Feb 9, 2018

UNS – Unified Special 60°

Nominal Dia.	Major Dia.	Major Dia.	Tapping Drill Size	TPI	Pitch
#0-80	0.060	3/64	.046875	80	0.317
#1-72	0.073	#53	.0595	72	0.353
#2-64	0.086	#50	.07	64	0.397
#3-56	0.099	#45	.082	56	0.453
#4-48	0.112	#42	.0935	48	0.529
#5-44	0.125	#37	.104	44	0.577
#6-40	0.138	#33	.113	40	0.635
#8-36	0.164	#29	.136	36	0.705
#10-32	0.190	#21	.159	32	0.794
#12-28	0.216	#15	.18	28	0.907
1/4”-28	0.250	#3	.213	28	0.907
5/16”-24	0.313	I	.272	24	1.058
3/8”-24	0.375	Q	.332	24	1.058
7/16”-20	0.438	25/64	.390625	20	1.270
1/2”-20	0.500	29/64	.453125	20	1.270
9/16”-18	0.563	33/64	.515625	18	1.411
5/8”-18	0.625	37/64	.5625	18	1.411
3/4”-16	0.750	11/16	.6875	16	1.587
7/8”-14	0.875	13/16	.8125	14	1.814
1”-12	1.000	15/16	.90625	12	2.117
1-1/8”-12	1.125	1-3/64	1.046875	12	2.117
1-1/4”-12	1.250	1-11/64	1.171875	12	2.117
1-3/8”-12	1.375	1-19/64	1.296875	12	2.117
1-1/2”-12	1.500	1-27/64	1.421875	12	2.117

by PipeAdmin
Tags: 60 degree, inch, Unified Special, UNS

Feb 9, 2018

UNR – Unified Thread Root 60°

Nominal Diameter	Major Diameter Inch	Major Diameter mm	Tapping Drill Size mm	TPI	Pitch mm
10 - 28 UNS	0.1900	4.826	3.95	28	0.907
10 - 36 UNS	0.1900	4.826	4.15	36	0.706
10 - 40 UNS	0.1900	4.826	4.20	40	0.635
10 - 48 UNS	0.1900	4.826	4.35	48	0.529
10 - 56 UNS	0.1900	4.826	4.39	56	0.454
12 - 36 UNS	0.2160	5.486	4.80	36	0.706
12 - 40 UNS	0.2160	5.486	4.90	40	0.635
12 - 48 UNS	0.2160	5.486	4.98	48	0.529
12 - 56 UNS	0.2160	5.486	5.05	56	0.454
1/4" - 24 UNS	0.2500	6.350	5.35	24	1.058
1/4" - 27 UNS	0.2500	6.350	5.45	27	0.941
1/4" - 36 UNS	0.2500	6.350	5.70	36	0.706
1/4" - 40 UNS	0.2500	6.350	5.75	40	0.635
1/4" - 48 UNS	0.2500	6.350	5.85	48	0.529
1/4" - 56 UNS	0.2500	6.350	5.95	56	0.454
5/16" - 27 UNS	0.3125	7.938	7.10	27	0.941
5/16" - 36 UNS	0.3125	7.938	7.25	36	0.706
5/16" - 40 UNS	0.3125	7.938	7.40	40	0.635
5/16" - 48 UNS	0.3125	7.938	7.50	48	0.529
3/8" - 18 UNS	0.3750	9.525	8.20	18	1.411
3/8" - 27 UNS	0.3750	9.525	8.70	27	0.941
3/8" - 36 UNS	0.3750	9.525	8.90	36	0.706
3/8" - 40 UNS	0.3750	9.525	9.00	40	0.635
0,390" - 27 UNS	0.3900	9.906	9.00	27	0.941
7/16" - 18 UNS	0.4375	11.112	9.75	18	1.411
7/16" - 24 UNS	0.4375	11.112	10.10	24	1.058
7/16" - 27 UNS	0.4375	11.112	10.20	27	0.941
1/2" - 12 UNS	0.5000	12.700	10.75	12	2.117
1/2" - 14 UNS	0.5000	12.700	11.00	14	1.814
1/2" - 18 UNS	0.5000	12.700	11.40	18	1.411
1/2" - 24 UNS	0.5000	12.700	11.70	24	1.058
1/2" - 27 UNS	0.5000	12.700	11.85	27	0.941
9/16" - 14 UNS	0.5625	14.288	12.60	14	1.814
9/16" - 27 UNS	0.5625	14.288	13.40	27	0.941
5/8" - 14 UNS	0.6250	15.875	14.20	14	1.814
5/8" - 27 UNS	0.6250	15.875	15.00	27	0.941
3/4" - 14 UNS	0.7500	19.050	17.40	14	1.814
3/4" - 18 UNS	0.7500	19.050	17.75	18	1.411
3/4" - 24 UNS	0.7500	19.050	18.10	24	1.058
3/4" - 27 UNS	0.7500	19.050	18.20	27	0.941
7/8" - 10 UNS	0.8750	22.225	19.75	10	2.540
7/8" - 18 UNS	0.8750	22.225	21.00	18	1.411
7/8" - 24 UNS	0.8750	22.225	21.20	24	1.058
7/8" - 27 UNS	0.8750	22.225	21.40	27	0.941
1" - 10 UNS	1.0000	25.400	23.00	10	2.540
1" - 14 UNS	1.0000	25.400	23.75	14	1.814
1" - 18 UNS	1.0000	25.400	24.25	18	1.411
