Showing posts with tag: Imperial

Mechanical Joint Tees – Full Body, AWWA C110, DI (in)

Pipe Size Dimensions (in) Approx. Weight (lb) MJ
RUN (E) Branch (F) RUN (G)
* 2x2x2 3.25 3.25 – 21
* 3x3x2 3.25 3.25 – 45
3x3x3 5.5 5.5 13.5 58
* 4x4x2 4.8 4.8 14.5 68
4x4x3 6.5 6.5 14.5 77
4x4x4 6.5 6.5 14.5 78
4x4x6 8 8 – 112
* 6x6x2 8 8 – 78
6x6x3 8 8 16 112
6x6x4 8 8 16 110
6x6x6 8 8 16 119
6x6x8 9 9 – 158
8x8x3 9 9 17 155
8x8x4 9 9 17 157
8x8x6 9 9 17 175
8x8x8 9 9 17 199
10x10x4 11 11 19 –
10x10x6 11 11 19 258
10x10x8 11 11 19 268
10x10x10 11 11 19 300
12x12x4 12 12 20 318
12x12x6 12 12 20 325
12x12x8 12 12 20 335
12x12x10 12 12 20 392
12x12x12 12 12 20 396
14x14x12 14 14 22 540
14x14x14 14 14 22 585
* 16x16x4 15 15 23 600
16x16x6 15 15 23 615
16x16x8 15 15 23 625
16x16x10 15 15 23 645
16x16x12 15 15 23 660
16x16x16 15 15 23 740
18x18x6 13 15.5 – 710
18x18x8 13 15.5 – 674
18x18x12 13 15.5 – 749
18x18x18 16.5 16.5 – 945
20x20x6 14 17 – 849
20x20x8 14 17 – 892
20x20x12 14 17 – 896
20x20x16 18 18 – 1095
20x20x20 18 18 – 1258
24x24x6 15 19 – 1233
24x24x8 15 19 – 1234
24x24x12 15 19 – 1256
24x24x14 15 19 – 1220
24x24x16 15 19 – 1245
24x24x18 22 22 – 1735
24x24x20 22 22 – 1720
24x24x24 22 22 – 1947
30x30x6 18 23 – 2050
30x30x8 18 23 – 2060
30x30x10 18 23 – 2075
30x30x12 18 23 – 2090
30x30x16 18 23 – 2145
30x30x18 18 23 – 2170
30x30x20 18 23 – 2205
30x30x24 25 25 – 2880
30x30x30 25 25 – 2275
36x36x6 20 26 – 2439
36x36x8 20 26 – 2444
36x36x10 20 26 – 2535
36x36x12 20 26 – 2541
36x36x14 20 26 – 2570
36x36x16 20 26 – 2585
36x36x18 20 26 – 2610
36x36x20 20 26 – 2635
36x36x24 20 26 – 2792
36x36x30 28 28 – 3545
36x36x36 28 28 – 3450
42x42x24 23 30 – 3690
42x42x30 31 31 – 4650
42x42x36 31 31 – 4880
42x42x42 31 31 – 6320
48x48x24 26 34 – 4995
48x48x30 26 34 – 5140
48x48x36 34 34 – 6280
48x48x42 34 34 – 8130
48x48x48 34 34 – 8420
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint Dimensions – Full Body, AWWA C110, DI (in)

