSE |
Time integral of the impulsive force acting on a body. |
| MECHANICS OF MACHINES |
IMPULSIVE FORCE |
Force that acts on a body for an extremely short intervalof time and makes the body to move. Occur in collisions, in explosions,in the striking of a nail by a hammer or of a pile by a tup or monkey. |
| MECHANICS OF MACHINES |
INERTIA GOVERNOR |
Governor in which the position of the flyballsare affected by the rate of change of speed of the governor shaft. |
| MECHANICS OF MACHINES |
INSTANT CENTRE |
(1) A point in one body about which another body is rotating either permanently or at the instant (2) A point commonto two bodies having the same linear velocity in both magnitude anddirection in each. |
| MECHANICS OF MACHINES |
INTERMITTENT MOTION MECHANISM |
A linkage which convertscontinuous motion into intermittent motion (e.g., indexing mechanism). |
| MECHANICS OF MACHINES |
INVOLUTE |
The locus of a point on a straight line which rolls, withoutslipping, on the circumference of a circle, or alternatively the locus of apoint on the chord which is held taught and unwound from a cylinder. |
| MECHANICS OF MACHINES |
INVOLUTE TEETH |
The outline of a tooth traced out by a point on achord unwrapped from a circle (known as base circle). |
| MECHANICS OF MACHINES |
ISOCHRONISM OF GOVERNOR |
A governor is said to be isochronous,if , neglecting friction, the equilibrium speed is the same for all radiiof the flyballs. |
| MECHANICS OF MACHINES |
KENNEDY’S THEOREM |
Any three bodies having plane motion relativeto one another have three instant centers, and they lie in a straight line. |
| MECHANICS OF MACHINES |
KINEMATIC CHAIN |
A group of links either joined together or arrangedin a manner that permits them to move relative to one another. |
| MECHANICS OF MACHINES |
KINEMATIC DIAGRAM |
A scale drawing representing the machine sothat only the dimensions which affect its motions are recorded. |
| MECHANICS OF MACHINES |
KINEMATIC PAIR |
Two bodies in contact, between which there is relativemotion and this motion is completely constrained e.g., turning pair,sliding pair, screw pair. |
| MECHANICS OF MACHINES |
KINEMATICS OF MACHINES |
A study of the relative motion of machine parts e.g., displacement, velocity and acceleration. |
| MECHANICS OF MACHINES |
KINETICS |
Study which deals with the inertia force arising from thecombined effect of the mass and the motion of the parts. |
| MECHANICS OF MACHINES |
LINEAR ACCELERATION |
The time rate of change of liner velocity. |
| MECHANICS OF MACHINES |
LINEAR VELOCITY |
The time rate of change of linear displacement of apoint or body. |
| MECHANICS OF MACHINES |
LINK |
Name given to any body which has relative motion to another. Alsocalled ELEMENT. A RIGID LINK is one whose deformations are so small that they can be neglected in determining the motions of various other links in a machine. A belt or chain is
a FLEXIBLE LINK. |
| MECHANICS OF MACHINES |
LOWER PAIRS |
Types of kinematic pairs, namely two elements have surfacecontact and when relative motion takes place, the surface of one elementslides over the surface of the other element. |
| MECHANICS OF MACHINES |
MACHINE |
A combination of resisting bodies, with successfully constrainedrelative motions, which is used for transmitting or transporting availableenergy so as to do some particular kind of work e.g., electrical motor,internal combustion engine. |
| MECHANICS OF MACHINES |
MASS OF A BODY |
The property of a body which determines its resistanceto change its velocity. |
| MECHANICS OF MACHINES |
MECHANISM |
A constrained kinematic chain which means the motionof anyone link will give a definite, predictable motion to each of theothers. |
| MECHANICS OF MACHINES |
MODULE |
Reciprocal of diametral pitch. |
| MECHANICS OF MACHINES |
MOMENTUM |
The product of the mass and velocity of a body. |
| MECHANICS OF MACHINES |
NORMAL ACCELERATION |
The time rate of change of velocity of apoint in a direction normal to its path. This results from a change inthe direction of its linear velocity. |
| MECHANICS OF MACHINES |
OLDHAM COUPLING |
A mechanism for connecting two shafts havingparallel misalignment. The coupling transmits a constant velocity ratio. |
| MECHANICS OF MACHINES |
PAIR |
Two bodies in contact constitute a pair. LOWER PAIRING exists when two surfaces are in contact. HIGHER PAIRING refers to thecontact which exists at a point or along a line. |
| MECHANICS OF MACHINES |
PANTOGRAPH |
Mechanism used to reproduce to an enlarged or reducedscale and as exactly as possible the path described by a given point. |
| MECHANICS OF MACHINES |
PARALLEL MECHANISMS |
Linkages which give parallel motion (e.g.,pantograph which is used for reducing or enlarging drawings and maps,also used for grinding cutting tools or cutting torches to duplicatecomplicated shapes). |
| MECHANICS OF MACHINES |
PATH OF CONTACT |
The path traced out by the point of contactbetween a pair of teeth (may be divided into approach and recess). |
| MECHANICS OF MACHINES |
PINION |
The small of the two mating gear wheels. |
| MECHANICS OF MACHINES |
PITCH CIRCLES |
Equivalent rolling circles for a pair of mating gears. |
| MECHANICS OF MACHINES |
PITCH CIRCLE DIAMETER |
The diameter of a circle which by a purerolling action would transmit the same motion as the actual gearwheel. |
| MECHANICS OF MACHINES |
PITCH LINE |
The point of contact of two circles. |
| MECHANICS OF MACHINES |
PITCH SURFACES |
The cylindrical surfaces of the equivalent rolling circlesfor a pair of mating gears. |
| MECHANICS OF MACHINES |
PLANE MOTION |
A body has plane motion if all the points move inplanes which are parallel to some reference plane (called plane of motion). |
| MECHANICS OF MACHINES |
POSITIVE DRIVE |
The drive that exists in a direct contact mechanism if motionof the driving link compels the follower to move (e.g., cam and follower). |
| MECHANICS OF MACHINES |
POWER |
Rate of doing work or work done in unit time. |
| MECHANICS OF MACHINES |
PRECESSIONAL MOTION |
The change in the direction of the plane of rotation of a rotating disc. |
| MECHANICS OF MACHINES |
PRESSURE ANGLE |
Angle between the common normal and the tangentat the pitch point in a gear drive. Also called ANGLE OFOBLIQUITY. |
| MECHANICS OF MACHINES |
QUICK RETURN MECHANISM |
The mechanism used in machine toolssuch as shapers and power driven saws for the purpose of giving thereciprocating cutting tool a slow cutting stroke and a quick return stroke with a constant velocity of the driving crank. |
| MECHANICS OF MACHINES |
RACK |
A portion of a gear wheel which has an infinitely large number of teeth. |
| MECHANICS OF MACHINES |
RACHETS |
Mechanisms used to transform motion of rotation ortranslation into intermittent rotation or translation. |
| MECHANICS OF MACHINES |
RECTILINEAR MOTION |
A motion wherein all points of the body move in straight line paths (e.g., piston motion). |
| MECHANICS OF MACHINES |
RELATIVE INSTANTANEOUS CENTER |
In the case of two bodies, itis the point about which either of them appears to turn (at that instant)if the other is considered fixed (e.g., if two links in a mechanism arepinned together, the pin becomes the relative instantaneous center, if
the two bodies are in pure rolling contact, the point of contact is therelative instantaneous center). |
| MECHANICS OF MACHINES |
RELATIVE MOTION |
A body has motion relative to another body only if there is a difference in their absolute motions. |
| MECHANICS OF MACHINES |
RESOLUTION OF VECTORS |
Resolution refers to the breaking downof a vector into any number of component vectors. |
| MECHANICS OF MACHINES |
REVERTED GEAR TRAIN |
The compound gear train in which the firstand the last gears are coaxial (e.g., units used in automobile transmission,lathe back gears, industrial speed reducers and in clocks). |
| MECHANICS OF MACHINES |
ROLLING CONTACT |
In a direct contact mechanism, rolling contactexists only if there is no sliding and hence the tangential componentsof velocities of the contact point on the two bodies are equal inmagnitude and direction. |
| MECHANICS OF MACHINES |
ROTATION |
In rotation all points in a body remain at fixed distancesfrom a line which is perpendicular to the plane of motion. This line isthe AXIS OF ROTATION. |
| MECHANICS OF MACHINES |
SCALAR QUANTITIES |
Those quantities which have magnitude only (and no direction) e.g., distance, area, volume and time. |
| MECHANICS OF MACHINES |
SENSITIVITY OF GOVERNOR |
Ratio of the mean speed to the speedrange of the governor over its limits of operation. |
| MECHANICS OF MACHINES |
SIMPLE AND COMPOUND MECHANISM |
A simple mechanismconsists of three or four links. All other mechanisms, or those consistingof more than four links are compound mechanisms. Compoundmechanisms are usually made up of combinations of simplemechanisms. |
| MECHANICS OF MACHINES |
SIMPLE GEAR TRAIN |
A gear train in which there is only one gear oneach shaft. |
| MECHANICS OF MACHINES |
SIMPLE HARMONIC MOTION |
A particle having rectilinear motionhas simple harmonic motion if its acceleration is proportional to thedisplacement of the particle from a fixed point and is of opposite sign. |
| MECHANICS OF MACHINES |
SKEW GEARING |
Gearing arrangement in which the axes of the shaftsconnected by gears are non parallel and non intersecting. |
| MECHANICS OF MACHINES |
SLIDING CONTACT |
Sliding exists in a direct contact mechanism whenever the bodies have relative motion along the tangent throughtheir point of contact. |
| MECHANICS OF MACHINES |
SPEED |
The rate of change of magnitude of displacement with respect totime. |
| MECHANICS OF MACHINES |
SPHERICAL MOTION |
A point has spherical motion if it moves inthree dimensional space and remains at a fixed distance from somefixed point. A body has spherical motion if each point in the body hasspherical motion. |
| MECHANICS OF MACHINES |
SPIRAL GEARING |
A type of skew gearing, but differs in one respect i.e.,the contact between pitch surfaces is point contact instead of line contact. |
| MECHANICS OF MACHINES |
SPRING LOADED GOVERNOR |
The governor in which the control of the flyballs is by springs operated directly on the balls or on the sleeve. |
| MECHANICS OF MACHINES |
SPUR GEARING |
Gearing arrangement in which the axes of the shaftsconnected by gears are parallel and the teeth are cut parallel to the axes. |
| MECHANICS OF MACHINES |
STABILITY OF GOVERNOR |
The governor is said to be stable if there isone equilibrium speed for each radius of rotation of the flyballs andthis speed increases with the radius. |
| MECHANICS OF MACHINES |
STATICS |
Study which deals with forces which act on the various parts, when these parts are assumed to be without mass. |
| MECHANICS OF MACHINES |
STRAIGHT LINE MECHANISMS |
Linkages having a point that movesalong a straight line or nearly along a straight line, without being guidedby a plane surface (e.g., Watts mechanism, Scott Russell mechanism). |
| MECHANICS OF MACHINES |
TANGENTIAL ACCELLERATION |
The time rate of change of velocity of a point in a direction tangent to its path. This results from a changein its linear velocity. |
| MECHANICS OF MACHINES |
TRANSLATION |
A body has translation if it moves so that all straightlines in the body move in parallel positions. |
| MECHANICS OF MACHINES |
UNCONSTRAINED KINEMATIC CHAIN |
An arrangement of links wherein for a given motion of one of the links, each of the others isnot constrained to move in a definite predictable manner. |
| MECHANICS OF MACHINES |
UNIVERSAL JOINT |
Joint used to connect intersecting shafts (e.g., Hookeor cardan joint). |
| MECHANICS OF MACHINES |
VECTOR QUANTITIES |
Those entities which have magnitude anddirection. (e.g., displacement, velocity, acceleration and force). Vectorquantities are represented by a straight line with an arrow head (magnitudeis represented by its length and direction by the arrow
head). |
| MECHANICS OF MACHINES |
VELOCITY |
When a particle is in motion, the rate of change of itsdisplacement with respect to time. It is a vector quantity. |
| MECHANICS OF MACHINES |
VELOCITY RATIO OF GEAR TRAIN |
Ratio of the angular velocity of the first gear in the train to the angular velocity of the last gear. |
| MECHANICS OF MACHINES |
WORM GEARING |
A form of special gearing in which the axes of thedriving and driven shafts are usually at right angles and the velocity ratio is high, the driving gear being of smaller diameter. |
| MECHANICS OF MACHINES |
WORK |
Product of the force acting on a body and the displacement of thebody caused by that force. |
| MECHANICS OF MACHINES |
WORKING SURFACE |
With respect to a gear, the working surface abovethe pitch surface is called the FACE OF THE TOOTH and that below the pitch surface is called the FLANK OF THE TOOTH. |
| MATERIAL HANDLING |
ADJUSTABLE RAMP |
A loading platform that is power operated ormechanically operated. |
| MATERIAL HANDLING |
APRON CONVEYOR |
A conveyor for transporting packages or bulk materials, consisting of a series of metal or wood slats (also rubber,cotton, felt wire etc.) attached to an endless chain. Also called SLATCONVEYOR. |
| MATERIAL HANDLING |
ARRESTING GEAR |
Means of sustaining the load which do not interfere with the hoisting gear but prevent it from coming down due to gravity e.g., ratchet and pawl arrangements and friction type. |
| MATERIAL HANDLING |
AUTOMATIC GRAB |
A crane grab in which the grasping and releasing of the load are effected without manual assistance. |
| MATERIAL HANDLING |
BAND or BELT CONVEYOR |
An endless band passing over, and drivenby horizontal pulleys, thus forming a moving track which is used toconvey loose material or small articles. |
| MATERIAL HANDLING |
BALANCED LUFFING |
Luffing mechanism, in which the moment dueto the weight of the jib is at balance with the moment produced by the counterweight. |
| MATERIAL HANDLING |
BARGES AND LIGHTERS |
Shallow draft, box like vessels used for cargotransport in protected waters such as bays, rivers and canals. |
| MATERIAL HANDLING |
BARREL ELEVATOR |
This comprises parallel travelling chains, with curvedarms projecting. The chains pass over sproket wheels at the top andbottom of the elevator, and lift barrels from a loading platform to arunway. |
| MATERIAL HANDLING |
BARREL HOPPER |
A machine for unscrambling, orientating and feedingsmall components during a manufacturing process, in which a revolvingbarrel tumbles the components onto a sloping, vibrating feeding blade. |
| MATERIAL HANDLING |
BAY |
An area used for the open storage of heavy items. |
| MATERIAL HANDLING |
BELT CONVEYOR |
A conveyor which consists of a belt of suitable materialsuch as rubber, canvas, balata etc., running over a pair of end drums orpulleys and supported at intervals by a series of rollers called idlers,these in turn being supported on a conveyor
frame. |
| MATERIAL HANDLING |
BELT CONVEYOR IDLERS |
Number of idler rolls provided betweenthe terminal pulleys to prevent the belt from sagging due to gravity and under the load. |
| MATERIAL HANDLING |
BELT CONVEYOR PULLEYS |
Wheels used to support and drive thebelt. They include drive, terminal or bend, take up and snub pulleys. |
| MATERIAL HANDLING |
BIN |
An enclosed space for storing certain types of goods. |
| MATERIAL HANDLING |
BIN TICKET |
Tickets attached to storage places to provide informationon the quantity of goods received, issued and on hand. |
| MATERIAL HANDLING |
BRACING |
Securing the contents of a shipment to prevent shifting anddamage. |
| MATERIAL HANDLING |
BRAKE |
Arrangement in the hoisting machinery to stop the load and holdit when applied to the hoisting motion or bring the relevant mechanismsat rest within specified braking distances. May be a band brake, discbrake or a cone brake. |
| MATERIAL HANDLING |
BUCKET ELEVATOR |
Conveyor equipped with buckets which carry bulk material in the vertical or near vertical direction, loading is at the bottomand discharging is at the top. |
| MATERIAL HANDLING |
BULK COMMODITY TRUCK |
Trucks used to transport loose bulk materials, such as sand and gravel. |
| MATERIAL HANDLING |
BUCKET OR SKIP HOISTS |
Hoisting equipment for handling of bulk materials in self dumping buckets or skips. |
| MATERIAL HANDLING |
BULLDOZER |
A pendant attachment mounted on crawler and wheeltractors, that strips off soil surface and transports it to the requiredspot. |
| MATERIAL HANDLING |
CANTILEVER RACKS |
Racks supported only on one end, leaving theother end open for placing and removing the long bars, rods etc. |
| MATERIAL HANDLING |
CAPSTAN DRUM |
Equipment used for hoisting anchors on board ships,hauling various loads etc. |
| MATERIAL HANDLING |
CAR PULLERS |
Equipment used for shunting railroad cars at ports and docks. |
| MATERIAL HANDLING |
CAROUSEL |
A rotating or circulating storage device. The worker stays inone place while the needed item comes to the work station. |
| MATERIAL HANDLING |
CHAIN CONVEYORS |
Conveyors which employ chains of various designsas the driving traction element. Chain conveyors carry aprons, pans,buckets, cradles, pockets, cars etc. |
| MATERIAL HANDLING |
CHOCKS |
Supports used to keep boxes off the ground. |
| MATERIAL HANDLING |
CHUTE |
An inclined surface with sides for material movement by gravity. |
| MATERIAL HANDLING |
COLD STORAGE WAREHOUSE |
A warehouse used for storing highly perishable goods and foods. |
| MATERIAL HANDLING |
CONTAINERIZATION |
Transportation of freight in sealed portablecontainers. |
| MATERIAL HANDLING |
CONVEYOR |
A mechanism that moves material along a fixed path. A mechanical device for carrying packages or bulk material from placeto place (as by an endless moving belt or a chain of receptacles). |
| MATERIAL HANDLING |
COUNTER WEIGHTS |
Weights provided on cranes to offset the dead weight of metal structure and, to a certain extent, the moment due tothe hook load. |
| MATERIAL HANDLING |
COVERED HOPPER |
A freight car with a closed top designed to meetthe needs of malt and grain shippers. |
| MATERIAL HANDLING |
CRANE |
A machine for raising, shifting and lowering heavy weights by means of projecting swinging arm or with the hoisting apparatussupported on an overhead track. |
| MATERIAL HANDLING |
CRANE DERRICK |
The distance between the loads centre of gravity andthe axis about which crane boom can swing. |
| MATERIAL HANDLING |
CRANE HELICOPTER |
A crane hung from a helicopter, used as a meansof moving loads and doing a variety of jobs in regions which are difficultof access, capable of descending vertically on the load and lifting itfrom the ground directly. |
| MATERIAL HANDLING |
CRAWLER CRANE |
A crane mounted on a crawler mounting, e.g., a framesupported by track laying assemblies which obtain the drive from anengine mounted on a rotating part of the crane. |
| MATERIAL HANDLING |
CREEPING DRIVE UNIT |
An arrangement frequently employed onelectric hoists to obtain extra low spotting speeds. |
| MATERIAL HANDLING |
DEAD ZONE |
In a shop floor, when two overhead bridge cranes serveadjacent bays, part of floor area (about 15 to 20%) inaccessible forany of the hooks, as close as they may be. This is dead zone. |
| MATERIAL HANDLING |
DERRICK |
A framework over a drill hole (e.g., on oil well) for supportingthe boring mechanism for hoisting. |
| MATERIAL HANDLING |
DIESEL ELECTRIC DRIVE |
System consisting of a diesel generator setand electric motors on all motions. |
| MATERIAL HANDLING |
DOUBLE BOTTOM RIG |
Two trailers joined to a tractor. |
| MATERIAL HANDLING |
DOUBLE FACED PALLET |
A pallet with two decks that form the topand bottom surfaces. |
| MATERIAL HANDLING |
DOUBLE STRING TIE |
A method of tying heavy packages. |
| MATERIAL HANDLING |
DOUBLE WALL CORRUGATED FIBREBOARD |
Fibreboardconsisting of three flat facings and two corrugated pieces arranged inalternate layers. |
| MATERIAL HANDLING |
DOUBLE WRAP |
Two or more sheets of paper used to wrap breakable articles. |
| MATERIAL HANDLING |
DRIVEWAY INSTALLATION |
A loading ramp that raises or lowers thetruck so that the floor of the truck is level with the dock. |
| MATERIAL HANDLING |
DRUM |
In hoisting unit, a device for spooling the rope in one layer or inmore than one layer. |
| MATERIAL HANDLING |
DUNNAGE |
Lumber or other material used to brace a shipment intransport. |
| MATERIAL HANDLING |
ELECTRIC DRIVE |
An arrangement consisting of an electric motor,suitable motor controls, and a gear train linking the motor with theoperating mechanism. |
| MATERIAL HANDLING |
ELEVATOR |
A platform or caged hoist that moves material or personnelfrom one level to another. |
| MATERIAL HANDLING |
ELEVATING GRADER |
Machine that cuts soil layer by layer and moves itaway by means of a conveyor into a dump or onto transporting facilities. |
| MATERIAL HANDLING |
ESCALATOR |
Chain conveyor specially adapted for the vertical transportationof people over an inclined path. It is an inclined conveyor with the drivingtraction in the form of steeps attached to step drive chains and each escalatorstep is carried on four
wheels riding on tracks. |
| MATERIAL HANDLING |
EXCELSIOR |
Shredded or curled pieces of wood. |
| MATERIAL HANDLING |
FISHYBACK |
The transportation of highway trailer bodies abroad ship. |
| MATERIAL HANDLING |
FLAMMABLE |
A marking on the box to indicate that the contents may easily set on fire or have a tendency to explode. |
| MATERIAL HANDLING |
FLAT BED TRAILER |
A flat surfaced platform with wheels. |
| MATERIAL HANDLING |
FLATTENED STRAND WIRE ROPE |
A modification of linear contactropes. During its manufacture, every strand laid from wires of circularcross,section is radially squeezed over the circumference so as to flattenthe wires. |
| MATERIAL HANDLING |
FLEX |
Flow tank car. A pressurized tank car that can unload in a few minutes. |
| MATERIAL HANDLING |
FLOATING CRANE |
A crane mounted on self propelled or towedpontoons, used for salvage work, along shore and offshore duties, cranemotions are accomplished with electric drives, commonly of the dctype employing the Ward Leonard control. |
| MATERIAL HANDLING |
FLOW RACK |
Rack in which the material can be inserted at one side and will move by gravity to the other where order picking takes place. |
| MATERIAL HANDLING |
FORCE OF GRAVITY |
Force decided by the attraction the earth exerts ona body which, unlike the mass, depends on the local value of theacceleration of free fall. |
| MATERIAL HANDLING |
FORK LIFT TRUCK |
Equipment designed to pick up, transport, stack and unstack pallet loads. |
| MATERIAL HANDLING |
FOURWAY PALLET |
A pallet design that permits entry of materialshandling equipment from four sides. |
| MATERIAL HANDLING |
FRAGILE |
A marking on the box to indicate that the contents are delicateand breakable. |
| MATERIAL HANDLING |
GANTRY CRANE |
Crane consisting of a bridge crane superimposed ontwo frames or legs operating on a rail track flush with the ground. |
| MATERIAL HANDLING |
GENERAL MERCHANDISE WAREHOUSE |
The most common typeof public warehouse for storing manufactured or non-manufacturedgoods that require protection. |
| MATERIAL HANDLING |
GONDALA |
A car with low sides and no top. |
| MATERIAL HANDLING |
GRAB |
Device suspended from the crane hook which grasp and release theload (of given shape and size) at almost no time. |
| MATERIAL HANDLING |
GRAVITY ROLLER CONVEYOR |
A material handling installation in which the bed consists of rolls fitted to a frame. Suitable for handlingof unit loads and containerized high volume materials. |
| MATERIAL HANDLING |
HAND DRIVE |
Manual operation which is in wide use on the hoistingand slewing motions of slow running, low capacity machinery. |
| MATERIAL HANDLING |
HOOK |
Multipurpose attachment widely used in hoisting installations,carries the load by one or more of slings made of hemp ropes or chains. |
| MATERIAL HANDLING |
HYDRAULIC POWER EQUIPMENT |
Unit which consists of an electricmotor or internal combustion engine driving a pump which feeds fluidinto the hydraulic operating cylinder through the lines with control valves. |
| MATERIAL HANDLING |
H WARP |
A method of wrapping large fragile items. |
| MATERIAL HANDLING |
HOISTING MACHINE |
Moves loads vertically as well as transfers themfrom one point of the area covered by the machinery into another. |
| MATERIAL HANDLING |
INDUSTRIAL TRUCK |
A self powered, individually operated conveyancefor moving materials or persons. |
| MATERIAL HANDLING |
JACK |
Device used to lift loads through a short height some 0.8 to 1 mused widely in repair and erection jobs, e.g., screw jacks, rack and lever jack’s rack and pinion jacks and hydraulic jacks. |
| MATERIAL HANDLING |
LANG LAY ROPE |
A rope in which the wires are twisted in the samedirection as the strands are. |
| MATERIAL HANDLING |
LEFT HAND LAY ROPES |
Ropes in which the strands bend round to theleft. |
| MATERIAL HANDLING |
LEVEL LUFFING |
Luffing mechanism which ensures that the crane hook travels along an almost horizontal path when luffing is in progress. |
| MATERIAL HANDLING |
LIFT |
Hoisting equipment adapted to lift loads vertically. |
| MATERIAL HANDLING |
LIFTING CAPACITY |
The maximum safe load the machine is designedto handle. |
| MATERIAL HANDLING |
LIFTING MAGNET |
Handling device, operating on direct current. Widely used in handling steel and cast iron loads. |
| MATERIAL HANDLING |
LIFTING TACKLE |
A system of stationary and movable sheavesinterlinked by a pliable member in the form of a wire rope to obtain again in either force (power lifting tackle) or speed (speed lifting tackle). |
| MATERIAL HANDLING |
LUFFING or DERRICKING |
It is the pivoting of the crane jib in a verticalplane so as to change the reach. |
| MATERIAL HANDLING |
MANIPULATOR |
A device that grasps an item and moves it to a new position or orientation for the next operation. It may be a simplepincer or complicated robot. |
| MATERIAL HANDLING |
MATERIALS HANDLING |
Procedures involving receiving, storing,sorting, packing, shipping, freight handling and controlling of goodsand materials. |
| MATERIAL HANDLING |
MONORAILS |
An overhead track (usually an I beam) upon which thecarriers or hoists move. |
| MATERIAL HANDLING |
MULTIPLE RACK CAR |
Special equipment designed to carry motor cars. |
| MATERIAL HANDLING |
NON-SPINNING ROPES |
Multilayer constructions having alternately opposite lays of individual layers. |
| MATERIAL HANDLING |
OPEN HOPPER |
A freight car with an open top and collapsible bottom. |
| MATERIAL HANDLING |
ORDINARY LAY ROPE |
A rope in which the direction of twist of wires isopposite to that of the strands in the rope. |
| MATERIAL HANDLING |
ORDINARY (untwisting) ROPES |
Ropes in which the wires and strandsfail to retain their position once the wire sizings are removed from theends and consequently, these ropes tend to untwist. |
| MATERIAL HANDLING |
ORIGINATING CARRIER |
The first carrier to receive the goods fromthe shipper. |
| MATERIAL HANDLING |
OVERHEAD BRIDGE CRANE |
A shop floor unit consisting of a trolley or crab equipped with a hoisting mechanism, a bridge travelling on wheels fitted to end carriages and supported by track rails, which intheir turn are fixed to rail supports provided either at the top
of theshop walls or columns. |
| MATERIAL HANDLING |
OVER LOAD PROTECTION DEVICE |
Units provided on the hoistingmotion that automatically cut out the hoisting motor on jib and towercranes when the excess of load lifted is not less than 10 per cent of therated capacity. |
| MATERIAL HANDLING |
PALLET |
A standard platform on which material is placed for storage andmovement. The platform has an upper and lower flat surface withspace between for the forks of an industrial lift truck. |
| MATERIAL HANDLING |
PIGGYBACK (TOFC) |
Transportation of highway trailers or demountabletrailer bodies on specially equipped cars. |
| MATERIAL HANDLING |
PIN WHEEL PLATFORM |
A pallet pattern used for the arrangement of items of unequal length or width. |
| MATERIAL HANDLING |
PIPE LINES |
Specialized carriers that transport petroleum or natural gas. |
| MATERIAL HANDLING |
PLATE CLAMP |
Handling attachment which is an eccentric clamp usedfor handling steel sheets and plates in the vertical position. |
| MATERIAL HANDLING |
PNEUMATIC CONVEYING |
Method of transporting bulk materials inthe form of powder, short fibre and granules over a pipe line as amixture with air or due to the pressure of air, e.g., suction or vacuumtype systems, pressure type systems, combination systems. |
| MATERIAL HANDLING |
PNEUMATIC DRIVE |
System in which compressed air is admitted intodirect acting cylinders under pressure, the piston rods are linked withthe business end. |
| MATERIAL HANDLING |
PORTABLE PLATE |
A loading ramp that can be moved to any loadingposition on the deck. |
| MATERIAL HANDLING |
POSITIONER |
A device that orients and positions the part for the nextoperation. |
| MATERIAL HANDLING |
POWER DRIVE |
Drive provided in the form of electric motor, steamengine, internal combustion engine, hydraulic or air motor. Includescombinations such as diesel electric, electro hydraulic, electropneumatic drives. |
| MATERIAL HANDLING |
POWER SHOVEL |
An earth digging machine with an operating member(bucket) which digs soil, carries it over a small distance and dumps itin a pile or onto transporting facilities. |
| MATERIAL HANDLING |
PREFORMED WIRE ROPES |
The ropes in which the wires and strands,before being laid, are preformed to fit the shape they carry in the rope. |
| MATERIAL HANDLING |
RACK |
A storage place for individual items or palletized loads. |
| MATERIAL HANDLING |
RAIL ROAD CRANE |
Crane mounted on a truck meeting railroadrequirements and supported by axles of varying number used for loadhandling and wreckage clearing purposes, carry a power unit which isa combination of a diesel, a generator and a number of electric motors. |
| MATERIAL HANDLING |
REACH OF CRANE |
Distance of the load from the axis of the rotary partof the crane, decided by crane stability, decreases with an increase inthe load to be handled. |
| MATERIAL HANDLING |
REVERSIBLE PALLET |
A pallet with an identical top and bottom deck. |
| MATERIAL HANDLING |
REVOLVING CRANE |
A crane which can lift up the load and transfer itto any point of a circle with a radius equal to the reach, being thus suitable for loading the rail road flat cars and lorries, for constructionsite works etc.e.g., travelling revolving crane,
fixed revolving crane. |
| MATERIAL HANDLING |
RIGHT HAND LAY ROPES |
Ropes in which the strands bend round tothe right. |
| MATERIAL HANDLING |
ROW PATTERN |
A pallet pattern used for the arrangement of items of unequal length or width. |
| MATERIAL HANDLING |
SCRAPER |
Machine that removes earth slice by slice, transports and places itin an earth structure, or pushes it to a dump and then levels the same. |
| MATERIAL HANDLING |
SCREW CONVEYORS |
Installations serving to move materials over atrough by a rotating screw. Also called SPIRAL CONVEYORS. |
| MATERIAL HANDLING |
SEAL |
A small metal strip that is placed on a railroad car door when loadingis completed. |
| MATERIAL HANDLING |
SELF CLOSING GRAB |
A crane grab which can pick up the loadautomatically but must be released with manual assistance. |
| MATERIAL HANDLING |
SELF LEVELING |
Bringing the lift to a stop so that its platform is level with the landing. |
| MATERIAL HANDLING |
SEMI GANTRY CRANES |
Hoisting installations in which one pair of legs travels over a track placed on a low foundation while the otherpair receives support from an elevated track laid on a trestle or track girder attached to the building. |
| MATERIAL HANDLING |
SHAKING CONVEYOR |
Unit which consists of a deck in the form of atrough or pan suspended from, or supported by a stationary frameand the deck is induced to oscillate, causing the material to movealong at a pace and in a mode governed by the character of theoscillations,
e.g., oscillating conveyors and vibrating conveyors. |
| MATERIAL HANDLING |
SINGLE FACED CORRUGATED FIBRE BOARD |
Fibre board with aflat facing of corrugated material on one side. |
| MATERIAL HANDLING |
SINGLE FACED PALLET |
A pallet consisting of one deck. |
| MATERIAL HANDLING |
SINGLE WALL CORRUGATED FIBRE BOARD |
Fibre board with aflat facing of corrugated material on both sides. |
| MATERIAL HANDLING |
SKID |
Similar to pallets except it has no bottom surface. |
| MATERIAL HANDLING |
SKIP HOIST |
Conveyor which consists of a bucket moving between guides, with the power of a cable reeved round sheaves and drums which turnthrough electric drives. Used for vertical movement of coal. |
| MATERIAL HANDLING |
SLIP SHEET |
A single sheet of heavy, strong, corrugated fibre board orplastic. Unit load is pulled on it and the forks of the lift truck slideunderneath. |
| MATERIAL HANDLING |
SLOTTED STYLE BOX |
A box with slots, made from a single piece of fibreboard. |
| MATERIAL HANDLING |
SOFC |
A container stacked on a flat car. |
| MATERIAL HANDLING |
SOLID FIBRE BOARD |
Two or more layers of fibre board glued togetherto make a single sheet. |
| MATERIAL HANDLING |
SPAN |
Horizontal distance between the axes of crane track rails. |
| MATERIAL HANDLING |
SPEED GUARD |
Device which prevents the hook loads from accelerationbeyond a set limit. They are usually centrifugal brakes (e.g., centrifugaldisc brake, centrifugal internal block brake), hydraulic units and eddy current brakes. |
| MATERIAL HANDLING |
SPIRAL or SCREW CONVEYORS |
Unit which employs an endlesshellicoid screw rotating in a trough. The movement of the screw gradually moves the material to a higher location. |
| MATERIAL HANDLING |
STABILITY OF A CRANE |
The ratio of the righting and tipping momentstaken about a tipping axis. |
| MATERIAL HANDLING |
STABILITY COEFFICIENT OF CRANE PROPER |
The ratio of themoment produced by the dead weight of all crane components, withthe allowance for a track gradient effect facilitating the chance of overturning, taken about a tipping axis to the moment set up by a wind pressure exceeding the
safe maximum operating value taken withrespect to the same tipping axis. |
| MATERIAL HANDLING |
STABILITY COEFFICIENT OF A CRANE UNDER A LOAD |
Ratioof the moment set up by the dead weight of crane components withthe allowance of additional forces (wind effect, inertia at starting andstopping the hoisting, slewing and travelling motions, effect of track ground gradient) taken about a
tipping axis to the moment due to the working load about the same axis. |
| MATERIAL HANDLING |
STOP OFF CAR |
A car that stops at two or more destinations to finishloading or to partly unload. |
| MATERIAL HANDLING |
STOWAGE |
Arrangement of freight in the hold of the ship. |
| MATERIAL HANDLING |
STRINGER |
Timber that runs the length of a pallet. |
| MATERIAL HANDLING |
TANK TRUCK |
A truck in which liquids are transported. |
| MATERIAL HANDLING |
TRACTOR |
A crawler or wheel mounted, self propelled vehicle designedto perform agricultural, earthmoving, road making, load carrying andother work. |
| MATERIAL HANDLING |
TRACTOR TRAILER TRAIN |
The combination of a puller unit with atrain of wheeled dollies. |
| MATERIAL HANDLING |
TRAVELLING CANTILEVER WALL CRANE |
Crane arranged to travelover tracks secured to a side wall of the building. |
| MATERIAL HANDLING |
TRAVELLING GANTRY CRANE |
A crane which has a rigid four leggedgantry travelling over a track laid along the work area, topping the gantry is a rotary part with a jib, a movable counter weight, hoisting and luffingunits. |
| MATERIAL HANDLING |
TRUCK |
A self powered wheel vehicle used for carrying loads and people. |
| MATERIAL HANDLING |
TRUCK CRANES |
Cranes mounted on chassis of standard design or onspecial purpose chassis with tyred wheels. |
| MATERIAL HANDLING |
TYPE I HAND CRANK |
Unit directly linked to the load brake andrequiring a constant effort in order to lower the load which descendsat a rate corresponding to the rate of crank rotation. |
| MATERIAL HANDLING |
TYPE II HAND CRANK |
An arrangement to effect lowering of load at aspeed exceeding that of hoisting and finds application where this modeof operation is called for by process requirements. |
| MATERIAL HANDLING |
TWO WAY PALLET |
A pallet design that permits forks or hand pallettrucks to enter from two sides only and in opposite directions. |
| MATERIAL HANDLING |
UNITIZED LOAD |
A grouping of smaller shipments that are boundtogether to travel as a single larger unit, also called UNIT LOAD. |
| MATERIAL HANDLING |
UPENDERS AND DUMPERS |
Specialized machines used to unloadmaterials handling carriers at a desired location. |
| MATERIAL HANDLING |
VACUUM LIFTER |
End of line attachment, a convenient means of handlingsheet stock of various kind (steel, non-ferrous metals, glass etc.) along with cartons, boxes etc. To lift a load, the vacuum cup is applied to itssurface, and the vacuum generator is set into
operation, creating a vacuumin the cup. |
| MATERIAL HANDLING |
VERTICAL LIFT |
A ferris-wheel type conveyor that moves goods fromthe receiving area to the checking area. |
| MATERIAL HANDLING |
WEIGHT OF A BODY |
Force which the body exerts on the support dueto the force of gravity. |
| MATERIAL HANDLING |
WINCH |
Equipment used for hauling, pulling, or hoisting e.g., rope andchain winches, stationary winches, mobile winches. |
| FRICTION LUBRICATION BEARINGS |
ABSOLUTE VISCOSITY |
Force per unit area required to move a surfaceat unit velocity, when it is separated by a fluid of unit thickness froma stationary surface. |
| FRICTION LUBRICATION BEARINGS |
ADDITIVES |
Chemical compounds used to alter the characteristics of lubricating oils. |
| FRICTION LUBRICATION BEARINGS |
ANGLE OF REPOSE |
The minimum inclination which a plane can haveconsistent with the body on it sliding down the plane by the force of gravity. It is the same as the friction angle. |
| FRICTION LUBRICATION BEARINGS |
ANTI CORROSION ADDITIVES |
Chemical compounds added tolubricating oil to reduce or prevent the chemical reaction of acids(formed by the oxidation of oil) which destroy some bearing materials,such as lead in lead copper bearings, used for crankshafts andconnecting rods of
engines. |
| FRICTION LUBRICATION BEARINGS |
ANTI OXIDATION ADDITIVES |
Chemical compounds added todecrease oxidation of the oil. These have a greater affinity for oxygenthan does the oil. |
| FRICTION LUBRICATION BEARINGS |
API HEAVY DUTY TYPE OIL |
Motor oil having oxidation stability,bearing corrosion preventive properties, and detergent-dispersantcharacteristics necessary to make it generally suitable for use in bothhigh speed diesel and gasoline engines under heavy duty serviceconditions. |
| FRICTION LUBRICATION BEARINGS |
API PREMIUM TYPE OIL |
Motor oil having the oxidation stability andbearing corrosion preventive properties necessary to make it generally suitable for use in internal combustion engines where operatingconditions are more severe than regular duty. |
| FRICTION LUBRICATION BEARINGS |
API REGULAR TYPE OIL |
Motor oil generally suitable for use in internalcombustion engines under moderate operating conditions. |
| FRICTION LUBRICATION BEARINGS |
BALL BEARING |
An antifriction bearing where the rolling elements arespherically shaped. Bearing consists of an inner and outer hardenedsteel races separated by a series of hardened steel balls. |
| FRICTION LUBRICATION BEARINGS |
BATH LUBRICATION |
Lubrication system in which the bearing containsa space filled with oil, which is in contact with a portion of the journal. |
| FRICTION LUBRICATION BEARINGS |
BEARING |
The part which transmits the load to the support and in sodoing, takes the friction caused by the moving parts in contact. Areaof the unit in which the contacting surface of a revolving part rests. |
| FRICTION LUBRICATION BEARINGS |
BEARING CAPS |
On an engine, caps held in place by bolts or nuts which,in turn, hold bearing halves in place. |
| FRICTION LUBRICATION BEARINGS |
BEARING CRUSH |
The additional height over a full half which is purposely manufactured in each bearing half. This ensures complete contact of the bearing back with the housing bore when the unit is assembled. |