1" - 24 UNS	1.0000	25.400	24.50	24	1.058
1" - 27 UNS	1.0000	25.400	24.50	27	0.941
1 1/8" - 10 UNS	1.1250	28.575	26.25	10	2.540
1 1/8" - 14 UNS	1.1250	28.575	27.00	14	1.814
1 1/8" - 24 UNS	1.1250	28.575	27.75	24	1.058
1 1/4" - 10 UNS	1.2500	31.750	29.50	10	2.540
1 1/4" - 14 UNS	1.2500	31.750	30.00	14	1.814
1 1/4" - 24 UNS	1.2500	31.750	30.75	24	1.058
1 3/8" - 10 UNS	1.3750	34.925	32.60	10	2.540
1 3/8" - 14 UNS	1.3750	34.925	33.30	14	1.814
1 1/2" - 10 UNS	1.5000	38.100	35.70	10	2.540
1 1/2" - 14 UNS	1.5000	38.100	36.50	14	1.814
1 1/2" - 24 UNS	1.5000	38.100	37.30	24	1.058
1 5/8" - 10 UNS	1.6250	41.275	39.00	10	2.540
1 5/8" - 14 UNS	1.6250	41.275	39.50	14	1.814
1 5/8" - 24 UNS	1.6250	41.275	40.35	24	1.058
1 3/4" - 10 UNS	1.7500	44.450	42.00	10	2.540
1 3/4" - 14 UNS	1.7500	44.450	42.85	14	1.814
1 3/4" - 18 UNS	1.7500	44.450	43.25	18	1.411
1 7/8" - 10 UNS	1.8750	47.625	45.30	10	2.540
1 7/8" - 14 UNS	1.8750	47.625	46.00	14	1.814
1 7/8" - 18 UNS	1.8750	47.625	46.35	18	1.411
2" - 10 UNS	2.0000	50.800	48.40	10	2.540
2" - 14 UNS	2.0000	50.800	49.25	14	1.814
2" - 18 UNS	2.0000	50.800	49.50	18	1.411
2 1/16" - 16 UNS	2.0625	52.387	51.00	16	1.587
2 3/16" - 16 UNS	2.1875	55.563	54.10	16	1.587
2 1/4" - 10 UNS	2.2500	57.150	54.75	10	2.540
2 1/4" - 14 UNS	2.2500	57.150	55.50	14	1.814
2 1/4" - 18 UNS	2.2500	57.150	55.75	18	1.411
2 5/16" - 16 UNS	2.3125	58.737	57.30	16	1.587
2 7/16" - 16 UNS	2.4375	61.912	60.50	16	1.587
2 1/2" - 10 UNS	2.5000	63.500	61.20	10	2.540
2 1/2" - 14 UNS	2.5000	63.500	61.75	14	1.814
2 1/2" - 18 UNS	2.5000	63.500	62.30	18	1.411
2 3/4" - 10 UNS	2.7500	69.850	67.50	10	2.540
2 3/4" - 14 UNS	2.7500	69.850	68.25	14	1.814
2 3/4" - 18 UNS	2.7500	69.850	68.50	18	1.411
3" - 10 UNS	3.0000	76.200	73.80	10	2.540
3" - 14 UNS	3.0000	76.200	74.50	14	1.814
3" - 18 UNS	3.0000	76.200	75.00	18	1.411
3 1/4" - 10 UNS	3.2500	82.550	80.25	10	2.540
3 1/4" - 14 UNS	3.2500	82.550	81.00	14	1.814
3 1/4" - 18 UNS	3.2500	82.550	81.25	18	1.411
3 1/2" - 10 UNS	3.5000	88.900	86.55	10	2.540
3 1/2" - 14 UNS	3.5000	88.900	87.25	14	1.814
3 1/2" - 18 UNS	3.5000	88.900	87.60	18	1.411
3 3/4" - 10 UNS	3.7500	95.250	93.00	10	2.540
3 3/4" - 14 UNS	3.7500	95.250	93.60	14	1.814
3 3/4" - 18 UNS	3.7500	95.250	94.00	18	1.411
4" - 10 UNS	4.0000	101.600	99.30	10	2.540
4" - 14 UNS	4.0000	101.600	100.00	14	1.814
4 1/4" - 10 UNS	3.2500	107.950	105.60	10	2.540
4 1/4" - 14 UNS	4.2500	107.950	106.30	14	1.814
4 1/2" - 10 UNS	4.5000	114.300	112.00	10	2.540
4 1/2" - 14 UNS	4.5000	114.300	112.65	14	1.814
4 3/4" - 10 UNS	4.7500	120.650	118.35	10	2.540
4 3/4" - 14 UNS	4.7500	120.650	119.00	14	1.814
5" - 10 UNS	5.0000	127.000	124.70	10	2.540
5" - 14 UNS	5.0000	127.000	125.35	14	1.814
5 1/4" - 10 UNS	5.2500	133.350	131.00	10	2.540
5 1/4" - 14 UNS	5.2500	133.350	131.70	14	1.814
5 1/2" - 10 UNS	5.5000	139.700	137.40	10	2.540
5 1/2" - 14 UNS	5.5000	139.700	138.00	14	1.814
5 3/4" - 10 UNS	5.7500	146.050	143.75	10	2.540
5 3/4" - 14 UNS	5.7500	146.050	144.40	14	1.814
6" - 10 UNS	6.0000	152.400	150.00	10	2.540
6" - 14 UNS	6.0000	152.400	150.75	14	1.814