 Pipe SizeABCDF1/3XJK1K2LMNOPS
# 2 2.50 2.50 3.39 3.50 2.61 28° 3/4 4.75 6.25 6.25 0.75 0.62 1.12 0.31 0.63 0.52
3 3.96 2.50 4.84 4.94 4.06 28° 3/4 6.19 7.69 7.69 0.94 0.62 1.37 0.31 0.63 0.52
4 4.80 2.50 5.92 6.02 4.90 28° 7/8 7.50 9.12 9.12 1.00 0.75 1.50 0.31 0.75 0.65
6 6.90 2.50 8.02 8.12 7.00 28° 7/8 9.50 11.12 11.12 1.06 0.88 1.63 0.31 0.75 0.70
8 9.05 2.50 10.17 10.27 9.15 28° 7/8 11.75 13.37 13.37 1.12 1.00 1.75 0.31 0.75 0.75
10 11.10 2.50 12.22 12.34 11.20 28° 7/8 14.00 15.69 15.62 1.19 1.00 1.75 0.31 0.75 0.80
12 13.20 2.50 14.32 14.44 13.30 28° 7/8 16.25 17.94 17.88 1.25 1.00 1.75 0.31 0.75 0.85
14 15.30 3.50 16.40 16.54 15.44 28° 7/8 18.75 20.31 20.25 1.31 1.25 2.00 0.31 0.75 0.89
16 17.40 3.50 18.50 18.64 17.54 28° 7/8 21.00 22.56 22.50 1.38 1.31 2.06 0.31 0.75 0.97
18 19.50 3.50 20.60 20.74 19.64 28° 7/8 23.25 24.83 24.75 1.44 1.38 2.13 0.31 0.75 1.05
20 21.60 3.50 22.70 22.84 21.74 28° 7/8 25.50 27.08 27.00 1.50 1.44 2.19 0.31 0.75 1.12
24 25.80 3.50 26.90 27.04 25.94 28° 7/8 30.00 31.58 31.50 1.62 1.56 2.31 0.31 0.75 1.22
30 32.00 4.00 33.29 33.46 32.17 20° 1 1/8 36.88 39.12 39.12 1.81 2.00 2.75 0.38 1.00 1.50
36 38.30 4.00 39.59 39.76 38.47 20° 1 1/8 43.75 46.00 46.00 2.00 2.00 2.75 0.38 1.00 1.80
42 44.50 4.00 45.79 45.96 44.67 20° 1 1/8 50.62 53.12 53.12 2.00 2.00 2.75 0.38 1.00 1.95
48 50.80 4.00 52.09 52.26 50.97 20° 1 1/8 57.50 60.00 60.00 2.00 2.00 2.75 0.38 1.00 2.20
# 2 2 5/8 3 45 – 60 5 2.50
3 4 5/8 3 45 – 60 7 3.96
4 4 3/4 3 1/2 75 -90 10 4.80
6 6 3/4 3 1/2 75 -90 16 6.90
8 6 3/4 4 75 -90 25 9.05
10 8 3/4 4 75 -90 30 11.10
12 8 3/4 4 75 -90 40 13.20
14 10 3/4 4 1/2 75 -90 45 15.30
16 12 3/4 4 1/2 75 -90 55 17.40
18 12 3/4 4 1/2 75 -90 65 19.50
20 14 3/4 4 1/2 75 -90 85 21.60
24 16 3/4 5 75 -90 105 25.80
30 20 1 6 100 -120 220 32.00
36 24 1 6 100 -120 301 38.30
42 28 1 1/4 6 1/2 100 -120 389 44.50
48 32 1 1/4 6 1/2 100 -120 477 50.80
  • *  These fittings are not included in AWWA C110/A21.10
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
by
Tags: , , , , , , , ,

Mechanical Joint Crosses – Full Body, AWWA C110, DI (in)

Pipe SizeDimensions (in)Approx. Weight (lb)
RunBranchJKMJ*  MJ x FLG
6 6 8.0 8.0 160 141
8 4 9.0 9.0 185 –
8 6 9.0 9.0 205 182
8 8 9.0 9.0 255 245
10 6 11.0 10.0 285 –
10 8 11.0 11.0 310 –
10 10 11.0 11.0 380 360
12 6 12.0 12.0 361 367
12 8 12.0 12.0 371 373
12 12 12.0 12.0 486 487
14 8 14.0 14.0 550 –
14 14 14.0 14.0 779 –
16 6 15.0 15.0 650 –
16 8 15.0 15.0 675 655
16 16 15.0 15.0 895 875
18 8 13.0 15.5 775 –
18 10 13.0 15.5 760 –
18 12 13.0 15.5 860 –
18 18 16.5 16.5 1140 –
20 8 14.0 17.0 951 –
20 12 14.0 17.0 977 –
20 16 18.0 18.0 1245 –
20 20 18.0 18.0 1440 –
24 8 15.0 19.0 1244 –
24 12 15.0 19.0 1326 –
24 16 15.0 19.0 1479 –
24 20 22.0 22.0 1965 –
24 24 22.0 22.0 2192 –
30 6 18.0 23.0 2085 –
30 12 18.0 23.0 2165 –
30 24 25.0 25.0 3180 –
30 30 25.0 25.0 3640 –
36 24 20.0 26.0 2910 –
36 36 28.0 28.0 4370 –
42 42 31.0 31.0 7145 –
48 24 26.0 34.0 5210 –
48 36 34.0 34.0 6790 –
48 48 34.0 34.0 9380 –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint 90 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RABMJ x MJMJ x PEMJ x FLG
*  2 2.25 3.25 – 16 – –
3 4.0 5.5 13.5 26 36 –
4 4.5 6.5 14.5 56 53 51
6 6.0 8.0 16.0 88 80 75
8 7.0 9.0 17.0 123 119 118
10 9.0 11.0 19.0 189 181 168
12 10.0 12.0 20.0 268 252 288
14 11.5 14.0 22.0 380 – –
16 12.5 15.0 23.0 552 470 465
18 14.0 16.5 24.5 625 600 577
20 15.5 18.0 26.0 862 775 –
24 18.5 22.0 30.0 1423 1301 1150
30 21.5 25.0 33.0 1942 1920 –
36 24.5 28.0 36.0 2629 2310 –
42 27.5 31.0 – 3410 – –
48 30.5 34.0 – 4595 – –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , ,