| FRICTION LUBRICATION BEARINGS |
BEARING FAILURE |
Failure of a bearing due to continued flexing of thebearing surface from the applied load. |
| FRICTION LUBRICATION BEARINGS |
BEARING OIL CLEARANCE |
The space purposely provided betweenthe revolving shaft and the bearing in which it rotates. Through thisspace lubricating oil can flow. |
| FRICTION LUBRICATION BEARINGS |
BEARING PRELOAD |
Amount of static pressure exerted on a bearing or aset of bearings. Preload is usually adjusted by a threaded collar or shims. |
| FRICTION LUBRICATION BEARINGS |
BEARING PRELUBRICATOR |
A special tank attached to an airline whichsupplies oil at a predetermined and maintained pressure to the enginelubricating system when the engine is not operating. |
| FRICTION LUBRICATION BEARINGS |
BEARING SPACER |
A piece of tubing used between the two wheel bearinginner races to prevent unwanted bearing preload as the axle is tightened. |
| FRICTION LUBRICATION BEARINGS |
BEARING SPIN |
A type of bearing failure caused by lack of lubrication which overheats the bearing while the crankshaft is still in place. |
| FRICTION LUBRICATION BEARINGS |
BEARING SPREAD |
A purposely manufactured small extra distance acrossthe parting faces of the bearing half in excess of the actual diameter of the housing bore. |
| FRICTION LUBRICATION BEARINGS |
BYPASS FILTER |
An oil filter that constantly only filters a portion of theoil flowing through the engine or machine. |
| FRICTION LUBRICATION BEARINGS |
BOUNDARY FRICTION |
The resistance to relative motion when onesolid surface is caused to move tangentially over another, the surfacesbeing covered only by an adsorbed contamination film. |
| FRICTION LUBRICATION BEARINGS |
BOUNDARY LUBRICATION |
Type of lubrication in which the twosurfaces have between them a more or less complete layer of oil whichis only, at the most, a few molecules thick. |
| FRICTION LUBRICATION BEARINGS |
BUSHING |
A member that takes up space and usually allows movementat the attachment point. A one piece replaceable sleeve placed in abore to serve as a bearing surface. Bearing for shaft, spring shackle,piston pin etc. A metallic or synthetic lining for
a hole. |
| FRICTION LUBRICATION BEARINGS |
CARBON RESIDUE |
Determined (canradson carbon test) by evaporatingunder specified test conditions, a known weight of oil and weighingthe residue. |
| FRICTION LUBRICATION BEARINGS |
CENTIPOISE |
A unit of viscosity of a fluid used in figuring pressure drop etc. |
| FRICTION LUBRICATION BEARINGS |
CENTRIFUGAL OIL SLINGER |
Cup shaped centrifugal oil filtermounted to the end of the crankshaft. As the oil passes through theslinger, centrifugal force removes impurities that are heavier than oil. |
| FRICTION LUBRICATION BEARINGS |
COEFFICIENT OF FRICTION |
Ratio between the resistance due tofriction in the direction of motion and the load carried normal to theplane of motion. |
| FRICTION LUBRICATION BEARINGS |
COLLAR BEARING |
The collar which may be at any part of the length of the shaft, takes up the thrust produced along the axis of the shaft. |
| FRICTION LUBRICATION BEARINGS |
CRANKCASE DILUTION |
Dilution of lubricating oil in the oil pan by liquid gasoline seeping down the cylinder walls. Accumulation of unburned gasoline in the crankcase. |
| FRICTION LUBRICATION BEARINGS |
CRITICAL SPEED |
The limiting or critical speed corresponding to a givenpressure is that speed at which surface irregularities may intervene andso lead to seizure. |
| FRICTION LUBRICATION BEARINGS |
DETERGENTS |
Added to lubricating oils to improve the tendency of theoil to wash or cleanse the surface where oxidation products form, thereby resulting in a marked reduction in ring sticking, particularly in heavy duty service, and a marked improvement in
cleanliness of pistons. |
| FRICTION LUBRICATION BEARINGS |
DETERGENT OIL |
An oil which keeps particles and contaminants insuspension and has ability to neutralize acids resulting from combustionprocess. |
| FRICTION LUBRICATION BEARINGS |
DIRECT BEARING LUBRICATION |
An oil injection system whichfeeds undiluted oil to two stroke cycle engine main bearings and rodbig end bearings. |
| FRICTION LUBRICATION BEARINGS |
DRY SUMP-LUBRICATION |
In this system, oil is gravity fed to supply side of oil pump from the remote oil tank. After the oil has beenpumped through four stroke cycle engine, it is returned to the oiltank by return side of oil pump. |
| FRICTION LUBRICATION BEARINGS |
FILM LUBRICATION |
Type of lubrication in which the two metallicsurfaces are separated by a continuous film of liquid oil of measurablethickness which forces itself between them. |
| FRICTION LUBRICATION BEARINGS |
FIRE POINT OF OIL |
The temperature at which the oil vapour on theoil surface ignites and burns for at least five seconds, when heatedgradually, under specified test conditions. |
| FRICTION LUBRICATION BEARINGS |
FLASH POINT OF OIL |
The temperature at which a momentary flashappears on the heated oil surface when a test flame is applied, underspecified test conditions. It is a rough indication of the tendency of the oil to vapourize. |
| FRICTION LUBRICATION BEARINGS |
FOOT STEP BEARING |
The bearing at the foot of a vertical shaft. |
| FRICTION LUBRICATION BEARINGS |
FORCE FEED LUBRICATION |
A gear pump takes oil from the sumpand delivers it to the distributor ducts which connect with all themain bearings and camshaft bearings, from where the oil reaches thevarious parts that need lubrication. |
| FRICTION LUBRICATION BEARINGS |
FORCE OF FRICTION |
The least force acting parallel to the sliding surfacesof the bodies in contact, which will cause one body to slide over the other. |
| FRICTION LUBRICATION BEARINGS |
FRICTION |
The force which acts between two bodies at their surface of contact so as to resist their sliding on each other, due to roughness of the surfaces. Also called FRICTIONAL FORCES. |
| FRICTION LUBRICATION BEARINGS |
FRICTION ANGLE |
Angle which the resultant force makes with the normalto the plane when sliding begins. Also called LIMITING ANGLE OFRESISTANCE or LIMITING ANGLE OF REACTION. |
| FRICTION LUBRICATION BEARINGS |
FRICTION BEARINGS |
Bearings having sliding contact between themoving surfaces. Sleeve bearings, such as those used in connectingrods, are friction bearings. |
| FRICTION LUBRICATION BEARINGS |
GEAR OIL PUMP |
An oil pump with gear type teeth to move oil. |
| FRICTION LUBRICATION BEARINGS |
GREASE |
The term is applied to a mixture of mineral oil with fats thathave been saponified with an alkali. To this mixture fillers may or may not be added. |
| FRICTION LUBRICATION BEARINGS |
HYDRODYNAMIC LUBRICATION |
A condition that occurs when afilm of oil is constantly maintained between moving parts. |
| FRICTION LUBRICATION BEARINGS |
INNER RACE |
In a bearing assembly, the part that connects a rotatingshaft to the bearing. |
| FRICTION LUBRICATION BEARINGS |
JOURNAL |
In a shaft, the hardened polished area that is used with a bearing. |
| FRICTION LUBRICATION BEARINGS |
LAWS OF FRICTION |
The force of friction is (1) directly proportional to thepressure between the surfaces in contact, (2) independent of the extent of the surfaces in contact and (3) independent of the velocity of sliding. |
| FRICTION LUBRICATION BEARINGS |
LOAD MOTION |
Rolling or sliding motion found at the bearing surfaces. |
| FRICTION LUBRICATION BEARINGS |
LUBRICANT |
A fluid having two essential properties namely viscosity and oiliness, and used to reduce friction. |
| FRICTION LUBRICATION BEARINGS |
LUBRICATING FILM |
A thin coating of lubricant (oil) which preventscontact between moving parts. |
| FRICTION LUBRICATION BEARINGS |
LUBRICATING SYSTEM |
The system in the engine that supplieslubricating oil to the moving engine parts, to prevent actual contactbetween the moving surfaces. |
| FRICTION LUBRICATION BEARINGS |
LUBRICATION |
Use of lubricant (oil or grease) to reduce friction. |
| FRICTION LUBRICATION BEARINGS |
MAIN BEARINGS |
In the engine block, the bearings that support thecrankshaft. |
| FRICTION LUBRICATION BEARINGS |
MICHELL THRUST BEARING |
Type of tilting pad thrust bearing, thethrust supporting surface is divided into a number of segmental pads, which pivot on a radial edge at the back, and so automatically adjustthemselves to the required slope. |
| FRICTION LUBRICATION BEARINGS |
MULTIGRADE OIL |
An oil that retains its viscosity under varyingtemperature conditions better than a single weight oil. |
| FRICTION LUBRICATION BEARINGS |
ML OIL |
Oil for light automotive service. |
| FRICTION LUBRICATION BEARINGS |
MM OIL |
Oil for medium or average automotive service. |
| FRICTION LUBRICATION BEARINGS |
MS OIL |
Oil for severe automotive service. |
| FRICTION LUBRICATION BEARINGS |
MULTI WEIGHT OIL |
Type of oil that provides adequate lubrication atboth high and low temperatures. |
| FRICTION LUBRICATION BEARINGS |
MULTIPLE VISCOSITY OIL |
An engine oil which has a low viscosity when cold (for easier cranking and a higher ) viscosity when hot (toprovide adequate lubrication). |
| FRICTION LUBRICATION BEARINGS |
NEEDLE BEARING |
Antifriction bearing of the roller type, the rollers arevery small in diameter (needle sized). Rollers have a length over fourtimes greater than their diameter. |
| FRICTION LUBRICATION BEARINGS |
NEEDLE LUBRICATOR |
A needle which rests on a journal and exposed attop to the oil in an inverted glass bottle or reservoir, causes oil to flow slowly onto the journal, due to the vibration set up during shaft rotation. |
| FRICTION LUBRICATION BEARINGS |
OIL |
A liquid lubricant derived from crude oil used to provide lubricationbetween moving parts. |
| FRICTION LUBRICATION BEARINGS |
OIL CLEANER |
The filtering device through which oil passes, which filtersdirt and dust from the oil. |
| FRICTION LUBRICATION BEARINGS |
OIL CONSUMPTION |
Oil pumped into the combustion chamber of anengine by the piston and rings and burnt there in a given time. |
| FRICTION LUBRICATION BEARINGS |
OIL CONTROL RINGS |
The lower ring or rings on the piston of anengine, designed to prevent excessive amounts of oil from working upinto the combustion chamber. |
| FRICTION LUBRICATION BEARINGS |
OIL COOLER |
A small radiator through which the oil flows to lower itstemperature. |
| FRICTION LUBRICATION BEARINGS |
OIL DILUTION |
Dilution of oil in the crankcase of a SI engine, by leakageof liquid gasoline from the combustion chamber past the piston rings. |
| FRICTION LUBRICATION BEARINGS |
OIL FILTER |
Unit in the lubrication system through which oil passes toremove any impurities from oil. It may be paper, wire screen or rotordesigned to keep oil clean. |
| FRICTION LUBRICATION BEARINGS |
OIL LEVEL INDICATOR |
The indicator, usually called the dipstick, thatcan be removed to determine the level of oil in the crankcase of anengine or machine. |
| FRICTION LUBRICATION BEARINGS |
OIL PAN |
The detachable lower part of the engine made of sheet metal, which encloses the crankcase and acts as an oil reservoir. |
| FRICTION LUBRICATION BEARINGS |
OIL PASSAGES |
Holes and passages drilled in the block and in the engineparts through which oil flows. |
| FRICTION LUBRICATION BEARINGS |
OIL PRESSURE GAUGE |
An instrument used to measure and indicatethe amount of oil pressure in the lubrication system. |
| FRICTION LUBRICATION BEARINGS |
OIL PUMP |
In the lubricating system, the device that delivers oil from theoil pan to the various moving engine/machine parts. |
| FRICTION LUBRICATION BEARINGS |
OIL PUMP BLEEDING |
Removal of air from the supply line and thepump in a two stroke cycle oil injection system. |
| FRICTION LUBRICATION BEARINGS |
OIL PUMPING |
Passing of oil past the piston rings into the combustionchamber because of defective rings, worn cylinder walls etc. |
| FRICTION LUBRICATION BEARINGS |
OIL RESERVOIR |
That space in the base of the oil separator where oil isaccumulated prior to its return to the pump. |
| FRICTION LUBRICATION BEARINGS |
OIL SEAL |
A seal placed around a rotating shaft or other moving part, toprevent passage or escape of oil. |
| FRICTION LUBRICATION BEARINGS |
OIL SEAL AND SHIELD |
Two devices used to control oil leakage pastthe valve stem and guide into the ports or the combustion chamber. |
| FRICTION LUBRICATION BEARINGS |
OIL SPILL RING |
Collars or oil throw rings put on the rotating shaft,prevent oil leakage along the shaft, utilizing the increase of centrifugalforce with the increase of diameter. |
| FRICTION LUBRICATION BEARINGS |
OIL STRAINER |
A wire mesh screen placed at the inlet end of the oilpump pickup tube to prevent dirt and other large particle from enteringthe oil pump. |
| FRICTION LUBRICATION BEARINGS |
OUTER RACE |
In a roller/ball bearing assembly, the stationary part thatsupports the rotating load on the bearing. |
| FRICTION LUBRICATION BEARINGS |
OXIDIZED OIL |
Oil that has been chemically combined with oxygen asa result of excessive heat, oil agitation, and exposure to combustioncontaminants. |
| FRICTION LUBRICATION BEARINGS |
PAD LUBRICATION |
A part of the bearing surface upon which there isno pressure is dispensed with, and its place is taken by a soft pad, which is kept saturated with lubricant. |
| FRICTION LUBRICATION BEARINGS |
PICKUP SCREEN |
A screen in the oil pan that prevents any large particlesfrom entering the oil pump. |
| FRICTION LUBRICATION BEARINGS |
PIVOT BEARING |
Pivot portion (flat or conical) which is on the end of a shaft, that takes up the thrust produced along the axis of the shaft. |
| FRICTION LUBRICATION BEARINGS |
PLAIN BEARING |
A one or two piece assembly consisting of a hard metalbacking piece with a softer metal mated to it. |
| FRICTION LUBRICATION BEARINGS |
PLUNGER OIL PUMP |
An oil pump that uses a piston or plunger andcheck valves to move oil. |
| FRICTION LUBRICATION BEARINGS |
POUR POINT OF OIL |
The temperature at which the oil will not flow when cooled under specified conditions, due to formation of wax. |
| FRICTION LUBRICATION BEARINGS |
PREMIX |
Two stroke cycle engine lubrication is provided by oil, mixed with fuel in the fuel tank. |
| FRICTION LUBRICATION BEARINGS |
PRESSURE RELIEF VALVE |
A spring loaded valve used to regulate thepressure in the lubrication system. |
| FRICTION LUBRICATION BEARINGS |
PRESSURIZED FEED OIL SYSTEM |
A type of engine lubricating systemthat makes use of an oil pump to force oil through tubes and passagesto the various engine parts requiring lubrication. |
| FRICTION LUBRICATION BEARINGS |
PROFILOMETER |
Instrument used to measure the surface irregularities. |
| FRICTION LUBRICATION BEARINGS |
RING LUBRICATION |
Two loose rings carried by the journal rotation,being driven by frictional contact with the journal, dip into an oilbath and carry oil to the top of the journal so as to flow over thesurface of the journal through oil grooves in the bearing, and
finally return to the bath below. |
| FRICTION LUBRICATION BEARINGS |
ROLLER BEARING |
An antifriction bearing consisting of hardened steelinner and outer races, separated by hardened steel rollers, which aretwo or three times as wide as their diameter. |
| FRICTION LUBRICATION BEARINGS |
ROLLING FRICTION |
The force resisting the motion when a body rollson a surface. |
| FRICTION LUBRICATION BEARINGS |
ROTARY OIL PUMP |
An oil pump which uses an inner and outer rotorto move oil. |
| FRICTION LUBRICATION BEARINGS |
SCHIELE’S PIVOT |
A pivot bearing on a shaft, designed to give uniform wear in the direction of the axis with uniform pressure, the coefficientof friction being assumed to be constant. |
| FRICTION LUBRICATION BEARINGS |
SCRAPER RING |
A piston ring that assists in compression and wipes off the excess oil from the cylinder walls. |
| FRICTION LUBRICATION BEARINGS |
SEAL |
A material, shaped around a shaft, used to close off the operatingcompartment of the shaft, preventing oil leakage. |
| FRICTION LUBRICATION BEARINGS |
SEIZING |
The phenomenon in which the metal surfaces adhere and then tearowing to relative motion, caused by the attraction between molecules onopposite sides of the common surface between two elements of a bearing. |
| FRICTION LUBRICATION BEARINGS |
SERVICE RATING |
For lubricating oils used in engines, a designation thatindicates the type of service for which the oil is best suited. |
| FRICTION LUBRICATION BEARINGS |
SHIM (bearing) |
A strip of copper or similar material used under a bearingcap, for example, to increase bearing clearance. |
| FRICTION LUBRICATION BEARINGS |
SKIMMING |
Using a machine to remove oil or scum from the surface of the water. |
| FRICTION LUBRICATION BEARINGS |
SLUDGE |
Accumulation in oil pan, containing water, dirt and oil, sludgeis very viscous and tends to prevent lubrication. |
| FRICTION LUBRICATION BEARINGS |
SPLASH FEED OIL SYSTEM |
A type of engine lubricating system thatdepends on the splashing of oil for lubrication of moving parts. Theengine is enclosed, and the crankcase contains oil into which the cranksdip and splash as they rotate, throwing the oil over the various
bearings. |
| FRICTION LUBRICATION BEARINGS |
STATICAL FRICTION |
Friction at starting from rest, and this is greaterthan the friction of motion and depends on the hardness of the bodiesand the length of time during which they have been in contact. |
| FRICTION LUBRICATION BEARINGS |
SUMP |
A system for storing oil, either in the crankcase (wet sump) or in aseparate tank (dry sump). |
| FRICTION LUBRICATION BEARINGS |
SYNTHETIC OIL |
Oil made from material other than petroleum. |
| FRICTION LUBRICATION BEARINGS |
SYPHON LUBRICATOR |
The unit in which the oil stored in a cup abovea journal, is delivered slowly to the bearing through a wick which actsas a syphon. |
| FRICTION LUBRICATION BEARINGS |
TAPERED ROLLER BEARING |
An antifriction bearing where the rollingelement is similar to a roller bearing, however it has a taper along itsaxis, allowing it to accept axial loads in one direction. |
| FRICTION LUBRICATION BEARINGS |
THICK FILM LUBRICATION |
Lubrication arrangement wherein thereis no metal to metal contact. Also called PERFECT LUBRICATION. |
| FRICTION LUBRICATION BEARINGS |
THIN FILM LUBRICATION |
Type of lubrication that occurs when thecondition of bearing operation reduce the thickness of the oil filmsufficiently to make the rubbing of the bearing surfaces a nearpossibility. Oiliness of the lubricant is important in this type of lubrication. |
| FRICTION LUBRICATION BEARINGS |
THRUST BEARING |
In the engine, the main bearing has thrust faces which prevent excessive endwise movement of the crankshaft. |
| FRICTION LUBRICATION BEARINGS |
VALVE STEM SEAL or SHIELD |
A device placed on or surrounding thevalve stem to reduce the amount of oil which can get on the stem andthereby work its way down into the combustion chamber. |
| FRICTION LUBRICATION BEARINGS |
VARNISH |
A build up of oxidized oil or fuel. |
| FRICTION LUBRICATION BEARINGS |
VISCOSITY |
Resistance of oil to flow. The thickness of an oil is determinedby its rate of flow, a thick oil has a greater viscosity than a thin oil.Unit of viscosity is centipoise. |
| FRICTION LUBRICATION BEARINGS |
VISCOSITY INDEX |
A measure of the change of viscosity with temperatureof an oil compared with two reference oils having the same viscosity at210°F one of naphthenic base and the other of paraffinic base. |
| FRICTION LUBRICATION BEARINGS |
VISCOSITY INDEX IMPROVERS |
Additives added to an oil, to reducethe change of viscosity with increase in temperature. |
| FRICTION LUBRICATION BEARINGS |
VISCOSITY RATING |
An oil classification based on the time it takes foran amount of oil to flow through a capillary tube, under specifiedconditions, the higher the rating, the thicker the oil. |
| FRICTION LUBRICATION BEARINGS |
WARNING LIGHT |
A light on the instrument or control panel that turnson to warn of low oil pressure. |
| FRICTION LUBRICATION BEARINGS |
WORK OF FRICTION |
Product of the frictional force and the distancethrough which it moves. |
| THERMODYNAMICS |
ABSOLUTE TEMPERATURE |
The temperature of a substance measuredabove absolute zero. |
| THERMODYNAMICS |
ABSOLUTE ZERO TEMPERATURE |
Temperature at which all molecularmotion ceases, according to the kinetic theory of gases. A point whichhas been determined on the thermodynamic scale (by theoreticalconsiderations) beyond which a further decrease in temperature isinconceivable.
This is equal to , 459.6° on the fahrenheit scale and ,273.1° on the centigrade scale. |
| THERMODYNAMICS |
ABSOLUTE TEMPERATURE SCALES |
Used for calculating changes inrefrigerant vapour pressures. |
| THERMODYNAMICS |
ADIABATIC EXPANSION or COMPRESSION |
Expansion orcompression where the temperature rises during compression and fallsduring expansion without any loss of heat to the cylinder walls orabsorption of heat from the walls. |
| THERMODYNAMICS |
ADIABATIC HEAT DROP |
The heat energy released and theoretically capable of transformation into mechanical work during the adiabaticexpansion of unit weight of steam or other vapour or gas. |
| THERMODYNAMICS |
ADIABATIC SYSTEM |
is the system which is insulated from itssurroundings. In this system no heat transfer takes place i.e., either intothe system or out of the system. It can however exchange work withthe surroundings. |
| THERMODYNAMICS |
AIR |
A gas consisting principally of a mechanical mixture of 23.2 per cent(by weight) of oxygen, 65.5 per cent of nitrogen and 1.3 per cent of argon. |
| THERMODYNAMICS |
AIR STANDARD EFFICIENCY |
The thermal efficiency of an internalcombustion engine working on the appropriate air standard cycle. |
| THERMODYNAMICS |
AMBIENT TEMPERATURE |
Temperature (usually of the air)surrounding the operating equipment. |
| THERMODYNAMICS |
APPLIED THERMODYNAMICS |
Also called engineering thermodynamicsdeals with special applications such as energy transfer as power generation,refrigeration and, compression and expansion of gases and fluids. |
| THERMODYNAMICS |
ATKINSON CYCLE |
A working cycle for internal combustion engines, in which the expansion ratio exceeds the compression ratio, more efficientthan the Otto Cycle, but mechanically impracticable. |
| THERMODYNAMICS |
ATMOSPHERIC LINE |
A datum line drawn on an indicator diagram by allowing atmospheric pressure to act on the indicator piston ordiaphragm. |
| THERMODYNAMICS |
ATMOSPHERIC PRESSURE |
Force exerted by the weight of theatmosphere on every point with which it is in contact. It is generally taken as 1.03 kscm at sea level. |
| THERMODYNAMICS |
AVAGADRO’S LAW |
Equal volumes of different gases at the sametemperature and pressure contain the same number of molecules. |
| THERMODYNAMICS |
AVAILABLE ENERGY |
That portion of a quantity of heat which could betransformed into work by means of a reversible engine. |
| THERMODYNAMICS |
BASIC UNITS |
are length, mass, time, temperature and angle. |
| THERMODYNAMICS |
BLACK BODY |
A body which absorbs all the radiation falling on it i.e., has a non-reflecting surface. A black body emits the maximum amountof radiation possible at a given temperature, and the amount isproportional to the fourth power of the absolute temperature. |
| THERMODYNAMICS |
BOILING POINT |
The temperature at which a liquid boils for any givensurrounding atmospheric pressure. Now the saturation pressure of thevapour equals that of the atmosphere. |
| THERMODYNAMICS |
BOUNDARY |
is a real physical surface or an imaginary surface enclosingsome matter. The boundary may be a fixed one or a varying one. |
| THERMODYNAMICS |
BOYLE’S LAW |
The absolute pressure of a gas will vary inversely as thevolume, if the temperature remains constant. Or conversely, the volume will vary inversely as the absolute pressure, if the temperature remainsconstant. |
| THERMODYNAMICS |
BRAKE HORSE POWER |
Useful power available from an engine. Alsocalled SHAFT HORSE POWER. |
| THERMODYNAMICS |
CALORIE |
The heat per unit weight, one gram, required to raise thetemperature of water through one degree centigrade. |
| THERMODYNAMICS |
CELSIUS |
The scale of changes of temperature which uses 0 degree as thefreezing point and 100 degree as the boiling point for water at standardpressure. |
| THERMODYNAMICS |
CHARLE’S LAW |
At constant pressure, the volume of a gas is proportionalto its absolute temperature. At constant volume, the pressure isproportional to its absolute temperature. |
| THERMODYNAMICS |
CLOSED SYSTEM |
The system which will have boundaries across whichboth heat and work can penetrate, but no mass will be permitted tocross them. |
| THERMODYNAMICS |
Cp |
Specific heat at constant pressure-Heat to be supplied to raise thetemperature of 1 kg of gas through 1°C, the pressure being kept constant(in other words external work is done). |
| THERMODYNAMICS |
C v |
Specific heat at constant volume-Heat to be supplied to raise thetemperature of 1 kg of gas through 1°C, the volume being kept constant(in other words no external work is done). |
| THERMODYNAMICS |
COEFFICIENT OF LINEAR EXPANSION |
Amount of expansion perunit length, per degree rise in temperature. |
| THERMODYNAMICS |
COEFFICIENT OF PERFORMANCE OF A HEAT PUMP, COPHP |
Heat added to the hot body/work supplied. |
| THERMODYNAMICS |
COEFFICIENT OF PERFORMANCE OF A REFRIGERATOR,COPRef |
Heat removed from cold body/work supplied. |
| THERMODYNAMICS |
COEFFICIENT OF THERMAL CONDUCTIVITY |
The quantity of heat that will flow across a unit area in unit time if the temperaturegradient across this area is unity. |
| THERMODYNAMICS |
COLD |
A comparative lack of heat, indicating chillness. |
| THERMODYNAMICS |
COMPRESSED SOLID |
is a solid at a temperature below its saturationtemperature. |
| THERMODYNAMICS |
COMPRESSIBILITY FACTOR, Z |
is the factor introduced to modify the ideal gas equation Pv = RT, and to describe the behaviour of a realgas. Z = Pv/RT. |
| THERMODYNAMICS |
CONDENSATE |
The liquid formed by the condensation of a gaseous substance. |
| THERMODYNAMICS |
CONDENSATION |
The change of state of a substance from the gaseousto the liquid form. |
| THERMODYNAMICS |
CONDENSING |
The process of giving up latent heat of vapourization inorder to liquefy a vapour. |
| THERMODYNAMICS |
CONDUCTION |
Transfer of heat from one part of a material to anotheror to a material with which it is in contact. |
| THERMODYNAMICS |
CONDUCTIVITY |
The relative value of a material, as compared with astandard, in affording a passage through itself or over its surface for heat. |
| THERMODYNAMICS |
CONSTANT VOLUME PROCESS |
is one wherein a gas is heated (orcooled) in a fixed enclosed space (no change in volume occupied by thegas). There will be no workdone by the gas. The whole heat supplied will be stored in the form of internal energy. |
| THERMODYNAMICS |
CONSTANT PRESSURE PROCESS |
Also called isobaric process. Heatsupplied to a system exhibits as the change in enthalpy. |
| THERMODYNAMICS |
CONSTANT TEMPERATURE PROCESS |
Also called isothermalprocess. There is no change in temperature and hence internal energy and enthalpy remain constant. Heat supplied = work done. |
| THERMODYNAMICS |
CONVECTION |
Passage of heat from one point to another by means of agravity fluid circulation due to changes in density resulting from pickingup and giving up heat. Also transfer of heat to or from a fluid (liquid orgas) flowing over the surface of a body. |
| THERMODYNAMICS |
COSMIC RADIATION |
Radiation of many sorts, but mostly atomicnuclei (protons) with very high energies, originating outside the earth’satmosphere. |
| THERMODYNAMICS |
COUNTER FLOW HEAT EXCHANGER |
A heat exchanger in whichthe warm substance flows in the opposite direction to the flow of thecool substance. |
| THERMODYNAMICS |
CRITICAL STATE OF A SUBSTANCE |
is that state at which liquid andvapour coexist in equilibrium. At critical state, latent heat of evaporationbecomes zero. |
| THERMODYNAMICS |
CRITICAL PRESSURE |
The critical pressure of a vapour is the pressurerequired to liquefy it at the critical temperature and is the highest pressureon the temperature -pressure graph for saturated vapour. |
| THERMODYNAMICS |
CRITICAL TEMPERATURE |
Temperature of the vapour above whichno pressure, however high, will produce liquefaction. |
| THERMODYNAMICS |
CRITICAL VELOCITY |
The velocity above which fluid flow is turbulent. |
| THERMODYNAMICS |
CYCLIC PROCESS |
is a process (or a series of processes) which returns thesystem to the state it was before the process began. |
| THERMODYNAMICS |
DALTON’S LAW OF PARTIAL PRESSURES |
At a common temperature,a mixture of gases will exert on the sides of the vessel a total pressureequal to the sum of the pressures which each constituent would exertseparately if it alone occupied the vessel. |
| THERMODYNAMICS |
DERIVED UNITS |
are those derived from basic units, e.g., force, work,density etc. |
| THERMODYNAMICS |
DIMENSIONS |
are the properties by which the physical quantity of anobject may be described. |
| THERMODYNAMICS |
DRY BULB TEMPERATURE |
The actual temperature of air, as opposedto wet bulb temperature. |
| THERMODYNAMICS |
DRY STEAM |
Steam containing no moisture. It may be either saturated orsuperheated steam. |
| THERMODYNAMICS |
DRY SATURATED STEAM |
Saturated steam, as generated from water,that contains no moisture in suspension. |
| THERMODYNAMICS |
EFFICIENCY |
Ratio of the useful work performed by a prime mover tothe energy expended. In other words the output divided by the input. |
| THERMODYNAMICS |
ENERGY |
Stored work, that is the ability to do work. |
| THERMODYNAMICS |
ENTHALPY |
Name given to the total heat in the fluid at any temperature. |
| THERMODYNAMICS |
ENTROPY TEMPERATURE DIAGRAM |
In thermodynamics, the baseof a heat diagram, the area of which is heat units and the altitude of which is absolute temperature. |
| THERMODYNAMICS |
EQUIVALENT EVAPORATION |
Amount of water in kg. that would beevaporated from water at 100°C into steam at 100°C and 1.03 kscm,by the heat put into steam actually evaporated in one hour by 1 kg of fuel. |
| THERMODYNAMICS |
VAPORATION |
Process by which a liquid changes into a vapour as aresult of absorbing heat. |
| THERMODYNAMICS |
EVAPORATIVE CONDENSER |
Combines the principles of forcedcirculation convection currents with the ability of a vapourizing liquidto absorb heat. |
| THERMODYNAMICS |
EXTERNAL LATENT HEAT |
When vapourization takes place, the amountof heat required because of the work in pushing back the atmosphereto make room for the steam. |
| THERMODYNAMICS |
EXTRINSIC PROPERTIES |
Also called extensive properties, are thoseproperties which are dependent on the mass of the system. Examplesare volume, weight and total energy. |
| THERMODYNAMICS |
FACTOR OF EVAPORATION |
A quantity which when multiplied by the amount of steam generated at a given pressure from water at a giventemperature, gives the equivalent evaporation from and at 100°C. |
| THERMODYNAMICS |
FLOW WORK |
The product PV (pressure and specific volume) representsflow work in a steady flow system. |
| THERMODYNAMICS |
FORCED CONVECTION |
Circulation of the fluid is made positive by some mechanical means such as a pump for water or a fan for hot gases. |
| THERMODYNAMICS |
FORCED DRAFT COOLING TOWER |
Cools water by mechanically forcing air through the water spray in the tower. |
| THERMODYNAMICS |
FREE EXPANSION |
is a process wherein a fluid from a pressure chamberexpands into a vacuum chamber through an orifice of large dimensions. |
| THERMODYNAMICS |
FREEZING POINT |
The temperature at which water turns into ice (0°Cat sea level). |
| THERMODYNAMICS |
FROM AND AT 100°C |
In boiler operation, it is an evaporation that would be the equivalent of the actual evaporation when the feed waterenters the boiler at 100°C and steam is formed at 100°C, at standardatmospheric pressure. |
| THERMODYNAMICS |
FROSTING EVAPORATORS |
Those evaporators which always operateat temperature below 0°C. |
| THERMODYNAMICS |
FUNDAMENTAL DIMENSIONS |
Internationally accepted units aretime, length, mass, force and temperature. |
| THERMODYNAMICS |
GAUGE PRESSURE |
Pressure above or below atmospheric pressure. |
| THERMODYNAMICS |
GAY LUSSAC LAW |
The volume of a gas will vary directly as the absolutetemperature, if the pressure remains constant. |
| THERMODYNAMICS |
GASES |
are substances in which the molecules move freely and exist in anunbound state. Gases can be compressed easily because of the large empty space available between the molecules. |
| THERMODYNAMICS |
HEAT |
A form of energy and is due to the motion of the molecules of which all substances are composed. Unit of heat is kilocalorie. |
| THERMODYNAMICS |
HEAT OF COMPRESSION |
Increase of temperature brought about by compression of air or air fuel mixture. |
| THERMODYNAMICS |
HEAT OF CONDENSATION |
The heat that is removed per kilogram of vapour to cause it to condense. It has the same numerical value as theheat of vapourization. |
| THERMODYNAMICS |
HEAT ENGINE |
It is an energy transformer. It transforms heat energy intomechanical energy and render the latter available for doing useful work. |
| THERMODYNAMICS |
HEAT PUMP |
is a device which extracts heat from low temperaturesurroundings and sends it to a high temperature body, while operating in acycle. Heat pump maintains a body or system at a temperature higher thanthe temperature of the surroundings, with the
work supplied to it. |
| THERMODYNAMICS |
HEAT SINK |
A means for disposing of unwanted heat, usually by using itto increase the temperature of water, which is then run to waste. |
| THERMODYNAMICS |
HEAT SOURCE |
Supplier of heat to the working agent of a heat engine-afraction of the heat supplied being changed into work. |
| THERMODYNAMICS |
HEAT TRANSFER |
Movement of heat energy from one place to another(warmer to cooler portion). |
| THERMODYNAMICS |
HETEROGENEOUS SYSTEM |
s a system which is made of more thanone phase. |
| THERMODYNAMICS |
HOMOGENEOUS SYSTEM |
is a system consisting of a single phase. |
| THERMODYNAMICS |
HYPERBOLIC PROCESS |
is one in which a gas is heated in such a way thatat any instant its pressure multiplied by its volume remains constant. |
| THERMODYNAMICS |
IDEAL GAS |
is one which will obey all the gas laws, under all conditionsof temperature and pressure. For an ideal gas, the internal energy andenthalpy are functions of temperature alone. |
| THERMODYNAMICS |
INDICATED HORSE POWER |
The actual power developed or used within a cylinder as calculated from the indicator diagram. |
| THERMODYNAMICS |
INERT GAS |
A gas which under normal conditions does not react with orcombine with other substances for example, argon, helium, neon,krypton, xenon. |
| THERMODYNAMICS |
INTERNAL ENERGY |
is the energy arising from the motion and fromconfiguration of the internal particles (atoms and molecules). It is theenergy stored in the gas and is used for raising its temperature.v= CvT.,?u= Cv(T2, T1). |
| THERMODYNAMICS |
INTRINSIC PROPERTIES |
also called intensive properties, are thoseproperties which are independent of the mass of the system. Exampleare pressure, temperature and density. |
| THERMODYNAMICS |
ISENTROPIC PROCESS |
which is called reversible adiabatic process isone in which no heat is supplied and work done is at the expense of internal energy. Law followed is Pv ?= constant. |
| THERMODYNAMICS |
ISOLATED SYSTEM |
is a special case of the closed system which will notbe influenced by the surrounding. In this system, no mass transfer, noenergy transfer occur. Work and heat cannot cross the boundary of thesystem. |
| THERMODYNAMICS |
ISOTHERM |
The line drawn through points or areas of similar temperature. |
| THERMODYNAMICS |
ISOTHERMAL EXPANSION or COMPRESSION |
The expansion orcompression of a gas at constant temperature, that is with the gastemperature remaining the same during the process. |
| THERMODYNAMICS |
JOULE’S LAW OF INTERNAL ENERGY |
The internal energy of a givenquantity of a gas depends only on the temperature of the gas. Astemperature changes, the internal energy also changes. |
| THERMODYNAMICS |
KELVIN PLANK STATEMENT |
It is impossible to construct an engineundergoing a cyclic process, which will convert all the heat supplied toit into an equivalent amount of work. |
| THERMODYNAMICS |
KILO PASCALS (kPa) |
Measurement of pressure in the metric system 1kilo pascal is approximately equal to 6.895 pounds per square inch. |
| THERMODYNAMICS |
KINETIC ENERGY |
Energy due to momentum, that is the energy of amoving body, which is equivalent to saying, dynamic inertia. The kineticenergy of a moving body is the work which the body is capable of performing against a resistance before it is brought to rest,
that is, itequals the work which has brought it from its state of rest to its actualvelocity. |
| THERMODYNAMICS |
LATENT HEAT |
The quantity of heat required to change the state orcondition under which a substance exists without changing itstemperature. |
| THERMODYNAMICS |
LATENT HEAT OF FUSION |
The amount of heat which must be addedto one kilogram of material to change its state from a solid to a liquidor which must be subtracted from one kilogram of a liquid to change itto a solid. |
| THERMODYNAMICS |
LATENT HEAT (internal) |
The amount of heat that the water will absorb(latent heat minus heat equivalent of work of evaporation), at the boilingpoint without a change in temperature. |
| THERMODYNAMICS |
LATENT HEAT OF VAPOURIZATION |
Amount of heat to be addedto (or subtracted from) one kilogram of the refrigerant to cause it tovapourize (or condense). Also, the amount of heat energy in a gas whichis in addition to that found in the liquid at the same temperature. |
| THERMODYNAMICS |
LAW OF CONSERVATION OF ENERGY |
States that energy can neitherbe created nor destroyed. However, it can be stored in various formsand can be transferred from one form to another. In other words, thetotal energy of a body or substance always remains constant. |
| THERMODYNAMICS |
LIQUIDS |
are substances in which the molecules are loosely bounded. A definite volume is maintained by the bond forces, but can change theshape according to the shape of the container. |
| THERMODYNAMICS |
MATTER |
General name for all material substances, gaseous, liquid orsolid forming the earth and its surrounding atmosphere. |
| THERMODYNAMICS |
MEAN EFFECTIVE PRESSURE |
The difference between the mean forwardpressure and the mean back pressure acting on a moving piston duringa cycle of operation. |
| THERMODYNAMICS |
MECHANICAL CYCLE |
is one wherein during the various processes, theproperties of the working fluid change. |
| THERMODYNAMICS |
MECHANICAL EFFICIENCY |
Ratio of mechanical energy available atthe brake or flywheel to the mechanical energy put into the movingmechanism at the piston of the engine. |
| THERMODYNAMICS |
MECHANICAL EQUIVALENT OF HEAT |
1 kcal is equal to 1427 Mtkgof mechanical energy. |
| THERMODYNAMICS |
MOLE OF GAS |
Quantity of gas, the weight of which is equal to themolecular weight in pounds. |
| THERMODYNAMICS |
MOLAR HEAT |
is the quantity of heat required to raise the temperatureof one mole of a substance through one degree. |
| THERMODYNAMICS |
MOLLIER DIAGRAM |
A graphical representation of the properties of afluid in which enthalpy is plotted as abscissa and pressure as ordinate. |
| THERMODYNAMICS |
NATURAL CONVECTION |
Circulation or the transfer of fluid due to adifference in density resulting from temperature changes. |
| THERMODYNAMICS |
NATURAL DRAFT COOLING TOWER |
Cooling tower which cools water by moving air at low velocities through the tower, without theaid of any mechanical means. |
| THERMODYNAMICS |
NON FLOW PROCESS |
It is the one in which there is no mass interactionacross the system boundaries during the process. This occurs in a closed system. |
| THERMODYNAMICS |
NTP |
The normal temperature and pressure refer to the conditions of temperature 0°C (273 K) and pressure of 760 mm of mercury. |
| THERMODYNAMICS |
OPEN SYSTEM |
It has no closed boundary, but has one or more openings.Fluid may enter or leave the system, it undergoes thermodynamic process, while moving through the system. |
| THERMODYNAMICS |
PARALLEL FLOW HEAT EXCHANGER |