by PipeAdmin
Tags: 60 degree, Metric, Unified Thread Root, UNR

Feb 9, 2018

UNEF – Unified Extra Fine 60° (mm)

British Standard Whitworth Coarse Thread Series (parallel, cylindrical) In GB most common Thread. Corresponds to the Metric Thread in its type of use.

UNEF – 8 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
1-1/16”	8	3.175	24.00
1-1/8”	8	3.175	25.50
1-3/16”	8	3.175	27.20
1-1/4”	8	3.175	28.80
1-5/16”	8	3.175	30.30
1-3/8”	8	3.175	31.90
1-7/16”	8	3.175	33.50
1-1/2”	8	3.175	35.10
1-9/16”	8	3.175	36.70
1-5/8”	8	3.175	38.30
1-11/16”	8	3.175	39.90
1-3/4”	8	3.175	41.40
1-13/16”	8	3.175	43.00
1-7/8”	8	3.175	44.60
1-15/16”	8	3.175	46.20
2”	8	3.175	47.80
2-1/8”	8	3.175	51.00
2-1/4”	8	3.175	54.10
2-3/8”	8	3.175	57.30
2-1/2”	8	3.175	60.50
2-5/8”	8	3.175	64.70
2-3/4”	8	3.175	66.80
2-7/8”	8	3.175	70.00
3”	8	3.175	73.20
3-1/8”	8	3.175	76.40
3-1/4”	8	3.175	79.50
3-3/8”	8	3.175	82.70
3-1/2”	8	3.175	85.90
3-5/8”	8	3.175	89.00
3-3/4”	8	3.175	92.30
3-7/8”	8	3.175	95.40
4”	8	3.175	98.60
UNEF – 12 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
5/8”	12	2.117	13.90
11/16”	12	2.117	15.50
3/4”	12	2.117	17.00
13/16”	12	2.117	18.60
7/8”	12	2.117	20.20
15/16”	12	2.117	21.80
1-1/16”	12	2.117	25.00
1-3/16”	12	2.117	28.20
1-5/16”	12	2.117	31.30
1-7/16”	12	2.117	34.50
1-9/16”	12	2.117	37.70
1-5/8”	12	2.117	39.30
1-11/16”	12	2.117	40.85
1-3/4”	12	2.117	42.40
1-13/16”	12	2.117	44.00
1-7/8”	12	2.117	45.60
1-15/16”	12	2.117	47.20
2”	12	2.117	48.80
2-1/8”	12	2.117	52.00
2-1/4”	12	2.117	55.10
2-3/8”	12	2.117	58.30
2-1/2”	12	2.117	61.50
2-5/8”	12	2.117	64.70
2-3/4”	12	2.117	67.80
2-7/8”	12	2.117	71.00
3”	12	2.117	74.20
3-1/8”	12	2.117	77.40
3-1/4”	12	2.117	80.50
3-3/8”	12	2.117	83.70
3-1/2”	12	2.117	86.90
3-5/8”	12	2.117	90.10
3-3/4”	12	2.117	93.25
3-7/8”	12	2.117	96.40
4”	12	2.117	99.60
4-1/8”	12	2.117	102.80
4-1/4”	12	2.117	105.90
4-3/8”	12	2.117	109.10
4-1/2”	12	2.117	112.30
4-5/8”	12	2.117	115.50
4-3/4”	12	2.117	118.70
4-7/8”	12	2.117	121.70
5”	12	2.117	125.00
5-1/8”	12	2.117	128.20
5-1/4”	12	2.117	131.40
5-3/8”	12	2.117	134.50
5-1/2”	12	2.117	137.70
5-5/8”	12	2.117	140.90
5-3/4”	12	2.117	144.00
6”	12	2.117	150.40
UNEF – 16 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
7/16”	16	1.587	9.58
1/2”	16	1.587	11.20
9/16”	16	1.587	12.80
5/8”	16	1.587	14.40
11/16”	16	1.587	16.00
13/16”	16	1.587	19.10
7/8”	16	1.587	20.70
15/16”	16	1.587	22.30
1”	16	1.587	23.90
1-1/16”	16	1.587	25.50
1-1/8”	16	1.587	27.10
1-3/16”	16	1.587	28.70
1-1/4”	16	1.587	30.30
1-5/16”	16	1.587	31.75
1-3/8”	16	1.587	33.40
1-7/16”	16	1.587	35.00
1-1/2”	16	1.587	36.60
1-9/16”	16	1.587	38.20
1-5/8”	16	1.587	39.80
1-11/16”	16	1.587	41.35
1-3/4”	16	1.587	43.00
1-13/16”	16	1.587	44.50
1-7/8”	16	1.587	46.10
1-15/16”	16	1.587	47.70
2”	16	1.587	49.30
2-1/8”	16	1.587	52.60
2-1/4”	16	1.587	55.65
2-3/8”	16	1.587	58.85
2-1/2”	16	1.587	62.00
2-5/8”	16	1.587	65.15
2-3/4”	16	1.587	68.35
2-7/8”	16	1.587	71.50
3”	16	1.587	74.70
3-1/8”	16	1.587	77.85
3-1/4”	16	1.587	81.00
3-3/8”	16	1.587	84.20
3-1/2”	16	1.587	87.40
3-5/8”	16	1.587	90.55
3-3/4”	16	1.587	93.75
3-7/8”	16	1.587	96.90
4”	16	1.587	100.10
4-1/8”	16	1.587	103.30
4-1/4”	16	1.587	106.45
4-3/8”	16	1.587	109.60
4-1/2”	16	1.587	112.80
4-5/8”	16	1.587	116.00
4-3/4”	16	1.587	119.15
4-7/8”	16	1.587	122.30
5”	16	1.587	125.50
5-1/4”	16	1.587	131.85
5-1/2”	16	1.587	138.20
5-5/8”	16	1.587	141.35
5-7/8”	16	1.587	147.75
6”	16	1.587	150.90
UNEF – 18 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
1-1/16”	18	1.411	25.80
1-1/8”	18	1.411	27.35
1-1/4”	18	1.411	30.55
1-5/16”	18	1.411	32.10
1-3/8”	18	1.411	33.70
1-7/16”	18	1.411	35.30
1-1/2”	18	1.411	36.90
1-9/16”	18	1.411	38.55
1-5/8”	18	1.411	40.10
1-11/16”	18	1.411	41.60
UNEF – 20 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
5/16”	20	1.27	6.70
3/8”	20	1.27	8.30
9/16”	20	1.27	13.10
5/8”	20	1.27	14.67
11/16”	20	1.27	16.25
1-1/16”	20	1.27	25.80
1-1/8”	20	1.27	27.37
1-3/16”	20	1.27	28.97
1-1/4”	20	1.27	30.55
1-5/16”	20	1.27	32.15
1-3/8”	20	1.27	33.70
1-7/16”	20	1.27	35.32
1-1/2”	20	1.27	36.89
1-9/16”	20	1.27	38.49
1-5/8”	20	1.27	40.08
1-11/16”	20	1.27	41.68
1-3/4”	20	1.27	43.25
1-13/16”	20	1.27	44.84
1-7/8”	20	1.27	46.42
1-15/16”	20	1.27	48.00
2”	20	1.27	49.58
2-1/8”	20	1.27	52.78
2-1/4”	20	1.27	56.03
2-3/8”	20	1.27	59.12
2-1/2”	20	1.27	62.30
2-5/8”	20	1.27	65.47
2-3/4”	20	1.27	68.67
2-7/8”	20	1.27	71.82
3”	20	1.27	75.00
3/4”	20	1.27	18.00
13/16”	20	1.27	19.60
7/8”	20	1.27	21.15
15/16”	20	1.27	22.70
1”	20	1.27	24.30
UNEF – 24 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
9/16”	24	1.058	13.40
5/8”	24	1.058	15.00
11/16”	24	1.058	16.60
UNEF – 28Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
7/16”	28	0.907	10.35
1/2”	28	0.907	11.80
UNEF – 32 Threads Per Inch
Nominal Dia.	TPI	Pitch	Tap Size
N 12	32	0.794	4.80
1/4”	32	0.794	5.70
5/16”	32	0.794	7.25
3/8”	32	0.794	8.85

by PipeAdmin
Tags: 60 degree, Metric, UNEF, Unified Extra Fine thread

Feb 9, 2018

UNC – Unified Coarse 60° (mm)

Nominal Dia.	Major Dia.	Major Dia.	Tapping Drill Size	TPI	Pitch
#1-64	1.854	#53	1.5	64	0.397
#2-56	2.184	#50	1.78	56	0.453
#3-48	2.515	#47	2.05	48	0.529
#4-40	2.845	#43	2.27	40	0.635
#5-40	3.175	#38	2.59	40	0.635
#6-32	3.505	#36	2.77	32	0.794
#8-32	4.166	#29	3.42	32	0.794
#10-24	4.826	#25	3.82	24	1.058
#12-24	5.486	#17	4.47	24	1.058
1/4”-20	6.35	#7	5.11	20	1.27
5/16”-18	7.938	F	6.55	18	1.411
3/8”-16	9.525	5/16	7.95	16	1.587
1/2”-13	12.7	27/64	10.73	13	1.954
9/16”-12	14.288	31/64	12.15	12	2.117
5/8”-11	15.875	17/32	13.53	11	2.309
3/4”-10	19.05	41/64	16.46	10	2.54
7/8”-9	22.225	49/64	19.34	9	2.822
1”-8	25.4	7/8	22.15	8	3.175
1-1/8”-7	28.575	63/64	24.87	7	3.628
1-1/4”-7	31.75	1-7/64	28.05	7	3.628
1-1/2”-6	38.1	1-11/32	33.7	6	4.233
1-3/4”-5	44.45	1-35/64	39.26	5	5.08
2”-4.5	50.8	1-25/32	45.03	4.5	5.644
2-1/4”-4.5	57.15	2-1/32	51.38	4.5	5.644
2-1/2”-4	63.5	2-1/4	57	4	6.35
2-3/4”-4	69.85	2-1/2	63.36	4	6.35
3”-4	76.2	2-3/4	69.71	4	6.35
3-1/4”-4	82.55	3	76.06	4	6.35
3-1/2”-4	88.9	3-1/4	82.41	4	6.35
3-3/4”-4	95.25	3-1/2	88.76	4	6.35
4”-4	101.6	3-3/4	95.11	4	6.35

by PipeAdmin
Tags: 60 degree, Metric, UNC, Unified Coarse thread

Feb 9, 2018

UNC – Unified Coarse 60° (inch)

