lateral

Pipe Size		F	G	Approx. Weight (lb)
Run	Branch	F	G	Approx. Weight (lb)
3	3	10	3	50
4	3	12	3	70
4	4	12	3	75
6	4	14 1/2	3 1/2	105
6	6	14 1/2	3 1/2	130
8	4	17 1/2	4 1/2	153
8	6	17 1/2	4 1/2	190
8	8	17 1/2	4 1/2	200
10	4	20 1/2	5	230
10	6	20 1/2	5	290
10	8	20 1/2	5	335
10	10	20 1/2	5	300
12	4	24 1/2	5 1/2	355
12	6	24 1/2	5 1/2	370
12	8	24 1/2	5 1/2	395
12	10	24 1/2	5 1/2	420
12	12	24 1/2	5 1/2	460
14	6	27	6	500
14	8	27	6	525
14	10	27	6	555
14	12	27	6	600
14	14	27	6	640
16	6	30	6 1/2	655
16	8	30	6 1/2	680
16	10	30	6 1/2	715
16	12	30	6 1/2	755
16	14	30	6 1/2	800
16	16	30	6 1/2	850
18	8	32	7	820
18	10	32	7	855
18	12	32	7	1005
18	14	32	7	940
18	16	32	7	990
18	18	32	7	1035
20	10	35	8	1095
20	12	35	8	1130
20	14	35	8	1170
20	16	35	8	1220
20	20	35	8	1345
24	24	40 1/2	9	2020
36	36	60	19 1/2	5740

Flanged lateral fittings are not included in AWWA C110/A21.10
For flange dimensions see Flange – ANSI Class 125, C110, DI
AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.

Pipe Size (NPS)	S	T	Approx. Weight (lb)
Pipe Size (NPS)	S	T	STD	XS
1/2	–	–	–	–
3/4	–	–	–	–
1	2 1/2	6 1/2	2.5	3.0
1 1/4	2 3/4	7	3.5	4.5
1 1/2	3	8	4.5	6.0
2	4	8 1/2	6.5	8.8
2 1/2	4 1/2	10	12.0	15.0
3	5	11	16.0	22.0
3 1/2	5 1/2	12	22.0	30.0
4	6	13	29.0	38.0
5	7	14 1/2	42.0	59.0
6	8	16 1/2	61.0	89.0
8	10	20	110.0	163.0
10	12	23	175.0	233.0
12	13	27	244.0	318.0
14	14	30	281.0	366.0
16	16	33	392.0	444.0
18	17	36	472.0	632.0
20	18	40	581.0	686.0
22	–	–	–	–
24	20	46	781.0	1040.0

Flanged Lateral – AWWA C110, DI (in)