A heat exchanger in whichthe warm and cool fluids flow in the same direction but separated fromone another. |
| THERMODYNAMICS |
PERFECT GAS |
Gas which behaves in accordance with the gas law PV =MRT, where P-absolute pressure, V-volume, M-mass, T-absolutetemperature and R-constant for the particular gas depending on itsmolecular weight. |
| THERMODYNAMICS |
PERPETUAL MOTION MACHINE OF FIRST KIND |
is a machine which will give continoues work without taking any energy from othersystem or surrounding. |
| THERMODYNAMICS |
PERPETUAL MOTION MACHINE OF SECOND KIND |
is a machine which abstracts heat continuously from a reservoir and converts itcompletely into work or 100% efficient engine. |
| THERMODYNAMICS |
PERPETUAL MOTION MACHINE OF THIRD KIND |
is applied todevices that, once set in motion, continue in motion for an indefinitely long time without slowing down. |
| THERMODYNAMICS |
PHASE OF A SUBSTANCE |
It refers to a quantity of matter which ishomogeneous or uniform throughout its physical structure and chemicalcomposition. |
| THERMODYNAMICS |
PHASE DIAGRAM |
is a pressure temperature diagram showing more thanone of the saturation lines (liquid-vapour, liquid-solid, solid-vapourand other of a pure substance). |
| THERMODYNAMICS |
PATH FUNCTIONS |
depend on which path is followed between thestates 1 and 2. Examples are heat, work, internal energy and entropy. |
| THERMODYNAMICS |
POINT FUNCTIONS |
are the properties of a system at a state. |
| THERMODYNAMICS |
POLYTROPIC PROCESS |
follows the law Pvn= constant. In this process,heat is supplied in such a way there is some work done by the gas (i.e.,during expansion) and there is also a change in internal energy. |
| THERMODYNAMICS |
PROCESS |
It is the transformation of a system from one state to another. |
| THERMODYNAMICS |
PROPERTY OF A FLUID |
is its characteristic such as pressure, volume,temperature, internal energy, enthalpy and entropy which are measurabledirectly or indirectly. |
| THERMODYNAMICS |
POTENTIAL ENERGY |
Energy possessed by a substance by virtue of itsposition with respect to a datum. |
| THERMODYNAMICS |
POWER |
The rate at which work is done, i.e., 1 HP = 4500 Mtkg/ minute. |
| THERMODYNAMICS |
PRESSURE |
As defined by Rankine-A force of the nature or a thrust,distributed over a surface measured as kg/sqcm. |
| THERMODYNAMICS |
PURE SUBSTANCE |
is any material of single chemical structure or of homogeneous and invariant chemical structure. |
| THERMODYNAMICS |
QUALITY OF STEAM |
Refers indirectly the amount of water orunevaporated moisture in steam. |
| THERMODYNAMICS |
QUASI-STATIC PROCESS |
is a process which is carried out in such amanner that at every instant the system departs only infinitesimally from the thermodynamic equilibrium state. |
| THERMODYNAMICS |
R |
An experimentally determined constant which is equal to the mechanical work done by the expansion of unit weight of a perfect gas at a constantpressure while heat is added to increase its temperature through onedegree. |
| THERMODYNAMICS |
RADIATION |
Continuous form of interchange of heat energy from onebody to another by means of electromagnetic waves without causing achange in the temperature of the medium between the two bodiesinvolved. These energy waves may be reflected, penetrate the
materialor be absorbed. |
| THERMODYNAMICS |
REAL GAGES |
are those that deviate from the characteristic gas relation,Pv= RT. |
| THERMODYNAMICS |
REFLECTIVITY |
Ability of a material to reflect radiant heat. |
| THERMODYNAMICS |
REFRIGERATOR |
Maintains a body at a temperature lower than that of the surroundings while operating in a cycle. External work is suppliedfor realizing it. |
| THERMODYNAMICS |
RENAULT’S LAW |
The two specific heats of a gas Cv and C pdo not change with the temperature and pressure. |
| THERMODYNAMICS |
REVERSIBLE PROCESS |
Any process performed so that the system andall its surroundings can be restored to their initial states by performingthe process in reverse.” |
| THERMODYNAMICS |
RUDOLF CLAUSIUS STATEMENT |
Heat can flow from a hot body toa cold body unaided, but it cannot flow from a cold body to a hotterbody without the expenditure or supply of mechanical work. |
| THERMODYNAMICS |
SATURATION TEMPERATURE |
Temperature of the liquid surfacecorresponding to the pressure of the vapour in contact with it. |
| THERMODYNAMICS |
SATURATED PHASE |
is any phase of a substance existing under saturatedconditions, wherein two or more phases of a pure substance can existtogether in equilibrium. |
| THERMODYNAMICS |
SATURATED STEAM |
Steam, as it is generated from water, just barely on the steam side of the fence. |
| THERMODYNAMICS |
SATURATED VAPOUR |
Vapour whose temperature and pressure are inaccordance with the temperature vapour pressure relationship for theparticular substance. Vapour in contact with its liquid is saturated. |
| THERMODYNAMICS |
SECONDARY DIMENSIONS |
are those quantities which are describedusing primary dimensions. |
| THERMODYNAMICS |
SEMI-PERFECT GAS |
is one which follows the ideal gas relations withspecific heats being functions of temperature. |
| THERMODYNAMICS |
SENSIBLE HEAT |
Heat energy that causes a change of temperature of asolid, liquid or gas, changes the speed with which molecules move. When unit weight of a substance is heated by one degree to gain, thesensible heat is equal to the specific heat. |
| THERMODYNAMICS |
SENSIBLE HEAT OF WATER |
Heat added to one kg of water from 0°Cto the boiling point at the given pressure. Also called ENTHALPY OF WATER. |
| THERMODYNAMICS |
SOLIDS |
are substances in which the molecules are closely packed and may not move freely. Molecules can only vibrate about a mean position.Very large force is required to change the shape of a solid substance. |
| THERMODYNAMICS |
SPECIFIC HEAT |
The ratio of the amount of heat which will raise thetemperature of a given weight of a substance by one degree to theamount of heat which will produce the same raise in temperature in thesame weight of water. |
| THERMODYNAMICS |
SPECIFIC HEAT OF SUPERHEATED STEAM |
Amount of heatrequired to raise the temperature of superheated steam, at constantpressure by 1°C. |
| THERMODYNAMICS |
SPECIFIC PROPERTY |
is the value of any extensive property divided by the mass of the system. This is an intensive property, e.g., specific volume,specific weight. |
| THERMODYNAMICS |
SPHEROIDAL STATE |
The condition of a liquid, as water, when beingthrown on a highly heated metal surface, it rolls about in spheroidaldrops or masses, at a temperature several degrees below ebullition and without actual contact with the heated surface. This phenomenon
isdue to the repulsive force of heat and the intervention of a cushion of vapour. |
| THERMODYNAMICS |
STATE OF A SYSTEM |
refers to the unique condition of the system atany particular moment. The state is indicated by the properties such astemperature, volume, pressure, internal energy, enthalpy and entropy.These are point functions. |
| THERMODYNAMICS |
STEADY FLOW SYSTEM |
is an open system in which the rate of masstransfer and energy transfer remain constant with respect to time. |
| THERMODYNAMICS |
STEAM |
The vapour of water. It is a colourless expansive invisible gas. |
| THERMODYNAMICS |
STEAM TABLES |
Tables containing values of various properties of saturatedsteam such as boiling point, specific volume, sensible heat, latent heatand total heat calculated for a wide range of pressures. |
| THERMODYNAMICS |
STEADY FLOW PROCESS |
is a flow process wherein the conditions within the control volume do not vary with time. |
| THERMODYNAMICS |
STORED ENERGY |
is the energy which is contained by the medium withinthe system boundaries. Examples are potential energy and internal energy. |
| THERMODYNAMICS |
STP |
The standard temperature and pressure refer to the conditions of temperature 15°C (288 K) and pressure 760 mm of mercury. |
| THERMODYNAMICS |
SUBCOOLED LIQUID |
is a liquid existing at a temperature lower thanits saturation temperature (or, in other words, at a pressure higher thanits saturation pressure). |
| THERMODYNAMICS |
SUPERHEAT |
Addition of heat to a fluid after it has completely vapourized.In this situation, temperature increases but pressure does not. |
| THERMODYNAMICS |
SUPERHEATED VAPOUR |
Vapour removed from contact with its liquidand at a temperature higher than that which corresponds to its pressureas indicated by the temperature , pressure vapour relationship for thatparticular substance. |
| THERMODYNAMICS |
SUPERHEATED STEAM |
Steam at a temperature higher than thesaturation temperature for the given pressure. |
| THERMODYNAMICS |
SURROUNDING |
is everything outside the boundary which may influencethe behaviour of the system. Transfer of mass and energy may takeplace between the system and boundary. |
| THERMODYNAMICS |
SYSTEM IN EQUILIBRIUM |
means it does not undergo any change onits own accord. |
| THERMODYNAMICS |
SYSTEM IN CHEMICAL EQUILIBRIUM |
is an isolated system whichmay contain substances that can react with one another chemically, butall these chemical reactions cease after a certain time. |
| THERMODYNAMICS |
SYSTEM IN MECHANICAL EQUILIBRIUM |
is an isolated system, whenleft to itself, may change with time all its properties such as pressure,elastic stress etc., but these changes may cease after a certain time. |
| THERMODYNAMICS |
SYSTEM IN THERMAL EQUILIBRIUM |
is an isolated system, whereinthere may be variations of temperature from point to point, but thesevariations vanish after a certain time. |
| THERMODYNAMICS |
SYSTEM IN THERMODYNAMIC EQUILIBRIUM |
is one which is inmechanical equilibrium, thermal equilibrium and chemical equilibrium. |
| THERMODYNAMICS |
TEMPERATURE |
A measure of the intensity of heat in a substance withreference to a fixed reference point and of its ability to pass its heat intoanything at a lower temperature than itself. |
| THERMODYNAMICS |
THERMAL CONDUCTIVITY |
Ability to a material to allow the passageof heat. Stated as the number of kilocalories that can flow in one hourthrough a block of material, one square meter in area and one meterthick with one degree centigrade difference in temperature between
theopposite surfaces. |
| THERMODYNAMICS |
THERMAL GRADIENT |
The slope of the temperature curve producedby measuring the temperature at various points across a body or heatedsection. |
| THERMODYNAMICS |
THERMODYNAMICS |
Study of energy, heat and work, properties of media employed and the processes involved. |
| THERMODYNAMICS |
THERMODYNAMIC SYSTEM |
is any space or any matter or group of matter within a prescribed boundary, to which attention is directed for the purpose of analysis. |
| THERMODYNAMICS |
THERMODYNAMIC CYCLE |
is said to occur when a working fluid of asystem undergoes a number of operations and processes which take place ina certain order and finally return the fluid to the initial state itself. |
| THERMODYNAMICS |
THERMODYNAMICS,ZEROTH LAW |
That two systems having equaltemperatures with a third system also have equal temperatures witheach other. |
| THERMODYNAMICS |
THERMODYNAMICS,FIRST LAW |
In ordinary processes, matter canneither be created nor destroyed. Energy can take different forms butcannot be created or destroyed. |
| THERMODYNAMICS |
THERMODYNAMICS,SECOND LAW |
There is a definite limit to theamount of mechanical energy that can be obtained from heat energy. |
| THERMODYNAMICS |
THERMOELECTRIC INDICATORS |
Temperature measuringinstruments which operate on the principle that minute quantities of electric current may be produced by heating two dissimilar metals whichare joined at one end. |
| THERMODYNAMICS |
THERMOSTAT |
Operating control which reacts to temperature. |
| THERMODYNAMICS |
THROTTLING PROCESS |
is one that occurs when a gas or vapour isexpanded through an aperture of minute dimensions, such as a slightly opened valve or a narrow throat. In this process, no heat transfer takesplace, no work is done. |
| THERMODYNAMICS |
TOTAL HEAT |
Sum of the sensible heat and latent heat. Also called enthaply of steam or vapour. |
| THERMODYNAMICS |
TRANSIT ENERGY |
is that energy which crosses the system boundaries.Examples are heat, work, velocity energy and electrical energy. |
| THERMODYNAMICS |
TRIPPLE POINT |
The temperature and pressure at which a substance canexist simultaneously in solid, liquid and vapour forms. |
| THERMODYNAMICS |
TUBE AND FIN RADIATOR CORE |
One type of radiator core,consisting of tubes to which cooling fins are attached, water flowsthrough the tubes. |
| THERMODYNAMICS |
ULTRAVIOLET RADIATION |
Radiation of short wave length or highfrequency, just below the X-ray range, which come from the SUN andthe electric arc. These may cause eye damage and skin burns unless thecorrect precautions are followed. |
| THERMODYNAMICS |
UNIVERSE |
is the system and the surrounding put together. |
| THERMODYNAMICS |
UNSTEADY FLOW SYSTEM |
is an open system in which the rate of mass transfer and energy transfer vary with respect to time. |
| THERMODYNAMICS |
VACUUM |
A space devoid of matter, that is, a space in which the pressureis zero absolute. |
| THERMODYNAMICS |
VAPOUR |
A gaseous condition of a substance near its point of liquefaction. |
| THERMODYNAMICS |
VAPOURIZATION |
Change of state from liquid to vapour or gas. |
| THERMODYNAMICS |
VAPOUR PRESSURE |
Pressure exerted by the vapour of any particularliquid on the containing vessel, as a result of the molecules near itssurface freeing themselves from the attraction of their neighbours andflying off into space. Its magnitude depends solely on
the temperatureof the liquid surface. |
| THERMODYNAMICS |
VOLUMETRIC EFFICIENCY |
The ratio of the volume of gas actually pumped by a compressor or pump to the theoretical displacement of the piston of the compressor or pump or reciprocating IC engine. |
| THERMODYNAMICS |
WEIGHT |
It refers to the force exerted by gravity on the given mass. Weightis proportional to mass, but the proportionality factor is different atdifferent locations. |
| THERMODYNAMICS |
WET STEAM |
Steam containing intermingled moisture, mist or spray. |
| THERMODYNAMICS |
WORK |
The overcoming of resistance through a certain distance by theexpenditure of energy. |
| THERMODYNAMICS |
WORKING AGENT |
Substance in a heat engine which alternately takesin and rejects heat, expanding and contracting when doing so, andovercoming the resistance opposing these changes. |
| THERMODYNAMICS |
ZEROTH LAW OF THERMODYNAMICS |
States that if two systemsare separately in equilibrium with a third system, then the two systems will be in thermal equilibrium with each other. |
| FUELS AND COMBUSTION |
ACCELERATOR |
Device for rapid control of the speed of an engine, forquick opening and closing of the throttle which regulates the quantity of air fuel mixture into the engine cylinder. |
| FUELS AND COMBUSTION |
ACHESON GRAPHITE |
That made from coke in an electric furnance. |
| FUELS AND COMBUSTION |
ACTIVATED CARBON |
A highly absorbent form of carbon used toremove odors and toxic substances from gaseous emissions or to removedissolved organic matter from waste water. |
| FUELS AND COMBUSTION |
ADDITIVE |
A substance added to fuel, or oil or grease which improvesthe properties of the same. |
| FUELS AND COMBUSTION |
ADIABATIC FLAME TEMPERATURE |
The maximum possibletemperature attained by the products of reaction, when the reactiongoes to completion and all the heat released is used to heat up theproducts. |
| FUELS AND COMBUSTION |
AERATION TEST BURNER |
Apparatus by which the combustioncharacteristics of commercial gases can be correlated and calibrated. |
| FUELS AND COMBUSTION |
AEROSOL |
A particle of solid or liquid matter that can remain suspendedin the air because of its small size. Particulates under 1 micron in diameterare called aerosols. |
| FUELS AND COMBUSTION |
AFTER BOIL |
Boiling of the fuel in the carburettor or coolant in theengine immediately after the engine is stopped. |
| FUELS AND COMBUSTION |
AFTER BURNING |
In an internal combustion engine, the persistence of the combustion process beyond the period proper to the working cycle, i.e., into the expansion period. |
| FUELS AND COMBUSTION |
AFTER BURNER |
In an automobile engine, a type of exhaust manifoldthat burns the hydrocarbon and carbon monoxide remaining in theexhaust gas. |
| FUELS AND COMBUSTION |
AIR ASPIRATOR SYSTEM |
An air injection system using a valve openedand closed by pulses in the exhaust system. |
| FUELS AND COMBUSTION |
AIR FUEL MIXTURE |
Air and fuel travelling to the combustion chamberafter being mixed by the carburettor. |
| FUELS AND COMBUSTION |
AIR FUEL RATIO |
Ratio (by weight) between air and fuel that makes upengine fuel mixture. |
| FUELS AND COMBUSTION |
AIR INJECTION SYSTEM |
A system which injects air into the exhaustmanifold or thermal reactor so that the combustion of the carbonmonoxide and unburned hydrocarbons in the exhaust can be completed. |
| FUELS AND COMBUSTION |
AIR MASS METERING |
In some fuel injection systems, fuel metering iscontrolled primarily by engine speed and the amount of air actually entering the engine. |
| FUELS AND COMBUSTION |
AIR POLLUTION |
Contamination of earths atmosphere by various naturaland man made pollutants such as smoke, gases, dust etc. |
| FUELS AND COMBUSTION |
ALCOHOL |
Volatile liquid fuel consisting wholly or partly, of alcohol,able to withstand high compression ratios without detonation. |
| FUELS AND COMBUSTION |
ANTHRACITE COALS |
Slow burning coals which yield very little ash,moisture and less than 10 per cent volatiles, generally used in closed stoves. |
| FUELS AND COMBUSTION |
ANILINE POINT |
The lowest temperature at which an oil is completely miscible with an equal volume of aniline.” |
| FUELS AND COMBUSTION |
ANTIBACKFIRE VALVE |
Valve used in air injection reaction cexhaustemission control system to prevent backfiring during the periodimmediately following sudden decleration. |
| FUELS AND COMBUSTION |
ANTIKNOCK |
In engine fuels, that property which opposes knocking i.e., autoignition. |
| FUELS AND COMBUSTION |
ANTIKNOCK COMPOUND |
An additive put into gasoline to suppressknocking or detonation e.g., Tetra ethyl lead. |
| FUELS AND COMBUSTION |
ANTIPERCOLATOR |
Device for venting vapours from main dischargetube, or well, of a carburettor. |
| FUELS AND COMBUSTION |
APIEZON OILS |
The residue of almost zero vapour pressure left by vacuumdistillation of petroleum products. |
| FUELS AND COMBUSTION |
API GRAVITY |
The American Petroleum Institute (API) has establishedthe formula for calculating the specific gravity of a fuel or oil as Degree API= ((141.5/specific gravity at 60/60 degree F),131.5). The symbol60/60 degree F is interpreted as the ratio of
the weight of a given volumeof oil at 60 degree F to the weight of the same volume of water at 60degree F. |
| FUELS AND COMBUSTION |
ASH |
An inorganic non-combustible residue obtained by combustion of an oil or fuel in the presence of air. |
| FUELS AND COMBUSTION |
ASH AND SLAG |
Impurities that do not burn and usually troublesomeelements in coal fired boilers. |
| FUELS AND COMBUSTION |
ASH FREE BASIS |
When fuels are delivered on an ash free basis, it meansthat the percentage of the ash has been deducted and the otherconstituents have their percentages recalculated on 100 per cent total without the ash. |
| FUELS AND COMBUSTION |
ATMOSPHERIC GAS BURNER SYSTEM |
A natural draught burnerinjector, in which the momentum of a gas stream projected from anorifice into the injector throat inspirates from the atmosphere a part of the air required for combustion. |
| FUELS AND COMBUSTION |
ATOMIZATION |
The spraying of a liquid through a nozzle so that theliquid is broken into a very fine mist. |
| FUELS AND COMBUSTION |
ATOMIZER |
A nozzle through which oil fuel is sprayed into the combustionchamber of an oil engine or boiler furnace. It breaks up the fuel into afine mist so as to ensure good dispersion and combustion. |
| FUELS AND COMBUSTION |
AUTOIGNITION |
The self-ignition or spontaneous combustion of a fuel when introduced into the heated charge in the cylinder of a compressionignition engine. |
| FUELS AND COMBUSTION |
AUTOMATIC CHOKE |
A carburettor choke device (valve) thatautomatically positions itself in accordance with the carburettor needsor engine temperature. |
| FUELS AND COMBUSTION |
BACKFIRE (exhaust system) |
Passage of unburned air fuel mixture intothe exhaust system where it is ignited by some hot spot and causes aloud explosion. |
| FUELS AND COMBUSTION |
BALANCED DRAFT |
A boiler using both forced draft fan and induceddraft fan, can be regulated and balanced in the amount of air and fluegases handled so that the furnace pressure is almost atmospheric. |
| FUELS AND COMBUSTION |
BAGASSE |
A fuel produced as a by product of the abstraction of juicefrom sugar cane. The dried cane (fibrous residue) is usually fed into aspecially designed furnance by means of overfeed stokers. |
| FUELS AND COMBUSTION |
BENCH |
The name applied to a complete plant for the manufacture of coal gas. Also called RETORT BENCH. |
| FUELS AND COMBUSTION |
BENZOL |
Crude benzene, used as a motor spirit, generally mixed withpetrol, and valued for its antiknock properties. |
| FUELS AND COMBUSTION |
BIOGAS |
Obtained by fermentation in the sewage disposal system, or by fermentation of cattle waste, farm waste etc. |
| FUELS AND COMBUSTION |
BIOSPHERE |
The portion of earth and its atmosphere that can support life. |
| FUELS AND COMBUSTION |
BLAST FURNANCE GAS |
A gas of low calorific value, a by product of iron smelting due to burning of coke in the furnance with limited air,used for preheating the blast, for steam raising etc. It may contain up to30% carbon monoxide. |
| FUELS AND COMBUSTION |
BLAST MAIN |
The main blast air pipe supplying air to a furnace. |
| FUELS AND COMBUSTION |
BLOW BY |
Leakage of unburned air fuel mixture and some burned gasespast the piston rings into the crankcase during the compression andcombustion strokes. |
| FUELS AND COMBUSTION |
BLOW TORCH EFFECT |
In gas or oil burning furnaces, when the flameimpinges on any surface, such as a tube or refractory wall, that surface isburned as by a blow torch. This is a combustion condition to be avoidedas destructive to the surface. |
| FUELS AND COMBUSTION |
BLUE WATER GAS |
A mixture of approximately equal proportions of carbon monoxide and hydrogen made by passing steam over incandescentcoke in special generators. |
| FUELS AND COMBUSTION |
BOILING POINT |
The temperature at which a liquid begins to boil. |
| FUELS AND COMBUSTION |
BOMB CALORIEMETER |
An apparatus used for determining the calorificvalues of fuels. The bomb consists of a thick walled steel vessel in whicha weighed quantity of fuel is ignited in an atmosphere of compressedoxygen. The bomb is immersed in a known volume of water,
from therise of temperature of water the calorific value is calculated. |
| FUELS AND COMBUSTION |
BOTTLED GAS |
LPG (liquefied petroleum gas)compressed into strongmetal containers. Gas when confined in tank, under pressure, is in theliquid form. |
| FUELS AND COMBUSTION |
BRIQUETS |
Coherent masses of uniform size made by the application of pressure to any powdery material placed in a suitable mould with or without a binder. |
| FUELS AND COMBUSTION |
BUTANE |
A hydrocarbon gas formed synthetically, by the action of zinc orethyl iodide. Petroleum gas, that is liquid, when under pressure. Oftenused as engine fuel in trucks. |
| FUELS AND COMBUSTION |
CALORIE |
The amount of heat required to raise one gram of water through1°C i.e., from 17 to 18°C. Calorie is unit of heat. |
| FUELS AND COMBUSTION |
CALORIFIC INTENSITY |
The maximum flame temperature attained when the fuel is burnt. |
| FUELS AND COMBUSTION |
CALORIFIC VALVE |
The heat value of a fuel, expressed in either BTU perpound or CHU per pound or kilocalories/kg. The amount of heatproduced by burning unit weight of fuel. |
| FUELS AND COMBUSTION |
CALORIEMETER |
Measuring instrument used to determine the amountof heat produced when a substance is burned, also friction and chemicalchange produce heat. |
| FUELS AND COMBUSTION |
CARBON |
One of the non-metallic elements constituting fuel andlubricating oil. |
| FUELS AND COMBUSTION |
CARBON DEPOSIT |
A black, hard or soft deposit left on engine parts by the combustion of fuel. Carbon forms on pistons, rings, plugs, valveheads etc., inhibiting their action. |
| FUELS AND COMBUSTION |
CARBONDIOXIDE |
A colourless, odourless gas which results whenhydrocarbon or carbon is burned completely. |
| FUELS AND COMBUSTION |
CARBONIZE |
Building up of carbon on objects such as spark plug, pistonhead etc., of an engine. |
| FUELS AND COMBUSTION |
CARBON MONOXIDE |
A colourless, odourless, tasteless, poisonous gasfound in engine exhaust. Formed when carbon or hydrocarbons areburned incompletely. |
| FUELS AND COMBUSTION |
CARBURETED WATER GAS |
An artificial gas formed by passing steamthrough a bed of glowing coke and thereafter enriching the gas so formed with petroleum vapour. |
| FUELS AND COMBUSTION |
CATALYTIC CONVERTER |
A muffler like device for use in an exhaustsystem that converts harmful gases in the exhaust into harmless gasesby promoting a chemical reaction between a catalyst and the pollutants. |
| FUELS AND COMBUSTION |
CETANE NUMBER |
Rating of ignition quality or performance characteristicof diesel fuel. A high cetane number fuel ignites more easily at lowertemperature than a low cetane number fuel. |
| FUELS AND COMBUSTION |
CHARCOAL |
Product obtained by heating wood out of contact with air. |
| FUELS AND COMBUSTION |
CHARCOAL CANISTER |
A container filled with activated charcoal usedto trap gasoline vapour from the fuel tank and carburettor while theengine is off. |
| FUELS AND COMBUSTION |
CHEMICAL CHANGE |
A change which alters the composition of themolecules of a substance producing new substances with new properties. |
| FUELS AND COMBUSTION |
CLOUD POINT |
The temperature of a liquid (fuel or lubricant) at whicha haze or a cloud first appears in a sample of oil, when cooled in aprescribed manner. |
| FUELS AND COMBUSTION |
COAL |
A firm, brittle, sedimentary, combustible rock derived from vegetabledebries which have undergone a complex series of chemical and physicalchanges during the course of many million years. |
| FUELS AND COMBUSTION |
COAL GAS |
A fuel formed by the distillation of coal, usually in a retort ora coke oven. |
| FUELS AND COMBUSTION |
COEFFICIENT OF HAZE |
A measurement of visibility interference inthe atmosphere. |
| FUELS AND COMBUSTION |
COKE |
A fused cellular porous structure that remains after the free moistureand the major portion of the volatile matter have been distilled from coal. |
| FUELS AND COMBUSTION |
CAKING COALS |
Coals that become soft under the usual furnacetemperatures and merge into undesirable masses of coke. The coal thatbecomes soft, melts and solidifies into a more or less solid mass whichfurther hardens on heating out of contact with air. |
| FUELS AND COMBUSTION |
COLLOIDAL FUEL |
A mixture of fuel oil and powdered coal. |
| FUELS AND COMBUSTION |
COMBUSTION |
Process involved during quick burning. Release of chemical energy into heat energy occurs during combustion. |
| FUELS AND COMBUSTION |
COMBUSTION EFFICIENCY |
is the ratio of the (heat) energy liberatedto that which could be liberated under ideal conditions. Quantity of CO2 and H2O in the exhaust indicate energy liberated, whereas thequantity of H2, CO and CH4indicate unliberated energy. |
| FUELS AND COMBUSTION |
CRACKING |
The process of breaking of heavy molecules into lighterhydrocarbons. |
| FUELS AND COMBUSTION |
COMPRESSION IGNITION |
Ignition of fuel through the heat of compression as in a diesel engine. |
| FUELS AND COMBUSTION |
COMPRESSED NATURAL GAS |
usually assumes the from of compressedmethane, and is suitable for obtaining ultra low emissions fromcombustion engines. Soot production is virtually zero. |
| FUELS AND COMBUSTION |
COMPOUND |
A combination of two or more ingredients mixed together. |
| FUELS AND COMBUSTION |
CONSTANT PRESSURE COMBUSTION |
Combustion which occurs without a change in pressure. In an engine, this is obtained by the slowerrate of burning than with constant volume combustion. |
| FUELS AND COMBUSTION |
CRUDE OIL |
Petroleum as it comes from the oil well (raw or refined state).It forms the basis of gasoline, engine oil, diesel oil, kerosene etc. |
| FUELS AND COMBUSTION |
DETONATION |
An uncontrolled instantaneous second explosion in aspark ignition engine, after the spark occurs, with excessively rapidburning of a portion of the compressed air fuel mixture (end chargealmost exploding) resulting in a spark knock, or pinging
noise. |
| FUELS AND COMBUSTION |
DIESEL INDEX |
A rating of fuel according to its ignition qualities. Thehigher the diesel index number, the better the ignition quality of the fuel. |
| FUELS AND COMBUSTION |
DIMETHYLETHER |
is a synthetic product with a high cetane number,producing little soot and reduced nitrogen oxide when combusted indiesel engines. |
| FUELS AND COMBUSTION |
DISTILLATION |
Heating a liquid, and then catching and condensing thevapours given off by the heating process. |
| FUELS AND COMBUSTION |
DRAFT |
The differential pressure in a furnace to ensure the flow of gasesout of the furnace and flow of air into the furnace. |
| FUELS AND COMBUSTION |
DUST |
Fine grain particles light enough to be suspended in air. |
| FUELS AND COMBUSTION |
ECOSPHERE |
The layer of earth and troposphere inhabited by or suitablefor existence of living organisms. |
| FUELS AND COMBUSTION |
EFFLUENT |
Waste material discharged into the environment, treated oruntreated. |
| FUELS AND COMBUSTION |
EGR SYSTEM |
Exhaust gas recirculation system. It sends part of the exhaustgas back through the engine by way of the carburettor or intake manifold, which reduces the amount of NO x that is formed by an engine. |
| FUELS AND COMBUSTION |
ELECTOSTATIC PRECIPITATOR |
An air pollution control device in which solid or liquid particulates in a gas stream are charged as they passthrough an electric field and precipitated on a collection surface. |
| FUELS AND COMBUSTION |
ELUTRIATION |
A process of separating lighter particles from heavierparticles by washing solid waste with a slowly moving upward streamof fluid that carried the lighter particles with it. |
| FUELS AND COMBUSTION |
EMISSION CONTROLS |
A term applied to any device or modificationadded onto, or designed into a motor vehicle for the purpose of controlling a source of air pollution emission. |
| FUELS AND COMBUSTION |
ETHANOL |
Ethyl alcohol produced by east fermentation of a variety of carbohydrates such as saccharin (sugar canes, sugar beets, molasses andfruit juices), starch (cereals and potatoes) or cellulose (wood waste,sulphite liquor). |
| FUELS AND COMBUSTION |
ETHYL GASOLINE |
Gasoline to which ethyl fluid has been added toimprove its resistance to knocking. Slows down burning rate and thereby creates a smooth pressure curve that will allow the gasoline to be usedin high compression engines. |
| FUELS AND COMBUSTION |
EVAPORATIVE EMISSION CONTROL SYSTEM |
A system whichprevents the escape of gasoline vapours from the fuel tank orcarburettor float bowl to the atmosphere while the engine is off.The vapours are stored in a canister, or in the crankcase until theengine is started. |
| FUELS AND COMBUSTION |
EXCESS AIR |
Air present in the cylinder over and above that which istheoretically necessary to burn the fuel. |
| FUELS AND COMBUSTION |
EXHAUST GAS |
The products of combustion coming out from an internalcombustion engine. |
| FUELS AND COMBUSTION |
EXHAUST GAS ANALYZER |
A device for sampling the exhaust gas froman engine to determine the amounts of pollutants in the exhaust gas.This determines combustion efficiency. |
| FUELS AND COMBUSTION |
FLAME DETECTOR |
A device that monitors the flame in a furnace thatis burning oil, gas, or pulverized coal fuel. Failure of the flame results ina signal and the actuation of various protective controls on the fuel feedto prevent an explosion. |
| FUELS AND COMBUSTION |
FLAME SAFEGUARD SYSTEM |
An arrangement of flame detectionsystem, interlocks and relays, which will sense the presence of a properflame in a furnace and cause fuel to be shut off to the furnace if ahazardous (improper flame or combustion) condition develops. |
| FUELS AND COMBUSTION |
FLASH POINT |
It is the temperature at which the quantities of vapour which a combustible fuel emits into the atmosphere are sufficient toallow a spark to ignite the vapour air mixture above the fluid. |
| FUELS AND COMBUSTION |
FLUE DUST |
Solid particles (smaller than 100 microns) carried in theproducts of combustion. |
| FUELS AND COMBUSTION |
FLUE GAS ANALYZER |
Device which measures the percentages of volumeof carbondioxide, carbon monoxide and oxygen in the flue gas of a boiler. |
| FUELS AND COMBUSTION |
FLY ASH |
Combustion ash so fine that is carried up and into the atmosphereby the movement of the flue gases. It can become neighbourhoodnuisance by settling on surfaces in the area after it looses its velocity. |
| FUELS AND COMBUSTION |
FOG |
Suspended liquid particles formed by condensation of vapour. |
| FUELS AND COMBUSTION |
FORCED DRAFT FAN |
The fan that pushes or forces air into the furnace,usually at a pressure higher than atmospheric pressure. |
| FUELS AND COMBUSTION |
FRACTIONAL DISTILLATION |
A process of separation on the molecularbasis or on the basis of the boiling point of various fractions. |
| FUELS AND COMBUSTION |
FREE LIQUIDS |
Liquids which readily separate from the solid portion of a waste under ambient temperature and pressure. |
| FUELS AND COMBUSTION |
FUEL |
The substance that is burned to produce heat and create motion inan engine or heat substances. Any combustible substance. |
| FUELS AND COMBUSTION |
FUEL CALORIEMETER |
A meter (also called oxygen bomb) to determinethe heating value of 1 kg of fuel by burning a sample of the fuel undercontrolled conditions. |
| FUELS AND COMBUSTION |
FUGITIVE DUST |
Particulate matter composed of soil which isuncontaminated by pollutants resulting from industrial activity. Fugitivedust may include emissions from haul roads, wind erosion of exposedsoil surfaces and soil storage piles, and other activities
in which soil iseither removed, stored, transported, and redistributed, also solid airborne particulate matter emitted from any source other than through astack. |
| FUELS AND COMBUSTION |
FUME |
Any kind of noxious vapour arising from a process of combustion orchemical reactions. Includes smoke, odorous materials, metallic dust. |
| FUELS AND COMBUSTION |
FUME AFTERBURNERS |
Units designed to consume combustible fumesby means of a direct fired combustion chamber through which thefumes must pass on their way to the stack and the atmosphere. |
| FUELS AND COMBUSTION |
FURNACE EXPLOSION |
The ignition and almost instantaneous explosionof highly inflammable gas, vapour or dust accumulated in a boiler setting. |
| FUELS AND COMBUSTION |
GAS |
A state of matter, neither solid nor liquid which has neither definiteshape nor definite volume. Air is a mixture of several gases. |
| FUELS AND COMBUSTION |
GASOLINE |
A liquid blend of hydrocarbons, obtained from petroleumcrude oil, used as the fuel for most automobile SI engines. |
| FUELS AND COMBUSTION |
GRINDABILITY |
A descriptive term of a characteristic of coal that isimportant to pulverized coal systems. |
| FUELS AND COMBUSTION |
HEATING VALUE OF A FUEL |
The heat liberated by the complete andrapid burning of a fuel per unit weight or volume of the fuel. Alsocalled calorific value of the fuel. |
| FUELS AND COMBUSTION |
HIGHER HEAT VALUE |
A standard recommended by the ASME, thehigher heat value of a fuel includes the heat value of the hydrogen in thefuel. The heating value indicated by a fuel caloriemeter. |
| FUELS AND COMBUSTION |
HIGH TEST GASOLINE |
A term referring to the octane rating of a fuel. A high test fuel has a high octane rating. |
| FUELS AND COMBUSTION |
HOGGED FUEL |
Wood that has been chipped and shredded, usually by a machine called a “hog”. |
| FUELS AND COMBUSTION |
HYDROCARBON |
A compound made of elements of hydrogen andcarbon atoms. Gasoline, diesel oil are blends of different hydrocarbonsrefined from crude oil. |
| FUELS AND COMBUSTION |
IGNITION TEMPERATURE |
The temperature at which the heat that isgenerated by the reaction between air and fuel vapour, is faster than thatis lost to the surroundings, and combustion thus becomes self propelling.Below this point, the gas air mixture will not burn freely. |
| FUELS AND COMBUSTION |
IGNITION QUALITY OF DIESELS |
is indicated by cetane number. Itis the percentage of cetane by volume, in a mixture of cetane (C16H34)and alpha methyl naphthalene which will exhibit the same ignitioncharacteristic of the fuel under test when tested in a standard engine,under
a set of standard test conditions. |
| FUELS AND COMBUSTION |
INCINERATION |
The controlled process in which the combustible solid,liquid or gaseous wastes are burned and changed into non-combustiblegases. |
| FUELS AND COMBUSTION |
INCINERATOR |
Any furnace used in the process of burning waste for theprimary purpose of reducing the volume of the waste by removingcombustible matter. |
| FUELS AND COMBUSTION |
INDUCED DRAFT FAN |
The fan that draws the gases out of the furnaceby creating a partial vacuum on the suction side of the fan. |
| FUELS AND COMBUSTION |
INFRARED GAS ANALYZER |
A non-dispersive infrared gas analyzer usedto measure very small quantities of the pollutants contained in theexhaust gas. |
| FUELS AND COMBUSTION |
KEROSENE |
This petroleum product is a liquid fuel having an averagelatent heat of vapourization of 105-110 BTU lb and the specific heatof 0.50, sometimes called COAL OIL. |
| FUELS AND COMBUSTION |
KNOCK (engine) |
In an engine, a rapping or hammering noise resultingfrom excessively rapid burning of the compressed air fuel charge. |
| FUELS AND COMBUSTION |
LIGNITE |
A coal of high moisture content and low calorific value, generally less than 8300 BTU/lb. May require predrying before being used as afuel. |
| FUELS AND COMBUSTION |
LIQUID ASH REMOVAL SYSTEM |
An arrangement of piping by whichmolten ash is removed continuously or intermittently, as desired, fromthe bottom of a furnace. The operating medium is usually compressedair with pneumatic controls. |
| FUELS AND COMBUSTION |
LIQUEFIED PETROLEUM GAS (LPG) |
A gas fuel that is stored inliquid form and is converted into gas as it leaves the storage tank by apressure regulator that steps down the storage pressure on the liquid atthe tank outlet and thereby permits the liquid to assume its normalgaseous
state at the existing temperature and reduced pressure. |
| FUELS AND COMBUSTION |
LONG FLAME BURNER |
An oil or gas burner in which the mixture of fuel and air is delayed long enough to produce a long flame from theburner nozzle. Can be a source of trouble if the flame impinges oneither refractory or tube surfaces. |
| FUELS AND COMBUSTION |
LOWER HEATING VALUE |
Net heat liberated per kg of fuel after theheat necessary to vapourize and superheat the steam formed from thehydrogen (and from the fuel) has been liberated. |
| FUELS AND COMBUSTION |
LOW LEAD FUEL |
Gasoline which is low in tetraethyl lead (approximately 0.5 gm per gallon). |
| FUELS AND COMBUSTION |
MECHANICAL DRAFT |
Draft produced artificially by means of forcedor induced draft fans. |
| FUELS AND COMBUSTION |
METHANOL |
Methyl alcohol produced from coal by its liquifaction, by pyrolysis, or by its reaction with high pressure hydrogen. |
| FUELS AND COMBUSTION |
NATURAL DRAFT |
Draft produced by a chimney, by a column of hotgases existing inside the chimney. |
| FUELS AND COMBUSTION |
NATURAL GAS |
Gas obtained from petroleum mines. |
| FUELS AND COMBUSTION |
NOx |
Oxides of nitrogen, a byproduct of combustion within thecombustion chamber at high temperature and under heavy load. A basicair pollutant. |
| FUELS AND COMBUSTION |
NOxCONTROL |
Any type of device, or system, used to reduce the amountof NOx produced by an engine. |