Nominal Dia.	Major Dia.	Major Dia.	Tapping Drill Size	TPI	Pitch
#1-64	0.073	#53	0.0595	64	0.397
#2-56	0.086	#50	0.07	56	0.453
#3-48	0.099	#47	0.0785	48	0.529
#4-40	0.112	#43	0.089	40	0.635
#5-40	0.125	#38	0.1015	40	0.635
#6-32	0.138	#36	0.1065	32	0.794
#8-32	0.164	#29	0.136	32	0.794
#10-24	0.19	#25	0.1495	24	1.058
#12-24	0.216	#17	0.173	24	1.058
1/4”-20	0.25	#7	0.201	20	1.27
5/16”-18	0.313	F	0.257	18	1.411
3/8”-16	0.375	5/16	0.3125	16	1.587
1/2”-13	0.5	27/64	0.421875	13	1.954
9/16”-12	0.563	31/64	0.484375	12	2.117
5/8”-11	0.625	17/32	0.53125	11	2.309
3/4”-10	0.75	41/64	0.640625	10	2.54
7/8”-9	0.875	49/64	0.765625	9	2.822
1”-8	1	7/8	0.875	8	3.175
1-1/8”-7	1.125	63/64	0.984375	7	3.628
1-1/4”-7	1.25	1-7/64	1.109375	7	3.628
1-1/2”-6	1.5	1-11/32	1.34375	6	4.233
1-3/4”-5	1.75	1-35/64	1.546875	5	5.08
2”-4.5	2	1-25/32	1.78125	4.5	5.644
2-1/4”-4.5	2.25	2-1/32	2.03125	4.5	5.644
2-1/2”-4	2.5	2-1/4	2.25	4	6.35
2-3/4”-4	2.75	2-1/2	2.5	4	6.35
3”-4	3	2-3/4	2.75	4	6.35
3-1/4”-4	3.25	3	3	4	6.35
3-1/2”-4	3.5	3-1/4	3.25	4	6.35
3-3/4”-4	3.75	3-1/2	3.5	4	6.35
4”-4	4	3-3/4	3.75	4	6.35

by PipeAdmin
Tags: 60 degree, inch, UNC, Unified Coarse thread

Feb 9, 2018

Metals and Alloys – Densities

The density of some common metals and alloys are indicated in the table below:

Metal or Alloy	Density – ρ –
Metal or Alloy	(kg/m3)	(lb/ft3)
Actinium	10070	629
Admiralty Brass	8525	532
Aluminum	2712	169
Aluminum – melted	2560 – 2640	160 – 165
Aluminum – 1100	2720	170
Aluminum – 6061	2720	170
Aluminum – 7050	2800	175
Aluminum – 7178	2830	177
Aluminum bronze (3-10% Al)	7700 – 8700	481 – 543
Aluminum foil	2700 -2750	169
Antifriction metal	9130 -10600	570
Antimony	6690	418
Babbitt	7272	454
Barium	3594	224
Beryllium	1840	115
Beryllium copper	8100 – 8250	506 – 515
Bismuth	9750	609
Brass – casting	8400 – 8700	524 – 543
Brass – rolled and drawn	8430 – 8730	526 – 545
Brass 60/40	8520	532
Bronze – lead	7700 – 8700	481 – 543
Bronze – phosphorous	8780 – 8920	548 – 557
Bronze (8-14% Sn)	7400 – 8900	462 – 556
Brushed metal	7860	491
Cadmium	8640	539
Caesium	1873	117
Calcium	1540	96.1
Cast iron	6800 – 7800	425 – 487
Cerium	6770	423
Chemical Lead	11340	708
Chromium	7190	449
Cobalt	8746	546
Constantan	8920	557
Columbium	8600	537
Constantan	8880	554
Copper	8940	558
Cupronickel	8908 – 8940	556 – 558
Delta metal	8600	537
Duralumin	2790	174
Electrum	8400 – 8900	524 – 556
Eroded metal	7860	491
Europium	5243	327
Gallium	5907	369
Germanium	5323	332
Gold	19320	1206
Hafnium	13310	831
Hatelloy	9245	577
Indium	7310	456
Inconel	8497	530
Incoloy	8027	501
Iridium	22650	1414
Iron	7850	490
Lanthanum	6145	384
Lead	11340	708
Light alloy based on Al	2560 – 2800	160 – 175
Light alloy based on Mg	1760 – 1870	110 – 117
Lithium	534	33.3
Magnesium	1738	109
Manganese	7440	464
Manganese Bronze	8359	522
Manganin	8500	531
Mercury	13593	849
Molybdenum	10188	636
Monel	8360 – 8840	522 – 552
Neodymium	7007	437
Nichrome	8400	524
Nickel	8908	556
Nickel 20	8090	505
Nickel 200	8890	555
Nickel silver	8400 – 8900	524 – 556
Nickeline	8770	548
Nimonic	8100	506
Niobium	8570	535
Osmium	22610	1412
Palladium	12160	759
Phosphor bronze	8900	556
Platinum	21400	1336
Plutonium	19816	1237
Red Brass	8746	546
Silver	10490	655
Sodium	971	60.6
Solder 50/50 Pb Sn	8885	555
Stainless Steel	7480 – 8000	467 – 499
Steel	7850	490
Tin	7280	454
Titanium	4500	281
Tungsten	19600	1224
Uranium	18900	1180
Vanadium	5494	343
White metal	7100	443
Wrought Iron	7750	484
Zinc	7135	445
Zirconium	6570	410
Yellow Brass	8470	529