Mechanical Joint 45 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
*  2 1.96 1.8 – 16 – –
3 3.62 3.0 11.0 30 – –
4 4.81 4.0 12.0 53 48 45
6 7.25 5.0 13.0 77 60 69
8 8.44 5.5 13.5 110 107 111
10 10.88 6.5 14.5 172 168 167
12 13.25 7.5 15.5 222 215 218
14 12.06 7.5 15.5 311 – –
16 13.25 8.0 16.0 364 360 360
18 14.50 8.5 16.5 531 430 455
20 16.88 9.5 17.5 655 543 664
24 18.12 11.0 19.0 865 1099 825
30 27.75 15.0 23.0 1447 – 1510
36 35.00 18.0 26.0 2435 – 1930
42 42.25 21.0 – 2955 – –
48 49.50 24.0 – 4080 – –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint 22 1/2 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
3 7.56 3.0 11.0 30 – –
4 10.06 4.0 12.0 52 – –
6 15.06 5.0 13.0 77 71 70
8 17.62 5.5 13.5 110 107 109
10 22.62 6.5 14.5 156 155 163
12 27.62 7.5 15.5 221 215 224
14 25.12 7.5 15.5 300 – –
16 27.62 8.0 16.0 391 315 365
18 30.19 8.5 16.5 527 422 455
20 35.19 9.5 17.5 611 – 575
24 37.69 11.0 19.0 986 800 930
30 57.81 15.0 23.0 1898 – 1540
36 72.88 18.0 26.0 2372 – 1970
42 88.00 21.0 – 3020 – –
48 103.06 24.0 – 4170 – –
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Mechanical Joint 11 1/4 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
3 15.25 3.0 11.0 30 – –
4 20.31 4.0 12.0 52 – –
6 30.50 5.0 13.0 65 71 –
8 35.50 5.5 13.5 104 105 –
10 45.69 6.5 14.5 171 – –
12 55.81 7.5 15.5 221 215 –
14 50.75 7.5 15.5 305 – –
16 55.81 8.0 16.0 391 367 –
18 60.94 8.5 16.5 525 422 –
20 71.06 9.5 17.5 605 – –
24 76.12 11.0 19.0 996 800 972
30 116.75 15.0 23.0 1410 – 1305
36 147.25 18.0 26.0 2397 – 2185
42 177.69 21.0 – 3035 – –
48 208.12 24.0 – 4190 – –
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

Swage Conc./Ecc.