| FUELS AND COMBUSTION |
NO LEAD FUEL |
Gasoline to which there has been no intentional additionof lead compounds. |
| FUELS AND COMBUSTION |
OCTANE RATING |
The measure of antiknock property of gasoline. Thehigher the octane rating, (OCTANE NUMBER), the more resistantthe gasoline is to knocking or detonation and better the quality: Highercompression engines require higher octane gas. |
| FUELS AND COMBUSTION |
OCTANE NUMBER OF A FUEL |
is the percentage by volume of iso-octane in a mixture of iso-octane (C8H18) and n-heptane (C7H16) which will exhibit the same antiknock characteristic of the fuel undertest when tested in a standard CFR variable compression ratio engine,under
a set of standard test conditions. |
| FUELS AND COMBUSTION |
OIL BURNER |
Any device wherein oil fuel is vapourized or so calledatomized and mixed with air in proper proportion for combustion. |
| FUELS AND COMBUSTION |
PARTICULATES |
Small particles of lead and other substances occurring assolid matter in the exhaust gas. |
| FUELS AND COMBUSTION |
PEAT |
A substance of vegetable origin always found more or less saturated with water in swamps and bogs. |
| FUELS AND COMBUSTION |
PETROLEUM |
Crude oil as it comes out of the ground, which consists of 83-87 per cent carbon, and 10-14 per cent hydrogen, plus traces of oxygen, nitrogen and sulphur. From the crude oil, gasoline, diesel,lubricating oil and other products are refined. |
| FUELS AND COMBUSTION |
PHOTOCHEMICAL SMOG |
The result of sunlight reacting withhydrocarbons and nitrogen oxides in the atmosphere. |
| FUELS AND COMBUSTION |
PING |
The sound resulting from sudden auto ignition of the airfuel chargein a SI engine combustion chamber. Characteristic sound of detonation. |
| FUELS AND COMBUSTION |
POLLUTANTS |
Any gas or substance in the exhaust gases from the engineor that evaporates from the fuel tank or carburettor. These gases orsubstances add to the pollution of our atmosphere. |
| FUELS AND COMBUSTION |
POLLUTION |
The presence of matter or energy whose nature, location orquantity produces undesirable environmental effects. |
| FUELS AND COMBUSTION |
POSITIVE CRANKCASE VENTILATION |
PCV system-A crankcaseventilating system which produces the circulation of air through thecrankcase, thus clearing it of water vapour, unburned hydrocarbons,and blow by, the air passes into the intake system of the engine andhence into the combustion
chambers where they are burnt. |
| FUELS AND COMBUSTION |
POT TYPE BURNER |
It is a hot plate burner in which the fuel oil dropsinto a hot plate and vapourizes. |
| FUELS AND COMBUSTION |
POUR POINT OF FUEL |
is the temperature at which crystals begin toappear and the fuel flow will be interrupted, as the fuel is being cooled. |
| FUELS AND COMBUSTION |
PREI-GNITION |
Ignition of air fuel mixture in the SI engine cylinder (by any means) before the (ignition) spark occurs at the spark plug terminals. |
| FUELS AND COMBUSTION |
PRIMARY AIR |
The air mixed with the fuel at or in the burner. It ensuresinstant combustion as the fuel enters the furnace. |
| FUELS AND COMBUSTION |
PRIMARY POLLUTANT |
A pollutant emitted directly from a polluting source. |
| FUELS AND COMBUSTION |
PROPANE |
A type of LPG that is liquid below ,42°C at atmosphericpressure. |
| FUELS AND COMBUSTION |
PULSATION |
A panting of the flames in a furnace, indicating cyclic andrapid changes in the pressure in the furnace. |
| FUELS AND COMBUSTION |
PURGE |
The evacuation of air or any other designated gas from the duct line,pipe line, container or furnace. Purging may be done in some instancessimply by the use of a fan or blower, in others by driving out the air or gasby means of an inert gas, such
as nitrogen, under high pressure. |
| FUELS AND COMBUSTION |
RADIOACTIVE |
Substances that emit rays either naturally or as a result of scientific manipulation. |
| FUELS AND COMBUSTION |
REFUSE |
A term generally used for all solid waste materials. |
| FUELS AND COMBUSTION |
RETORT |
A trough or channel built into an underfeed stoker through which the stoker ram pushes green coal into the fire. The coal enters thefire from below, hence the name “underfeed”. |
| FUELS AND COMBUSTION |
ROTARY BURNER |
One in which the oil entering at the center of a rotary cup is whirled around very rapidly until the oil is thrown away fromthe cup. By centrifugal force it mixes with air and ignites. |
| FUELS AND COMBUSTION |
SAFETY CONTROLS |
Devices that guard against (1) overpressure leadingto explosions from the water side or steam side, (2) overheating of metal parts, possibly also leading to explosion in a fired boiler, (3) fireside explosions (furnace explosions) due to uncontrolled
combustiblemixtures on the firing side. |
| FUELS AND COMBUSTION |
SECONDARY AIR |
Air introduced into a furnace above and around theflames as may be necessary to promote combustion. This air is in additionto the primary air which enters either as a mixture with fuel or as blastunderneath a stoker. |
| FUELS AND COMBUSTION |
SHREDDER |
A machine used to break up waste materials into smallerpieces by cutting or tearing. |
| FUELS AND COMBUSTION |
SCRUBBER |
A device that uses a liquid spray to remove aerosol and gaseouspollutants from an air stream. |
| FUELS AND COMBUSTION |
SLACK |
A coal of fine size, often screenings, maximum size is not likely toexceed 62.5 mm. |
| FUELS AND COMBUSTION |
SLAG TAP FURNACE |
A furnace for burning pulverized fuel in whichthe ash puddles in the bottom of the furnace in a molten state and isremoved periodically or continuously, depending on the design of thesystem, while still in the molten condition. |
| FUELS AND COMBUSTION |
SMOG |
A term coined from smoke and fog. This is applied to the fog likelayer that hangs over many areas under certain atmospheric conditions.Smog is compounded from smoke, moisture and numerous chemicals which are produced by combustion and from numerous
natural andindustrial processes. |
| FUELS AND COMBUSTION |
SPECIFIC GRAVITY |
A measure of the weight per unit volume of aliquid as compared with the weight of an equal volume of water. |
| FUELS AND COMBUSTION |
SURFACE IGNITION |
Ignition of air fuel mixture in the combustionchamber produced by hot metal surfaces or heated particles of carbon. |
| FUELS AND COMBUSTION |
SYNTHETIC FUELS |
Fuels such as ethanol and butanol derived fromcoal, and hydrogen from water.TETRA ETHYL LEAD |
| FUELS AND COMBUSTION |
TORCH |
Combustible material on a metal rod, such as oil soaked rags,used to light up oil and gas burners. The torch is extinguished by beingplunged into a prepared receptacle. |
| FUELS AND COMBUSTION |
TUYERES |
Castings appearing as components of underfeed stokers anddesigned to admit air to the green coal moving through the retorts. |
| FUELS AND COMBUSTION |
VAPOURIZATION |
To change a liquid into a vapour, often by the additionof heat. |
| FUELS AND COMBUSTION |
VAPOURIZING BURNER |
A burner in which the fuel oil is vapourizedby heating in a retort. It may be a mixing or non mixing type. |
| FUELS AND COMBUSTION |
VAPOUR LOCK |
A condition in the fuel system in which gasoline hasvapourized and turned to bubbles in the fuel line or fuel pump, so thatthe fuel delivery to the carburettor of a SI engine is prevented or retarded. |
| FUELS AND COMBUSTION |
VOLATILITY |
refers to the ease with which a liquid vapourizes. A liquid which vapourizes at a relatively low temperature has a high volatility.This liquid is said to be highly volatile. |
| FUELS AND COMBUSTION |
WIND BOX |
A plenum from which air is supplied to a stoker or to gas oroil burners. |
| STEAM BOILERS |
AIR PREHEATER |
A device that makes the final heat recovery from boilerflue gases and uses the same to preheat the incoming furnace air for itsreaction with fuel. |
| STEAM BOILERS |
ANTI-INCRUSTATOR |
A substance used to prevent the formation of scale on the internal surfaces of steam boilers. |
| STEAM BOILERS |
ANTIPRIMING PIPE |
A pipe placed in the steam space of a boiler, so asto collect the steam while excluding entrained water. |
| STEAM BOILERS |
AUTOMATIC FEED WATER REGULATOR |
Device that regulatesfeedwater supply to the boiler according to load, and so does away withhand operation of valves on feed lines. It is controlled by temperature,its action depends upon expansion and contraction of some metal part. |
| STEAM BOILERS |
AUTOMATIC INJECTOR |
One that is self starting after its operationhas been stopped by the interruption of its water supply. |
| STEAM BOILERS |
BABCOCK and WILCOX BOILER |
water tube boiler consisting in itssimplest form of a horizontal drum from which is suspended a pair of headers carrying between them an inclined bank of straight tubes. |
| STEAM BOILERS |
BAG |
A bulged out section of a portion of the shell, extending through thefull thickness of the shell, caused by over heating and pressure. |
| STEAM BOILERS |
BALANCED DRAUGHT |
A system of air supply to a boiler furnace, in which one fan forces air through the grate, while a second, situated inthe uptake, exhausts the flue gases. The pressure in the furnace is thusat atmospheric i.e., is balanced. |
| STEAM BOILERS |
BANKING LOSS |
The fuel used in maintaining a floating bank or tomaintain a dead bank and then raise the steam pressure to normal. |
| STEAM BOILERS |
BANKING UP |
Reducing the rate of combustion in a boiler furnace by covering the fire with slack or fine coal. |
| STEAM BOILERS |
BENSON BOILER |
A high pressure boiler of the once through type in which water is pumped through the successive elements of the heatingsurface, firing being by gas, oil, or pulverized coal. |
| STEAM BOILERS |
BLISTER |
A separation of the metal from the shell plate, caused by impurities rolled into the shell plate when formed. |
| STEAM BOILERS |
BLOWDOWN OF SAFETY VALVE |
The difference between the pressureat which the safety valve pops and that at which it closes. |
| STEAM BOILERS |
BLOWING OFF |
Act of letting out water and steam from a boiler to carry off accumulated mud and scale. |
| STEAM BOILERS |
BLOW OFF VALVE |
The valve which empties the boiler for cleaning,inspection, or repair. It blows out mud, scale, or sediment when theboiler is in operation and prevents excessive concentration of solubleimpurities in the boiler. Also used for rapid lowering of
boiler waterlevel if it is too high. |
| STEAM BOILERS |
BOILER |
A closed pressure vessel in which a fluid is heated and convertedto vapour for use external to itself, by the direct application of heatresulting from the combustion of fuel (solid, liquid or gaseous) or by the use of electricity or nuclear energy. |
| STEAM BOILERS |
BOILER CAPACITY |
he weight of steam, usually expressed in kg/hour, which a boiler can evaporate, when steaming at full load output. |
| STEAM BOILERS |
BOILER COMPOSITION |
Chemicals introduced into the boiler feed water to inhibit scale formation and corrosion, or to prevent primingor foaming. |
| STEAM BOILERS |
BOILER CROWN |
he upper rounded plates of the boiler of shell type. |
| STEAM BOILERS |
BOILER EFFICIENCY |
The ratio of heat supplied by a boiler in heatingand evaporating the feed water to the heat supplied to the boiler inthe fuel. It may vary from 60 to 90 per cent. |
| STEAM BOILERS |
BOILER PATCH |
A small piece of metal used to cover and strengthen a weak spot. A soft patch is a covering over a leak or defect which isfastened with bolts, as distinguished from a hard patch which is riveted. |
| STEAM BOILERS |
BOILER PLATE |
Mild steel plate, generally produced by the open hearthprocess, used mainly for the shells and drums of steam boilers. |
| STEAM BOILERS |
BOILER PRESSURE |
The pressure at which steam is generated in a boiler. |
| STEAM BOILERS |
BOILER SETTING |
The supporting structure on which a boiler rests,usually of brick for land boilers and steel for marine boilers. |
| STEAM BOILERS |
BOILER TEST |
(1) A hydraulic pressure test applied to check watertightness under pressure greater than the working pressure. (2) Anefficiency test carried out to determine evaporative capacity andmagnitude of losses. |
| STEAM BOILERS |
BOILER TRIAL |
An efficiency test of a steam boiler, in which the weightof feed water and of fuel burnt are measured and various sources of losses are assessed. |
| STEAM BOILERS |
BOILER TUBES |
Steel tubes forming part of the heating surface in aboiler. In water tube boilers, the hot gases surround the tubes. Inlocomotive and some marine boilers (fire tube boilers) the gases passthrough the tubes. |
| STEAM BOILERS |
BREECHING |
The metal duct that carries the smoke and gases of combustion from a furnace to the stack or chimney for ultimatedischarge to the atmosphere. |
| STEAM BOILERS |
CARRY OVER |
It is entrained moisture and associated solids passing froma boiler with the steam. |
| STEAM BOILERS |
CAULKING |
Upsetting or burring up of the edge of the plate or strap afterriveting so as to make the edges press down tightly on the plate beneathand thus form a water and steam tight joint. |
| STEAM BOILERS |
CHECK VALVE |
A form of non return valve used to control the flow of water as in pump operation. |
| STEAM BOILERS |
CHIMNEY |
A tall, hollow cylindrical column built of steel, brick or concreteused to produce the required natural draft effect. |
| STEAM BOILERS |
CHIMNEY EFFECT |
The upward movement of warm air or gas, compared with ambient air or gas, due to the lesser density of the warm air orgas. Chimney effect may be a cause of uneven heating in buildingstwo or more stories high. |
| STEAM BOILERS |
CLEANING THE FIRE |
Operation of removing clinkers, etc., from theburning coal at regular intervals. |
| STEAM BOILERS |
CLOSED HEATER |
A type of heater in which the steam and feed waterare separated by a metal surface. |
| STEAM BOILERS |
CLYDE BOILER |
A boiler similar to a scotch boiler, but instead of a waterspace at the back end of the combustion chamber, a removable back whichis lined with some insulating material such as asbestos or fire tile, is existing. |
| STEAM BOILERS |
COCK |
A device for regulating the flow of fluids through a pipe. |
| STEAM BOILERS |
COLLECTOR or DRY PIPE |
A pipe placed inside a boiler at a high pointand having small perforations throughout its length so as to take off steam at a multiplicity of points and thus avoid turbulence caused by taking off steam at only one point. |
| STEAM BOILERS |
CORROSION |
Chemical action which causes destruction of the surface of a metal by oxidation, rusting. It is an electrochemical attack. |
| STEAM BOILERS |
DOUBLE TUBE BOILER |
Boiler having an auxiliary tube placed insideeach main tube. Gases flow from one end to the other end throughthe auxiliary tube and from that end to the other end in the reversedirection through the annular space in the main tube. |
| STEAM BOILERS |
DOWN COMER |
A large vertical tube or pipe for circulating water fromthe water space of the steam drum to water wall headers. |
| STEAM BOILERS |
DRAFT |
The difference of pressure producing air flow through the boilerfurnace, flue and chimney. |
| STEAM BOILERS |
DUPLEX PUMP |
A combination of two pumps arranged side by side and soconnected that movement of each operates the steam valve of the other. |
| STEAM BOILERS |
ECONOMIZER |
Feed water heater placed between the boiler and chimney (exhaust) stack, so as to absorb a portion of the heat in the gases, notabsorbed by the boiler. |
| STEAM BOILERS |
ELECTRIC BOILER |
Unit in which the resistance of water between solidmetal electrodes generates heat and thereby produces steam. |
| STEAM BOILERS |
EROSION |
It is a mechanical action causing wear by abrasion. |
| STEAM BOILERS |
EXTERNALLY FIRED BOILER |
One in which the furnace is outside theboiler shell, the furnace walls being usually of fire brick. Example, thefamiliar horizontal return tubular boiler. |
| STEAM BOILERS |
FEED WATER |
The water (chemically treated water) supplied to a boilerto replace that evaporated as steam or blown off. |
| STEAM BOILERS |
FEED WATER HEATER |
An apparatus for raising the temperature of boiler feedwater by abstracting some of the heat from exhaust steamor from the hot gases of combustion. |
| STEAM BOILERS |
FEED WATER REGULATOR |
An automatic device which controls theamount of feed water admitted to the boiler so as to maintain a constant water level in the boiler drum. |
| STEAM BOILERS |
FIREBOX BOILER |
Boiler having the fire within a firebox, althoughexternal to the shell, is rigidly connected to it. |
| STEAM BOILERS |
FIRE CRACKS |
Cracks caused by radiant heat, usually aroundcircumferential riveted seams of thick plates. |
| STEAM BOILERS |
FIRE LINE |
The highest point of the heating surface in most commontypes of boilers. |
| STEAM BOILERS |
FIRE TUBE |
Tube in which the products of combustion pass through and water surrounds the tube. |
| STEAM BOILERS |
FLASH BOILER |
A boiler consisting of a series of coils of steel tubing, water is supplied by a pump to the top coil, from where it circulatesthrough the other coils, becoming heated in its descent and issuingfrom the lower coil, as highly superheated steam. |
| STEAM BOILERS |
FLUID VAPOURIZER GENERATOR |
A closed vessel in which a heattransfer medium, other than water, is vapourized under pressure by the application of heat. |
| STEAM BOILERS |
FOAMING |
It is severe priming or agitation of the water level due to dirty or impure water. Small, stable, non-coalescing bubbles are formedthrough the boiler water. |
| STEAM BOILERS |
FOULING |
A condition of the flue gas passages in a boiler or furnace thatadversely affects the transfer of heat, usually in the form of soot orscale. |
| STEAM BOILERS |
FURNACE |
That part of the boiler designed for burning the fuel. |
| STEAM BOILERS |
FUSIBLE PLUG |
A safety device which acts in case of dangerously low water. It consists of an alloy of tin, lead and bismuth and a covering of brass or cast iron. The plug melts during dangerous water levels andpermits steam to rush into the furnace and put
out fire. |
| STEAM BOILERS |
GALLOWAY TUBES |
Transverse tubes placed in a flue tube and attachedto the openings in the side of the flue to increase the heating surface. |
| STEAM BOILERS |
GAUGE COCK |
A device for determining the water level in the boiler. |
| STEAM BOILERS |
GIRDER STAY |
A cast steel or built up girder with its ends resting on theside or end sheets of the fire box or combustion chamber, and supporting the flat crown sheet or top sheet of the combustion chamberby means of bolts. |
| STEAM BOILERS |
GOOSE NECK |
A short length of pipe having one complete turn to whichthe steam gauge is attached. |
| STEAM BOILERS |
GRATE SURFACE |
The area of the grate upon which fire rests in a coal or wood fired boiler. |
| STEAM BOILERS |
GROOVING |
Surface cracking of boiler plates. Expansion and contractionof parts too rigidly connected cause grooving. |
| STEAM BOILERS |
GROSS FEED WATER |
The net feed water plus the quantity of waterprovided for that blown out. |
| STEAM BOILERS |
GUSSET STAY |
Pieces of plate iron secured to the boiler front or back near the top or bottom by means of angle irons. |
| STEAM BOILERS |
HEATING SURFACE IN A BOILER |
Fire side area in a boiler exposed tothe products of combustion. The area consists of the surface area of tubes, fire boxes, shells, tube sheets and projected area of headers. |
| STEAM BOILERS |
HORIZONTAL RETURN TUBULAR BOILER |
One so arranged thatthe products of combustion after passing along the length of the shell,return in an opposite direction through the tubes, before passing upthe stack. |
| STEAM BOILERS |
HOT WATER HEATING BOILER |
A hot water heating boiler is usedfor space water heating, with the water returned to the boiler. |
| STEAM BOILERS |
HOT WATER SUPPLY BOILER |
boiler which supplies hot water to beused externally to itself for washing, cleaning etc. |
| STEAM BOILERS |
INCRUSTATION |
A coating over, the coating, being commonly knownas scale. |
| STEAM BOILERS |
INDUSTRIAL BOILER |
A stationary water tube steam generator, in whichsome of the steam is produced in a convective tube bank. |
| STEAM BOILERS |
INJECTOR |
An instrument for forcing water into a boiler against theboiler pressure by means of a steam jet. |
| STEAM BOILERS |
INTERMITTENT BLOW DOWN |
Blow down that is taken from thebottom of the mud-drum, water wall headers, or lowest point in thecirculation system, at regular intervals. |
| STEAM BOILERS |
INTERNALLY FIRED BOILER |
Boiler in which the furnace is withinthe shell, being surrounded by water. |
| STEAM BOILERS |
INTERNAL TREATMENT |
Treating water in the boiler while evaporationis taking place by chemically adjusting or balancing the boiler waterto prevent scale formation, corrosion, steam contamination andembrittlement. |
| STEAM BOILERS |
JAW STAY |
A round bar having jaws forged at one end and a flat plate atthe other inclined at the proper angle for riveting to the boiler shell. |
| STEAM BOILERS |
LIGAMENT |
The metal between tube holes in boiler practise. Section of the metal not cut away between two adjacent tube holes. |
| STEAM BOILERS |
LOCOMOTIVE BOILER |
A specially designed boiler, specifically meantfor self propelled traction vehicles on rails. |
| STEAM BOILERS |
LOG SHEET |
A forced reminder to check certain components of a boilerto prevent trouble from developing later and to note if proper operationis taking place. A data sheet. |
| STEAM BOILERS |
LOW WATER CUT OFF |
A device that shuts down the boiler immediately if the water drops to a dangerously low level. |
| STEAM BOILERS |
MAKE UP WATER |
Additional water to be put into the boiler periodically to make up for the loss due to leakage or exhausting of steam withoutcondensation. |
| STEAM BOILERS |
MARINE BOILER |
A low head type special design boiler meant for oceancargo and passenger ships with an inherent fast steaming capacity. |
| STEAM BOILERS |
MECHANICAL DRAFT |
The draft artificially produced by mechanicaldevices such as fans and in some units by steam jets. |
| STEAM BOILERS |
MECHANICAL STOKER |
A device constructed to automatically feedfuel to a furnace. Its use results in more efficient combustion owing toconstant instead of intermittent firing. |
| STEAM BOILERS |
MINIATURE HIGH PRESSURE BOILER |
A boiler which does notexceed the following limits: (1) 16 inside diameter of shell. (2) 5cuft. gross volume exclusive of casing and insulation (3) 100 psi gauge.If it exceeds any of these limits |
| STEAM BOILERS |
MISSISSIPPI COCK |
A cock in which steam pressure keeps the cock closed and a push button is provided to open the cock. |
| STEAM BOILERS |
NATURAL DRAFT |
The draft caused by the difference in weight betweenthe column of hot gas inside the chimney and a column of cool outsideair of the same height and cross-section. |
| STEAM BOILERS |
NET FEED WATER |
The quantity of water necessary to supply a statedevaporation in a given interval of time. |
| STEAM BOILERS |
NON-SECTIONAL BOILER |
A boiler in which the tubes are dividedinto groups, each group communicating with a header at each end,making independent units. |
| STEAM BOILERS |
ONCE THROUGH BOILER |
A boiler or steam generator which receivesfeed water at one end of continuous tubes and discharges steam at theother end. |
| STEAM BOILERS |
OPEN HEATER |
An open chamber in which the exhaust steam and waterto be heated are brought into intimate contact by spraying the waterthrough the steam, both the water and condensate going to the boiler. |
| STEAM BOILERS |
PACKAGED BOILER |
A completely factory assembled boiler either watertube or fire tube, including boiler firing apparatus, controls and boilersafety devices. |
| STEAM BOILERS |
PALM STAY |
A round rod having forged on one end a plate or palm. |
| STEAM BOILERS |
pH VALUE |
It is a number between 0 and 14 indicating the degree of acidity or alkalinity. |
| STEAM BOILERS |
PITTING |
A form of corrosion resulting in a series of minute holes or pitseaten into the surface of the metal to a depth of sometimes 6 mm. |
| STEAM BOILERS |
POP SAFETY VALVE |
A valve so constructed that it opens very suddenly like a cork popping out of a champagne or sparkling burgandy bottle andremains open until the pressure is reduced a predetermined amount. |
| STEAM BOILERS |
PORCUPINE BOILER |
A boiler having a vertical drum into which arescrewed a multiplicity of horizontal radial short tubes. |
| STEAM BOILERS |
PORTABLE BOILER |
A boiler mounted on a truck, barge, a small riverboat, or any other such mobile apparatus. |
| STEAM BOILERS |
POSITIVE INJECTOR |
One with a hand operated overflow valve, which permitsoperation at high pressure by stopping the drizzle from the overflow. |
| STEAM BOILERS |
POWER BOILER |
A power boiler is a steam or vapour boiler operatingabove 15 psig and exceeding the miniature size boiler. |
| STEAM BOILERS |
PRIMING |
It lifts the water level and delivers steam containing spray of water. It is usually caused by forcing a boiler too hard or by a too high water level or a combination of both these causes. |
| STEAM BOILERS |
RADIAL STAYS |
Long threaded rods used in locomotive boilers, screwed throughboth the firebox crown sheet and wrapper sheet and the ends riveted. |
| STEAM BOILERS |
REDUCING VALVE |
An automatic throttle valve for use where low pressuresteam for heating or process is taken from high pressure mains. |
| STEAM BOILERS |
REGENERATIVE AIR HEATER |
A type of air heater containing a rotor which comes in contact alternately with hot gases and air thereby transfers heat from hot gases to the air. |
| STEAM BOILERS |
REHEATER |
A superheater that heats steam which is let out from a highpressure turbine and after heating sends the steam to a low pressureturbine thereby increases the plant efficiency. |
| STEAM BOILERS |
RETARDERS |
Also called Spinners-These are helical strips or ribbons of metal centered in horizontal or vertical fire tubes of a fire tube boilerfor increasing the wiping effect on the inner surfaces of the tubes, by the flue gases on their way to the chimney
stack. The tubes cannot becleaned by scraping or brushing until these strips are removed. Retardersalso increase the boiler frictional resistance to the flue gases. |
| STEAM BOILERS |
RINGLEMANN CHART |
The chart used for comparing the smokesdensity when no instrument is available. |
| STEAM BOILERS |
RIVETED JOINT EFFICIENCY |
Ratio of the strength of a unit sectionof the joint to the same unit length of solid plate. Unit length usually taken is the pitch of the rivets (distance from centre to centre) in therow having the greatest pitch. |
| STEAM BOILERS |
RIVETED STAYS |
Stays in which the threaded ends are riveted instead of having a nut at each end. |
| STEAM BOILERS |
SAFETY VALVE |
A circular valve connecting the steam space of a boilerand loaded to such an extent that when the pressure of steam exceedsa certain point, the valve is lifted from its seat and allows the steam toescape. The valve is loaded either by weight or
by a spring. The releaseof steam saves the boiler from explosion. |
| STEAM BOILERS |
SCALE |
Incrustation within a vessel caused by the mineral substances fromthe water. Scale is a result of the chemical effect of the heat andconcentration. A hard coating, chiefly calcium sulphate. If the scale isexcessive, it leads to overheating of
the metal and ultimate failure. |
| STEAM BOILERS |
SCOTCH BOILER |
A horizontal boiler in which the combustion chamberat the end of the boiler shell is entirely surrounded by water. |
| STEAM BOILERS |
SCUM SCOOP |
Apparatus for blowing out water from the surface toremove fine particles of scale forming foreign matter. |
| STEAM BOILERS |
SEPARATOR |
The device that removes as much moisture as possible fromsteam after it leaves the boiler. |
| STEAM BOILERS |
SINGLE TUBE BOILER |
Boiler made up of plain tubes, and the gasesflow from one end to the other end of the tubes. |
| STEAM BOILERS |
SOCKET STAY |
Also called stay bolt consisting of a rod and socket. |
| STEAM BOILERS |
STATIONARY BOILER |
A boiler which is installed permanently on aland installation. |
| STEAM BOILERS |
STAY BOLT |
Short stay bars to support flat surfaces that are only a shortdistance apart, such as inner and outer sheets of water legs in alocomotive boiler. Generally have screw threads cut at one end, andsometimes at both ends, to receive a nut. |
| STEAM BOILERS |
STAY ROD or THROUGH STAY |
A plain rod 1 1/4 to 2 1/2″ in diameterhaving nuts and washers for fastening the ends to the plates.” |
| STEAM BOILERS |
STAY TUBE |
A thick tube with threads on the ends, one end being largerthan the other so that the tube may be slipped through the large hole. |
| STEAM BOILERS |
STEEL ANGLE STAY |
Two lengths of steel angle riveted together forminga T shape piece and riveted to the plate. |
| STEAM BOILERS |
STEAM |
Water in a semigaseous condition. It is a vapour than a gas, that isa substance between the purely liquid and gaseous states. Wet steam. |
| STEAM BOILERS |
STEAM BOILER |
A closed vessel in which steam or other vapour isgenerated continuously for use external to itself by the direct applicationof heat resulting from the combustion of fuel (solid, liquid, or gaseous)or by the use of electricity or nuclear energy. |
| STEAM BOILERS |
STEAM GAUGE |
A device for indicating gauge pressure as distinguishedfrom absolute pressure. |
| STEAM BOILERS |
STEAM LOOP |
An ingeneous thermal pump consisting of an arrangementof piping wherein condensate is returned to the boiler. |
| STEAM BOILERS |
STEAM SEPARATOR |
An apparatus for separating out moisture that may be carried in suspension by steam flowing in pipelines, and for preventingthis moisture from reaching and perhaps damaging engines, pumps, orother machinery that may be driven by the steam. |
| STEAM BOILERS |
STEAM SPACE |
The space above the water level in a boiler where steamgets collected until it is drawn off through the steam main. |
| STEAM BOILERS |
STEAM TRAP |
An automatic device which allows the passage of waterbut prevents the passage of steam. It is used to drain pipes of condensate. |
| STEAM BOILERS |
STOP VALVE |
A non-return valve having a hand wheel and screw stem which acts only to close the valve. |
| STEAM BOILERS |
SUBMERGED TUBE BOILER |
A vertical boiler having tubes extendingfrom the lower tube sheet to an upper submerged tube sheet. |
| STEAM BOILERS |
SUPER CRITICAL BOILER |
A boiler that operates above the super criticalpressure of 3206. 2 psi and 705.4°F saturation temperature. |
| STEAM BOILERS |
THERMAL LIQUID HEATER |
A closed vessel in which a heat transfermedium other than water is heated without vapourization, and theheated fluid gives up its heat and does useful work outside the closedvessel. |
| STEAM BOILERS |
THROUGH TUBE BOILER |
A vertical shell boiler having tubes extendingfrom the lower tube sheet to the full length of the shell. |
| STEAM BOILERS |
TRAVELLING GRATE or CHAIN GRATE |
A type of overfeed stokerconsisting of an endless grate composed of short sections of bars passingover sprockets at the front and rear of the furnace. |
| STEAM BOILERS |
TUBE SHEET |
A sheet of a water tube boiler where tubes are inserted,either in a flat sheet or a drum. |
| STEAM BOILERS |
UNDERFEED STOKER |
One in which the fuel is fed upward fromunderneath. |
| STEAM BOILERS |
WASTE HEAT BOILER |
A boiler which uses byproduct heat such as froma blast furnace in a steel mill, exhaust from a gas turbine, or by productsfrom a manufacturing process. Waste heat is passed over the heat exchangersurfaces to produce steam or hot water for conventional
use. |
| STEAM BOILERS |
WATER ANALYSIS |
Analyzing a water sample i.e., process of finding outhow much of the various impurities and other chemical substances arepresent in the water. The results are usually expressed in parts per million(ppm). |
| STEAM BOILERS |
WATER COLUMN |
A boiler fixture consisting of a cylindrical piece to which are attached the water gauge and gauge cocks, thus combiningthe two into one unit. The top and bottom have outlets which connectit with the boiler below and above the water level. |
| STEAM BOILERS |
WATER GAUGE |
A device used to indicate the height of water within a boiler. |
| STEAM BOILERS |
WATER GRATE |
A series of pipes connected close together in parallel to aheader at one end and to upflow elements at the other. |
| STEAM BOILERS |
WATER LINE |
The level at which water stands in the boiler. |
| STEAM BOILERS |
WATER TUBE |
One which is surrounded by the products of combustion,the water being inside the tube. |
| STEAM BOILERS |
WATER TUBE BOILER |
A boiler which contains one or more relatively small drums with a multiplicity of tubes in which water steam circulateand hot gases surround the tubes. |
| STEAM BOILERS |
WINDOW PATCH |
A patch used to seal a hole cut in a water tube toprovide access for welding the backside of a circumferential joint, orto replace a small, sharp bag. |
| STEAM ENGINES TURBINES |
ACCELERATED FLOW |
Type of flow that takes place in nozzles. Theflow accelerates and pressure reduces. |
| STEAM ENGINES TURBINES |
ADMISSION |
The point in the working cycles of a steam or IC engine at which the inlet valve allows entry of the working fluid into the cylinder. |
| STEAM ENGINES TURBINES |
AIR PUMP |
A reciprocating or centrifugal pump used to remove air, andsometimes the condensate, from the condenser of a steam plant. |
| STEAM ENGINES TURBINES |
ANGLE OF ADVANCE |
The angle in excess of 90 degree by which theeccentric throw of a steam engine valve gear is in advance of the crank. |
| STEAM ENGINES TURBINES |
ALLAN VALVE |
A steam engine slide valve, in which a supplementary passage increases the steam supply to the port during admission toreduce wire drawing. |
| STEAM ENGINES TURBINES |
ATMOSPHERIC ENGINE |
An early form of steam engine in which apartial vacuum created by steam condensation allowed atmosphericpressure to drive down the piston. |
| STEAM ENGINES TURBINES |
AXIAL DISCHARGE TURBINE |
A steam turbine in which the absolutevelocity of steam flow at exit is a minimum i.e., the steam discharges inthe axial direction. |
| STEAM ENGINES TURBINES |
AXIAL FLOW TURBINE |
Steam turbine in which the general directionof steam flow has been roughly parallel to the turbine axis. |
| STEAM ENGINES TURBINES |
BACK PRESSURE TURBINE |
A steam turbine from which the whole of the exhaust steam, at a suitable pressure, is taken for heating purposes. |
| STEAM ENGINES TURBINES |
BAROMETRIC CONDENSER |
A high level jet condenser. |
| STEAM ENGINES TURBINES |
BASTERED CONDENSER |
It is an atmospheric keel condenser, whichare sometimes fitted to canal boats or other sea vessels. |
| STEAM ENGINES TURBINES |
BINARY VAPOUR ENGINE |
A heat engine using two separate workingfluids, generally mercury vapour and steam, for the high and low temperature portions of the cycle respectively, thus enabling a largetemperature range to be used, with improved thermal efficiency. |
| STEAM ENGINES TURBINES |
BLADE |
Part attached to the rotating element of the machine or rotor, in which the stream of steam particles has its direction and hence itsmomentum changed. Also called DEFLECTOR. |
| STEAM ENGINES TURBINES |
BLADE VELOCITY COEFFICIENT |
The ratio of the relative velocity of steam at outlet to the relative velocity at inlet of the blade. |
| STEAM ENGINES TURBINES |
BLANK FLANGE |
A disc, or solid flange, used to blank off the end of apipe. |
| STEAM ENGINES TURBINES |
BLAST PIPE |
The exhaust steam pipe in the smoke box of a locomotive, which terminates in a nozzle to provide draft by entraining the fluegases in the steam jet and exhausting them through the chimney. |
| STEAM ENGINES TURBINES |
BLEEDING |
A method of improving the thermal efficiency of steam plantby withdrawing a small part of the steam from the higher pressurestages of a turbine to heat the boiler feed water. |
| STEAM ENGINES TURBINES |
BLEEDER TURBINE |
A steam turbine in which the steam is extracted atone or more intermediate stages for industrial use, often atcomparatively high pressure. |
| STEAM ENGINES TURBINES |
BYPASS GOVERNING |
Governing arrangement in which part of thesteam that enters the turbine is bypassed depending upon the extentof load reduction. |
| STEAM ENGINES TURBINES |
CARRY-OVER LOSS |
Loss of kinetic energy at the exit of the turbine. Also called LEAVING LOSS. |
| STEAM ENGINES TURBINES |
CHOKED FLOW |
When a nozzle operates with the maximum mass flow it is said to the choked. |
| STEAM ENGINES TURBINES |
COMPOUND TURBINE |
A multistage steam turbine in which thepressure energy of the steam is progressively transformed into kineticenergy in two or more stages with or without velocity compoundingin each stage. |
| STEAM ENGINES TURBINES |
COMPOUND STEAM ENGINE |
An engine which has two or morecylinders of successively increasing diameters, so arranged that theexhaust steam from the first cylinder (high pressure cylinder) is passedon to do work in the second cylinder (low pressure cylinder), and to a third
cylinder in triple expansion engine, before being finally exhaustedinto a condenser. |
| STEAM ENGINES TURBINES |
CONDENSER |
A vessel into which steam is exhausted and condensed insteadof being rejected into the atmosphere after doing work in an enginecylinder or turbine. This is primarily for removing the back pressureupon an engine or turbine and thereby improve the
plant efficiency. |
| STEAM ENGINES TURBINES |
CONDENSING CYCLE |
A steam power plant cycle in which the exhauststeam is discharged into a condenser having a low back pressure, sothat more energy can be extracted per unit weight of steam. |
| STEAM ENGINES TURBINES |
CONSTANT VELOCITY FLOW |
Type of flow that takes place in parallelducts. |
| STEAM ENGINES TURBINES |
COOLING POND |
A shallow reservoir having a large surface area for removingheat from the cooling water used to condense steam in condensers. |
| STEAM ENGINES TURBINES |
COOLING TOWER |
An apparatus designed to remove from the cooling water, used in a condenser, as much heat as can possibly be abstractedper unit space occupied by the apparatus. |
| STEAM ENGINES TURBINES |
COUNTERFLOW STEAM ENGINE |
The engine in which the steamleaves the cylinder at the same end at which it entered. |
| STEAM ENGINES TURBINES |
CRITICAL PRESSURE OF NOZZLE |
The pressure at which the velocity of the fluid equals the local sound velocity. |
| STEAM ENGINES TURBINES |
CRITICAL PRESSURE RATIO |
Ratio of critical pressure of nozzle to theinitial pressure. |
| STEAM ENGINES TURBINES |
CRITICAL SPEED OF A SHAFT |
The speed at which the shaftdisplacement tends to be very large, and the shaft may becomepermanently bent. |
| STEAM ENGINES TURBINES |
CUSHION STEAM |
The steam present in the cylinder during compression which occurs just after the exhausting of steam by the inwardmovement of the piston. |
| STEAM ENGINES TURBINES |
CUTOFF GOVERNING |
Control of engine speed is accomplished by changing the volume of steam admitted to an engine cylinder as theload fluctuates. The points of steam cut off comes early in the strokeof the engine piston with light loads and later when they increase. |
| STEAM ENGINES TURBINES |
DECELERATED FLOW |
Type of flow that takes place in the diffusersvelocity decreases. |
| STEAM ENGINES TURBINES |
DEGREE OF REACTION |
In an impulse reaction turbine, it is the ratioof the enthalpy drop that takes place in rotor blades to the total enthalpy drop that occurs in the stage. |
| STEAM ENGINES TURBINES |
DIAGRAM EFFICIENCY or BLADING EFFICIENCY |
Ratio of therate of doing work per kg of steam (diagram work) to the energy suppliedto the rotor per kg of steam. |
| STEAM ENGINES TURBINES |
DIAGRAM FACTOR |
Ratio of actual indicator diagram area to thehypothetical indicator diagram area. |
| STEAM ENGINES TURBINES |
DIAPHRAGMS |
Partitions, which separate one wheel chamber from thenext and in which nozzles are usually fitted in the case of pressurecompounded impulse turbine. |
| STEAM ENGINES TURBINES |
DIFFUSER |
The duct in which a fluid is decelerated causing a rise in pressurealong the stream. |
| STEAM ENGINES TURBINES |
DISC FRICTION |