by PipeAdmin
Tags: DIN, Fine Thread, ISO, Metric

Feb 8, 2018

Standards – Welding

ASME BPVC Section I	Rules for Construction of Power Boilers
ASME BPVC Section II	Part C: Specifications for Welding Rods, Electrodes, and Filler Metals.
ASME BPVC Section V	Nondestructive Examination
ASME BPVC Section IX	Welding and Brazing Qualifications
ASME B16.25	Buttwelding ends
ASME B31.1	Power Piping
ASME B31.3	Process Piping
AWS A2.4	Standard symbols for welding, brazing, and non-destructive examination
AWS A3.0	Standard welding terms and definitions
AWS A5.1	Specification for carbon steel electrodes for shielded metal arc welding
AWS A5.18	Specification for carbon steel electrodes and rods for gas shielded arc welding
AWS B1.10	Guide for the nondestructive examination of welds
AWS B2.1	Specification for Welding Procedure and Performance Qualification
AWS D1.1	Structural welding (steel)
AWS D1.2	Structural welding (aluminum)
AWS D1.3	Structural welding (sheet steel)
AWS D1.4	Structural welding (reinforcing steel)
AWS D1.5	Bridge welding
AWS D1.6	Structural welding (stainless steel)
AWS D1.7	Structural welding (strengthening and repair)
AWS D1.8	Structural welding seismic supplement
AWS D1.9	Structural welding (titanium)
AWS D8.1	Automotive spot welding
AWS D8.6	Automotive spot welding electrodes supplement
AWS D8.7	Automotive spot welding recommendations supplement
AWS D8.8	Automotive arc welding (steel)
AWS D8.9	Automotive spot weld testing
AWS D8.14	Automotive arc welding (aluminum)
AWS D9.1	Sheet metal welding
AWS D10.10	Heating practices for pipe and tube
AWS D10.11	Root pass welding for pipe
AWS D10.12	Pipe welding (mild steel)
AWS D10.13	Tube brazing (copper)
AWS D10.18	Pipe welding (stainless steel)
AWS D11.2	Welding (cast iron)
AWS D14.1	Industrial mill crane welding
AWS D14.3	Earthmoving & agricultural equipment welding
AWS D14.4	Machinery joint welding
AWS D14.5	Press welding
AWS D14.6	Industrial mill roll surfacing
AWS D15.1	Railroad welding
AWS D15.2	Railroad welding practice supplement
AWS D16.1	Robotic arc welding safety
AWS D16.2	Robotic arc welding system installation
AWS D16.3	Robotic arc welding risk assessment
AWS D16.4	Robotic arc welder operator qualification
AWS D17.1	Aerospace fusion welding
AWS D17.2	Aerospace resistance welding
AWS D18.1	Hygienic tube welding (stainless steel)
AWS D18.2	Stainless steel tube discoloration guide
AWS D18.3	Hygienic equipment welding
API RP 577	Welding Inspection and Metallurgy
API 1104	Welding of pipelines and related facilities
AS NZS 1554.1	Structural steel welding – Welding of steel structures
AS NZS 1554.2	Structural steel welding – Stud welding (steel studs to steel)
AS NZS 1554.3	Structural steel welding – Welding of reinforcing steel
AS NZS 1554.4	Structural steel welding – Welding of high strength quenched and tempered steels
AS NZS 1554.5	Structural steel welding – Welding of steel structures subject to high levels of fatigue loading
AS NZS 1554.6	Structural steel welding – Welding stainless steels for structural purposes
AS NZS 1554.7	Structural steel welding – Welding of sheet steel structures
AS NZS 3992	Pressure equipment – Welding and brazing qualification
AS NZS 4855	Welding consumables – Covered electrodes for manual metal arc welding
CAN/CSA-G401-14	Corrugated steel pipe products
CAN/CSA-ISO 14341:11 (R2016)	Welding consumables – Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels – Classification
CAN/CSA-W117.2-12	Safety in welding, cutting, and allied processes
G40.20-13/G40.21-13	General requirements for rolled or welded structural quality steel/ Structural quality steel
W178.1-14	Certification of welding inspection organizations
W178.2-14	Certification of welding inspectors
W47.1-09 (R2014)	Certification of companies for fusion welding of steel
W47.2-11 (R2015)	Certification of companies for fusion welding of aluminum
W48-14	Filler metals and allied materials for metal arc welding
W55.3-08 (R2013)	Certification of companies for resistance welding of steel and aluminum
W59-13	Welded steel construction (metal arc welding)
W59.2-M1991 (R2013)	Welded Aluminum Construction
CAN/CSA-Z662-15	Oil and gas pipeline systems
BS 499-1	Welding terms and symbols. Glossary for welding, brazing and thermal cutting
BS 499-2C	Welding terms and symbols. European arc welding symbols in chart form
BS 2633	Specification for Class I arc welding of ferritic steel pipework for carrying fluids
BS 2971	Specification for class II arc welding of carbon steel pipework for carrying fluids
BS 4515-1	Specification for welding of steel pipelines on land and offshore – Part 1: Carbon and carbon manganese steel pipelines
BS 4515-2	Specification for welding of steel pipelines on land and offshore. Duplex stainless steel pipelines
PD 6705-2	Structural use of steel and aluminium. Recommendations for the execution of steel bridges to BS EN 1090-2
PD 6705-3	Structural use of steel and aluminium. Recommendations for the execution of aluminium structures to BS EN 1090-3
ISO 2553	Welded, brazed and soldered joints – symbolic representation on drawings (1992)
ISO 2560	Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
ISO 3580	Covered electrodes for manual arc welding of creep-resisting steels – Code of symbols for identification
ISO 3581	Covered electrodes for manual arc welding of stainless and other similar high alloy steels – Code of symbols for identification
ISO 3834	Quality requirements for fusion welding of metallic materials, five parts.
ISO 4063	Welding and allied processes – Nomenclature of processes and reference numbers
ISO 5817	Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
ISO 6520-1	Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
ISO 6520-2	Welding and allied processes Classification of geometric imperfections in metallic materials Part 2: Welding with pressure
ISO 6947	Welds. Working positions. Definitions of angles of slope and rotation
ISO 9606	Qualification test of welders Fusion welding, parts 1 to 5
ISO 9692-1	Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
ISO 9692-2	Welding and allied processes. Joint preparation. Submerged arc welding of steels
ISO 9692-3	Welding and allied processes. Joint preparation. Part 3: TIG and MIG welding of aluminium and its alloys
ISO 13847	Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines
ISO 13916	Welding – Guidance on the measurement of preheating temperature, interpass temperature and preheat mainteanance temperature
ISO 13918	Welding – Studs and ceramic ferrules for arc stud welding
ISO 13919-1	Welding – Electron and laser-beam welded joints – Guidance on quality level for imperfections – Part 1: Steel
ISO 13919-2	Welding – Electron and laser-beam welded joints – Guidance on quality level for imperfections – Part 2: Aluminium and its weldable alloys
ISO 13920	Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position
ISO 14112	Gas welding equipment – Small kits for gas brazing and welding
ISO 14175	Welding consumables Gases and gas mixtures for fusion welding and allied processes. Replaced EN 439:1994 in Europe.
ISO 14341	Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
ISO 14554	Resistance welding
ISO 14744	Electron beam welding, six parts
ISO 15607	Specification and qualification of welding procedures for metallic materials – General rules
ISO/TR 15608	Welding – Guidelines for a metallic material grouping system
ISO 15609	Specification and qualification of welding procedures for metallic materials – Welding procedure specification, five parts.
ISO 15610	Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables
ISO 15611	Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience
ISO 15612	Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
ISO 15613	Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
ISO 15614	Specification and qualification of welding procedures for metallic materials – Welding procedure test, 13 parts.
ISO 15615	Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices
ISO 15618-1	Qualification testing of welders for under-water welding. Diver-welders for hyperbaric wet welding
ISO 15618-2	Qualification testing of welders for under-water welding. Diver-welders and welding operators for hyperbaric dry welding
ISO 17635	Non-destructive testing of welds. General rules for metallic materials
ISO/TR 20172	Welding Grouping systems for materials European materials
ISO/TR 20173	Welding Grouping systems for materials American materials
ISO/TR 20174	Welding Grouping systems for materials Japanese materials
ISO 24394	Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
EN 287-1	Qualification test of welders Fusion welding Part 1: Steels. Withdrawn and replaced by EN ISO 9606-1 [9] [10]
EN 1090-1	Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
EN 1090-2	Execution of steel structures and aluminium structures – Part 2: Technical requirements for steel structures
EN 1090-3	Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures
EN 1011-1	Welding Recommendations for welding of metallic materials Part 1: General guidance for arc welding
EN 1011-2	Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels
EN 1011-3	Welding Recommendations for welding of metallic materials Part 3: Arc welding of stainless steels
EN 1011-4	Welding – Recommendations for welding of metallic materials – Part 4: Arc welding of aluminium and aluminium alloys
EN 1011-5	Welding. Recommendations for welding of metallic materials. Welding of clad steel
EN 1011-6	Welding. Recommendations for welding of metallic materials. Laser beam welding
EN 1011-7	Welding – Recommendations for welding of metallic materials – Part 7: Electron beam welding
EN 1011-8	Welding. Recommendations for welding of metallic materials. Welding of cast irons
EN 1418	Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 1708-1	Welding. Basic welded joint details in steel. Pressurized components.
EN 1708-2	Welding. Basic weld joint details in steel. Non-internal pressurized components.
EN 1708-3	Welding. Basic weld joint details in steel. Clad, buttered and lined pressurized components.
EN 1993-1-8	Eurocode 3: Design of steel structures Part 1-8: General Design of joints
EN 13133	Brazing – Brazer approval
EN 22553	Welded, brazed and soldered joints Symbolic representation on drawings. (CEN version of ISO 2553)
DIN 1910-100	Welding; terms dependent on materials for metal welding
SEW 088	“Schweigeeignete Feinkornbausthle – Richtlinien fr die Verarbeitung besonders fr das Schmelzschweien Stahlinstitut VDEh Merkblatt DVS 0916,Metall-Schutzgasschwien von Feinkornbausthlen, Deutscher Verband fr Schweitechnik e.V.”