Pipe Size (NPS)Reduce toLTBDimension A & C
1/81/43/81/23/411-1/41-1/222-1/234681010
1/8 – – 1/4 – – 2-1/2 2-1/2 2-1/2 – – – – – – – – – – – –
1/4 1/8 2-1/4 3/8 2-3/8 2-1/8 – 2-3/8 2-3/8 2-5/8 3-1/8 3-5/8 4-1/2 6-1/8 6-5/8 7-5/8 8-5/8 – – – –
3/8 1/8 to 1/4 2-1/2 3/8 2-3/8 2-1/8 2 – 2-3/8 2-5/8 3-1/8 3-5/8 4-1/2 6-1/8 6-5/8 7-5/8 8-5/8 – – – –
1/2 1/8 to 3/8 2-3/4 1/2 2-1/4 2 1-7/8 – – 2-1/2 3 3-1/2 4 6 6-1/2 7-1/2 8-1/2 11-1/2 – – –
3/4 1/8 to 1/2 3 9/16 2-7/16 – 2-1/16 2-1/16 1-15/16 – 2-15/16 3-7/16 3-15/16 5-15/16 6-7/16 7-7/16 8-7/16 11-7/16 – – –
1 1/8 to 3/4 3-1/2 11/16 2-13/16 – 2-7/16 2-7/16 2-5/16 2-1/16 – 3-5/16 3-13/16 5-13/16 6-5/16 7-5/16 8-5/16 11-5/16 – – –
1 1/4 1/4 to 1 4 11/16 3-5/16 – 2-15/16 2-15/16 2-13/16 2-3/4 2-5/8 – 3-13/16 5-13/16 6-5/16 7-5/16 8-5/16 11-5/16 – – –
1 1/2 1/4 to 1-1/4 4-1/2 11/16 3-13/16 – 3-7/16 3-7/16 3-5/16 3-1/4 3-1/8 3-1/8 – 5-13/16 6-5/16 7-5/16 8-5/16 11-5/16 – – –
2 1/4 to 1-1/2 6-1/2 3/4 5-3/4 – 5-3/8 5-3/8 5-1/4 5-3/16 5-1/16 5-1/16 5-1/16 – 6-1/4 7-1/4 8-1/4 11-1/4 12-1/4 14-1/4 15-1/4
2 1/2 1/4 to 2 7 15/16 6-1/16 – 5-11/16 5-11/16 5-9/16 5-1/2 5-3/8 5-3/8 5-3/8 5-5/16 – 7-1/16 8-1/16 11-1/16 12-1/16 14-1/16 15-1/16
3 1/4 to 2-1/2 8 1 7 – 6-5/8 6-5/8 6-1/2 6-7/16 6-5/16 6-5/16 6-5/16 6-1/4 6-1/16 – 8 11 12 14 15
3 1/2 1/4 to 3 8 1 1/16 – – – – – – – – – – – – – – – – –
4 1/4 to 3-1/2 9 1-1/8 7-7/8 – 7-1/2 7-1/2 7-3/8 7-5/16 7-3/16 7-3/16 7-3/16 7-1/8 6-15/16 6-1/2 – – – – –
5 1/2 to 4 11 – – – – – – – – – – – – – – – – – –
6 1/2 to 5 12 1-5/16 10-11/16 – – – 10-3/16 10-1/2 10 10 10 9-13/16 9-3/4 9-11/16 9-9/16 – 11-11/16 13-11/16 14-11/16
8 2 to 6 13 1-7/16 11-9/16 – – – – – – – – 10-13/16 10-5/8 10-9/16 10-9/16 10-1/4 – 13-9/16 14-9/16
10 2 to 8 15 1-5/8 13-3/8 – – – – – – – – 12-5/8 12-7/8 12-3/8 12-1/4 12-1/16 11-15/16 – 14-3/8
12 2 to 10 16 1-3/4 14-1/2 – – – – – – – – 13-1/2 13-5/16 13-1/4 13-1/8 12-15/16 12-13/16 12-5/8 –
14 2 to 12 17 – – – – – – – – – – – – – – – – – –
16 2 to 14 18 – – – – – – – – – – – – – – – – – –
18 2 to 16 20 – – – – – – – – – – – – – – – – – –
20 2 to 18 22 – – – – – – – – – – – – – – – – – –
24 6 to 20 24 – – – – – – – – – – – – – – – – – –
  • A swage is used to connect buttwelded and screwed piping to smaller or larger buttweld or screwed pipe.
  • T = Nominal thread engagement to make tight joints.
by
Tags: , , , , , , , ,

90° 3R – ANSI

Pipe Size (NPS)CApprox. Weight (lb)
STDXS
1/2 – – –
3/4 – – –
1 – – –
1 1/4 – – –
1 1/2 – – –
2 6 3.0 4.0
2 1/2 7 1/2 6.0 8.0
3 9 10.0 13.0
3 1/2 10 1/2 13.0 18.0
4 12 18.0 25.0
5 15 29.0 43.0
6 18 45.0 70.0
8 24 90.0 140.0
10 30 159.0 218.0
12 36 233.0 310.0
14 42 298.0 400.0
16 48 390.0 520.0
18 54 495.0 660.0
20 60 610.0 810.0
22 66 735.0 980.0
24 72 875.0 1170.0
  • Dimensions per ANSI/ASME B16.9.
  • A 90° elbow three radius is a long radius (LR) with the centerline curvature equal to 3 times the nominal pipe size (NPS).
by
Tags: , , , , , , ,

90° SR, Long Tangent ANSI

Pipe Size (NPS)ABCApprox. Weight (lb)
STDXS
1/2 – – – – –
3/4 – – – – –
1 – – – – –
1 1/4 – – – – –
1 1/2 – – – – –
2 – – – – –
2 1/2 – – – – –
3 – – – – –
3 1/2 – – – – –
4 – – – – –
5 – – – – –
6 – – – – –
8 10 2 8 41.0 63.0
10 12 1/2 2 1/2 10 74.0 100.0
12 15 3 12 109.0 142.0
14 17 1/2 3 1/2 14 140.0 189.0
16 20 4 16 172.0 241.0
18 22 1/2 4 1/2 18 218.0 305.0
20 25 5 20 275.0 387.0
22 30 6 24 390.0 546.0
24 32 6 26 460.0 620.0
  • Dimensions per ANSI/ASME B16.9.
  • A 90° elbow long tangent is a short radius (SR) with the centerline curvature equal to 1 times the nominal pipe size (NPS) and a straight extension at both ends (long tangent) for 8 inch and larger sizes. Tangent elbows provide a straight length at the end to accept a Slip-on Flange. The tangent end for the flange is not beveled.
by
Tags: , , , , , , , ,
error: Copy is disabled