Surface friction loss due to relative motion betweenthe disc and steam particles when the disc is rotating in the viscousfluid i.e., steam. |
| STEAM ENGINES TURBINES |
DOUBLE ACTING ENGINE |
A steam engine in which a power cycle isproduced in each end of the cylinder during one revolution of thecrankshaft. |
| STEAM ENGINES TURBINES |
DOUBLE DECK SPRAY POND |
The pond having spray nozzles arrangedat different elevations. |
| STEAM ENGINES TURBINES |
D SLIDE VALVE |
A sliding valve which alternately admits steam to andreleases the steam from each end of the steam engine cylinder. |
| STEAM ENGINES TURBINES |
DRY AIR PUMP |
A pump designed to handle air and gases only, which will give a higher vacuum than possible with a wet air pump. |
| STEAM ENGINES TURBINES |
ECCENTRICITY |
The distance between the centre of the crankshaft andthe centre of the eccentric and is equal to the effective crank arm of the eccentric. |
| STEAM ENGINES TURBINES |
ENGINE RELATIVE EFFICIENCY |
Ratio of actual thermal efficiency to that of the rankine cycle for the same pressure and temperatureconditions. |
| STEAM ENGINES TURBINES |
EVAPORATIVE CONDENSER |
A type of surface condenser in which thesteam is fed through the condenser tubes over which cooling water issprayed and cooling is effected mainly by evaporation of the sprayed water. |
| STEAM ENGINES TURBINES |
EXHAUST LAP |
The overlap of the release edge of the D slide valve overthe release edge of the port when the valve is in the mid position which is the middle of its travel. |
| STEAM ENGINES TURBINES |
FULL ADMISSION TURBINE |
A steam turbine in which steam isadmitted over the entire circumference of the blade annulus. Reactionturbines are full admission turbines. |
| STEAM ENGINES TURBINES |
GLAND |
Device provided to minimise the leakage of steam, or in the caseof the low pressure end of the turbine the leakage of air through theclearance space which separates the rotor from the casing. |
| STEAM ENGINES TURBINES |
HEAT ENGINE |
A device which transforms heat energy into mechanicalenergy and render the latter available for doing useful work. It is merely an energy transformer. |
| STEAM ENGINES TURBINES |
HELICAL FLOW TURBINE |
A single pressure, multiple velocity stagemachine designed for helical flow. |
| STEAM ENGINES TURBINES |
IMPULSE |
The act of impelling or suddenly driving forward in the samedirection as the applied force. |
| STEAM ENGINES TURBINES |
IMPULSE TURBINE |
A steam turbine in which the steam is expandedcausing pressure drop in nozzles only and the moving blades attachedto the rotor merely deflect the steam through an angle. The pressureon the two sides of the blades remains constant. |
| STEAM ENGINES TURBINES |
IMPULSE REACTION TURBINE |
A steam turbine in which the steamis expanded both in the fixed blade and the moving blade continuously as the steam passes over them. The pressure drops gradually andcontinuously over both moving and fixed blades. Often called asREACTION TURBINE. |
| STEAM ENGINES TURBINES |
INTERNAL TURBINE EFFICIENCY |
Ratio of the total useful heat dropto the adiabatic heat drop corresponding to the whole pressure dropthat occurs. This is the product of stage efficiency and reheat factor. |
| STEAM ENGINES TURBINES |
JET CONDENSER |
A closed chamber within which exhaust steam comesin direct contact with a spray or jet of cold water and is condensed. |
| STEAM ENGINES TURBINES |
KEEL CONDENSER |
A type of marine outboard single pass surfacecondenser attached to the side of a hull below the water line. It requiresno circulating water pump. |
| STEAM ENGINES TURBINES |
LAP OF D SLIDE VALVE |
It is that portion of the valve face whichoverlaps the ports when the valve is in its central or neutral position. The distance overlapping on the outside is called OUTSIDE LAP orSTEAM LAP, and the distance overlapping on the inside is calledINSIDE
LAP or EXHAUST LAP. |
| STEAM ENGINES TURBINES |
LAYBRINTH GLAND |
A type of gland consisting of a series of intricatepassages, laybrinths, which are designed to destroy the kinetic energy developed by the steam leaving through the small clearance space. Inthe clearance space, this energy is converted to thermal
energy. |
| STEAM ENGINES TURBINES |
LEAD OF D SLIDE VALVE |
The amount by which the steam port isopened by the valve when the piston in a steam engine cylinder is atthe begining of its stroke. |
| STEAM ENGINES TURBINES |
LOW PRESSURE TURBINE |
turbine operating at approximately atmospheric pressure and expanding to condenser pressure. |
| STEAM ENGINES TURBINES |
MISSING QUANTITY |
In a steam engine, this is the lack of volume dueto the steam not remaining dry and saturated during expansion. |
| STEAM ENGINES TURBINES |
MIXED PRESSURE TURBINE |
A turbine designed to work on two ormore pressures. |
| STEAM ENGINES TURBINES |
NATURAL POND |
A natural flow pond having no baffle walls or spray nozzle. |
| STEAM ENGINES TURBINES |
NET EFFICIENCY |
Ratio of network delivered at shaft to the total energy supplied to the steam turbine/steam engine. In the case of steam turbineit is the product of nozzle efficiency, diagram efficiency and mechanicalefficiency. |
| STEAM ENGINES TURBINES |
NOZZLE |
A duct of smoothly varying cross-sectional area in which a steadily flowing fluid can be made to accelerate by a pressure drop along the duct. |
| STEAM ENGINES TURBINES |
NOZZLE CONTROL GOVERNING |
Governing arrangement in whichnozzles are grouped together in three or five or more groups and eachgroup of nozzles is supplied with steam which is controlled by valves. |
| STEAM ENGINES TURBINES |
NOZZLE EFFICIENCY |
Ratio of the actual enthalpy drop to the isentropicenthalpy drop between the same pressures. |
| STEAM ENGINES TURBINES |
NOZZLE THROAT |
The section of the nozzle where the area is minimum. |
| STEAM ENGINES TURBINES |
OVER EXPANDING |
A nozzle which operates with a back pressure abovethe designed value of pressure at the exit of the nozzle. |
| STEAM ENGINES TURBINES |
OVERALL THERMAL EFFICIENCY |
Ratio of the useful heat drop tothe heat supplied in a turbine. |
| STEAM ENGINES TURBINES |
PARTIAL ADMISSION TURBINE |
An impulse turbine in which thenozzles occupy only a part of the circumference leading into bladeannulus and therefore admit steam over part of the blade annulus.Impulse turbines are partial admission turbines. |
| STEAM ENGINES TURBINES |
PRESSURE COMPOUNDED IMPULSE TURBINE |
Steam turbinein which the total pressure drop of steam is divided into stages in anumber of rings of fixed nozzles and the velocity produced by a ringof nozzles is utilized almost fully in the immediately following row of moving blades attached
to the rotor. |
| STEAM ENGINES TURBINES |
PRESSURE VELOCITY COMPOUNDED IMPULSE TURBINE |
Steam turbine in which the total pressure drop of steam is divided intostages and the velocity thus obtained in each stage is also compoundedie utilized in two or more rings of moving blades. |
| STEAM ENGINES TURBINES |
RADIAL FLOW TURBINE |
A steam turbine in which the blades are soarranged to cause the flow of steam radially inwards or outwards. |
| STEAM ENGINES TURBINES |
RANKINE EFFICIENCY OF TURBINE |
Ratio of the adiabatic heatdrop to the heat supplied. |
| STEAM ENGINES TURBINES |
REAMED NOZZLE |
A round nozzle used primarily in the high pressureimpulse stage steam turbines. They have lower efficiency and somewhatgreater in length. |
| STEAM ENGINES TURBINES |
REHEAT CYCLE |
A system in which steam is initially expanded througha turbine and then reheated before further expansion in the turbine. |
| STEAM ENGINES TURBINES |
REHEAT FACTOR |
In a multistage steam turbine it is the ratio of thesum of the individual heat drops (cumulative drop) in the differentstages to the direct or adiabatic drop in a single step for the wholepressure drop that occurs. |
| STEAM ENGINES TURBINES |
RELATIVE EFFICIENCY |
Ratio of the overall thermal efficiency of theactual plant to the thermal efficiency of the ideal Rankine cycle. |
| STEAM ENGINES TURBINES |
RIM HORSE POWER |
Power developed by steam in passing over theblade as obtained from the velocity diagrams. |
| STEAM ENGINES TURBINES |
SCOOP CONDENSER |
A type of marine condenser with a flow of circulating water induced through an enclosed chamber by themovement of the vessel, rather than externally as with a keel condenser. |
| STEAM ENGINES TURBINES |
SIMPLE IMPULSE TURBINE |
A steam turbine in which the expansionof the steam takes place in one set of nozzles only. |
| STEAM ENGINES TURBINES |
SIMPLE MULTISTAGE TURBINE |
A steam turbine in which the pressureenergy of the steam is progressively transformed into kinetic energy intwo or more pressure stages, there being one wheel to each stage. |
| STEAM ENGINES TURBINES |
SINGLE WHEEL IMPULSE TURBINE |
A steam turbine having a set of nozzles and one row of moving blades fixed to the rotor. The movingblades deflect the steam and therefore cause a change in momentumand consequently produce force i.e. , motive force. |
| STEAM ENGINES TURBINES |
SPRAY POND |
A pond which is provided with spray apparatus so that thehot cooling water from the condenser is sprayed over the surface of thepond and cooled. |
| STEAM ENGINES TURBINES |
STAGE EFFICIENCY |
Ratio of the rate of doing work per kg of steam(diagram work) to the energy supplied to the stage per kg of steam, ina steam turbine. Also called GROSS STAGE EFFICIENCY. This isproduct of nozzle efficiency and blade efficiency. |
| STEAM ENGINES TURBINES |
STEAM CONDENSER |
Device in which the exhaust steam from an engineor a turbine is condensed and air and other non condensable gases areremoved in a continuous process. |
| STEAM ENGINES TURBINES |
STEAM JET VACUUM PUMP |
Pump system in which one or moresteam jets moving at a high velocity (1000 m/s) entrain the saturatednon condensable gases, and the mixture passes through an expandingtube in which the velocity is reduced with a resulting increase inpressure and
finally the mixture is let out into the atmosphere. Alsocalled STEAM JET AIR EJECTOR. |
| STEAM ENGINES TURBINES |
STEAM LAP |
The distance by which the admission edge of the D slidevalve overlaps the edge of the steam port when the valve is in the midposition, which is the middle of its travel. |
| STEAM ENGINES TURBINES |
STEAM RATE OF AN ENGINE |
The weight of steam supplied to asteam engine per horse power hour. |
| STEAM ENGINES TURBINES |
STEAM TURBINE |
A prime mover in which gradual changes in the momentumof a fluid are utilized to produce rotation of the movable member. |
| STEAM ENGINES TURBINES |
STEAM TURBINE EXTERNAL LOSSES |
Losses which do not affectthe steam conditions while it flows through the turbine, includesmechanical losses and losses due to the end leakages. |
| STEAM ENGINES TURBINES |
STEAM TURBINE INTERNAL LOSSES |
Losses connected with thesteam conditions while it flows through the turbine. These includelosses in regulating valve, nozzles, moving blades, carry-over losses fromone stage to another, rotor and guide blade clearance losses, loss due tosteam
wetness and exhaust losses. |
| STEAM ENGINES TURBINES |
SURFACE CONDENSER |
A device for condensing steam, in which thesteam and the cooling water do not come into contact with each other,but are separated by metal surfaces. |
| STEAM ENGINES TURBINES |
SURFACE CONDENSER SINGLE PASS TYPE |
Type of surfacecondenser in which the cooling water flows in one direction only through all the tubes. |
| STEAM ENGINES TURBINES |
SURFACE CONDENSER TWO PASS TYPE |
Type of surface condenserin which the cooling water flows in one direction through part of thetubes and returns through the remainder. |
| STEAM ENGINES TURBINES |
TAPERED BLADES |
Blades tapered in width along the length of theblade so as to obtain an even more uniform centrifugal stress. |
| STEAM ENGINES TURBINES |
THERMAL EFFICIENCY OF RANKINE CYCLE |
Ratio of the thermalequivalent of output to thermal equivalent of input of a unit workingon Rankine cycle. |
| STEAM ENGINES TURBINES |
THERMOCOMPRESSOR or BOOSTER EJECTOR |
Compressiondevice designed to handle steam instead of other gases. |
| STEAM ENGINES TURBINES |
THROTTLE GOVERNING |
Governing effected in a steam engine by varying the initial steam pressure within the engine cylinder. Thegovernor is called THROTTLE GOVERNOR. Power output is variedby varying initial steam pressure. |
| STEAM ENGINES TURBINES |
TRANSONIC NOZZLE |
A nozzle usually of the reamed type and this isused in small impulse steam turbines, or velocity compounded stages where large enthaply drops are required. |
| STEAM ENGINES TURBINES |
UNDER EXPANDING NOZZLE |
A nozzle which operates with a back pressure below the designed value of pressure at the exit of the nozzle. |
| STEAM ENGINES TURBINES |
VACUUM BREAKER |
An automatic device used to protect the main engineor turbine from flooding when a jet condenser is used. |
| STEAM ENGINES TURBINES |
VACUUM KEEL CONDENSER |
A type of keel condenser having tubularcondensing surface, a return pipe for the condensate, the end of whichconnects with a wet air pump. |
| STEAM ENGINES TURBINES |
VELOCITY COMPOUNDED IMPULSE TURBINE |
Steam turbinein which the total heat drop takes place in the nozzles, but the velocity (energy) generated is utilized in two or more rings of blades attachedto the rotor. |
| STEAM ENGINES TURBINES |
WILLANS LINE |
The line which represents the total weight of steamnecessary per hour plotted as ordinates against the correspondingengine loads (either as IHP, BHP or KW) as abscissa. |
| STEAM ENGINES TURBINES |
WIRE DRAWING |
In a steam engine, the fall in pressure caused by steamflowing through the restricted (valve) Passage immediately before thepoint of cut off. |
| STEAM ENGINES TURBINES |
WORKING STEAM |
The steam that actually flows through the blades,this is different from the total steam flow through the turbine. |
| GAS TURBINES |
ADIABATIC PROCESS |
Thermodynamic process in which no heat istransferred to or from the system during the process. A reversibleadiabatic process is called ISENTROPIC PROCESS. |
| GAS TURBINES |
AIRFOIL |
A streamlined form bounded principally by two flattened curvesand whose length and width are very large in comparison with thickness.The airfoil may be a symmetrical airfoil or a non-symmetrical airfoil. |
| GAS TURBINES |
AIRFOIL DRAG FORCE |
Force acting on the airfoil in the direction of motion, represents frictional forces. |
| GAS TURBINES |
AIRFOIL LIFT FORCE |
Force acting on the airfoil in the directionperpendicular to the direction of motion. Basic force causing theaeroplane to maintain its lift. |
| GAS TURBINES |
AIR RATE |
Kilograms per second of airflow required per net horse powerdeveloped. Also called FLOWRATE. |
| GAS TURBINES |
ANGLE OF ATTACK |
The angle of inclination of the non-symmetricalairfoil with the direction of the undisturbed flow. |
| GAS TURBINES |
ANGLE OF DEVIATION |
The difference between the fluid angle at outletand the blade angle at outlet. This may be positive or negative.Sometimes called DEVIATION. |
| GAS TURBINES |
ANGLE OF INCDIENCE |
The difference between the fluid angle at inletand the blade angle at inlet. This may be positive or negative. Sometimescalled INCIDENCE. |
| GAS TURBINES |
ANNULAR TYPE COMBUSTION CHAMBER |
The combustionchamber which is made up of four concentric surfaces surroundingthe axis of the rotor, forming three chambers on either side of the rotor, the middle casing acts as a flame tube and the inner and outercasings act as air casings,
with a series of burners at the front end. |
| GAS TURBINES |
ASPECT RATIO OF BLADE |
Ratio of blade height to blade chord. |
| GAS TURBINES |
AXIAL FLOW COMPRESSOR |
A type of compressor in which the fluidflow is almost parallel to the axis of the compressor and the flow isdecelerating or diffusing and pressure rises are obtained by causingthe fluid to pass through a number of expanding spaces withconsequent
reduction in velocity. |
| GAS TURBINES |
BLADES or BUCKETS |
The parts that form the rotor flow passages andserve to change the direction, and hence the momentum, of the fluidreceived from the stationary nozzles. |
| GAS TURBINES |
BLADE SPEED RATIO |
Ratio of mean blade speed to the absolute velocity of the fluid stream at the blade inlet. |
| GAS TURBINES |
BOUNDARY LAYER |
A thin layer of fluid adhering to a surface, when thefluid flows along the surface, in which there is a steep velocity gradientdue to viscous friction, the velocity dropping to zero at the boundary surface. |
| GAS TURBINES |
BRAYTON CYCLE |
Basic cycle for gas turbines. The cycle in which air iscompressed isentropically, heated at constant pressure and expandedisentropically thus delivers work until the low pressure is reached andthen heat is rejected. Also called JOULE CYCLE. |
| GAS TURBINES |
CAN TYPE COMBUSTION CHAMBER |
Combustion chamber in which the air leaving the compressor is split into several streams andeach stream is supplied to a separate cylindrical combustion chamber. |
| GAS TURBINES |
CARRY OVER LOSS |
Kinetic energy discarded in the exhaust. Axial exitof the fluid from the turbine blades reduces this loss. |
| GAS TURBINES |
CASING |
Turbine enclosure to which the nozzles and guides are fixed. Alsocalled a SHELL or CYLINDER. |
| GAS TURBINES |
CENTRIFUGAL COMPRESSOR |
A type of compressor in which air issucked into the impeller eye, whirled around at high speed by thevanes on the impeller disc and flung out by centrifugal force. |
| GAS TURBINES |
CLOSED CYCLE TURBINE |
Turbine in which the working fluid doesnot come in contact with the atmospheric air and the heat to the working fluid is provided in the heater by burning the fuel externally. |
| GAS TURBINES |
COMBINATION PLANT |
A gas turbine plant that utilizes reheat,intercooling and regeneration. |
| GAS TURBINES |
COMBUSTION CHAMBER |
The unit in which the chemicalcombination of oxygen in the air supplied by the compressor takesplace with the carbon and hydrogen components of the fuel in such amanner that a steady stream of the gases at uniform temperature isproduced and delivered
to the turbine. |
| GAS TURBINES |
COMBUSTION EFFICIENCY |
The ratio of the actual heat realised by the combustion of fuel to the ideal value i.e., calorific value. |
| GAS TURBINES |
COMBUSTION INTENSITY |
Ratio of the rate of heat supply by fuel tothe product of volume of combustion chamber and inlet pressure inatmospheres. |
| GAS TURBINES |
COMPRESSOR EFFICIENCY |
Ratio of work required for isentropiccompression to the actual work input. Also called ISENTROPICCOMPRESSION EFFICIENCY. |
| GAS TURBINES |
COMPRESSOR MECHANICAL EFFICIENCY |
Ratio of rotor horsepower to shaft horse power supplied to the compressor. |
| GAS TURBINES |
CONSTANT PRESSURE TURBINE |
Turbine in which the fuel is burntat constant pressure. Combustion is a continuous process. |
| GAS TURBINES |
CONSTANT VOLUME TURBINE |
Turbine in which the combustiontakes place at constant volume. Also called EXPLOSION TYPETURBINE. |
| GAS TURBINES |
CONVERGENT DIVERGENT DIFFUSER |
A type of diffuser whichcan build up pressure when velocities are reduced from supersonic tosubsonic values. |
| GAS TURBINES |
COOLING OF TURBINE BLADES |
Turbine blades are cooled by water or air. This enables the temperature of the blade metal to beseveral hundred degrees lower than the gas temperature and permitsemployment of correspondingly higher turbine inlet temperatures, with the metals
available at present, resulting in higher turbineefficiency. |
| GAS TURBINES |
COUNTERFLOW HEAT EXCHANGER |
A heat exchanger in whichcompressed air and hot gases let out by the turbine, flow in oppositedirections. |
| GAS TURBINES |
CROSS COMPOUNDED UNIT |
The system in which the low pressurecompressor is driven by the high pressure turbine and the high pressurecompressor by the low pressure turbine. |
| GAS TURBINES |
CROSS FLOW HEAT EXCHANGER |
A heat exchanger in which thecompressed air and the hot gases let out by the turbine flow normal toone another. |
| GAS TURBINES |
CYCLE PRESSURE RATIO |
Ratio of the pressure at inlet to the gas turbineto that at inlet to the compressor. |
| GAS TURBINES |
CYCLE WITH INTERCOOLED COMPRESSION |
Gas turbine cycle in which the compression of the working fluid is cut off at some intermediatepressure and the fluid is cooled by passing it through a heat exchangersupplied with coolant from some external source before being compressedin the
second compressor to the required pressure ratio. |
| GAS TURBINES |
DEFLECTION ANGLE |
Total fluid turning angle i.e., difference betweenthe fluid angle at inlet and the fluid angle at outlet. |
| GAS TURBINES |
DEGREE OF REACTION (compressor) |
The ratio of the statictemperature rise in the rotor to that in the whole stage. |
| GAS TURBINES |
DEGREE OF REACTION (turbine) |
Ratio of enthaply drop in rotorblades to enthaply drop in the stage. |
| GAS TURBINES |
DIAPHRAGM |
The component fixed to the cylinder or casing and containsthe nozzles and serves to confine the fluid flow to the nozzle passages. |
| GAS TURBINES |
DIFFUSER |
Unit connected to the outlet of the centrifugal compressor, which provides a gradually increasing area to convert velocity energy into pressure energy. |
| GAS TURBINES |
DIFFUSION |
Process in which the energy of a moving stream of fluid istransformed in such manner, then an increase in pressure occurs. |
| GAS TURBINES |
DISC or WHEEL |
The component to which the moving blades are attacheddirectly and it is keyed or shrunk on the shaft. |
| GAS TURBINES |
DISC FRICTION |
When a disc rotates in free air, a certain amount of pumping action would take place, imparting motion to thesurrounding air, and this relative motion between the disc and aircauses friction, called disc friction. |
| GAS TURBINES |
DOUBLE SIDED IMPELLER |
Impeller of a centrifugal compressor in which suction takes place from both sides. Here, two similar impellersare placed back to back. |
| GAS TURBINES |
DYNAMIC HEAD |
The difference between the total head pressure andthe static pressure. |
| GAS TURBINES |
EFFICIENCY OF IMPULSE BLADING |
Ratio of the delivered poweror energy, to the power or energy supplied in kinetic form to an impulseblade. |
| GAS TURBINES |
ERICSON CYCLE |
The gas turbine cycle which incorporates multistagecompression with intercooling, and multistage expansion with reheating. |
| GAS TURBINES |
FLAME STABILIZATION |
Making the flame to be more or less stable ata particular location in the combustion chamber by a system whereby part of the high temperature products of combustion can be caused torecirculate in order to ignite fresh reactants. |
| GAS TURBINES |
FLOW COEFFICIENT |
Ratio of axial components of absolute velocity of fluid stream to the blade velocity at that location. |
| GAS TURBINES |
FLOW LOSSES |
Pressure loss due to friction and turbulence. This consistsof combustion chamber loss, heat exchanger loss (air side), heatexchanger loss (gas side), intercooler loss (air side) and duct lossesoccurring between components and at intake and exhaust. |
| GAS TURBINES |
FLUID ANGLES |
Angles at which the fluid enters and leaves a blade.These are seldom the same as the blade angles. |
| GAS TURBINES |
FOIL NOZZLE |
A nozzle formed by curved airfoil sections or facsimilesof airfoils and is characterised by its high efficiency. |
| GAS TURBINES |
FREE VORTEX FLOW |
In a compressor, the condition when the whirlvelocity of a flowing fluid varies inversely as the radius. |
| GAS TURBINES |
FUEL RATIO |
The weight of fuel used to heat unit weight of compressedair to the turbine inlet temperature. |
| GAS TURBINES |
FULL ADMISSION |
Admission of gas stream over the full blade entry,and this becomes possible when the nozzles subtend the whole bladecircumference (annulus area). |
| GAS TURBINES |
GAGING |
Ratio of the net area of gas flow to the total free annular area inthe blade ring. |
| GAS TURBINES |
GAS TURBINE |
A rotary machine, which consists of a compressor,combustion chamber and a turbine. Air is compressed in thecompressor, passed into the combustion chamber where fuel is burnt,products of combustion impinge over rings of turbine blades withhigh
velocity and work is done. |
| GAS TURBINES |
GUIDE BLADES |
Row of blades interposed between the blade rowscomprising rotor passages, so as to reverse the direction of the fluidleaving the preceding moving blade row and make the general directionof the fluid entering all the moving blade rows to be similar. |
| GAS TURBINES |
HEAT EXCHANGER |
Device which uses some of the heat in the turbineexhaust gas to preheat the air entering the combustion chamber. Thisreduces the fuel supply for a given required temperature increase. Alsocalled REGENERATOR. |
| GAS TURBINES |
HEAT EXCHANGER THERMAL RATIO |
Ratio of the actual heat pickedup by the compressed air in the heat exchanger to the maximum possibleheat that could be absorbed. Also called EFFECTIVENESS OF HEATEXCHANGER. |
| GAS TURBINES |
INTER COOLING |
Cooling of air in between the stages of compressionso as to reduce the work of compression. The device used for coolingis intercooler. |
| GAS TURBINES |
INTERNAL EFFICIENCY OF A TURBINE |
Ratio of work (power)delivered to the rotor of the turbine by the gaseous medium compared with the ideal energy available for work (power) from the medium inexpanding through the same pressure range. |
| GAS TURBINES |
ISENTROPIC EFFICIENCY |
Ratio of work to compress isentropically to the actual work to compress. Also the ratio of isentropic temperaturerise to the actual temperature rise. |
| GAS TURBINES |
JET PROPULSION |
The unit in which the gas turbine is designed toproduce just sufficient power to drive the compressor and the exhaustgases from the turbine are then expanded to atmospheric pressure in apropelling nozzle to produce a high velocity jet. |
| GAS TURBINES |
LACING WIRES |
Wires called lacing wires or lashing wires are used tokeep long blades in alignment and to add stiffness. |
| GAS TURBINES |
LEAKAGE LOSSES |
Energy loss due to leakage of the working fluid inturbines, between stages, past the shaft and around the balance piston. |
| GAS TURBINES |
MACH NUMBER-M |
Ratio of the stream velocity to the local acoustic velocity. |
| GAS TURBINES |
MULTI SHAFT GAS TURBINE |
Turbine unit in which two or morecompressor combinations or turbines are carried on independent shafts.In each turbine compressor combination, the machines are coupledto each other in a series arrangement. |
| GAS TURBINES |
NET JET THRUST |
That part of the thrust of a turbojet engine which isavailable for climb and acceleration. |
| GAS TURBINES |
NOZZLE |
A flow passage specially shaped to produce kinetic energy at theexpense of other forms of energy (available thermal energy). |
| GAS TURBINES |
NOZZLE EFFICIENCY |
The ratio of the actual kinetic energy producedon discharge (or between any two points in a nozzle) to that obtainableby assuming an isentropic expansion in the nozzle. |
| GAS TURBINES |
ONE DIMENSIONAL FLOW |
The fluid flow in which the variables areconstant over any cross-section of the flow. |
| GAS TURBINES |
OPEN CYCLE TURBINE |
Turbine in which the heat is transferred by direct combustion and after doing work in the turbine, the gases areexhausted into the atmosphere. |
| GAS TURBINES |
OVERALL EFFICIENCY OF JET PROPULSION |
Product of thepropulsion efficiency of the jet unit and the thermal efficiency of the jet unit. |
| GAS TURBINES |
OVERALL EFFICIENCY OF PROPELLER UNIT |
Product of thepropeller (propulsion) efficiency, thermal efficiency of the engine(power turbine) and the transmission efficiency from prime mover topropeller shaft. |
| GAS TURBINES |
OVERALL TURBINE EFFICIENCY |
Ratio of the delivered shaft work (power) to the ideal energy available from the medium. |
| GAS TURBINES |
PARALLEL FLOW HEAT EXCHANGER |
A heat exchanger in whichboth compressed air and gases let out by the turbine flow in the samelongitudinal direction. Also called UNI DIRECTIONAL orCOCURRENT HEAT EXCHANGER. |
| GAS TURBINES |
PARTIAL ADMISSION |
Admission of gas stream over only a part of theblade circumference, since the nozzles are covering only a fraction of the inlet blade circumferential annulus. This is the case in impulseturbines. |
| GAS TURBINES |
PLANE SHOCK WAVE |
Shock wave in which the variables of flow egopressure, temperature and velocity are constant along the wave front. |
| GAS TURBINES |
POLYTROPIC EFFICIENCY |
The isentropic efficiency of an elementalstage of the compression which is constant throughout the process. Also called the SMALL STAGE EFFICIENCY. |
| GAS TURBINES |
POSITIVE DISPLACEMENT COMPRESSOR |
Type of compressor in which a fixed amount of working fluid is being positively containedduring its passage through the machine. |
| GAS TURBINES |
POWER INPUT FACTOR |
For a compressor this is the ratio of the actual work to the theoretical work of compression. Represents an increase inthe work input the whole of which is absorbed in overcoming frictionalloss and which is therefore degraded into heat energy. |
| GAS TURBINES |
POWER RATIO |
Ratio of useful or net horse power of the cycle compared with the power developed by the turbine of the system. Also called WORK RATIO. |
| GAS TURBINES |
PRESSURE COMPOUNDED IMPULSE TURBINE |
The turbine in which the pressure range available for expansion is broken into a seriesof steps or stages. Each stage consists of a nozzle or bank of nozzles(which increase the kinetic energy) followed by a row of turbine bladesor buckets (which
absorb the kinetic energy). |
| GAS TURBINES |
PRESSURE RATIO |
Ratio of pressure of air at the end of compression tothe pressure of air at the begining of compression. |
| GAS TURBINES |
PREWHIRL |
Whirl velocity (tangential component of the absolute velocity at intake), imparted to the air that enters the centrifugal compressorimpeller, by allowing the air to be drawn into the impeller eye overcurved inlet guide vanes attached to the impeller
casing. |
| GAS TURBINES |
PRIMARY AIR |
Part of the air which flows through the core of thecombustion chamber, in just sufficient quantity for combustion. |
| GAS TURBINES |
PRIMARY ZONE |
Portion of the combustion chamber wherein about 15 to20% of the air is introduced around the jet of fuel and the burning of thisrich mixture provides the high temperature necessary to prepare the mixturefor further reaction and burn it almost
completely in a very short time. |
| GAS TURBINES |
PROPELLER JET ENGINE |
The unit in which the gas turbine developspower in excess of that required to drive the compressor and employsthis excess power to drive a propeller through reduction gearing andthe leaving jet also contributes to the thrust power. |
| GAS TURBINES |
PROPULSION EFFICIENCY |
Ratio of thrust power to the jet power. |
| GAS TURBINES |
RAM EFFECT |
The effect which causes an increase of temperature andpressure of the air that enters the compressor of an aircraft gas turbineunit due to aircraft speed. Sometimes called RAM. |
| GAS TURBINES |
RAM EFFICIENCY |
Actual pressure rise realized in a diffuser compared with the pressure rise possible under reversible conditions. Also calledINTAKE EFFICIENCY. |
| GAS TURBINES |
REACTION TURBINE |
The turbine in which the nozzles and movingblades are each made in the same general form, with the cross-section inthe direction of the gas flow reduced so that both the fixed and movingblades act as expanding nozzles. |
| GAS TURBINES |
REGENERATIVE PLANT |
The plant that utilizes a heat exchanger torecover heat from the turbine exhaust gases and thereby decreases theheat required to be added in the combustor. |
| GAS TURBINES |
REHEAT CYCLE |
The unit in which the expansion of the hot gases iscarried out in two stages, and reheating of the working fluid to theupper limit of temperature takes place between the stages of expansion. |
| GAS TURBINES |
ROCKET |
A self propelled unit in which the fuel and the oxidant arecontained within the shell. |
| GAS TURBINES |
SECONDARY AIR |
Air quantity which is about five times the minimumair for combustion, that flows around the annular space of thecombustion chamber and cools the products of combustion. |
| GAS TURBINES |
SECONDARY ZONE |
Portion of the combustion chamber wherein about30% of air is added at the right points in the combustion process so asto complete the combustion of fuel. |
| GAS TURBINES |
SHAFT, ROTOR, SPINDLE |
The rotating assembly of the turbine whichcarries the blades. |
| GAS TURBINES |
SHROUD |
A band placed around the periphery of the blade tips in order tostiffen the blades and prevent spillage of the fluid over the blade tips. Shroudsmay be continuous or in segments integral with one or more blades. |
| GAS TURBINES |
SINGLE SHAFT GAS TURBINE |
Turbine unit in which all compressorsand turbines in the plant are mounted on one shaft and are coupled inseries arrangement. |
| GAS TURBINES |
SLIP |
The failure of the whirl velocity of air at the outlet of the centrifugalimpeller becoming equal to the impeller tip speed. |
| GAS TURBINES |
SLIP FACTOR |
Ratio of whirl velocity of air at the outlet of the compressor(centrifugal type) to the impeller tip speed. This factor limits the work capacity of the compressor even under isentropic conditions. |
| GAS TURBINES |
SOLIDITY OF A BLADE |
The ratio of blade chord to pitch, and rangesfrom 1.0 to 2.0. |
| GAS TURBINES |
SONIC VELOCITY |
Speed of sound in a gas. This is the velocity at whicha pressure wave is propagated throughout the gas and this velocity depends upon the pressure and density of the gas. |
| GAS TURBINES |
SPECIFIC POWER |
Net horse power developed per kg per second of airflow. |
| GAS TURBINES |
STAGGER ANGLE |
The angle made by the axial direction and the chordline, a parameter describing the setting of a row of blades of givenform and spacing. |
| GAS TURBINES |
STAGE OF A TURBINE |
Unit which consists of the fixed nozzle row (orfixed blade row) and the moving row of blades which receives thegases. |
| GAS TURBINES |
STAGNATION ENTHALPY |
Enthalpy of a moving gas when broughtto rest isentropically. Also called TOTAL HEAD. |
| GAS TURBINES |
STAGNATION TEMPERATURE |
The hypothetical temperature which would result if all the kinetic energy of a flowing gas were to beconverted into heat under conditions of no gain or loss of heat i.e.,adiabatic conditions. Also called TOTAL HEAD TEMPERATURE.This is the sum
of static temperature and dynamic temperature. |
| GAS TURBINES |
STALLING |
The phenomenon of reduction in the lift force (acting on an airfoil) at higher angles of incidence. Also called LIMIT OF STABILITY. |
| GAS TURBINES |
STATIC HEAD EFFICIENCY |
Ratio of the temperature equivalent of the work output and leaving energy to the isentropic temperaturedrop from the total head inlet to the static outlet pressure. |
| GAS TURBINES |
STEADY FLOW |
Flow of fluid in which the quantities such as velocity,pressure, temperature etc., may change from point to point but they do not vary with time at any particular point. |
| GAS TURBINES |
STRAIGHT COMPOUNDED UNIT |
The system in which the low pressure compressor is driven by the low pressure turbine and thehigh pressure compressor by the high pressure turbine. Power is takenfrom the low pressure turbine shaft. |
| GAS TURBINES |
SUBSONIC DIFFUSER |
A diffuser having a diverging cross-section inthe direction of flow. |
| GAS TURBINES |
SUPERSONIC DIFFUSER |
A diffuser having a converging cross-sectionin the direction of flow. |
| GAS TURBINES |
SYMMETRIC STAGE AXIAL FLOW COMPRESSOR |
An axial flow compressor which has symmetric blade arrangement so that thepressure rise in the moving row and the pressure rise in the fixed row are equal. |
| GAS TURBINES |
TAPERED BLADES |
The turbine blades taper (decrease in depth) frombase to tip, so as to diminish the centrifugal stress at the various sections,at the base or hub sections of the blade. |
| GAS TURBINES |
TERTIARY ZONE |
Portion of the combustion chamber wherein the leftout 50% of air is mixed with the burnt gases so as to cool them downto the temperature suitable to turbine materials. |
| GAS TURBINES |
THRUST OF A JET |
Sum total of the pressure thrust and that due tochange of momentum. |
| GAS TURBINES |
TOTAL HEAD EFFICIENCY |
Ratio of the actual work output to themaximum possible work output that could be obtained with theexisting leaving energy. |
| GAS TURBINES |
TOTAL HEAD PRESSURE |
Pressure of the moving fluid correspondingto the stagnation or total head temperature. |
| GAS TURBINES |
TURBINE MECHANICAL EFFICIENCY |
Ratio of shaft horse powerto rotor (internal) horse power. |
| GAS TURBINES |
TURBINE STAGE EFFICIENCY |
Ratio of the work delivered to therotor per unit of gas flowing divided by the isentropic drop availablein each unit of gas flowing. |
| GAS TURBINES |
TURBO PROP UNIT |
The unit in which the gas turbine drives a propellerand the gases after leaving the turbine are exhausted as a jet to augmentthe thrust of the propeller. |
| GAS TURBINES |
TWISTED BLADES |
Long turbine blades are usually twisted from hubto tip so as to compensate for blade velocity variations and in somecases as well as to satisfy radial pressure equilibrium conditions. |
| GAS TURBINES |
VELOCITY COMPOUNDED IMPULSE TURBINE |
The turbine in which the kinetic energy created by the expansion of gas in nozzles isabsorbed in two or more rows of moving blades so as to reduce thespeed of the turbine rotor. |
| GAS TURBINES |
VOLUMETRIC EFFICIENCY |
Ratio of the equivalent volume of freeatmospheric air finally delivered by a compressor to the volume of free atmospheric air entering the suction pipe of the compressor. |
| GAS TURBINES |
WINDAGE LOSSES |
When moving blades come in contact with inactivefluid, some kind of kinetic energy is imparted to the fluid at the expenseof the kinetic energy of the blades. There is also frictional effect. Thisloss is known as windage losses. |
| GAS TURBINES |
WORK RATIO |
The ratio of the actual work output (in heat units) to theisentropic heat drop from the total head inlet to the static outletconditions. |
| INTERNAL COMBUSTION ENGINE PARTS |
AFTER COOLER |
A device used on turbocharged engines to cool air which has undergone compression. |
| INTERNAL COMBUSTION ENGINE PARTS |
ATDC |
After TDC, After top dead centre. |
| INTERNAL COMBUSTION ENGINE PARTS |
AIR CLEANER |
A device mounted on the intake manifold for filteringout unwanted solid impurities such as dirt and dust from air that isbeing drawn into the engine cylinder through the inlet manifold. |
| INTERNAL COMBUSTION ENGINE PARTS |
AIR COOLED ENGINE |
An engine that is cooled by passage of air aroundthe cylinder, not by passage of a liquid through water jackets. |
| INTERNAL COMBUSTION ENGINE PARTS |
AIR STANDARD CYCLE |
A standard cycle of reference by which theperformance of the different internal combustion engines may becompared, and their relative efficiencies calculated. |
| INTERNAL COMBUSTION ENGINE PARTS |
AKROYD ENGINE |
The first compression ignition engine, patented by Akroyd Staurt in 1890. |
| INTERNAL COMBUSTION ENGINE PARTS |
ALUMINIUM CYLINDER BLOCK |
An engine cylinder block cast fromaluminium or aluminium alloy, and which usually has cast iron sleevesinstalled for use as cylinder bores. |
| INTERNAL COMBUSTION ENGINE PARTS |
ANTIFREEZE |
A chemical, added to the coolant (usually ethylene glycol)to lower its freezing point and thereby prevent the coolant from freezingin cold weather. |
| INTERNAL COMBUSTION ENGINE PARTS |
ANTI ICING SYSTEM |
A carburettor unit designed to prevent formationof ice on a surface or in a passage. |
| INTERNAL COMBUSTION ENGINE PARTS |
ARTICULATED CONNECTING ROD |
The auxiliary connecting rodsof a radial engine, which work on pins carried by the master rod insteadof on the main crankpin. Also called LINK RODS. |
| INTERNAL COMBUSTION ENGINE PARTS |
BACK PRESSURE |
A pressure exerted by a fluid contrary to the pressureproducing the main flow. For example, pressure in the exhaust manifold,the higher the back pressure, greater is the resistance to flow of exhaustgases through the exhaust system. This lowers
volumetric efficiency. |
| INTERNAL COMBUSTION ENGINE PARTS |
