| Pipe Size | T | U | V | Approx. Weight (lb) | ||
|---|---|---|---|---|---|---|
| 90° | LR 90° | Tee | ||||
| 3 | 4.88 | 5.00 | 0.50 | 38 | 41 | 47 |
| 4 | 5.50 | 6.00 | 0.50 | 50 | 60 | 75 |
| 6 | 7.00 | 7.00 | 0.62 | 85 | 100 | 115 |
| 8 | 8.38 | 9.00 | 0.88 | 145 | 180 | 195 |
| 10 | 9.75 | 9.00 | 0.88 | 210 | 315 | 315 |
| 12 | 11.25 | 11.00 | 1.00 | 300 | 430 | 450 |
| 14 | 12.50 | 11.00 | 1.00 | 400 | 580 | 570 |
| 16 | 13.75 | 11.00 | 1.00 | 505 | 740 | 710 |
| 18 | 15.00 | 13.50 | 1.12 | 645 | – | 900 |
| 20 | 16.00 | 13.50 | 1.12 | 805 | – | 1125 |
| 24 | 18.50 | 13.50 | 1.12 | 1215 | – | 1930 |
| 30 | 23.00 | 16.00 | 1.15 | 1945 | – | – |
| 36 | 26.00 | 16.00 | 1.15 | 2395 | 2895 | – |
| Pipe Size | T | U | V | Approx. Weight (lb) |
|---|---|---|---|---|
| 4 x 3 | 5.50 | 6 | 0.50 | 45 |
| 6 x 4 | 7.00 | 7 | 0.62 | 75 |
| 8 x 4 | 8.38 | 9 | 0.88 | 120 |
| 8 x 6 | 8.38 | 9 | 0.88 | 135 |
| 10 x 6 | 9.75 | 9 | 0.88 | 175 |
| 10 x 8 | 9.75 | 9 | 0.88 | 185 |
| 12 x 6 | 11.25 | 11 | 1.00 | 230 |
| 12 x 8 | 11.25 | 11 | 1.00 | 255 |
| 12 x 10 | 11.25 | 11 | 1.00 | 285 |
| Base Bolt Drilling | |||
|---|---|---|---|
| Pipe Size | Bolt Circle | Bolt Hole Dia. | No. of Bolt Holes |
| 3 | 3.88 | 5/8 | 4 |
| 4 | 4.75 | 3/4 | 4 |
| 6 | 5.50 | 3/4 | 4 |
| 8 | 7.50 | 3/4 | 4 |
| 10 | 7.50 | 3/4 | 4 |
| 12 | 9.50 | 7/8 | 4 |
| 14 | 9.50 | 7/8 | 4 |
| 16 | 9.50 | 7/8 | 4 |
| 18 | 11.75 | 7/8 | 4 |
| 20 | 11.75 | 7/8 | 4 |
| 24 | 11.75 | 7/8 | 4 |
| 30 | 14.25 | 1 | 4 |
| 36 | 17.00 | 1 | 4 |
| 42 | 21.25 | 1 1/4 | 4 |
| 48 | 22.75 | 1 1/4 | 4 |
- * Flanged fitting base for bends are not included in AWWA C110/A21.10
- For flange dimensions see Flange – ANSI Class 125, C110, DI
- These fittings are not included in ANSI/AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)