by PipeAdmin
Tags: acronyms, electrical, Electrician

Feb 8, 2018

Standards – IEC

IEC 60028	International standard of resistance for copper
IEC 60034	Rotating electrical machinery
IEC 60038	IEC Standard Voltages
IEC 60041	Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
IEC 60044	Instrument transformers
IEC 60045	Steam turbines
IEC 60050	International Electrotechnical Vocabulary
IEC 60051	Recommendation for direct acting indicating analogue electric measuring instruments and their accessories
IEC 60055	Paper-insulated metal-sheathed cables for rated voltages up to 18/30kV
IEC 60059	IEC standard current ratings
IEC 60060	High-voltage test techniques
IEC 60062	Marking codes for resistors and capacitors
IEC 60063	Preferred number series for resistors and capacitors
IEC 60061	Lamp caps and holders together with gauges for the control of interchangeability and safety
IEC 60064	Tungsten filament type GLS (General Lighting Solutions) bulbs
IEC 60065	Audio, video and similar electronic apparatus – Safety requirements
IEC 60068	Environmental Testing
IEC 60071	Insulation Co-ordination
IEC 60073	Basic Safety principles for man-machine interface, marking and identification – coding principles for indicators and actuators
IEC 60076	Power transformers
IEC 60077	Railway applications – Electric equipment for rolling stock
IEC 60079	Explosive Atmospheres
IEC 60083	Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
IEC 60085	Electrical insulation
IEC 60086	Primary batteries;
IEC 60092	Electrical installations on ships
IEC 60094	Magnetic tape sound recording and reproducing systems
IEC 60095	Lead-acid starter batteries
IEC 60096	Radio-frequency cables
IEC 60098	Rumble measurement on Vinyl Disc Turntables
IEC 60099	Surge arresters
IEC 60119	The Electrical Performance of Semiconductor Rectifiers (Metal Rectifiers)
IEC 60134	Absolute maximum and design ratings of tube and semiconductor devices
IEC 60137	Bushings for alternating voltages above 1000V
IEC 60146	Semiconductor Converters
IEC 60156	Dielectric Strength
IEC 60169	Radio-frequency connectors
IEC 60183	Guide to the selection of high voltage cables
IEC 60188	High-pressure mercury vapour lamps – Performance specifications
IEC 60193	Hydraulic turbines, storage pumps and pump-turbines – Model acceptance tests
IEC 60204	Safety of machinery
IEC 60214	On-load tap changers
IEC 60228	Conductors of insulated cables
IEC 60233	Tests on Hollow Insulators for use in Electrical Equipment
IEC 60238	Edison screw Lampholders
IEC 60239	Graphite electrodes for electric arc furnaces , Dimensions and designation
IEC 60245	Rubber-Insulated Cables
IEC 60254	Lead-acid traction batteries
IEC 60255	Electrical Relays
IEC 60268	Sound system equipment
IEC 60269	Low voltage fuses
IEC 60270	High-Voltage Test Techniques & Partial Discharge Measurements
IEC 60273	Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000V
IEC 60287	Calculation of permissible current in cables at steady state rating
IEC 60296	Mineral Insulating oils for transformers & switchgear
IEC 60297	Dimensions of mechanical structures of the 482.6mm (19in) series
IEC 60298	high voltage switchgear in metallic enclosure
IEC 60308	Hydraulic turbines – Testing of control systems
IEC 60309	Plugs, socket-outlets and couplers for industrial purposes
IEC 60317	Specifications for particular types of winding wires
IEC 60320	Appliance couplers for household and similar general purposes
IEC 60331	Tests for Electric Cables under Fire Conditions
IEC 60332	Flame Retardant vs Fire Rate Cables
IEC 60335	Safety of electrical household appliances
IEC 60364	Electrical installations of buildings
IEC 60397	Test methods for batch furnaces with metallic heating resistors
IEC 60398	Installations for electroheating and electromagnetic processing – General test methods
IEC 60417	Graphical symbols for use on equipment
IEC 60439	Low voltage switchgear and controlgear assemblies
IEC 60445	Basic and safety principles for man-machine interface
IEC 60446	Wiring colours
IEC 60457	Method of sampling insulating liquids
IEC 60479	Effects of current on human beings and livestock
IEC 60502	Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um = 1,2kV) up to 30kV (Um = 36kV)
IEC 60519	Safety in installations for electroheating and electromagnetic processing
IEC 60529	Degrees of protection provided by enclosures (IP Code)
IEC 60534	Industrial-process control valves
IEC 60539	Directly heated negative temperature coefficient thermistors
IEC 60545	Guide for commissioning, operation and maintenance of hydraulic turbines
IEC 60546	Controllers with analogue signals for use in industrial-process control systems
IEC 60571	Electronic equipment used on rail vehicles
IEC 60574	Audio-visual, video and television equipment and systems
IEC 60598	Luminaires
IEC 60559	Binary floating-point arithmetic for microprocessor systems
IEC 60601	Medical Electrical Equipment
IEC 60603	Connectors for frequencies below 3MHz for use with printed boards
IEC 60609	Hydraulic turbines, storage pumps and pump-turbines – Cavitation pitting evaluation
IEC 60617	Graphical symbols for diagrams
IEC 60622	Sealed nickel-cadmium prismatic rechargeable single cells
IEC 60623	Vented nickel-cadmium prismatic rechargeable single cells
IEC 60651	Sound level meters
IEC 60662	High-pressure sodium lamp – Performance specifications
IEC 60664	Insulation coordination for equipment within low-voltage systems
IEC 60669	Switches for household and similar fixed-electrical installations
IEC 60676	Industrial electroheating equipment – Test methods for direct arc furnaces
IEC 60680	Test methods of plasma equipment for electroheat and electrochemical applications
IEC 60683	Test methods for submerged arc furnaces
IEC 60688	Electrical measuring transducers for converting AC electrical quantities to analogue or digital signals
IEC 60694	Common Specifications For High-Voltage Switchgear and Controlgear Standards
IEC 60695	Fire Hazard Testing
IEC 60703	Test methods for electroheating installations with electron guns
IEC 60708	Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC 60715	Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations.
IEC 60721	Classification of environmental conditions
IEC 60726	Dry type power transformers
IEC 60728	Cable networks for television signals, sound signals and interactive services
IEC 60730	Class B certification requirements for appliances.
IEC 60747	Semiconductor devices; Part 1: General
IEC 60748	Semiconductor devices & integrated circuits
IEC 60750	Item designation in electrotechnology (Withdrawn! This publication has been replaced by IEC 61346-1:1996)
IEC 60760	Flat, quick-connect terminations (merged into IEC 61210:2010-08)
IEC 60774	VHS/S-VHS video tape cassette system
IEC 60793	Optical fibres
IEC 60779	Test methods for electroslag remelting furnaces
IEC 60801	EMI and RFI Immunity
IEC 60805	Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
IEC 60809	Filament lamps for road vehicles – Dimensional, electrical and luminous requirements
IEC 60811	Common test methods for insulating and sheathing materials of electric cables and optical cables
IEC 60812	Analysis techniques for system reliability – Procedure for failure mode and effects analysis (FMEA)
IEC 60815	Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
IEC 60825	Laser safety
IEC 60826	Design criteria of overhead transmission lines