BARREL |
Refers to the cylinders in an engine or to the number of throttlebores in a carburettor. |
| INTERNAL COMBUSTION ENGINE PARTS |
BARREL TYPE CRANKCASE |
A petrol engine crankcase so constructedthat the crankshaft can be removed from one end, in more normalconstruction, the crankcase is split. |
| INTERNAL COMBUSTION ENGINE PARTS |
BASE CIRCLE |
As applied to camshaft, lowest spot on the cam. Area of cam that is directly opposite lobe. |
| INTERNAL COMBUSTION ENGINE PARTS |
BELLOWS |
A device, usually metal that can lengthen or shorten much likean accordian. Some cooling system thermostats are of bellows type. |
| INTERNAL COMBUSTION ENGINE PARTS |
BIMETAL |
A thermostatic bimetal element made up of two different metals with different heat expansion rates. Temperature changes produce abending or distortion movement of the element. |
| INTERNAL COMBUSTION ENGINE PARTS |
BLOCK (engine) |
Basic part of the engine casting containing cylinders. |
| INTERNAL COMBUSTION ENGINE PARTS |
BLOWBY |
Piston rings do not effectively seal compression pressure, and assuch allows hot gases to blow between rings and cylinder wall into thecrankcase. This causes overheating of piston and poor performance. |
| INTERNAL COMBUSTION ENGINE PARTS |
BLOWER |
Supercharger or engine intake air compressor, a low pressure airpump, usually rotary or centrifugal type. |
| INTERNAL COMBUSTION ENGINE PARTS |
BLUE PRINTING (engine) |
Dismantling the engine and reassembling itto exact specifications. |
| INTERNAL COMBUSTION ENGINE PARTS |
BOOST |
The amount by which the induction pressure of a super chargedinternal combustion engine exceeds atmospheric pressure, expressedin kg/sqcm. |
| INTERNAL COMBUSTION ENGINE PARTS |
BORE |
A cylinder, hole, or the inside diameter of the cylinder or hole. May refer to cylinder itself or to diameter of the cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
BORE DIAMETER |
Diameter of a hole or a cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
BORING |
Renewing or enlarging cylinders by cutting and honing them toa specified size. Boring bar is used to make the cut. |
| INTERNAL COMBUSTION ENGINE PARTS |
BORING BAR |
Tool used to cut engine cylinders to specific size. As usedin garages, to cut worn cylinders to a new diameter. |
| INTERNAL COMBUSTION ENGINE PARTS |
BOTTOM DEAD CENTER (BDC) |
Lowest position of the piston inthe cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
BOXED I ROD |
Connecting rod in which I beam section has been stiffenedby welding plates on each side of the rod. |
| INTERNAL COMBUSTION ENGINE PARTS |
BRAKE HORSE POWER (BHP) |
Actual usable power delivered by anengine at the crankshaft for driving a vehicle or any other unit.Computed using the engine coupled to a dynamometer. |
| INTERNAL COMBUSTION ENGINE PARTS |
BRAKE MEAN EFFECTIVE PRESSURE (BMEP) |
Mean effectivepressure (imaginary) which when assumed to be acting on the pistonduring the power stroke would result in the given brake horse poweroutput. Equal to mean indicated pressure times mechanical efficiency. |
| INTERNAL COMBUSTION ENGINE PARTS |
BRAKE THERMAL EFFICIENCY |
Ratio of heat equivalent of poweroutput in the form of brake horse power to the corresponding heatinput from fuel. |
| INTERNAL COMBUSTION ENGINE PARTS |
BREAKIN |
Period of operation between installation of new or rebuilt partsand when the parts are worn to the correct fit. Driving at reduced andvarying speed for a specified distance or duration permits parts to wearout to the correct fit. |
| INTERNAL COMBUSTION ENGINE PARTS |
BREATHER PIPE |
A pipe opening into the interior of an engine i.e.,crankcase. Used to assist ventilation. |
| INTERNAL COMBUSTION ENGINE PARTS |
BTDC |
Before top dead center, also called BUDC-before upper dead center. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAM |
A rotating lobe of irregular shape or eccentric or offset portion of theshaft (cam). It changes rotary motion of cam shaft to reciprocating orvariable motion of valve lifter resting on it. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAM FOLLOWER (valve lifter) |
A part which is held in contact with the camand to which the cam motion is imparted and transmitted to the push rod. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAM GROUND PISTON |
A piston that is ground slightly oval in shape.It becomes round as it expands with heat. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAM NOSE |
Also called CAM LOBE. That portion of the cam whichholds the valve wide open. It is the high point of the cam. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAM SHAFT |
The shaft in the engine which has a series of cam lobes(simply called cams) for operating the valve mechanisms, driven by gears or sprockets and chain from the crankshaft. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAM SHAFT GEAR |
The gear that is fastened to the cam shaft. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAST IN SLEEVE |
An aluminium cylinder block cast around an ironcylinder sleeve. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAST IRON CYLINDER |
A one piece cylinder assembly made of castiron with a machined bore. |
| INTERNAL COMBUSTION ENGINE PARTS |
CAST PISTON |
A piston made by pouring molten aluminium alloy intothe mould of desired shape. |
| INTERNAL COMBUSTION ENGINE PARTS |
CENTRIFUGAL GOVERNOR |
A governor which uses flyweight forceto sense speed, in order to control the amount of fuel supplied to thecombustion chambers. |
| INTERNAL COMBUSTION ENGINE PARTS |
CENTRIFUGAL OIL SLINGER |
Cup shaped centrifugal oil filtermounted to the end of the crankshaft. As oil passes through the slinger,centrifugal force removes impurities that are heavier than oil. |
| INTERNAL COMBUSTION ENGINE PARTS |
CHROME PLATED RING |
A piston compression or oil ring that has itscylinder wall face lightly plated with hard chrome. |
| INTERNAL COMBUSTION ENGINE PARTS |
CIRCLIP |
A circular clip or snap ring that fits into a groove, used to locateor retain a shaft or component. |
| INTERNAL COMBUSTION ENGINE PARTS |
CLEARANCE |
The amount of space between two moving parts or betweena moving and a stationary part, such as a journal and a bearing, pistonand cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
CLEARANCE VOLUME |
The volume remaining above the piston whenthe piston is at TDC. |
| INTERNAL COMBUSTION ENGINE PARTS |
CLOSED CRANKCASE VENTILATION SYSTEM |
A system in whichthe crankcase vapours (blow by gases) are discharged into the engineintake system and pass through the engine cylinder rather than beingdischarged into the air. |
| INTERNAL COMBUSTION ENGINE PARTS |
COATED BORE |
Thin coating of chrome or iron applied to the inside of the cylinder by electroplating, or wire explosion spray coating. |
| INTERNAL COMBUSTION ENGINE PARTS |
COATED RING |
A piston ring having its cylinder wall face coated withferrous oxide, soft phosphate or tin. This thin coating helps new ringsto seat by retaining oil and reduces scuffing during breakin. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMBUSTION CHAMBER |
The space at the top of the cylinder and inthe cylinder head or piston or both, in which combustion of fuel andair charge takes place. The space enclosed by the piston, when the pistonis at TDC. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMBUSTION CHAMBER VOLUME |
The volume of the combustionchamber when the piston is at TDC, measured in cubic centimeters. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMBUSTION CYCLE |
A series of thermodynamic processes through which the working gas passes to produce one power stroke. The fullcycle is intake, compression, power and exhaust. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION CHECK |
Measurement of compression pressure in allthe cylinders at cranking speed. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION PRESSURE |
Pressure in the combustion chamber at theend of the compression stroke, but without any of the fuel being burned. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION RATIO |
The ratio between the total volume of the cylinder when the piston is at BDC and the volume when the piston is at TDC. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION RELEASE |
A device to prevent the intake valve or exhaustvalve from closing completely. This permits the engine crankshaft tobe turned over without compression and with ease. Also calledDECOMPRESSOR. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION RINGS |
The upper ring or rings on a piston designed tohold the compression in the cylinder and prevent or reduce combustiongas leakage i.e., blowby. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION STROKE |
The piston stroke from BDC to TDC during which both valves are closed and the charge is compressed into a smallerspace creating heat by molecular action. |
| INTERNAL COMBUSTION ENGINE PARTS |
COMPRESSION TESTER |
An instrument for testing the amount of pressure, or compression, developed in an engine cylinder duringcranking. Also called COMPRESSION GAUGE. |
| INTERNAL COMBUSTION ENGINE PARTS |
CONNECTING ROD |
The rod made of steel or aluminium alloy usually having an I beam cross-section. A piston pin connects the connectingrod and the piston. |
| INTERNAL COMBUSTION ENGINE PARTS |
CONNECTING ROD BEARING |
Bearings used in the connecting rodsmall end or big end holes. |
| INTERNAL COMBUSTION ENGINE PARTS |
CONNECTING ROD CAP |
The part of the connecting rod big endassembly that attaches the rod to the crankpin. |
| INTERNAL COMBUSTION ENGINE PARTS |
CONNECTING ROD TIP |
Amount of radial (side) play at the top of the connecting rod. Measurement of rod tip is one way of determiningthe condition of the rod big end bearing. |
| INTERNAL COMBUSTION ENGINE PARTS |
CONTROLLED PORT SCAVENGING |
Scavenging method using ports which are controlled by valves in addition to the power piston. |
| INTERNAL COMBUSTION ENGINE PARTS |
COOLANT |
The liquid mixture of antifreeze and water circulated in thecooling system of an engine or machinery. |
| INTERNAL COMBUSTION ENGINE PARTS |
COOLING SYSTEM |
In an engine, the system that removes heat by thenatural or forced circulation of the coolant and thereby prevents engineoverheating. It includes the water jackets, water pump, radiator andthermostat, or cooling fins, blower and cowl. |
| INTERNAL COMBUSTION ENGINE PARTS |
CORE (radiator) |
A number of coolant passages surrounded by fins through which air flows to carry away heat from the coolant. |
| INTERNAL COMBUSTION ENGINE PARTS |
COUNTER FLOW CYLINDER HEAD |
has the intake and exhaustpassages on the same side of the cylinder head. |
| INTERNAL COMBUSTION ENGINE PARTS |
COUNTER WEIGHT |
Weights that are mounted on the crankshaftopposite each crankthrow. These reduce the vibration caused by thecrank and also reduce bearing loads due to inertia of the moving parts. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANK |
A device for converting reciprocating motion into rotary motionor vice versa. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKCASE |
The lower part of an engine in which the crankshaft rotates.It consists of the lower section of the cylinder block, and the oil pan. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKCASE VENTILATING SYSTEM |
The system that permits air toflow through the engine crankcase when the engine is running to carryoutthe blowby gases and relieve any pressure build up. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKPIN |
That part of the crankthrow of the crankshaft to which theconnecting rod is attached. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKPIN RIDGING |
A type of crankpin failure typified by deep ridges worn into the crankpin bearing surfaces. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKSHAFT |
The main rotating member, or shaft running along thelength of the engine. Portions of the shaft are offset to form throws orcranks to which the connecting rods are attached. Crankshaft issupported by mainbearings. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKSHAFT AXLES |
Extension at each end of the crankshaft to provide amounting place for main bearings, and alternator rotor of magneto flywheel. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKSHAFT GAUGE |
A special type of micrometer which can measurecrankshaft wear without removing the crankshaft from the block. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKSHAFT GEAR |
A gear or sprocket, mounted on the front of thecrankshaft. Used to drive the camshaft gear or chain. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANKSHAFT WHEEL |
Portions of an assembled crankshaft, in the formof wheels that provide a mounting place for crankpin and crankaxles. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANK THROW |
One crankpin with its two webs (the amount of offsetof the journal). |
| INTERNAL COMBUSTION ENGINE PARTS |
CRANK WEB |
The portion of the crank throw between the crankpin andmain journal. This makes up the offset. |
| INTERNAL COMBUSTION ENGINE PARTS |
CRITICAL SPEEDS |
Speeds at which the frequency of the power strokessynchronize with the crankshafts natural frequency. If the engine isoperated at one of its critical speeds for any length of time, a brokencrankshaft may result. |
| INTERNAL COMBUSTION ENGINE PARTS |
CROSS FLOW CYLINDER HEAD |
has the intake and exhaust lines onopposite sides of the cylinder head. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYCLE |
A series of events which continuously repeat in definite order. Inan engine, the cycle constitutes the four operations that complete the working process and produce power. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER |
A round hole or tubular shaped structure in a block or castingin which a piston reciprocates. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER BLOCK |
The basic framework of the engine to which theother engine parts are attached. It includes the engine cylinders andthe upper part of the crankcase. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER BORE |
Diameter of cylinder opening. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER BORING |
Bore diameter in a cylinder machined to acceptoversize piston. This renews a worn cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER DEGLAZING |
Use of a hone to slightly roughen the cylinder walls. It produces a cross hatch pattern which aids in seating of new rings. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER HEAD |
The part that encloses the cylinder bores, used tocover tops of cylinders. Metal section bolted on top of block. It containsthe water jackets, and on I head engines, the valves. Also forms part of combustion chamber. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER HONE |
An expandable rotating tool with abrasive fingersturned by an electric motor, used to clean and smooth the inside surfaceof a cylinder to exact measurements. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER LEAKAGE TESTER |
A type of cylinder tester that forcescompressed air into the cylinder through the sparkplug hole when thevalves are closed and the piston is at TDC on the compression stroke.The percentage of compressed air that leaks out is measured, and thesource
of leakage accurately pin points the defective part. |
| INTERNAL COMBUSTION ENGINE PARTS |
CYLINDER SLEEVE |
A replaceable sleeve, or liner, put into the cylinderblock to form the cylinder bore. It is either pressed or pushed into thecylinder block. |
| INTERNAL COMBUSTION ENGINE PARTS |
DEAD CENTER |
Point at which the piston reaches its uppermost orlowermost position in the cylinder. At these positions, at the end of the stroke, the crank and connecting rod are in a straight line. |
| INTERNAL COMBUSTION ENGINE PARTS |
DECARBONIZE |
To remove carbon build up on piston, combustionchamber and other parts. |
| INTERNAL COMBUSTION ENGINE PARTS |
DECOMPRESSOR |
is the device that opens the engine intake or exhaustvalve and retains it in the opened position. The compression effect isthus reduced and helps easy rotation of the crankshaft at the time of starting. |
| INTERNAL COMBUSTION ENGINE PARTS |
DIPSTICK |
The metal stick that passes into the oil sump. Used to determinequantity of oil in the engine sump. |
| INTERNAL COMBUSTION ENGINE PARTS |
DIRECT COOLED PISTON |
A piston which is cooled by the internalcirculation of a liquid. |
| INTERNAL COMBUSTION ENGINE PARTS |
DISPLACEMENT |
In an engine, the total volume of fresh charge an engineis theoretically capable of drawing into all cylinders during one operatingcycle. The space swept through by the piston in all cylinders in movingfrom one end of a stroke to the other. |
| INTERNAL COMBUSTION ENGINE PARTS |
DOHC ENGINE |
An engine having two camshafts over each line of cylinders, one operating intake valves, and the other operating exhaustvalves. Double overhead camshaft engine. |
| INTERNAL COMBUSTION ENGINE PARTS |
DRY SLEEVE |
A cylinder sleeve (liner) where the sleeve is supported in thecylinder block metal over its entire length. The coolant does not touchthe sleeve itself. |
| INTERNAL COMBUSTION ENGINE PARTS |
DYNAMOMETER |
A device for absorbing and measuring the power output,or brake horse power, of an engine. May be an engine dynamometer, which measures power output at the flywheel, or a chassis dynamometer, which measures the power output at the driven wheels. |
| INTERNAL COMBUSTION ENGINE PARTS |
ELEMENT FILTER |
A disposable oil or air filter that uses gauze or paperas filtering material. |
| INTERNAL COMBUSTION ENGINE PARTS |
ENBLOCK |
One piece, such as an engine cylinder block cast in one piece. |
| INTERNAL COMBUSTION ENGINE PARTS |
ENGINE |
A machine that converts heat energy into mechanical energy (mechanical action in a car). The assembly that burns fuel to producepower, sometimes referred to as the power plant. |
| INTERNAL COMBUSTION ENGINE PARTS |
ENGINE DISPLACEMENT |
Volume of space through which head of piston moves in full length of its stroke multiplied by the number of cylinders in the engine. Result is given in cubic centimetres. |
| INTERNAL COMBUSTION ENGINE PARTS |
ENGINE TUNE UP |
The procedure for checking and adjusting the variousengine components so that the engine is restored to top operatingcondition. |
| INTERNAL COMBUSTION ENGINE PARTS |
ETHYLENE GLYCOL |
A chemical compound (solution) added to theengine coolant to reduce its freezing point and thereby protect thecooling system against freezing of the coolant. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST CUTOUT |
Y shaped device placed in the exhaust pipe of anengine ahead of muffler. Driver may channel exhaust through themuffler or into the other leg of the Y where the exhaust gases pass out without going through the muffler. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST MANIFOLD |
A housing with a series of connecting pipesbetween the exhaust ports and the exhaust pipe through which hotburned gases from the engine cylinders flow. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST PIPE |
Pipe connecting exhaust manifold to the muffler. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST PORT |
The opening through which exhaust gases pass fromthe cylinders to the manifold. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST STROKE |
The piston stroke from BDC to TDC during whichthe exhaust valve is open so that the burned gases are forced out fromthe cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST SYSTEM |
A group of parts consisting of the exhaust manifold,exhaust pipe, muffler, tailpipe and resonator if used. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST TUNING |
Cutting exhaust pipe to such length that providesmaximum efficiency. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXHAUST VALVE |
The valve which opens to allow burned gases to exhaust fromthe engine cylinder into the exhaust manifold during the exhaust stroke. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXPANSION PLUG |
A plug that is slightly dished out and used to sealcore passages in the cylinder block and cylinder head. When driveninto place, it is flattened and expanded to fit tightly. |
| INTERNAL COMBUSTION ENGINE PARTS |
EXPANSION RATIO |
Ratio of the total volume when the piston is atBDC to the clearance volume when the piston is at TDC (normally equal to compression ratio). |
| INTERNAL COMBUSTION ENGINE PARTS |
EVAPORATIVE COOLING SYSTEM |
A cooling system in which theheat finally passes to atmosphere by evaporation of the coolant. Thissystem may be either open or closed. |
| INTERNAL COMBUSTION ENGINE PARTS |
FAN (cooling) |
The device on the front of the engine that rotates to draw cooling air through the radiator or around the engine cylinders. |
| INTERNAL COMBUSTION ENGINE PARTS |
FAST IDLE |
Engine idle speed when the carburettor fast idle cam is inoperation. A mechanism on the carburettor, connected to theautomatic choke, that holds the throttle valve slightly open when theengine is cold so that the engine will idle at the higher
rpm as long asthe choke is applied. |
| INTERNAL COMBUSTION ENGINE PARTS |
F HEAD ENGINE |
A type of engine in which some of the valves are in thecylinder head and some in the cylinder block, giving the F shapedappearance. |
| INTERNAL COMBUSTION ENGINE PARTS |
FILTER |
That part in the air, lubricating oil or fuel system through whichair, oil or fuel must pass so that dust, dirt or other contaminants areremoved. |
| INTERNAL COMBUSTION ENGINE PARTS |
FINS (engine) |
Thin metal projections on an air cooled engine cylinderand head, which greatly increase the heat radiating surfaces and helpcooling of the engine cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
FINS (radiator) |
Thin metal projections, over which cooling air flows, thatcarry heat away from the hot coolant passages to the passing air. |
| INTERNAL COMBUSTION ENGINE PARTS |
FIRING ORDER |
The numerical order in which the engine cylinders fire,or deliver their power strokes begining with No.1 cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
FLYWHEEL |
A heavy rotating metal wheel attached to the crankshaft whichhelps even out the power surges from the power strokes and also servesas part of the clutch and engine cranking system. Acts as power reservoir. |
| INTERNAL COMBUSTION ENGINE PARTS |
FLYWHEEL RING GEAR |
A gear fitted around the flywheel that is engagedby the teeth on the starting motor drive to crank the engine. |
| INTERNAL COMBUSTION ENGINE PARTS |
FORGED PISTON |
A piston made by hammering hot aluminium into amould of desired shape. |
| INTERNAL COMBUSTION ENGINE PARTS |
FOUR STROKE CYCLE |
The four piston strokes of intake, compression,power and exhaust which make up the complete cycle of events in thefour stroke cycle. |
| INTERNAL COMBUSTION ENGINE PARTS |
FRICTION HORSE POWER |
The power used up by an engine inovercoming its own internal friction, usually, it increases as engine speedincreases. |
| INTERNAL COMBUSTION ENGINE PARTS |
FUEL TANK |
The storage tank for fuel on the vehicle. |
| INTERNAL COMBUSTION ENGINE PARTS |
FULL FLOATING PISTON PIN |
is one which is free to rotate both inthe piston pin bosses and in the connecting rod small end. |
| INTERNAL COMBUSTION ENGINE PARTS |
FULL FLOW FILTER |
Type of oil filter in which all the oil from the oilpump flows through the filter. |
| INTERNAL COMBUSTION ENGINE PARTS |
GASKET |
A flat strip, usually of cork or other material, placed betweentwo non-moving, machined surfaces to provide a tight seal betweenthem and thereby prevent leakage. |
| INTERNAL COMBUSTION ENGINE PARTS |
GASKET CEMENT |
A liquid adhesive material, or sealer applied on gaskets,in some applications, the liquid layer of gasket cement is used as thegasket itself. |
| INTERNAL COMBUSTION ENGINE PARTS |
GLAZE (cylinder) |
The mirror like, very smooth finish that develops onengine cylinder walls during engine operation. |
| INTERNAL COMBUSTION ENGINE PARTS |
HEAT DAM |
In a piston top land a groove cut out to reduce the size of theheat path, allowing the piston skirt to run at lower temperature. |
| INTERNAL COMBUSTION ENGINE PARTS |
HEAT LAND RING |
A compression ring having the cross-sectional shapeof the letter L, used as top ring. |
| INTERNAL COMBUSTION ENGINE PARTS |
HELICOIL |
A rethreading device to repair worn or damaged threads. It isinstalled in a retapped hole to bring the screw thread down to theoriginal size. |
| INTERNAL COMBUSTION ENGINE PARTS |
HORSE POWER (hp) |
A measure of the mechanical power, or the rate at which work is done. One horse power equals 4500 mkg of work per minute. |
| INTERNAL COMBUSTION ENGINE PARTS |
IDLE SPEED |
The speed at which an engine runs without load when theaccelerator pedal is released. |
| INTERNAL COMBUSTION ENGINE PARTS |
I HEAD ENGINE |
An overhead valve (OHV) engine with the valves inthe cylinder head. |
| INTERNAL COMBUSTION ENGINE PARTS |
IMPELLER |
Finned wheel that produces pressure and flow when spun inan enclosed housing of oil pump or water pump. |
| INTERNAL COMBUSTION ENGINE PARTS |
INDICATED HORSE POWER (IHP) |
The power produced within theengine cylinders before deducting any frictional loss. |
| INTERNAL COMBUSTION ENGINE PARTS |
INERTIA |
Tendency of a stationary object to resist movement or tendency of a moving object to continue moving in same direction. |
| INTERNAL COMBUSTION ENGINE PARTS |
IN LINE ENGINE |
An engine in which all engine cylinders are in a singlerow, or line. |
| INTERNAL COMBUSTION ENGINE PARTS |
INTAKE MANIFOLD |
is a casting attached to the cylinder head in the case of a overhead valve engine or to the cylinder block in the case of a side valveengine. Through the intake manifold fresh charge enters the cylinders. |
| INTERNAL COMBUSTION ENGINE PARTS |
INTAKE STROKE |
The piston stroke from TDC to BDC during whichthe intake valve is open and the cylinder receives a charge of air fuelmixture in a SI engine or air alone in a CI engine. |
| INTERNAL COMBUSTION ENGINE PARTS |
INTAKE VALVE |
The valve that opens to permit fresh charge to enter thecylinder on the intake stroke. |
| INTERNAL COMBUSTION ENGINE PARTS |
INTERNAL COMBUSTION ENGINE (IC engine) |
An engine in whichthe fuel is burnt inside the engine. |
| INTERNAL COMBUSTION ENGINE PARTS |
JACKETS |
The water jackets that surround the cylinders through whichthe coolant passes. |
| INTERNAL COMBUSTION ENGINE PARTS |
KINETIC ENERGY |
Energy associated with motion. An internalcombustion engine produces kinetic energy (crankshaft rotation). |
| INTERNAL COMBUSTION ENGINE PARTS |
L HEAD ENGINE |
A type of engine with valves located in the cylinderblock, the combustion chamber is L shaped. |
| INTERNAL COMBUSTION ENGINE PARTS |
LIGHT LOAD TEST |
The test applied to storage batteries during whichthe voltage is measured while the battery is subjected to a light load,such as the car head lights. |
| INTERNAL COMBUSTION ENGINE PARTS |
LIQUID COOLED ENGINE |
An engine that is cooled by the circulationof the liquid coolant around the cylinders. |
| INTERNAL COMBUSTION ENGINE PARTS |
LOAD TEST |
A cranking motor test to measure the current drawn undernormal cranking load. |
| INTERNAL COMBUSTION ENGINE PARTS |
MAIN BEARINGS |
The cylinder block and crankcase unit is provided atthe bottom with split main bearings for supporting the crankshaft journals. |
| INTERNAL COMBUSTION ENGINE PARTS |
MANIFOLD |
Intake manifold or exhaust manifold. A casting connectinga series of outlets to a common opening. |
| INTERNAL COMBUSTION ENGINE PARTS |
MECHANICAL EFFICIENCY |
In an engine, the ratio between brakehorse power and indicated horse power. |
| INTERNAL COMBUSTION ENGINE PARTS |
MUFFLER |
In the exhaust, a device through which the exhaust gases mustpass and which muffles the sound. |
| INTERNAL COMBUSTION ENGINE PARTS |
NO LOAD TEST |
A cranking motor test in which the cranking motor isoperated without load, the current drawn and the armature speed at thespecified voltage are noted. |
| INTERNAL COMBUSTION ENGINE PARTS |
OIL CONTROL RING |
Piston ring designed to remove excess oil fromthe cylinder wall, usually bottom ring. |
| INTERNAL COMBUSTION ENGINE PARTS |
OIL SUMP |
is fastened to the bottom of the crankcase. This protects theengine from below and is used as a reservoir for lubricating oil in afour stroke engine. |
| INTERNAL COMBUSTION ENGINE PARTS |
OPPOSED CYLINDERS |
Cylinders positioned opposite each other inthe same plane. |
| INTERNAL COMBUSTION ENGINE PARTS |
O RING |
A circular cross-sectional sealing ring, which is compressed intothe groove to provide sealing action. Seal used in dynamic application where little or no rotational motion occurs. Also used as a static seal. |
| INTERNAL COMBUSTION ENGINE PARTS |
OTTO CYCLE |
The four operations, namely intake, compression, powerand exhaust form a cycle. Named after the inventor Nikolaus Ottoand is the basic cycle for all SI engines. |
| INTERNAL COMBUSTION ENGINE PARTS |
OVERCHARGING |
Continued charging of a battery after it has reached acharged condition. This action damages the battery and shortens its life. |
| INTERNAL COMBUSTION ENGINE PARTS |
OVERHEAD CAMSHAFT (OHC) ENGINE |
An engine in which thecamshaft is located in the cylinder head or heads instead of in thecylinder block. |
| INTERNAL COMBUSTION ENGINE PARTS |
OVERHEAD VALVE (OHV) ENGINE |
An engine in which the valves aremounted in the cylinder head above the combustion chamber, thecamshaft is usually mounted in the cylinder block, and the valves areactuated by push rods. |
| INTERNAL COMBUSTION ENGINE PARTS |
OVER SQUARE ENGINE |
An engine which has a bore larger in dimensionthan the length of the stroke. |
| INTERNAL COMBUSTION ENGINE PARTS |
PANCAKE ENGINE |
An engine with two rows of cylinders which areopposed and on the same plane, usually set horizontally in a vehicle. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON |
A cylindrical part, closed at one end, which moves up and downin the cylinder. Open end is attached to the connecting rod.Combustion pressure is exerted on closed end of piston, causingconnecting rod to move and crankshaft to turn. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON CROWN |
Top of piston, directly exposed to combustion pressureand heat. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON DISPLACEMENT |
The cylinder volume displaced by the pistonas it moves from the bottom to the top of the cylinder during onecomplete stroke. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON PIN |
Also called wrist pin. The cylindrical or tubular metal piecethat attaches the piston to the connecting rod. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON PIN BOSS |
A strengthened section of piston wall extending toinside of piston crown. It supports piston pin. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON PIN HOLE |
Machined hole through piston wall where pistonpin and retaining circlips are mounted. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON RINGS |
Rings fitted into grooves in the piston. These are twotypes: Compression rings for sealing the compression into thecombustion chamber and oil rings to scrape excess oil off the cylinder wall and thereby prevent it from working up into and burning
in thecombustion chamber. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON RING COATINGS |
of relatively soft substances such asphosphate, graphite, and iron oxide aid effective wear in and preventsrapid wear of the ring. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON RING COMPRESSOR |
A special tool used in engine overhaul work to compress the piston rings inside the piston grooves so thatthe piston and rings assembly may be installed in the engine cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON RING END GAP |
Distance between ends of a piston ring wheninstalled in the cylinder. The clearance is measured with a feeler gauge,keeping the piston at BDC. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON RING GROOVE |
Grooves machined in the piston external surfaceto accept piston rings. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON SEIZURE |
Overheating of piston to the point where it will nolonger move freely in the cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON SKIRT |
The lower part of the piston below the piston pin hole. |
| INTERNAL COMBUSTION ENGINE PARTS |
PISTON SLAP |
A hollow, muffled, bell like sound made by an excessively loose piston slapping the cylinder wall at dead centre positions. |
| INTERNAL COMBUSTION ENGINE PARTS |
POPPET VALVE |
A mushroom shaped valve, widely used in internalcombustion engines. |
| INTERNAL COMBUSTION ENGINE PARTS |
PORT (cylinder) |
In an engine, the valve port or opening in which thevalve operates and through which the charge or burned gases pass. |
| INTERNAL COMBUSTION ENGINE PARTS |
POWER |
Rate at which work is done. |
| INTERNAL COMBUSTION ENGINE PARTS |
POWER PLANT |
The engine or power producing mechanism in the vehicle. |
| INTERNAL COMBUSTION ENGINE PARTS |
POWER STROKE |
The piston stroke from TDC to BDC during whichthe charge burns and forces the piston down so that the engine producespower. |
| INTERNAL COMBUSTION ENGINE PARTS |
PRESSURE TESTER |
An instrument that clamps in the radiator fillerneck, and is used to pressure test the cooling system for leaks. |
| INTERNAL COMBUSTION ENGINE PARTS |
PREVENTIVE MAINTENANCE |
The systematic inspection, detectionand correction of failures in an engine or in a vehicle, either beforethey occur, or before they develop into major defects. |
| INTERNAL COMBUSTION ENGINE PARTS |
PUSH ROD |
In the I head engine, the rod between the valve lifter androcker arm. |
| INTERNAL COMBUSTION ENGINE PARTS |
RADIATOR |
A heat exchanger which reduces coolant temperature in aliquid cooling system. |
| INTERNAL COMBUSTION ENGINE PARTS |
RADIUS RIDE |
In a reground crankshaft, if the radius of the journal, whereit comes up to the crank cheek, is not cut away enough, the journal willride on the edge of the bearing. The contact is called radius ride. |
| INTERNAL COMBUSTION ENGINE PARTS |
REBORE |
To bore out a cylinder larger than its original size. |
| INTERNAL COMBUSTION ENGINE PARTS |
RECIPROCATING ENGINE |
Also called piston engine. An engine in which the piston moves up and down or back and forth, as a result of combustion in the top of the cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
RING EXPANDER |
A special tool used to expand piston rings for installationon the piston. |
| INTERNAL COMBUSTION ENGINE PARTS |
RING LAND |
Solid area of piston which supports rings, located betweenring grooves. |
| INTERNAL COMBUSTION ENGINE PARTS |
RING RIDGE |
A ridge left at the top of a cylinder as the cylinder wallbelow it is worn by piston ring movement. |
| INTERNAL COMBUSTION ENGINE PARTS |
RING RIDGE REMOVER |
A special tool used for removing the ringridge from the cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
ROCKER ARM |
In an I head engine, a device that rocks on a shaft orpivots on a stud as the cam actuates the push rod causing the valve toopen. |
| INTERNAL COMBUSTION ENGINE PARTS |
ROD BOLTS |
Special bolts used on the connecting rod to attach the cap.Sometimes lock nuts are provided. |
| INTERNAL COMBUSTION ENGINE PARTS |
ROD SMALL END |
The end of the connecting rod through which apiston pin passes to connect the piston to the connecting rod. |
| INTERNAL COMBUSTION ENGINE PARTS |
ROD BIG END |
The end of the connecting rod that attaches around thecrankpin. |
| INTERNAL COMBUSTION ENGINE PARTS |
RPM |
Revolutions per minute. |
| INTERNAL COMBUSTION ENGINE PARTS |
REVERSE FLUSHING |
A method of cleaning a radiator or an enginecooling system by flushing in the direction opposite to normal coolantflow. |
| INTERNAL COMBUSTION ENGINE PARTS |
SCORED |
Scratched or grooved, as a cylinder wall may be scored by abrasiveparticles moved up and down by the piston rings. |
| INTERNAL COMBUSTION ENGINE PARTS |
SCRAPER |
A device in engine service, to scrape carbon etc., from engineblock, piston etc. |
| INTERNAL COMBUSTION ENGINE PARTS |
SCRAPER RING |
On a piston, a type of oil control ring designed to scrapeexcess oil from cylinder wall and cause it to flow down into the crankcase. |
| INTERNAL COMBUSTION ENGINE PARTS |
SCREEN |
A fine mesh screen in the fuel or lubricating systems that preventslarge particles (dirt and particles of dust) from entering the system. |
| INTERNAL COMBUSTION ENGINE PARTS |
SCUFFING |
A type of wear of moving parts characterized by transfer of material from one to other part and results in pits and grooves. |
| INTERNAL COMBUSTION ENGINE PARTS |
SEALER |
A thick, tacky compound usually spread with a brush, whichmay be used as a gasket or sealant, to seal small openings or surfaceirregularities. |
| INTERNAL COMBUSTION ENGINE PARTS |
SEAT |
The surface on which another part rests, such as a valve seat. Also,applied to the process of a part wearing into fit, for example pistonrings seat after a few kilometers of driving. |
| INTERNAL COMBUSTION ENGINE PARTS |
SEMIFLOATING PISTON PIN |
is clamped in the piston pin bosses andfree to rotate in the connecting rod small end or clamped in theconnecting rod small end and free to rotate in the piston pin bosses. |
| INTERNAL COMBUSTION ENGINE PARTS |
SEVERE RINGS |
Piston rings which exert relatively high pressure against thecylinder walls, some times by the use of an expander spring behind the ring.Such rings can be used in an engine having excessive cylinder wear. |
| INTERNAL COMBUSTION ENGINE PARTS |
SHROUD |
A hood placed around an engine cooling fan to improve fan(cooling) action. |
| INTERNAL COMBUSTION ENGINE PARTS |
SIAMESED CRANKSHAFT |
Crankshaft configuration where two rodsare mounted on the same crankpin (journal). One rod is forked andthe other rod is mounted on inside of the fork. |
| INTERNAL COMBUSTION ENGINE PARTS |
SIDE BY SIDE CRANKSHAFT |
Crankshaft configuration whereconnecting rods are mounted next to each other on the same crankpin(journal). |
| INTERNAL COMBUSTION ENGINE PARTS |
SINGLE PIECE CONNECTING ROD |
has small end, rod or shank andbig end as one unit. This is used in most of the small two stroke enginesmeant for two wheelers. |
| INTERNAL COMBUSTION ENGINE PARTS |
SPRING (valve) |
A coiled wire that varies its length by flexing, and twisting. |
| INTERNAL COMBUSTION ENGINE PARTS |
SPRING FREE LENGTH |
The length of the spring when measured withoutany load on it. |
| INTERNAL COMBUSTION ENGINE PARTS |
SPRING MECHANICAL PRELOAD |
The length or pressure of a spring,measured while it is in the installed condition. |
| INTERNAL COMBUSTION ENGINE PARTS |
SPRING RATE |
The amount of force necessary to compress a spring aspecific distance, kilograms per centimeter, to indicate the stiffness orsoftness of a spring. |
| INTERNAL COMBUSTION ENGINE PARTS |
SPRING RETAINER |
In the valve train, the piece of metal that holdsthe springs in place and is itself locked in place by the valve springretainer locks. |
| INTERNAL COMBUSTION ENGINE PARTS |
SPRING RETAINER LOCK |
The locking device on the valve stem thatlocks the spring retainer in place. |
| INTERNAL COMBUSTION ENGINE PARTS |
SQUARE ENGINE |
An engine having the bore and stroke of equalmeasurements. |
| INTERNAL COMBUSTION ENGINE PARTS |
SQUISH |
The action (radial inward air motion) in some combustion chambersin which the last part of the compressed charge is pushed, or squirted, outof a decreasing space between the piston and the cylinder head. |
| INTERNAL COMBUSTION ENGINE PARTS |
STIRLING ENGINE |
Atypical internal combustion engine in which thepiston is moved by the changing pressure of a working gas that isalternately heated and cooled |
| INTERNAL COMBUSTION ENGINE PARTS |
STROKE |
In an engine, the distance that the piston moves from BDC toTDC or vice versa. |
| INTERNAL COMBUSTION ENGINE PARTS |
SUMP |
A system for storing lubricating oil, either in the crankcase (wetsump) or in a separate tank (dry sump). |
| INTERNAL COMBUSTION ENGINE PARTS |
SUPER CHARGER |
A device in the intake system of an engine whichpressurizes the ingoing charge. This increases the mass of charge (airfuel mixture) burned and thus increases engine output. If the superchargeris driven by the engine exhaust gas turbine, it is
calledTURBOCHARGER. |
| INTERNAL COMBUSTION ENGINE PARTS |
TANK UNIT |
The unit of the fuel indicating system that is mounted inthe fuel tank. |
| INTERNAL COMBUSTION ENGINE PARTS |
TAIL PIPE |
carries the exhaust gases from the muffler and exhausts thesame into the atmosphere. The tail pipe end is sometime cut on a bias(at an angle) to reduce exhaust noise. |
| INTERNAL COMBUSTION ENGINE PARTS |
THERMAL EFFICIENCY |
Relationship between the power output andthe energy in the fuel burned to produce the output. |
| INTERNAL COMBUSTION ENGINE PARTS |
THERMOSTAT |
A temperature sensitive device used in a cooling systemto adjust flow of coolant as coolant temperature changes. |
| INTERNAL COMBUSTION ENGINE PARTS |
THERMOSTATICALLY CONTROLLED AIR CLEANER |
An air cleaner which uses a thermostat to control the preheating of intake air. |
| INTERNAL COMBUSTION ENGINE PARTS |
THROW A ROD |
Expression used to designate an engine with a loose,knocking connecting rod bearing, or an engine that has broken aconnecting rod and showed it through the cylinder block or oil pan. |
| INTERNAL COMBUSTION ENGINE PARTS |
TIMING |
In the engine, refers to timing of valves, and timing of ignition,and their relation to piston position in the cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
TIMING CHAIN |
A chain driven by a sprocket on the crankshaft, thatdrives the sprocket on the camshaft. |
| INTERNAL COMBUSTION ENGINE PARTS |
TIMING GEARS |
are a pair of meshing gears (one bigger gear mountedon the camshaft and another smaller gear mounted on the crankshaft)meant for driving the camshaft at the required speed ratio by thecrankshaft. |
| INTERNAL COMBUSTION ENGINE PARTS |
TOP DEAD CENTRE (TDC) |
The piston position at which the pistonhas moved to the top of the cylinder and the centre line of theconnecting rod is parallel to the cylinder wall. |
| INTERNAL COMBUSTION ENGINE PARTS |
TORQUE |
The twisting force at the end of the crank shaft multiplied by the distance of this force application from the shaft centre, measuredin kilogram meters or Newton meters. |
| INTERNAL COMBUSTION ENGINE PARTS |
TORSIONAL VIBRATION |
Back and forth motion around a turningcentre. Vibration in a rotary direction that causes a twist-untwist actionon a rotating shaft, a rotating shaft that repeatedly moves ahead or lagsbehind the remainder of the shaft; for example, the actions
of acrankshaft responds to the cylinder firing impulses. |
| INTERNAL COMBUSTION ENGINE PARTS |
TUNED INTAKE SYSTEM |
An intake system in which the manifold has theproper length and volume to introduce a ramjet or supercharging effect. |
| INTERNAL COMBUSTION ENGINE PARTS |
TUNE UP |
The procedure of inspection, testing and adjusting an engine andreplacing any worn parts to restore the engine to its best performance. |
| INTERNAL COMBUSTION ENGINE PARTS |
TURBOCHARGER |
A supercharger driven by the gas turbine which isoperated by the engine exhaust gases. |
| INTERNAL COMBUSTION ENGINE PARTS |
TWO STROKE CYCLE |
The series of events namely intake, compression,power and exhaust all of which take place in two piston strokes. Alsocalled TWO CYCLE in a short form. |
| INTERNAL COMBUSTION ENGINE PARTS |
V ENGINE |
An engine with two banks of cylinders set at an angle to eachother to form a V. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE |
A device that can be opened or closed to allow or stop the flow of a fluid (liquid or gas or vapour) from one to another place. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE CLEARANCE |
The clearance between the rocker arm and the valvestem tip in an overhead valve engine: The clearance in the valve train when the valve, is in the closed position. Also called VALVE LASH. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE FLOAT |
The condition that exists when an engine valve does notfollow the cam profile, failure of the valve to close at the proper time. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE GRINDING |
Refacing a valve in a valve facing machine. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE GUIDE |
The cylindrical part in the cylinder block or head in whichthe valve is assembled and in which valve stem moves up and down. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE LIFTER |
Also called lifter, tappet, valve tappet and cam follower. A cylindrical part of the engine, which rests on a cam of the camshaftand is lifted, by cam action, so that the valve is opened. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE LIFTER FOOT |
The bottom end of the valve lifter, the part thatrides on the cam lobe. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE OVERLAP |
Number of degrees of crankshaft rotation through which both the intake and exhaust valves are open together. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE ROTATOR |
Device used in place of the valve spring retainer, it hasa built in mechanism to rotate the valve slightly each time it opens. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE SEAT |
The surface in the cylinder head or cylinder block against which the valve face comes to rest. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE SEAT INSERT |
Metal rings inserted in the valve seats, usually exhaust, they are of special metal which can withstand high temperatureand exhibit minimum wear at these temperatures. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE SEAT RECESSION |
Also known as lash loss, the tendency forthe valves, in some engines run on unleaded gasoline, to contact theseat in such a way that the seat wears away, or recesses into the cylinderhead. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE STEM |
The long, thin cylindrical section of the valve that fits andmoves in the valve guide. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE TIMING |
The timing of valve opening and closing in relation topiston position in the cylinder. |
| INTERNAL COMBUSTION ENGINE PARTS |
VALVE TRAIN |
The valve operating mechanism of an engine, from thecamshaft of the valve. |
| INTERNAL COMBUSTION ENGINE PARTS |
VEE CYLINDERS |
Cylinders positioned at angles to each other formingthe shape of the letter V. |
| INTERNAL COMBUSTION ENGINE PARTS |
VIBRATION DAMPER |
is attached to the crankshaft in order to controlthe torsional vibration caused by the power impulses. |
| INTERNAL COMBUSTION ENGINE PARTS |
VOLUMETRIC EFFICIENCY |
Ratio between the amount of fresh chargethat actually enters an engine cylinder and the theoretical amountthat could enter under ideal conditions. |
| INTERNAL COMBUSTION ENGINE PARTS |
WANKEL ENGINE |
A rotary type engine, in which a three lobe rotorturns eccentrically in a specially shaped housing. |
| INTERNAL COMBUSTION ENGINE PARTS |
WET LINER |
When fitted in the cylinder block has water on the externalsurface of the liner. Good cooling is realized by having the water indirect contact with the liner. |
| INTERNAL COMBUSTION ENGINE PARTS |
WRIST PIN |
A cylindrical (solid or hollow) pin that attaches the piston tothe connecting rod at the centre of the engine intake manifold. Single point injection (SPI)is also called throttle body injection (TBI). |
| SPARK IGNITION ENGINES |
ACCELERATOR |
Device for rapid control of speed, for quick openingand closing of the throttle. It is a foot or hand operated, spring returned,linked to the throttle valve in the carburettor. The minimum throttleopening is controlled by the setting of the throttle
screw. |
| SPARK IGNITION ENGINES |
ACCELERATOR PUMP |
In the carburettor, a small pump linked tothe accelerator which momentarily injects a charge of fuel into theintake tract in addition to that supplied by the normal meteringcomponents, and thus enriches the mixture when the acceleratorpedal is
depressed. |
| SPARK IGNITION ENGINES |
ADVANCE |
Setting the ignition timing so that spark occurs before thepiston reaches top dead center. |
| SPARK IGNITION ENGINES |
AIR BLEED |
An opening into a gasoline passage through which air canpass or bleed into the gasoline as it moves through the passage, to weaken the air fuel mixture. |
| SPARK IGNITION ENGINES |
AIR FUEL MIXTURE |
Finely atomized mist of fuel and air necessary forcombustion. This mixture consists of approximately 15 parts air toone part fuel (15 : 1) at cruising speed. |
| SPARK IGNITION ENGINES |
AIR FUEL RATIO |
The proportion of air to fuel in the working charge of an internal combustion engine, or in other combustible mixtures,expressed by weight for liquid fuels and by volume for gaseous fuels. |
| SPARK IGNITION ENGINES |
AIRGAP (spark plug) |
Distance between centre and side electrodes, in aspark plug. Spark jumps across this gap. |
| SPARK IGNITION ENGINES |
AIR HORN |
In the carburettor, the tubular passage through which theincoming air must pass. |
| SPARK IGNITION ENGINES |
AIR JET |
A small jet in the air passage of a carburettor. This jet meters theamount of air fed to the diffuser in an air bleed type carburettor. |
| SPARK IGNITION ENGINES |
ANTIKNOCK SUBSTANCES |
Substances added to petrol to lessen itstendency to detonate, or knock in an engine, i.e., Tetra ethyl lead. |
| SPARK IGNITION ENGINES |
ANTIKNOCK VALUE |
The relative immunity of a volatile liquid fuelfrom detonation, or knocking, in a petrol engine, as compared withsome standard fuel. |
| SPARK IGNITION ENGINES |
ANTIPERCOLATOR |
Device for venting vapours from main dischargetube or well of a carburettor. |
| SPARK IGNITION ENGINES |
ANTI SIPHON SYSTEM |
Use of a small passage designed into a carburettorto prevent fuel from siphoning from the float bowl into the engine. |
| SPARK IGNITION ENGINES |
ATOMIZED |
Tiny particles of fuel mixed with air, making a fine mist. |
| SPARK IGNITION ENGINES |
AUTOMATIC CHOKE |
A carburettor choke device (valve) thatautomatically positions itself in accordance with carburettor needs orengine temperature. |
| SPARK IGNITION ENGINES |
AUTOVAC |
A vacuum operated mechanism for raising fuel from a tank situated below the level of the carbutettor to a position from which itmay be fed to the latter by gravity. |
| SPARK IGNITION ENGINES |
BACKFIRE |
(1) Premature ignition during starting of an internalcombustion engine, resulting in an explosion before the end of compression stroke, and consequent reversal in the direction of rotation. (2) An explosion of live gases accumulated in the exhaustsystem
due to incomplete combustion in the cylinder. |
| SPARK IGNITION ENGINES |
BACKFIRE (intake system) |
Preexplosion of air fuel mixture so that theexplosion passes the open intake valve and flashes back through theintake manifold. May be caused by faulty timing, crossed plug wires,leaky intake valve etc. |
| SPARK IGNITION ENGINES |
BACK KICK |
Violent reversal of an internal combustion engine crankshaftrotation, during starting due to backfire. |
| SPARK IGNITION ENGINES |
BALANCED CARBURETTOR |
Carburettor in which the float bowl isvented into the air horn, below the air cleaner, to compensate for theeffects of a clogged air filter. |
| SPARK IGNITION ENGINES |
BATTERY COIL IGNITION |
High tension supply for sparking plugs, inautomobiles, in which the interruption of a primary current from a battery induces a high secondary emf in another winding on the samemagnetic circuit, the high potential being distributed in synchronism
with the contact breaker in the primary circuit and the engine firingorder. |
| SPARK IGNITION ENGINES |
BERNOULLIS PRINCIPLE |
Given a fluid flowing through a tube, any constriction or narrowing of the tube will create an increase in thefluid velocity and a decrease in pressure. This principle is used in theventuri tube of the carburettor. |
| SPARK IGNITION ENGINES |
BOOST VENTURI |
also called secondary venturi is a smaller venturi orrestriction, incorporated in some carburettors in the middle of the primary venturi. It increases air speed, vacuum created and hence fuel flow. |
| SPARK IGNITION ENGINES |
BOWL VENT |
is an opening in the carburettor float chamber. This holeprevents pressure or vacuum from building up in the bowl. |
| SPARK IGNITION ENGINES |
BREAKER ARM |
The movable arm upon which one of the breaker pointsof the ignition system is affixed. |
| SPARK IGNITION ENGINES |
BREAKER POINTS (ignition) |
Pair of points, one fixed and anothermovable, that are opened and closed to break and make the primary circuit. When the circuit is broken by opening the points, the spark plug fires. |
| SPARK IGNITION ENGINES |
BUTTERFLY VALVE |
A type of valve used for choke and throttle valve ina carburettor that is so named due to its resemblance to the insect of same name. This valve controls charge flow. |
| SPARK IGNITION ENGINES |
CAM ANGLE (ignition) |
Number of degrees breaker cam rotates fromthe time breaker points close until they open again. Also called DWELL ANGLE. |
| SPARK IGNITION ENGINES |
CAPACITOR DISCHARGE IGNITION (CDI) |
An electronic ignitionsystem designed to produce very high voltage, consisting of an excitercoil, a capacitor, diode, trigger coil, silicon controlled rectifier and acignition coil. |
| SPARK IGNITION ENGINES |
CARBURETION |
The actions that take place in the carburettor, convertingliquid fuel to vapour and mixing it with air to form a combustiblemixture. |
| SPARK IGNITION ENGINES |
CARBURETTOR |
The mixing device in the fuel system which meters andmixes gasoline into the air stream (vaporizing gasoline as it does so) invarying proportions to suit engine operating conditions. |
| SPARK IGNITION ENGINES |
CARBURETTOR ADAPTER |
Adapter used to fit or place one type of carburettor on an intake manifold that may not be originally designedfor it. |
| SPARK IGNITION ENGINES |
CARBURETTOR CIRCUITS |
Series of passages and units designed toperform a specific functions—idle circuit, full power circuit etc. |
| SPARK IGNITION ENGINES |
CARBURETTOR ICING |
Formation of ice on throttle plate or valve. Asfuel nozzles feed fuel into air horn it turns to a vapour. This robs heatfrom air. When weather conditions are just right (fairly cold and quitehumid) ice may form. |
| SPARK IGNITION ENGINES |
CARBURETTOR INSULATOR |
A spacer, or insulator, used to preventexcess engine heat from reaching the carburettor. |
| SPARK IGNITION ENGINES |
CENTRIFUGAL ADVANCE (distributor) |
Unit designed to advance andretard ignition timing through action of centrifugal force resulting fromchanges in engine speed. |
| SPARK IGNITION ENGINES |
CHOKE |
Near the top of the carburettor, a butterfly valve that is closed when starting a cold engine. It chokes off the air flow through the airhorn, producing a partial vacuum in the air horn for greater fuel delivery and a richer mixture supply to
the engine. |
| SPARK IGNITION ENGINES |
CHOKE STOVE |
Heating compartment in or on the exhaust manifoldfrom which hot air is drawn to the automatic choke device. |
| SPARK IGNITION ENGINES |
COIL (ignition) |
Unit used to step up the relatively low voltage suppliedby the battery to the extent necessary to create a spark across the spark plug terminals. |
| SPARK IGNITION ENGINES |
COIL BUILDUP |
Build up of a magnetic field while current is flowingthrough primary windings of the coil. |
| SPARK IGNITION ENGINES |
COLD PLUG |
has a shorter heat path. Hence it runs at a much lowertemperature than a hot plug. |
| SPARK IGNITION ENGINES |
COMBUSTION LAG TIME |
A period of slow burning that occurs beforethe burning of the air fuel mixture, which spreads throughout the enginecombustion chamber. |
| SPARK IGNITION ENGINES |
CONDENSER (ignition) |
Unit installed between breaker points and coilto prevent arcing at breaker points. Condenser absorbs and retainsmomentary surge of current when the breaker points open. |
| SPARK IGNITION ENGINES |
CONSTANT CHOKE CARBURETTOR |
is the carburettor in whichthe air and fuel flow passages (i.e. , areas) are always maintained to beconstant. But the pressure difference or depression which causes theflow of fuel is being varied as per the demand on the engine. |
| SPARK IGNITION ENGINES |
CONSTANT VACUUM CARBURETTOR |
is the carburettor in whichthe air and fuel flow areas are being varied as per the demand on theengine, while the depression or vacuum is maintained to be always same. |
| SPARK IGNITION ENGINES |
CONTACT POINTS |
In the conventional ignition system, the stationary and the movable points in the primary circuit, usually made of tungsten, platinum or silver. Also called BREAKER POINTS. |
| SPARK IGNITION ENGINES |
CONVENTIONAL IGNITION |
Ignition system which uses breaker points. |
| SPARK IGNITION ENGINES |
CRITICAL COMPRESSION RATIO |
The lowest compression ratio at which any particular fuel air mixture will ignite by compression underprescribed test procedure. The lower the critical compression ratio,the better ignition qualities the fuel has (Gasoline engine 4 :1, oil engine7
:1 diesel engine 12.5 :1). |
| SPARK IGNITION ENGINES |
DASHPOT (carburettor) |
A device in the carburettor that preventsexcessively sudden closing of the throttle. |
| SPARK IGNITION ENGINES |
DETONATION |
A violent, instantaneous explosion of the final portionof the burning combustion gases caused by an excessive rise of pressureand temperature, also called AUTO IGNITION. |
| SPARK IGNITION ENGINES |
DIESELING |
A condition in which a spark ignition engine continues torun after the ignition is shut off. Also called RUNNING ON. |
| SPARK IGNITION ENGINES |
DISTRIBUTOR (ignition) |
Unit designed to make and break the ignitionprimary circuit and to distribute resultant high voltage to the proper spark plug in the cylinder at the correct time. Rarely used in motor cycles. |
| SPARK IGNITION ENGINES |
DISTRIBUTOR CAP (ignition) |
Insulated cap containing a central terminal with series (one per cylinder) of terminals that are evenly spaced incircular pattern around the central terminal. Secondary high voltagetravels to central terminal where it is then channeled to one
of the outerterminals by the rotor. |
| SPARK IGNITION ENGINES |
DOWN DRAFT CARBURETTOR |
Carburettor air horn is so arrangedthat the air passes downward through the carburettor on its way intothe intake manifold. |
| SPARK IGNITION ENGINES |
DUAL BREAKER POINTS (ignition) |
Distributor using two sets of breakerpoints to increase cam angle so that even at high speeds, spark withsufficient intensity will be produced. |
| SPARK IGNITION ENGINES |
DUAL CARBURETTOR |
An engine on which two carburettors have beenmounted. |
| SPARK IGNITION ENGINES |
DWELL ANGLE |
The number of degrees on the breaker cam during whichthe breaker points are kept closed. |
| SPARK IGNITION ENGINES |
DWELL METER |
A device used to measure the number of degrees thatthe ignition contact points remain closed. |
| SPARK IGNITION ENGINES |
DYNAMIC TIMING |
A test of ignition timing made with the strobelight. |
| SPARK IGNITION ENGINES |
ECONOMIZER VALVE |
Fuel flow control device within the carburettor. |
| SPARK IGNITION ENGINES |
ELECTRIC ASSIST CHOKE |
A choke which uses a small electric heatingelement to warm the choke spring, causing it to release more quickly.This reduces exhaust emissions during the start up of a cold engine. |
| SPARK IGNITION ENGINES |
ELECTRODE (spark plug) |
Centre electrode rod passing through theinsulator forms one electrode. The rod welded to the shell formsanother. They are referred as centre and side electrodes. |
| SPARK IGNITION ENGINES |
ELECTRONIC FUEL INJECTION |
A fuel injection system used forinjecting gasoline into the spark ignition engines, which has anelectronic control system to time and meter the fuel injected. |
| SPARK IGNITION ENGINES |
ELECTRONIC IGNITION SYSTEM |
An ignition system usingtransistors, which does not have mechanical contact breaker points inthe distributor, but uses the distributor for distributing the secondary voltage to the spark plugs. |
| SPARK IGNITION ENGINES |
ERODED PISTON (crown) |
A condition caused by detonation orpreignition where the gas temperatures are raised so high that part of piston crown is heated and melted away. |
| SPARK IGNITION ENGINES |
ESC |
Electronic spark control. |
| SPARK IGNITION ENGINES |
ENERGY TRANSFER MAGNETO |
A self powered ignition system thatconsists of a flywheel with permanent magnets that rotate around alaminated core with coil windings, an induction coil, contact pointsand capacitor. |
| SPARK IGNITION ENGINES |
FLAME FRONT |
The glowing layer of flame that separates the burnedcharge from the unburned charge in a SI engine during combustionprocess. The flame front should move in a controlled pattern acrossthe cylinder. |
| SPARK IGNITION ENGINES |
FLAME VELOCITY |
is the speed with which the flame front travels insidethe combustion chamber. This affects combustion phenomena,development of pressure and production of power. |
| SPARK IGNITION ENGINES |
FLASH OVER |
A condition that occurs when a spark jumps across thesurface of a spark plug insulator from the terminal. |
| SPARK IGNITION ENGINES |
FLAT SPOT |
A point during acceleration when the engine seems to loosepower for an instant. |
| SPARK IGNITION ENGINES |
FLOAT BOWL |
In the carburettor, the reservoir from which gasoline feedsinto the passing air. Also called FLOAT CHAMBER. |
| SPARK IGNITION ENGINES |
FLOAT LEVEL |
The float position at which the needle valve closes fuelinlet to the carburettor to prevent further delivery of fuel. |
| SPARK IGNITION ENGINES |
FLOAT SYSTEM |
The system in the carburettor that controls the entry of fuel and fuel level in the float bowl. |
| SPARK IGNITION ENGINES |
FLOODED |
A term used to indicate that the engine cylinders received anair fuel mixture too rich to burn. |
| SPARK IGNITION ENGINES |
FOUR BARREL CARBURETTOR |
A carburettor with four throttle valves.In effect two, two barrel carburettors in a single assembly. |
| SPARK IGNITION ENGINES |
FUEL FILTER |
A screen used to prevent contaminants in the fuel fromentering the carburettor or fuel pump. |
| SPARK IGNITION ENGINES |
FUEL LINE |
The pipe or tube through which fuel travels from the tank tothe fuel pump and from the pump to the carburettor. |
| SPARK IGNITION ENGINES |
FUEL NOZZLE |
The tube in the carburettor through which gasoline feedsfrom the float bowl into the passing air. In a fuel injection system, thetube that delivers the fuel into the compressed air or passing air stream. |
| SPARK IGNITION ENGINES |
FUEL PUMP |
The electrical or mechanical device in the fuel system whichtransfers fuel from the fuel tank to the carburettor. |
| SPARK IGNITION ENGINES |
FUEL SCREW |
A fine point screw that projects into the slow jet outletpassage, used to adjust the fuel mixture at slow speeds, located at theengine side of the carburettor. |
| SPARK IGNITION ENGINES |
FUEL SYSTEM |
In an automobile, the system that delivers to the enginecylinders, the combustible mixture of vaporized fuel and air. It consistsof fuel tank, lines, gauge, carburettor, fuel pump and intake manifold. |
| SPARK IGNITION ENGINES |
FULL ADVANCE |
The point at which the advance unit will no longercontinue advancing ignition timing. |
| SPARK IGNITION ENGINES |
FULL THROTTLE |
A wide open throttle position with the acceleratorpressed all the way down to the floor board. |
| SPARK IGNITION ENGINES |
HEAT RANGE |
A term used to describe the ability of a spark plug to carry away heat. Plugs with longer nosed insulators take longer path andtime to carry heat off effectively. |
| SPARK IGNITION ENGINES |
HEMISPHERICAL COMBUSTION CHAMBER |
A combustionchamber shaped like a round dome, allowing use of large valves placedopposite each other in the chamber. |
| SPARK IGNITION ENGINES |
HIGH SPEED CIRCUIT |
The circuit in the carburettor that supplies fuelinto the air passing through the air horn during, medium and highspeed, part to full throttle operation. |
| SPARK IGNITION ENGINES |
HIGHEST USEFUL COMPRESSION RATIO |
is the compression ratioat which a fuel test engine can be operated without detonation with any mixture strength or with any ignition timing, at a speed of 1500 rpm. |
| SPARK IGNITION ENGINES |
HOLED PISTON |
A condition caused by severe detonation or preignition, where a hole is eaten or burned through the piston crown, as a resultof extreme heat and pressure. |
| SPARK IGNITION ENGINES |
HOT PLUG |
has a longer heat path, hence it runs at a much highertemperature than a cold plug. |
| SPARK IGNITION ENGINES |
IDLE MIXTURE |
The air fuel mixture supplied to an engine during idle.The mixture is usually rich. The idle mixture screw(s) are sometimesadjusted as a part of tune up. |
| SPARK IGNITION ENGINES |
IDLE MIXTURE ADJUSTMENT SCREW |
The adjustment screw insome carburettors, that can be turned in or out to vary the quality of the idle mixture. |
| SPARK IGNITION ENGINES |
IDLE SYSTEM |
In the carburettor, the passages through which fuel is fed when the engine is idling. |
| SPARK IGNITION ENGINES |
IGNITION (spark) |
In an engine, the act of spark in starting the combustionprocess in the cylinder. |
| SPARK IGNITION ENGINES |
IGNITION ADVANCE |
To set the ignition timing, so that a spark occursearlier or more degrees before TDC. |
| SPARK IGNITION ENGINES |
IGNITION COIL |
That part of the ignition system which acts as atransformer to step up the battery voltage to many thousand volts, thehigh voltage surge then produces a spark at the spark plug gap. |
| SPARK IGNITION ENGINES |
IGNITION DISTRIBUTOR |
That part of the ignition system, whichopens and closes the circuit to the ignition coil with correct timingand distributes to the proper spark plugs the resulting high voltagesurges from the ignition coil. |
| SPARK IGNITION ENGINES |
IGNITION SWITCH |
The switch in the ignition system which is operated with a key to open and close the ignition primary circuit. |
| SPARK IGNITION ENGINES |
IGNITION SYSTEM |
The part of the electrical system that provides highvoltage sparks to the engine cylinder to fire the compressed air fuelmixture, consisting of a voltage source, timing device, capacitor, ignitioncoil, secondary wiring and spark plugs. |
| SPARK IGNITION ENGINES |
IGNITION TIMING |
is the crank angle at which spark occurs relative tothe top dead center, during compression stroke. |
| SPARK IGNITION ENGINES |
INTAKE MANIFOLD (SI engine) |
The part of the engine that providesa series of passages from the carburettor to the engine cylinders through which air fuel mixture can flow. |
| SPARK IGNITION ENGINES |
INTAKE STROKE |
The piston movement from TDC to BDC that occursas the intake valve opens. This movement causes entry of fresh charge. |
| SPARK IGNITION ENGINES |
JET |
A calibrated passage in the carburettor through which fuel flows. |
| SPARK IGNITION ENGINES |
KNOCKING COMBUSTION |
is the autoignition or instantaneousignition of the end charge due to the compression of the same by theexpansion and radiation heat of the burning charge. |
| SPARK IGNITION ENGINES |
LEAN MIXTURE |
An air fuel mixture that has a relatively high proportionof air and a low proportion of fuel. |
| SPARK IGNITION ENGINES |
LOW SPEED CIRCUIT |
The circuit in the carburettor that supplies fuelto the air passing through the air horn during low speed, part throttleoperation. |
| SPARK IGNITION ENGINES |
MAIN FUEL NOZZLE |
The fuel nozzle in the carburettor venturi thatsupplies fuel when the throttle is opened partially to fully openedposition. |
| SPARK IGNITION ENGINES |
MANIFOLD VACUUM |
The vacuum in the intake manifold that developsas a result of the vacuum in the cylinders on their intake strokes. |
| SPARK IGNITION ENGINES |
METERING ROD AND JET |
A device, consisting of a small movablerod, which has a varied diameter, and a jet (which accommodates themovable rod) that increases or decreases fuel passage and hence the flow of fuel according to engine throttle opening, engine load or acombination
of both. |
| SPARK IGNITION ENGINES |
MISSING |
In the engine, the failure of the air fuel mixture in a cylinder toignite when it should and thus causing the engine to run roughly. |
| SPARK IGNITION ENGINES |
MULTIPOINT FUEL INJECTION (MPFI) |
has one injector for eachcylinder. Fuel is injected in more than one location. This is often calledport injection. |
| SPARK IGNITION ENGINES |
NORMAL COMBUSTION |
refers to the combustion of the entire airfuel mixture in the SI engine combustion chamber, layer by layer by the moving flame. |
| SPARK IGNITION ENGINES |
OCTANE NUMBER OF A FUEL |
is the percentage by volume of iso-octane in a mixture of iso-octane and n-heptane which will exhibit thesame antiknock characteristic of the fuel under test, when tested in astandard (CFR) engine, under a set of standard test conditions. |
| SPARK IGNITION ENGINES |
OCTANE RATING |
The number indicating the quality of gasoline basedon its ability to resist knock. The higher the number, the better thequality. Higher compression engines require higher octane fuel. |
| SPARK IGNITION ENGINES |
OPTIMUM SPARK TIMING |
is the ignition timing which will causethat half of the pressure rise occurs at dead center. This happens inpractice when 75 per cent of the charge burns after ignition. |
| SPARK IGNITION ENGINES |
PERCOLATION |
A condition in which the fuel actually “boils” due toexcess heat. Percolation prevents proper atomization of the fuel causingrough running. |
| SPARK IGNITION ENGINES |
PERFORMANCE NUMBER |
is the ratio of knock limited imep with thefuel in question to the knock limited imep with iso-octane when theinlet pressure is used as the dependent variable. |
| SPARK IGNITION ENGINES |
PING |
A metallic ratling sound produced by the engine under acceleration.It is usually due to incorrect ignition timing or poor grade of gasoline. |
| SPARK IGNITION ENGINES |
POST COMBUSTION ACTIVITY |
The last phase of combustion, during which the piston descends, the volume inside the cylinder increases,and the cylinder eliminates spent gases. |
| SPARK IGNITION ENGINES |
POWER PISTON |
In some carburettors, a vacuum operated piston thatallows additional fuel to flow at wide open throttle to permit delivery of a richer air fuel mixture to the engine |
| SPARK IGNITION ENGINES |
PREIGNITION |
Abnormal combustion that occurs when the air fuel mixtureignites before the spark plug fires and this is due to some hot spot. |
| SPARK IGNITION ENGINES |
PRIMARY IGNITION CIRCUIT |
Section of the ignition circuit includingcontact points, condenser and primary winding of ignition coil, powersupply (battery or ignition generating coil), ignition switch and related wiring. |
| SPARK IGNITION ENGINES |
PRIMARY WINDING |
Part of an ignition coil, a separate winding of heavy wire wound a few hundred turns around a laminated steel core. |
| SPARK IGNITION ENGINES |
QUENCH |
The space in some combustion chambers which absorbs enoughheat to quench or extinguish the combustion flame front as it approachesa relatively cold cylinder wall. This prevents detonation of the end gasbut results in hydrocarbon emission. |
| SPARK IGNITION ENGINES |
REED VALVE |
A type of valve used in the crankcase of some two cycleengines. Air fuel mixture enters the crankcase through the reed valve, which then closes as pressure builds up in the crankcase. |
| SPARK IGNITION ENGINES |
RESISTOR SPARK PLUG |
A spark plug incorporating a resistor to shortenthe spark duration. This suppresses radio interference and lengthens pluglife. |
| SPARK IGNITION ENGINES |
RICH MIXTURE |
An air fuel mixture with high proportion of fuel. |
| SPARK IGNITION ENGINES |
RISE TIME |
The length of time between the begining of the voltage at theplug and the begining of the spark. |
| SPARK IGNITION ENGINES |
RUN ON |
Condition when a SI engine continues to run, even when theignition key is turned off. Also called DIESELING. |
| SPARK IGNITION ENGINES |
SECONDARY IGNITION CIRCUIT |
Part of the ignition circuitconsisting of secondary windings of ignition coil, spark plug wire, spark plug terminal and spark plug. |
| SPARK IGNITION ENGINES |
SECONDARY WINDING |
Part of an ignition coil, a winding of fine wire wound many thousands of turns around a laminated steel core. |
| SPARK IGNITION ENGINES |
SIDE DRAUGHT CARBURETTOR |
also called horizontal carburettor,consists of a horizontal mixing tube, with the float chamber on the sideof it. |
| SPARK IGNITION ENGINES |
SINGLE POINT INJECTION |
has one or two injectors mounted insidethe throttle body assembly. Fuel is sprayed into one point or location |
| SPARK IGNITION ENGINES |
SPARK ADVANCE |
The adjustment in ignition timing made by the timingdevice for changes in load, speed or other conditions. |
| SPARK IGNITION ENGINES |
SPARK DURATION |
The length of time spark occurs at a spark plug. |
| SPARK IGNITION ENGINES |
SPARK PLUG |
The assembly, which includes a pair of electrodes and aninsulator, that has the purpose of providing a spark gap in the enginecylinder. |
| SPARK IGNITION ENGINES |
SPARK PLUG HEAT RANGE |
The distance heat must travel from thecentre electrode to reach the outer shell of the plug and enter thecylinder head. |
| SPARK IGNITION ENGINES |
SPARK PLUG REACH |
is the length of the threaded portion of the spark plug. This is the distance between the end of the plug threads and theseat or sealing surface of the plug. |
| SPARK IGNITION ENGINES |
SQUISH |
is the radial inward or transverse gas motion that occurs towardsthe end of the compression stroke, when a portion of the piston headapproaches the cylinder head closely. |
| SPARK IGNITION ENGINES |
STATIC TIMING |
The test of ignition timing made with a buzzbox or acontinuity light while the engine is at rest. |
| SPARK IGNITION ENGINES |
STRATIFIED CHARGE ENGINE |
In a gasoline fuel, spark ignitionengine, a type of combustion chamber in which the flame starts in avery rich pocket or layer of fuel air mixture and after ignition, spreadsto the leaner mixture filling the rest of the combustion chamber. Thediesel
engine is a stratified charge engine. |
| SPARK IGNITION ENGINES |
SURFACE IGNITION |
is the ignition of the air fuel mixture by any hotspot in the combustion chamber. |
| SPARK IGNITION ENGINES |
S/V RATIO |
The ratio of surface area of the combustion chamber to itsvolume, with the piston at the top dead centre. Often used as a comparativeindicator of hydrocarbon (HC) emission levels from an engine. |
| SPARK IGNITION ENGINES |
THROTTLE (valve) |
Around disc valve in the throttle body of thecarburettor that can be turned by the driver to admit more or less airfuel mixture, thereby control the engine speed. |
| SPARK IGNITION ENGINES |
THROTTLE CRACKER |
Linkage from the starting motor switch to thethrottle, which opens the throttle slightly when the engine is being cranked. |
| SPARK IGNITION ENGINES |
THROTTLE RETURN CHECK |
A device in the carburettor whichprevents excessively sudden closing of the throttle, also called dashpot. |
| SPARK IGNITION ENGINES |
TIMING LIGHT |
A light that is connected to the ignition system to flasheach time the number one spark plug fires, used for adjusting the timingof the ignition spark. |
| SPARK IGNITION ENGINES |
TIMING UNIT |
A device that determines, when the ignition system firesthe spark plugs. |
| SPARK IGNITION ENGINES |
TRANSISTOR ASSISTED CONTACT IGNITION (TAC) |
An ignitionsystem similar to battery point ignition but which uses a transistor toeliminate heavy current flow at the contact points. |
| SPARK IGNITION ENGINES |
TRANSISTOR POINTLESS IGNITION |
A battery assisted ignition systemusing a pulse generator to trigger a transistor to fire the spark plug. |
| SPARK IGNITION ENGINES |
TURBULENCE |
The state of being violently disturbed. In the engine, therapid swirling motion imparted to the air fuel mixture entering thecylinder. |
| SPARK IGNITION ENGINES |
TURNS RATIO |
The ratio of the number of coils in the primary andsecondary windings of an ignition coil. |
| SPARK IGNITION ENGINES |
TWO BARREL CARBURETTOR |
A dual carburettor in which there aretwo throttle valves. |
| SPARK IGNITION ENGINES |
UNIT DISTRIBUTOR |
An ignition distributor, used by General Motors,that uses a magnetic pick up coil, and timer core instead of points andcondenser. It has the ignition coil assembled in the distributor as a unit. |
| SPARK IGNITION ENGINES |
UPDRAFT CARBURETTOR |
is the carburettor in which the air fuelmixture flows upward. This unit can be placed on the side of theengine. |
| SPARK IGNITION ENGINES |
VACUUM ADVANCE |
A method of advancing the ignition timing by applying engine vacuum to a diaphragm mounted on the distributor. |
| SPARK IGNITION ENGINES |
VACUUM GAUGE |
In automotive engine service, a device that measuresintake manifold vacuum and thereby indicates action of enginecomponents. |
| SPARK IGNITION ENGINES |
VAPOUR LOCK |
A condition in the fuel system in which gasoline hasvapourized and turned to bubbles in the fuel line, or fuel pump so thatfuel delivery to the carburettor is prevented or retarded. |
| SPARK IGNITION ENGINES |
VAPOURIZATION |
is the process of changing the liquid or atomized fuelinto a vapour. |
| SPARK IGNITION ENGINES |
VENTURI |
In the carburettor, the restriction in the air horn that producesthe vacuum responsible for the movement of gasoline into the passingair. |
| SPARK IGNITION ENGINES |
VENTURI PRINCIPLE |
The physical law which states that air movedthrough a constriction increases in speed and decreases in pressure atthe point of constriction. |
| SPARK IGNITION ENGINES |
WEDGE COMBUSTION CHAMBER |
A combustion chamberresembling in shape, a wedge. |
|
PENETRATION |
The distance through which fuel particles are carried by the kinetic energy imparted to them when they leave the fuel nozzle. |
|
PHYSICAL DELAY PERIOD |
The time that elapses between the beginingof fuel injection and the begining of preflame reactions. |
|
PILOT INJECTION |
is the early injection of a small quantity of fuel toinitiate combustion of the injected main fuel, in a diesel engine. |
|
PINTLE TYPE NOZZLE |
A closed type fuel nozzle having a projectionon the end of the fuel valve which extends into the orifice when thevalve is closed. |
|
PRECOMBUSTION CHAMBER |
Part of the combustion space locatedin the cylinder head, into which fuel is injected, and combustion startshere and spreads into the main chamber via the interconnecting orifices. |
|
QUALITY GOVERNING |
Power developed is governed by varying thequantity of fuel injected while the quantity of air sucked in is almostthe same. The air fuel ratio in the combustion chamber is different atdifferent loads. |
|
RATE OF FUEL INJECTION |
Amount of fuel that is injected into thecombustion chamber in unit time or in one degree of crank travel. |
|
REENTRANT COMBUSTION CHAMBER |
is an open combustionchamber which has a smaller diameter (opening) at the entry than atthe middle. |
|
RESIDUAL PRESSURE |
The pressure at which the fuel is retained in thefuel line when the injector needle valve and the pump delivery valve arein the closed position. |
|
SAC VOLUME |
is the dead volume between the nozzle seat and the end of the spray holes, in a multi hole injector. |
|
SEMI DIESEL |
A diesel which utilizes injection of fuel, but also uses electricspark ignition. |
|
SMOKE |
is nothing but the carbon particles suspended in the exhaust gases.It may be blue smoke, black smoke and white smoke. |
|
SODIUM COOLED VALVE |
A valve designed to allow the stem and head tobe made hollow and partially filled with metallic sodium for better cooling. |
|
SOLID INJECTION SYSTEM |
The system which injects only the meteredquantity of fuel by means of a pumping device. Also called AIRLESSINJECTION SYSTEM. |
|
SQUISH |
Radial inward flow of air from the annular space above the piston;into the combustion chamber cavity during the compression stroke of the piston. |
|
SQUISH AREA |
The area confined to the cylinder head and flat surface of the piston when on compression stroke, which causes squish. |
|
SQUISH HEIGHT |
refers to the clearance between the piston top andcylinder head, at TDC. This is reduced to a minimum consistent withmanufacturing capabilities and operational aspects. |
|