IEC 60840	Power cables with extruded insulation and their accessories for rated voltages above 30kV (Um = 36kV) up to 150kV (Um = 170kV) � Test methods and requirements
IEC 60849	Sound Systems for Emergency Purposes
IEC 60865	Short Circuit Current: Calculation of Effects
IEC 60870	Telecontrol equipment and systems
IEC 60874	Connectors for optical fibres
IEC 60884	Plugs and socket-outlets for household and similar purposes
IEC TR 60890	A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
IEC 60898	Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations.
IEC 60904	Photovoltaic Devices (Part 1-10).
IEC 60906	IEC system of plugs and socket-outlets for household and similar purposes: IEC 60906-1 for 230 VAC, IEC 60906-2 for 120 VAC, and IEC 60906-3 for safety extra-low voltage (SELV).
IEC 60908	Compact disk digital audio system
IEC 60909	Short-circuit currents in three-phase a.c. systems – Part 0: Calculation of currents
IEC 60921	Ballasts for tubular fluorescent lamps – Performance requirements
IEC 60929	AC-supplied electronic ballasts for tubular fluorescent lamps – Performance requirements
IEC 60939	Passive filter units for electromagnetic interference suppression
IEC 60942	Electroacoustics – Sound calibrators
IEC 60945	Maritime Navigation and Radiocommunication Equipment and Systems – General Requirements – Methods of Testing and Required Test Results
IEC 60947	Standards for low-voltage switchgear and controlgear
IEC 60950	Safety of information technology equipment
IEC 60958	Digital Audio Interface
IEC 60976	Medical electrical equipment – Medical electron accelerators – Functional performance characteristics
IEC 60977	Medical electrical equipment – Medical electron accelerators – Guidelines for functional performance characteristics
IEC 60994	Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
IEC 61000	Electromagnetic compatibility (EMC)
IEC 61008	Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
IEC 61009	Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBO’s)
IEC 61010	Safety requirements for electrical equipment for measurement, control and laboratory use
IEC 61024	Protection of structures against lightning
IEC 61025	Fault tree analysis
IEC 61030	Domestic Digital Bus – a standard for a low-speed multi-master serial communication bus for home automation applications.
IEC 61043	Sound intensity meters with pairs of microphones
IEC 61058	Switches for Appliances
IEC 61071	Capacitors for power electronics
IEC 61084	Cable trunking and ducting systems for electrical installations
IEC 61097	Global maritime distress and safety system (GMDSS)
IEC 61116	Electromechanical equipment guide for small hydroelectric installations
IEC 61131	Programmable Logic Controllers
IEC 61140	Protection against electric shock – Common aspects for installation and equipment
IEC 61149	Safety of mobile radios
IEC 61156	Multicore and symmetrical pair/qud cables for digital communications
IEC 61158	Industrial communication networks – Fieldbus specifications
IEC 61162	Maritime navigation and radiocommunication equipment and systems, Digital Systems
IEC 61164	Reliability growth – Statistical test and estimation methods
IEC 61167	Metal halide lamps – Performance specification
IEC 61174	Maritime Navigation and Radio Communications, Electronic Chart Display and Information System (ECDIS)
IEC 61194	Characteristic parameters of stand-alone photovoltaic (PV) systems
IEC 61210	Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
IEC 61211	Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1,000V – Impulse puncture testing in air
IEC 61215	Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61226	Nuclear power plants – Instrumentation and control important to safety – Classification of instrumentation and control functions
IEC 61238	Compression and mechanical connectors for power cables for rated voltages up to 30 kV
IEC 61241	Electrical apparatus for use in the presence of combustible dust
IEC 61277	Terrestrial photovoltaic (PV) power generating systems – General and guide
IEC 61280	Field testing method for measuring single mode fibre optic cable
IEC 61286	Character set with electrotechnical symbols
IEC 61307	Industrial microwave heating installations – Test methods for the determination of power output
IEC 61308	High-frequency dielectric heating installations – Test methods for the determination of power output
IEC 61326	Electrical equipment for measurement, control and laboratory use – EMC requirements
IEC 61334	Distribution automation using distribution line carrier systems – a standard for low-speed reliable power line communications by electricity meters, water meters and SCADA
IEC 61345	UV test for photovoltaic (PV) modules
IEC 61346	Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
IEC 61347	Lamp Controlgear
IEC 61355	Classification and designation of documents for plants, systems and equipment
IEC 61360	Common Data Dictionary
IEC 61362	Guide to specification of hydraulic turbine control systems
IEC 61363	Electrical installations of ships and mobile and fixed offshore units
IEC 61364	Nomenclature for hydroelectric powerplant machinery
IEC 61366	Hydraulic turbines, storage pumps and pump-turbines – Tendering Documents
IEC 61378	Converter Transformers
IEC 61400	Wind turbines
IEC 61427	Secondary cells and batteries for renewable energy storage – General requirements and methods of test
IEC 61429	Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
IEC TS 61430	Secondary cells and batteries – Test methods for checking the performance of devices designed for reducing explosion hazards – Lead-acid starter batteries
IEC TR 61431	Guide for the use of monitor systems for lead-acid traction batteries
IEC 61434	Secondary cells and batteries containing alkaline or other non-acid electrolytes – Guide to designation of current in alkaline secondary cell and battery standards
IEC 61435	Nuclear instrumentation – High-purity germanium crystals for radiation detectors – Measurement methods of basic characteristics
IEC TR 61438	Possible safety and health hazards in the use of alkaline secondary cells and batteries – Guide to equipment manufacturers and users
IEC 61439	Low-Voltage switchgear and controlgear assemblies
IEC 61442	Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC 61443	Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
IEC 61445	Digital Test Interchange Format (DTIF)
IEC 61452	Nuclear instrumentation – Measurement of gamma-ray emission rates of radionuclides – Calibration and use of germanium spectrometers
IEC 61453	Nuclear instrumentation – Scintillation gamma ray detector systems for the assay of radionuclides – Calibration and routine tests
IEC 61462	Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000V – Definitions, test methods, acceptance criteria and design recommendations
IEC TS 61463	Bushings – Seismic qualification
IEC TS 61464	Insulated bushings – Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregating medium of the main insulation (generally paper)
IEC 61466	Composite string insulator units for overhead lines with a nominal voltage greater than 1000V
IEC 61467	Insulators for overhead lines – Insulator strings and sets for lines with a nominal voltage greater than 1000V – AC power arc tests
IEC 61468	Nuclear power plants – In-core instrumentation – Characteristics and test methods of self-powered neutron detectors