SUCTION SWIRL |
Rotary motion imparted to the air during suction by admitting air into the engine cylinder in a tangential direction. |
|
SUPER CHARGING |
Process of admitting into the engine cylinder, acharge larger in quantity (i.e., weight) than what the cylinder would contain due to regular suction stroke i.e., by natural aspiration. |
|
SURFACE FILTER |
Fuel filter similar to a sieve, consists of a number of discrete holes and pores, through a single layer of material. |
|
SWIRL |
Rotation of mass of air as it enters the engine cylinder. This is oneform of turbulence. |
|
SWIRL COMBUSTION CHAMBER |
Part of the combustion space,spherical or cylindrical in shape, located in the cylinder head, in whichvigorous swirl is created and into which fuel is injected and combustionstarts and spreads into the space above the piston. |
|
SWIRL RATIO |
is the ratio of (air) swirl speed in the combustion chamberto engine speed. |
|
TIMING MARK (injection) |
The mark made on the vibration damper orflywheel, used to check injection timing. |
|
TURBULENCE |
Violent swirling motion. Fuel injection produces someturbulence. Additional turbulence is provided by the design featuresof the combustion chamber. |
|
TURBULENCE CHAMBER |
A combustion chamber connected to thecylinder through a throat. Fuel is injected across the chamber andturbulence is produced in the chamber by the air entering duringcompression. |
|
TWO STAGE COMBUSTION |
Combustion occurring in two distinctsteps such as in a precombustion chamber. |
|
UNCONTROLLED COMBUSTION |
is the instantaneous combustionof the fuel that got accumulated in the combustion chamber, at theend of the delay period. |
|
UNIT INJECTOR |
A combined fuel injection pump and fuel nozzle. |
|
VALVE CLOSING PRESSURE |
is the fuel pressure at which the fuel injectorneedle valve snaps back on its seat. For the differential valve stem, thisis less than the nozzle opening pressure. |
|
VALVE CLOSING ORIFICE NOZZLE |
In this nozzle, the needle valvesits directly on the top of the orifice. This prevents any fuel in the sacvolume escaping into the cylinder after the valve is closed. |
|
VALVE OPENING PRESSURE |
is the fuel pressure at which the needlevalve of the injector lifts off its seat. |
|
VARIABLE INJECTION TIMING |
Altering the injection timing as theengine speed changes (advancing timing as speed increases), by a setof flywheel weights mounted on the injector pump camshaft, to obtainbetter performance. |
|
VARIABLE SPEED GOVERNOR |
Governs both the idle and maximumspeeds as well as the range in between |
|
SPOKE |
A metal part, often a wire, that runs between the rim and hub of a spoked wheel to transfer force to the hub. |
|
SPOKE CROSSING PATTERN |
Number of spokes crossed on the sameside of the hub by anyone spoke. |
|
SPOKED WHEEL |
A wheel consisting of a rim, spokes, nipples and hub.Spokes are laced between hub and rim and are attached to the rim by nipples. |
|
SPOKE TORQUE WRENCH |
A small torque wrench used to adjustaccurately the spoke tension. |
|
SPONGY LEVER or PEDAL |
A soft or spongy feeling when the brakelever or pedal is depressed. It is usually due to air in the brake lines. |
|
SPROCKET |
A circular plate with teeth machined around outside to engagelinks of a chain. |
|
SPRUNG WEIGHT |
The weight of the two wheeler components that aresupported on springs, includes the fork tube, engine, tripple clamp and frame. |
|
STAMPED FRAME |
A frame stamped from pieces of sheet metal whichare welded together to provide support for engine and suspension. |
|
STAMPED WHEEL |
A wheel assembly using stamped sheet metal spokesin place of small wire type spokes. A stamped wheel resembles a castalloy wheel in appearance. |
|
STEERING DAMPER |
A device which uses friction or a hydraulic damperto reduce steering oscillation. |
|
STEERING HEAD |
The tube at the top and front of the frame that supportsthe steering stem and is welded at a specific angle to provide the properfork angle. |
|
STEERING OFFSET |
Distance between steering axis and axis on whichthe axle pivots. Steering offset is accomplished by offsetting axle ortripple clamps. |
|
STEERING RAKE |
Angle of steering axis from vertical, given in degrees. |
|
STEERING STEM |
A shaft positioned through the steering head thatenables the front end to turn. |
|
SUSPENSION SYSTEM |
A system that consists of front forks, shock absorbers, springs and the swing arm, used to support the two wheeleron its axles and wheels. |
|
SWING ARM |
The assembly that links the rear wheel to the frame andallows the rear wheel to move up and down, and prevents the wheelfrom moving laterally and flexing at the pivot point. |
|
SWING ARM PIVOT |
Forward part of swing arm, where it is attached tothe frame and pivots on bushings or bearings. |
|
SYMMETRICAL HUB |
A wheel hub (wire wheel) which has spokeholes on each side of the hub at the same distance from hub center. |
|
TELESCOPIC FORK |
Front suspension unit made up of two fork tubes andtwo sliders that telescope up and down the tubes against spring pressure. |
|
THROTTLE CABLE |
A cable consisting of an outer housing and an innercable which connects carburettor to throttle twist grip. |
|
THROTTLE STOP SCREW |
An idle speed adjustment screw used inslide type carburettor. This screw contacts base of throttle slide. Asthe screw is turned in, throttle slide is raised, increasing idle speed. |
|
THROTTLE TWIST GRIP |
A device mounted on the end of handle bar which locates one end of outer throttle cable and pulls inner cable asthe twist grip is rotated. |
|
TRAIL |
The distance between the center of the tyre contact patch and theimaginary point where the steering head axis strikes the ground. |
|
TRANSFER PORT |
Opening in the cylinder wall of a two stroke engine which connects cylinder to crankcase. |
|
TRANSFER PORT TIMING |
Amount of time transfer port is open,expressed in crankshaft degrees or piston position. |
|
TRANSMISSION |
The part of the drive train that uses a series of gears andshafts to increase the torque and provides gear shifting to allow increasesin speed without overworking the engine. |
|
TREAD WEAR PATTERN |
The pattern of wear on the tyre which can beread to diagnose problems in the front suspension. |
|
TRIPPLE CLAMPS |
An assembly that consists of the steering stem andtwo brackets that position the fork tubes. |
|
TRIPPLE ROW CHAIN |
A chain having three rows of rollers. Tripplerow chains are used for primary drives. |
|
TWO STROKE CYCLE |
A cycle of overlapping events (intake, transfer,compression, power and, exhaust) which all occur during onerevolution of crankshaft. |
|
TYRE PRESSURE GAUGE |
A pressure gauge used to check tyre air pressure. |
|
UNIFIED BRAKE SYSTEM |
A system that automatically coordinatesthe front and rear brake systems when the rider applies pressure to thebrake pedal. |
|
UNIT CONSTRUCTION |
Engine design which has one crankcase tohouse gearbox, clutch, primary drive and engine. |
|
UNIVERSAL JOINT |
A flexible joint which allows changes in angle of drive shaft. |
|
UNSPRUNG WEIGHT |
The weight of the two wheeler components thatare not supported on springs, includes the wheel assembly, fork sliders,rear shocks, a portion of the swing arm, the chain or shaft drive, onehalf of the spring and on some models, the front fender. |
|
WET CLUTCH |
A multiple plate clutch which runs in an oil bath (primary drive). |
|
WHEEL BALANCING |
An equal distribution of weight achieved by determining where the wheel is heavier and then placing weightsopposite the heavy portion. |
|
WHEEL BASE |
Distance between the center of front wheel and the centerof rear wheel. |
|
WHEEL WEIGHT |
Small weights attached to the wheel to balance the wheel and the tyre assembly. |
|
WIDE RATIO GEARBOX |
A gearbox having wide ratio spacing betweengears. A wide ratio gear box is used in off road and trials motor cycles |
| AUTOMOTIVE VEHICLES |
TRANSMISSION DRAIN PLUG |
A plug at the bottom of thetransmission to drain the lubricant. |
| AUTOMOTIVE VEHICLES |
TRANSMISSION FILLER PLUG |
A plug on the side of the transmissionused to add transmission lubricant. |
| AUTOMOTIVE VEHICLES |
TRIM HEIGHT |
Specified level, vehicle height above the road surface. |
| AUTOMOTIVE VEHICLES |
TRIPLE POINT JOINT |
A universal joint using bearings on three axes tomaintain a constant plane of drive, making it a constant velocity joint. |
| AUTOMOTIVE VEHICLES |
TUBED TYRE |
Inside the tyre, there is an endless tube fitted with a valve. Air is forced through the valve and is retained inside the tube underpressure. The air acts as the cushioning medium. |
| AUTOMOTIVE VEHICLES |
TUBELESS TYRE |
A tyre that has the air sealed between the rim and tyreand does not use an inner tube. |
| AUTOMOTIVE VEHICLES |
TURNING RADIUS |
The relative angles of the two front wheels during aturn. |
| AUTOMOTIVE VEHICLES |
TWO DISC CLUTCH |
A clutch having two friction discs for additionalholding power used in heavy duty equipment. |
| AUTOMOTIVE VEHICLES |
TYRE |
The casing and tube assembled on a vehicle wheel to providepneumatically cushioned contact and traction with the road. |
| AUTOMOTIVE VEHICLES |
TYRE BEAD |
The inner reinforced edge of a tyre that hold it to the wheelrim. |
| AUTOMOTIVE VEHICLES |
TYRE CARCASS |
The main structural part of the tyre to which treadrubber is attached. |
| AUTOMOTIVE VEHICLES |
TYRE CONTACT PATCH |
The part of a tyre that contacts the roadsurface making a footprint. |
| AUTOMOTIVE VEHICLES |
TYRE FOOT PRINT |
The area on the road in contact with the tyre. |
| AUTOMOTIVE VEHICLES |
TYRE FORCE VARIATION |
Changes in the tyres radial spring rate as itrolls under radial loads. |
| AUTOMOTIVE VEHICLES |
TYRE SLlP |
A slight tyre slide while making a turn. |
| AUTOMOTIVE VEHICLES |
TYRE ROTATION |
Changing the position of tyres on the automobile toevenout the amount of wear. |
| AUTOMOTIVE VEHICLES |
TYRE RUNOUT |
The amount the tyre wobbles as it rotates. |
| AUTOMOTIVE VEHICLES |
TYRE SERIES |
The groupings of tyre sizes having the same aspect ratio. |
| AUTOMOTIVE VEHICLES |
TYRE TREAD |
is that part of the tyre that is designed to run on the roadsurface. The tread rubber is grooved with a pattern that will providemaximum friction force, (which provides good traction and reducesthe possibility of skidding) and minimum noise. |
| AUTOMOTIVE VEHICLES |
UNDER STEER |
The tendency of the vehicle not to turn as much as the wheels are turned. |
| AUTOMOTIVE VEHICLES |
UNITIZED CONSTRUCTION |
A type of automobile body and frameconstruction in which the frame and body parts are welded together toform a single unit. |
| AUTOMOTIVE VEHICLES |
UNSPRUNG WEIGHT |
That part of the vehicle which is not supportedon springs (the wheels and tyres for example). The vehicle weight movedby variations in the road surface. |
| AUTOMOTIVE VEHICLES |
UNIVERSAL JOINT |
The part of the drive line assembly that allows for achange in angle of the drive line as the vehicle goes over bumps. |
| AUTOMOTIVE VEHICLES |
VACUUM BRAKE |
is the device in which the braking effect is due to thedifference of pressures that acts on the opposite sides of a diaphragm.In this unit, one side of the piston or diaphragm is exposed to atmos-pheric pressure while the other side to a pressure
which is below theatmospheric pressure. |
| AUTOMOTIVE VEHICLES |
VARIABLE RATE SPRINGS |
provide a low rate for ordinary service andhigher rate for heavy obstruction or loads. These consist of a conventionalspring and below which is placed a small auxiliary spring with severalleaves. Under heavy loads, the auxiliary or helper spring
strengthens themain spring more and more as the main spring is compressed. |
| AUTOMOTIVE VEHICLES |
VARIABLE RATIO STEERING |
A steering gear that provides a differentratio during parts of a turn. |
| AUTOMOTIVE VEHICLES |
WADDLE |
A sideways vehicle shake due to a faulty radial tyre. Mostnoticeable when a vehicle moves slowly. |
| AUTOMOTIVE VEHICLES |
WANDER |
A condition in which the vehicle does not follow a straightpath and randomly drifts in one direction or the other. |
| AUTOMOTIVE VEHICLES |
WEIGHT TRANSFER |
The changes in radial loads on the front and rear wheel tyres due to the centre of gravity location ring braking. |
| AUTOMOTIVE VEHICLES |
WHEELS |
The wheels (wheel and tyre assembly) support the weight of thevehicle. The assembly provides ride quality, load carrying capacity, andvehicle handling characteristics. |
| AUTOMOTIVE VEHICLES |
WHEEL ALIGNMENT |
The position of the front wheels in relation tothe suspension and steering geometry. |
| AUTOMOTIVE VEHICLES |
WHEEL BALANCER |
A device that checks a wheel, either statically ordynamically, for balance. |
| AUTOMOTIVE VEHICLES |
WHEEL BASE |
Distance between center of the front wheel and center of rear wheels. |
| AUTOMOTIVE VEHICLES |
WHEEL CYLINDER |
In the hydraulic braking system, hydraulic cylindersplaced in the brake mechanisms at the wheels; hydraulic pressure fromthe master cylinder causes the wheel cylinders pistons to move the brakeshoes. |
| AUTOMOTIVE VEHICLES |
WHEEL FIGHT |
The tendency of a steering system to be easily deflectedby uneven road surfaces. Causes changes in toe that result in tyre wear. |
| AUTOMOTIVE VEHICLES |
WHEEL OFFSET |
The distance between wheel attachment flange and the wheel rim centre plane. |
| AUTOMOTIVE VEHICLES |
WHEEL PACK BEARING |
A preassembled self-lubricated bearing assembly used on the drive wheels with independent suspension. |
| AUTOMOTIVE VEHICLES |
WHEEL SIDEWAYS DISPLACEMENT |
Sideways movement of the wheel as the suspension goes from jounce to rebound. |
| AUTOMOTIVE VEHICLES |
WHEEL SIZES |
are indicated by three measurements, namely rim diameter,rim width and flange height. |
| AUTOMOTIVE VEHICLES |
WHEELSLlP |
Sideways movement of the tyre tread across the foot print. |
| AUTOMOTIVE VEHICLES |
WHEEL RUNOUT |
The amount the wheel wobbles as it rotates. |
| AUTOMOTIVE VEHICLES |
WHEEL TRAMP |
Tendency of the wheel to move up and down so itrepeatedly bears hard or tramps, on the pavement. Sometimes calledhigh speed shimmy. |
| AUTOMOTIVE VEHICLES |
WIND SHIELD WIPER |
A mechanism which utilizes a rubber blade to wipe the wind shield, it is either vacuum or electrically operated. |
| AIR COMPRESSORS |
INLET LINE LOADER |
An unloader that automatically opens and closesthe inlet line under pressure variations in the receivers. |
| AIR COMPRESSORS |
INTERCOOLER |
A type of surface heat exchanger placed between twocylinders of a two stage compressor so that heat of compression generatedin the first stage cylinder may be removed (in part or whole) from theair as it passes through the intercooler to the second
stage cylinder. |
| AIR COMPRESSORS |
ISOTHERMAL COMPRESSION |
Compression of air at constanttemperature. Law of compression is PV= constant. |
| AIR COMPRESSORS |
KINETIC ENERGY |
Energy due to momentum, that is, the energy of amoving body, which is equivalent to saying, dynamic inertia. |
| AIR COMPRESSORS |
MECHANICAL EQUIVALENT OF HEAT |
Relationship between theunit of heat and unit of work. |
| AIR COMPRESSORS |
MEAN EFFECTIVE PRESSURE |
The average resultant pressure actingon the piston during the stroke, that is the effective pressure whichcompresses and discharges the air. This is the difference between themean forward pressure and the mean back pressure. |
| AIR COMPRESSORS |
MECHANICAL EFFICIENCY |
The ratio of the air indicated horse powerto the brake horse power supplied to the compressor shaft. |
| AIR COMPRESSORS |
MULTISTAGE COMPRESSION |
Dividing the compression of air intotwo or more stages so as to obtain the work saving due to a nearerapproach to isothermal compression by using intercooling. |
| AIR COMPRESSORS |
PISTON SPEED |
The total distance travelled by the piston in one minute,not the actual velocity at any given instant. |
| AIR COMPRESSORS |
PORTABLE COMPRESSOR |
A small compressor which is easily movedfrom place to place. |
| AIR COMPRESSORS |
POWER |
The rate at which work is done, that is work divided by the timein which it is done. Unit of power is horse power equal to 4500 mkg/minute. |
| AIR COMPRESSORS |
POWER DRIVEN COMPRESSOR |
A compressor having a separate primemover and connected by a suitable transmission such as a belt. |
| AIR COMPRESSORS |
PRIME MOVER |
An apparatus or mechanism whereby motion and forceare received directly from some natural source of energy (fuel) andtransmitted into some motion by means of which the power may beconveniently applied. |
| AIR COMPRESSORS |
R (gas constant) |
An experimentally determined constant which is equal tothe mechanical work done by the expansion of unit weight of a perfectgas at a constant pressure while heat is added to increase its temperatureby one degree centigrade. |
| AIR COMPRESSORS |
RATIO OF COMPRESSION |
Ratio of final volume to the initial volumeduring compression. |
| AIR COMPRESSORS |
RECIPROCATING COMPRESSOR |
A compressor having a piston whichis made to move to and fro, that is forward and backward and thereby compresses and delivers air. |
| AIR COMPRESSORS |
RELATIVE HUMIDITY |
Degree of saturation of the air with water vapouras determined by the use of the wet and dry bulb thermometers. |
| AIR COMPRESSORS |
RESISTANCE |
The quality of not yielding to force or external pressure, thatquality of a body which acts in opposition to the pressure of another. |
| AIR COMPRESSORS |
ROTARY COMPRESSOR |
A compressor having a vane rotor or itsequivalent mounted eccentrically in a stationary casing. |
| AIR COMPRESSORS |
SEMI FIXED COMPRESSOR |
A unit larger than the portable type whereskids are used in place of being mounted on a truck, the adaptationbeing for service where frequent moving is not necessary. |
| AIR COMPRESSORS |
SEPARATOR |
Device through which the compressed air after being cooledin the after cooler, is sent so as to separate the moisture from the air by centrifugal force. |
| AIR COMPRESSORS |
SINGLE ACTING COMPRESSOR |
A reciprocating compressor in which compression takes place on one side of the piston duringalternate strokes. |
| AIR COMPRESSORS |
SINGLE STAGE COMPRESSOR |
A compressor in which the compressioncycle takes place in a single cylinder. |
| AIR COMPRESSORS |
SLIPPAGE EFFICIENCY |
The ratio of volume of air actually measuredto the apparent volume accounted for by the indicator diagram. |
| AIR COMPRESSORS |
SPECIFIC HEAT OF AIR |
Amount of heat that is to be supplied to raisethe temperature of 1 kg of air through 1 degree C. |
| AIR COMPRESSORS |
SPECIFIC HEAT OF AIR AT CONSTANT PRESSURE |
Total specificheat of air which is made up of (1) the internal work of raising thetemperature of air, and (2) the external work of pushing away theatmosphere to make room for its expansion. |
| AIR COMPRESSORS |
THROW OF THE ECCENTRICITY |
Twice the eccentricity or theamount of reciprocating motion produced. |
| AIR COMPRESSORS |
TWO STAGE COMPRESSOR |
A compressor in which compressionbegins in one cylinder and is completed in the second cylinder. Itdivides the compression range between the two cylinders and permitscooling between the cylinders. |
| AIR COMPRESSORS |
TWO STAGE CYLINDER |
A cylinder of special construction with a steppiston, the low pressure being at the top while the high pressure isformed around the trunk. |
| AIR COMPRESSORS |
VALVE GEAR |
The mechanism or combination of parts by which areciprocating or to and fro motion is imparted to the valve from therotary motion of the shaft. |
| AIR COMPRESSORS |
VOLUMETRIC EFFICIENCY |
The ratio of the actual number of cubicmeter of free air (at 1.03 kscm abs and 15° C) compressed per unit of time to the number of cubic meter of piston displacement during thattime. |
| AIR COMPRESSORS |
WATER COOLED COMPRESSOR |
A compressor whose cylinder is water jacketed and through which flows a current of cold water whichfunctions as a transmission medium to carry off some of the heat of compression. |
| AIR COMPRESSORS |
WORK |
The overcoming of resistance through a certain distance by theexpenditure of energy. |
| REFRIGERATION AND AIR CONDITIONING |
EMULSIFICATION |
Formation of an emulsion,i.e., a mixture of smalldroplets of two or more liquids which do not dissolve with each other. |
| REFRIGERATION AND AIR CONDITIONING |
EQUALIZERS |
Connections used with thermostatic expansion valves whenthe superheat setting of the expansion valve cannot control the amountof refrigerant which flows through the coil. |
| REFRIGERATION AND AIR CONDITIONING |
EQUILIBRIUM |
Condition existing at saturation, the molecules of therefrigerant in liquid state are changing into the vapour state as rapidly asvapour molecules are changing into the liquid state. |
| REFRIGERATION AND AIR CONDITIONING |
EUTECTIC POINT |
The lowest freezing point (temperature obtainable) when the concentration of solid in a solution is increased gradually. |
| REFRIGERATION AND AIR CONDITIONING |
EUTECTIC SOLUTION |
A solution which can be made so that it freezesand melts at a specific temperature. |
| REFRIGERATION AND AIR CONDITIONING |
EVACUATE |
To discharge refrigerant from the air conditioning systeminto the atmosphere or a holding tank, and then to vacuum pump thesystem in order to boil away any moisture. |
| REFRIGERATION AND AIR CONDITIONING |
EVAPORATOR |
Device in the low pressure side of a refrigeration systemthrough which the unwanted heat flows; absorbs the heat in the systemin order that it may be moved or transferred to the condenser. |
| REFRIGERATION AND AIR CONDITIONING |
EVAPORATOR (automotive ac system) |
Device that cools, dehumidifies,and takes the pollen and dust from the air before it enters the passengercompartment. |
| REFRIGERATION AND AIR CONDITIONING |
EVAPORATOR DUTY |
The amount of heat which can be removed by the evaporator i.e., the amount of refrigeration accomplished. |
| REFRIGERATION AND AIR CONDITIONING |
EVAPORATOR PRESSURE (temperature) |
CONTROL VALVESYSTEM Uses either a suction throttling valve, a pilot operatedabsolute valve, or an evaporator pressure regulator valve to controlevaporator temperature. |
| REFRIGERATION AND AIR CONDITIONING |
EVAPORATOR REGULATOR VALVES |
Provide independenttemperature control for each evaporator. |
| REFRIGERATION AND AIR CONDITIONING |
EXPANSION VALVE |
Metering device which provides a restriction so thatthere is a steady flow of refrigerant and also maintains the difference of pressure required to change the state of the refrigerant. |
| REFRIGERATION AND AIR CONDITIONING |
FLARING |
Method of forming or preparing the ends of tubing to connectthem directly with or through the use of fittings. |
| REFRIGERATION AND AIR CONDITIONING |
FLEXING DISC VALVE |
One type of valve commonly used incompressors. It is a one way valve. |
| REFRIGERATION AND AIR CONDITIONING |
FLOODED EVAPORATOR |
One that is full of liquid refrigerant at alltimes. Additional liquid is permitted to enter only to replace that whichboils away. |
| REFRIGERATION AND AIR CONDITIONING |
FREEZER BURN |
Surface damage due to excessive drying during freezing. |
| REFRIGERATION AND AIR CONDITIONING |
FREON 12 |
Refrigerant used in automatic air conditioners. Also known asRefrigerant -12 and R-12. |
| REFRIGERATION AND AIR CONDITIONING |
FROST HEAVE |
Refers to the movement of ground as a result of beingfrozen because of insufficient insulation underneath a cold store. |
| REFRIGERATION AND AIR CONDITIONING |
FUSES |
Devices used for protection of electrical circuits, either cartridge orplug type. |
| REFRIGERATION AND AIR CONDITIONING |
GAS VOLUME CONTROL |
Used to regulate the amount of gas neededto produce certain desired temperatures and conditions in domesticabsorption automatic control refrigerators. |
| REFRIGERATION AND AIR CONDITIONING |
GROUNDING |
Protection against static charges which sometimes buildupon operating equipment. |
| REFRIGERATION AND AIR CONDITIONING |
HALIDE LEAK DETECTOR |
Operates on acetylene to detect vapourleaks of halogen refrigerants. |
| REFRIGERATION AND AIR CONDITIONING |
HEAT OF RESPIRATION |
Heat given off by cargo. |
| REFRIGERATION AND AIR CONDITIONING |
HELIUM LIQUEFIER REFRIGERATOR |
The complete system forliquefying helium. |
| REFRIGERATION AND AIR CONDITIONING |
HERMETIC COMPRESSOR |
The compressor unit in which the motorand the compressor are manufactured as a single self contained unithoused within a casing, the electric motor is in contact, therefore withthe refrigerant. |
| REFRIGERATION AND AIR CONDITIONING |
HIGH PRESSURE CUTOUT |
A pressure operated switch which stopsthe machine on the rise of pressure to a level approaching danger, andusually has to be reset by hand. |
| REFRIGERATION AND AIR CONDITIONING |
HIGH SIDE FLOAT |
Metering system which locates the float and needlevalve on the high pressure side of the refrigeration system. |
| REFRIGERATION AND AIR CONDITIONING |
HOLD OVER PLATES |
Containers that hold the eutectic and providerefrigeration. |
| REFRIGERATION AND AIR CONDITIONING |
HUMIDITY |
Moisture in air. |
| REFRIGERATION AND AIR CONDITIONING |
HUMIDISTAT |
Operating control which reacts to variation in humidity. |
| REFRIGERATION AND AIR CONDITIONING |
ICE MAKING CAPACITY |
Ability of a refrigerating system to make ice,starting with water at room temperature. |
| REFRIGERATION AND AIR CONDITIONING |
INDICATED HORSE POWER |
Rate at which work is usefully expendedin the compressor i.e., actually utilized in compressing the refrigerantvapour and expelling it from the compressor. |
| REFRIGERATION AND AIR CONDITIONING |
INDUCTIVE DEVICE |
Designed to convert electrical energy to magneticand then to mechanical energy. |
| REFRIGERATION AND AIR CONDITIONING |
INSULATION |
Any material that effectively slows down the transfer of heat. |
| REFRIGERATION AND AIR CONDITIONING |
INSULATORS |
Materials that normally deter the flow of electrons. |
| REFRIGERATION AND AIR CONDITIONING |
LATENT HEAT |
Heat energy which causes a change of state without any change of temperature. |
| REFRIGERATION AND AIR CONDITIONING |
LIMITING CONTROLS |
Safety controls. |
| REFRIGERATION AND AIR CONDITIONING |
LIQUID LINE CHARGING VALVE |
Used for high side charging. |
| REFRIGERATION AND AIR CONDITIONING |
LIQUID LINE SHUT OFF VALVE |
Manual valve installed in liquid linenear condenser well to shut off flow of refrigerant between the condenserand the liquid line. |
| REFRIGERATION AND AIR CONDITIONING |
LIQUID NITROGEN SHIELD |
At room temperature, it can absorb any heat leakage from outside and reduce temperature between itself andcryogenic refrigerant surrounding the cable. |
| REFRIGERATION AND AIR CONDITIONING |
LIQUID NITROGEN SYSTEM |
A non-mechanical refrigeration systemfor transport use. |
| REFRIGERATION AND AIR CONDITIONING |
LITHIUM BROMIDE |
Used in combination with water in absorptioncooling systems. |
| REFRIGERATION AND AIR CONDITIONING |
LOW PRESSURE CONTROL |
An electric switch responsive to pressure,connected into the low pressure part of a refrigeration system. Usually closes at high and opens at low pressure. |
| REFRIGERATION AND AIR CONDITIONING |
LOW PRESSURE CUTOFF SWITCH |
Senses system pressure only, wiredin series with the magnetic clutch. |
| REFRIGERATION AND AIR CONDITIONING |
LOW SIDE FLOAT |
Metering system which locates a float in the low pressure side of the refrigeration system. |
| REFRIGERATION AND AIR CONDITIONING |
LOW TEMPERATURE TRANSPORT |
Refrigerated trucks that maintaintemperatures in the range of 0°C and below. |
| REFRIGERATION AND AIR CONDITIONING |
MANIFOLDING |
In direct expansion or dry evaporators, the method of circulating the refrigerant through separate rows of tubes. |
| REFRIGERATION AND AIR CONDITIONING |
MANUAL CONTROL SYSTEM |
An A/C system in which the driver of an automotive vehicle selects heating and cooling by use of a lever whichmixes warm and cold air to desired temperature. |
| REFRIGERATION AND AIR CONDITIONING |
METERING DEVICES |
Restrict the flow of the refrigerant from the highto the low side, regulate the flow of the refrigerant according to theneeds of the system. |
| REFRIGERATION AND AIR CONDITIONING |
METHYLENE CHLORIDE (CH2Cl2) |
A halogenated hydrocarbon whichis considered a safe refrigerant. |
| REFRIGERATION AND AIR CONDITIONING |
MODULATING CONTROLS |
Provide for variations by steps ascontrasted to the off and on operation of the refrigeration systems withordinary controls. |
| REFRIGERATION AND AIR CONDITIONING |
MODULATING THERMOSTAT |
Used to operate dampers on DX coilsand valves for varying the flow of chilled water. |
| REFRIGERATION AND AIR CONDITIONING |
MODULATING THERMOSTATIC EXPANSION VALVE |
Varies thecapacity of the valve in response to variations in load on the system. |
| REFRIGERATION AND AIR CONDITIONING |
MOISTURE VAPOUR SEAL |
A tight barrier placed outside the insulationto prevent pushing of moisture through the insulation by vapourpressure. |
| REFRIGERATION AND AIR CONDITIONING |
MULTIPLE UNIT INSTALLATION |
One in which two or moreevaporators in different refrigerators are operated from one compressor,or vice versa. |
| REFRIGERATION AND AIR CONDITIONING |
NONFLEXING RING PLATE TYPE VALVE |
One type of valvecommonly used in compressors. |
| REFRIGERATION AND AIR CONDITIONING |
NONFROSTING EVAPORATORS |
Use only the thermostatic expansionvalve type of refrigerant control, operate at a temperature close tofreezing. |
| REFRIGERATION AND AIR CONDITIONING |
NONMECHANICAL REFRIGERATION SYSTEMS |
Those that obtainthe required high and low pressures by some method other than amechanical compressor. |
| REFRIGERATION AND AIR CONDITIONING |
OIL FAILURE RELAY |
An oil pressure switch inserted in the compressorlubricating system and wired to shut down the machine in the event of an oil failure. |
| REFRIGERATION AND AIR CONDITIONING |
OIL SEPARATOR |
Device used to separate oil from the refrigerant gas,returning the oil to the compressor and allowing the refrigerant tocontinue on its circuit through the refrigerating system. |
| REFRIGERATION AND AIR CONDITIONING |
OPEN SYSTEM |
Chilled water is sprayed into the air to be cooled and it isthen collected in the air washer tank and returned to the flash tank andis again cooled. |
| REFRIGERATION AND AIR CONDITIONING |
OPERATING CONTROLS |
Sensitive to changes in the desired conditionssuch as temperature (or its related pressure) and humidity. |
| REFRIGERATION AND AIR CONDITIONING |
pH VALUE |
Logarithm to base 10 of the reciprocal of the concentration of hydrogen ions. Measure of the acidity or alkalinity of a solution. |
| REFRIGERATION AND AIR CONDITIONING |
PRESSOSTAT |
An automatic switch connected by a small bore tube to thesuction of the compressor, stopping the latter when the pressure falls to acertain value and starting it again after a definite rise in pressure. |
| REFRIGERATION AND AIR CONDITIONING |
PRESSURE RELIEF VALVE |
Used to minimize the possibility of explosion when air temperature surrounding a refrigeration system may rise to apoint where it causes the pressure of the refrigerant gas to increase to adanger point. |
| REFRIGERATION AND AIR CONDITIONING |
PRIMARY REFRIGERANT |
A substance used as the working fluid in thevapour compression cycle, as distinct from a secondary refrigerant, whichin some cases is used as an intermediate conveyor of heat between thesubstance to be cooled and the primary refrigerant. |
| REFRIGERATION AND AIR CONDITIONING |
PSYCHROMETRIC CHART |
A graph, the coordinates of which are usually either dry bulb temperature and absolute humidity, or enthalpy (totalheat) and absolute humidity. Families of lines are there showing constantdry bulb temperatures, wet bulb temperatures, enthalpies,
absolutehumidities, relative or percentage humidities and specific volumes. |
| REFRIGERATION AND AIR CONDITIONING |
PURGING |
A method of removing air and moisture from a refrigeratingsystem by means of the refrigerant gas pushing some of the air ahead of it and out of the system. |
| REFRIGERATION AND AIR CONDITIONING |
REFRIGERANT |
Substance which is circulated in a refrigeration system totransfer heat. |
| REFRIGERATION AND AIR CONDITIONING |
REFRIGERANT FAMILY |
Safest group of refrigerants produced by manipulating the atoms of carbon tetrachloride with those of fluorineand hydrogen. |
| REFRIGERATION AND AIR CONDITIONING |
REFRIGERATING CAPACITY |
The ability of a system to remove heatas compared with the cooling effect produced by the melting of ice,expressed as a rate of heat removal, kcal/ hr or tons/ 24 hrs. |
| REFRIGERATION AND AIR CONDITIONING |
REFRIGERATION SYSTEM |
The part of the refrigeration/ airconditioning system that includes compressor, condenser, evaporator,control valves and switches and tubing. It absorbs the heat from air inthe duct housing/space and transfers it to the outdoors. |
| REFRIGERATION AND AIR CONDITIONING |
RELATIVE HUMIDITY |
The percentage of moisture in the air compared with the maximum amount that the air can hold, at the prevailingtemperature. Also expressed as the ratio of the pressure of the watervapour present to the maximum possible water pressure at the prevailingtemperature. |
| REFRIGERATION AND AIR CONDITIONING |
RESISTIVE CRYOGENIC SYSTEM |
Uses nitrogen to cool the electricalconductors to temperatures where their electrical resistance is very low. |
| REFRIGERATION AND AIR CONDITIONING |
REVERSE CYCLE REFRIGERATION |
Uses rejected heat to produce warmth. |
| REFRIGERATION AND AIR CONDITIONING |
ROTARY COMPRESSOR |
Compressor which consists of a cylindricalcasing containing a shaft whose axis is eccentric to that of the cylinder,the shaft carries a rotor having radial slots in which blades slide and thetip of the blades press against the casing by their
inertia or with the aidof springs. |
| REFRIGERATION AND AIR CONDITIONING |
SAFETY HEAD |
Unit which is not fixed to the top of the cylinder but isheld down by heavy springs and allows the passage of liquid refrigerantor oil, which it does by lifting bodily whenever the pressure in thecylinder becomes abnormally high. |
| REFRIGERATION AND AIR CONDITIONING |
SEALED UNIT |
The compressor unit in which the compressor, usually rotary, and the driving motor are contained within a welded steel shell. |
| REFRIGERATION AND AIR CONDITIONING |
SECONDARY REFRIGERANT |
Chilled liquid like water which iscirculated to distant units where the air is to be cooled in individualrooms. |
| REFRIGERATION AND AIR CONDITIONING |
SEMI HERMETIC COMPRESSOR |
The compressor unit in which themotor and compressor are a single unit, but the motor is detachablefrom the compressor and therefore capable of field repairs. |
| REFRIGERATION AND AIR CONDITIONING |
SHELL AND COIL CONDENSER |
A cylindrical shell, usually vertical,containing a water coil, and within the shell the refrigerant is condensed. |
| REFRIGERATION AND AIR CONDITIONING |
SHELL AND TUBE EVAPORATOR |
An evaporator having a cylindricalcasing, containing a number of tubes through which the liquid to becooled flows and the refrigerant is contained within the casing. |
| REFRIGERATION AND AIR CONDITIONING |
SHRADER VALVE |
A spring loaded valve through which a connection canbe made to a refrigeration system, also used in vehicle tyres. |
| REFRIGERATION AND AIR CONDITIONING |
SIGHT GLASS |
In a car air conditioner, a viewing glass or window set inthe refrigerant line, usually in the top of the receiver dehydrator, thesight glass allows a visual check of the refrigerant passing from the receiverto the evaporator. |
| REFRIGERATION AND AIR CONDITIONING |
SILICA GEL |
Desicant which operates by adsorption of water molecules. |
| REFRIGERATION AND AIR CONDITIONING |
SINGLE THICKNESS FLARE |
The part of the tubing that forms theflare is the thickness of the tubing. |
| REFRIGERATION AND AIR CONDITIONING |
SPRAY HEADER |
Perforated pipe mounted along the ceiling of the cargocompartment of a transport. |
| REFRIGERATION AND AIR CONDITIONING |
STEAM JET SYSTEM |
Uses a device in which the extremely rapid flow of a vapour through a narrow tube reduces the pressure and permitsevaporation of a liquid, produces a cooling effect. |
| REFRIGERATION AND AIR CONDITIONING |
STRONG AQUA |
An ammonia and water solution with a concentrationof almost 30 per cent ammonia, used in ammonia absorption coolingsystem. |
| REFRIGERATION AND AIR CONDITIONING |
SUCTION LINE |
Runs from evaporator to compressor, returns the heatladen gases from the evaporator. |
| REFRIGERATION AND AIR CONDITIONING |
SUCTION SERVICE VALVE |
Manual shut off valve installed on thecompressor. Also called suction valve. |
| REFRIGERATION AND AIR CONDITIONING |
SUCTION THROTTLE VALVE |
The compressor is in continuousoperation and the valve is opened and closed by sensing the actualevaporator operating pressure. |
| REFRIGERATION AND AIR CONDITIONING |
SULPHURDIOXIDE |
An old refrigerant that was used to recharge units. |
| REFRIGERATION AND AIR CONDITIONING |
SUPERHEATING |
The rise in temperature resulting from the addition of heatto the refrigerant vapour either in the evaporator or in the suction line. |
| REFRIGERATION AND AIR CONDITIONING |
SUPERHEAT SWITCH |
Designed to protect the A/C system compressoragainst damage when the refrigerant charge is partially or totally lost. |
| REFRIGERATION AND AIR CONDITIONING |
SUPER INSULATION |
Alternate layers of radiation shields and spacermaterial operating in a high vacuum. |
| REFRIGERATION AND AIR CONDITIONING |
SURGE CHAMBER |
A drum or container into which liquid enters fromthe metering device in order to recirculate the refrigerant in a floodedevaporator. |
| REFRIGERATION AND AIR CONDITIONING |
SWAGING |
A means of shaping copper tubing so that two pieces may be joined without the use of a fitting. |
| REFRIGERATION AND AIR CONDITIONING |
TEMPERATURE CONTROL |
An electric switch responsive totemperature of thermostatic bulb or element. |
| REFRIGERATION AND AIR CONDITIONING |
TERMINAL DEWARS |
Insulated containers used to prevent heat transferand permit the individual conductor phases to be connected intothermally and electrically graded pot head assemblies. |
| REFRIGERATION AND AIR CONDITIONING |
THERMAL LIMITER FUSES |
Designed to protect the A/C systemcompressor against damage when the refrigerant charge is partially ortotally lost. |
| REFRIGERATION AND AIR CONDITIONING |
THERMOELECTRIC REFRIGERATION |
Depends upon passingelectrical energy to a couple through two dissimilar semiconductors. |
| REFRIGERATION AND AIR CONDITIONING |
THERMOPNEUMATIC AIR CONDITIONING SYSTEM |
System which uses the mechanical principles of the thermostat to monitorvacuum motors which adjust the air valves and switches. |
| REFRIGERATION AND AIR CONDITIONING |
THERMOSTAT |
An automatic switch, the opening and closing of whichis actuated by change of temperature. |
| REFRIGERATION AND AIR CONDITIONING |
THERMOSTATIC EXPANSION VALVE |
Control valve which maintainsconstant superheat in the evaporator, also used for the temperaturecontrol, operates on increased pressure resulting from a rise intemperature. Also called THERMOSTATIC VALVE. |
| REFRIGERATION AND AIR CONDITIONING |
THROTTLING VALVE |
Dampens fluctuations of pressure gauge andprovides a way to close off the port entirely. |
| REFRIGERATION AND AIR CONDITIONING |
TON REFRIGERATION |
A ton refrigeration (TR) is that rate of removalof heat which would transform water at 0°C into ice at the sametemperature at the rate of one ton in every 24 hours. |
| REFRIGERATION AND AIR CONDITIONING |
VACUUM PUMP |
A device used to evacuate systems in preparation forcharging them with a refrigerant. |
| REFRIGERATION AND AIR CONDITIONING |
VALVE RETAINER |
A device which limits the lift of the valve. |
| REFRIGERATION AND AIR CONDITIONING |
WATER CONTROL VALVE |
Used in A/C systems to regulate the flow of coolant to the heater core. |
| REFRIGERATION AND AIR CONDITIONING |
WATER ICE REFRIGERATION SYSTEM |
Heat is absorbed as ice melts,producing the desired cooling effect. |
| REFRIGERATION AND AIR CONDITIONING |
WET BULB TEMPERATURE |
The temperature read, by a wet bulbthermometer, this is an ordinary thermometer the bulb of which is wetted by being surrounded by a sheath of muslin kept wet by pure water. |