IEC 61472	Live working – Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV – A method of calculation
IEC 61477	Live working – Minimum requirements for the utilization of tools, devices and equipment
IEC 61478	Live working – Ladders of insulating material
IEC 61479	Live working – Flexible conductor covers (line hoses) of insulating material
IEC 61481	Live working – Phase comparators
IEC 61482	Live working – Protective clothing against the thermal hazards of an electric arc
IEC 61496	Safety of machinery – Electro-sensitive protective equipment
IEC 61497	Nuclear power plants – Electrical interlocks for functions important to safety – Recommendations for design and implementation
IEC 61499	Function blocks
IEC 61500	Nuclear power plants – Instrumentation and control important to safety – Data communication in systems performing category A functions
IEC 61501	Nuclear reactor instrumentation – Wide range neutron fluence rate meter – Mean square voltage method
IEC 61502	Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures
IEC 61504	Nuclear power plants – Instrumentation and control systems important to safety – Plant-wide radiation monitoring
IEC 61506	Industrial-process measurement and control – Documentation of application software
IEC 61508	Functional safety of electrical/electronic/programmable electronic safety-related systems
IEC 61511	Functional safety – safety instrumented systems for the process industry sector
IEC 61512	Batch control
IEC 61513	Functional safety – safety instrumented systems for the Nuclear Industries
IEC 61514	Industrial process control systems – Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61515	Mineral insulated thermocouple cables and thermocouples
IEC 61518	Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
IEC 61520	Metal thermowells for thermometer sensors – Functional dimensions
IEC 61523	Delay and Power Calculation Standards
IEC 61526	Radiation protection instrumentation – Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations – Direct reading personal dose equivalent meters
IEC 61534	Powertrack systems
IEC 61535	Installation couplers intended for permanent connection in fixed installations
IEC 61537	Cable management – Cable tray systems and cable ladder systems
IEC 61540	Electrical accessories – Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 61543	Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility
IEC 61545	Connecting devices – Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
IEC 61547	Equipment for general lighting purposes – EMC immunity requirements
IEC 61549	Miscellaneous lamps
IEC 61554	Panel-Mounted equipment – Electrical measuring instruments – Dimensions for panel mounting
IEC 61557	Equipment for measuring electrical safety in low-voltage distribution systems
IEC 61558	Safety of power transformers, power supplies, reactors and similar products
IEC 61559	Radiation protection instrumentation in nuclear facilities – Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
IEC 61560	Radiation protection instrumentation – Apparatus for non-destructive radiation tests of fur and other cloth samples
IEC 61562	Radiation protection instrumentation – Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
IEC 61563	Radiation protection instrumentation – Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
IEC 61566	Measurement of exposure to radio-frequency electromagnetic fields – Field strength in the frequency range 100�kHz to 1�GHz
IEC 61577	Radiation protection instrumentation – Radon and radon decay product measuring instruments
IEC 61578	Radiation protection instrumentation – Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments – Test methods
IEC 61580	Measurement of return loss on waveguide and waveguide assemblies
IEC 61582	Radiation protection instrumentation – In vivo counters – Classification, general requirements and test procedures for portable, transportable and installed equipment
IEC 61584	Radiation protection instrumentation – Installed, portable or transportable assemblies – Measurement of air kerma direction and air kerma rate
IEC TS 61586	Estimation of the reliability of electrical connectors
IEC 61587	Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297 series
IEC 61588	Precision clock synchronization protocol for networked measurement and control systems
IEC 61591	Household range hoods – Methods for measuring performance
IEC TR 61592	Household electrical appliances – Guidelines for consumer panel testing
IEC 61595	Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use
IEC TR 61597	Overhead electrical conductors – Calculation methods for stranded bare conductors
IEC 61599	Videodisk players – Methods of measuremt
IEC TR 61602	Connectors used in the field of audio, video and audiovisual engineering
IEC 61603	Infrared transmission of audio or video signals
IEC TR 61604	Dimensions of uncoated ring cores of magnetic oxides
IEC 61605	Fixed inductors for use in electronic and telecommunication equipment – Marking codes
IEC 61606	Audio and audiovisual equipment – Digital audio parts – Basic measurement methods of audio characteristics
IEC 61609	Microwave ferrite components – Guide for the drafting of specifications
IEC 61610	Prints and transparencies produced from electronic sources – Assessment of image quality
IEC 61619	Insulating liquids – Contamination by polychlorinated biphenyls (PCBs) – Method of determination by capillary column gas chromatography
IEC 61620	Insulating liquids – Determination of the dielectric dissipation factor by measurement of the conductance and capacitance – Test method
IEC 61621	Dry, solid insulating materials – Resistance test to high-voltage, low-current arc discharges
IEC 61628	Corrugated pressboard and presspaper for electrical purposes
IEC 61629	Aramid pressboard for electrical purposes
IEC 61631	Test method for the mechanical strength of cores made of magnetic oxides
IEC TR 61641	Enclosed low-voltage switchgear and controlgear assemblies – Guide for testing under conditions of arcing due to internal fault
IEC 61642	Industrial a.c. Networks Affected by Harmonics – Application of Filters and Shunt Capacitors
IEC 61643	Surge protective devices connected to low-voltage power distribution systems
IEC 61646	Thin-film terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61649	Weibull analysis
IEC 61650	Reliability data analysis techniques – Procedures for comparison of two constant failure rates and two constant failure (event) intensities
IEC 61660	Short-circuit currents in d.c. auxiliary installations in power plants and substations
IEC 61666	Industrial systems, installations and equipment and industrial products – Identification of terminals within a system
IEC 61669	Electroacoustics – Measurement of real-ear acoustical performance characteristics of hearing aids
IEC 61671	Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML
IEC 61672	Electroacoustics – Sound level meters
IEC 61674	Medical electrical equipment – Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
IEC 61675	Radionuclide imaging devices – Characteristics and test conditions
IEC 61676	Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
IEC 61683	Photovoltaic systems – Power conditioners – Procedure for measuring efficiency
IEC 61685	Ultrasonics – Flow measurement systems – Flow test object
IEC 61689	Ultrasonics – Physiotherapy systems – Field specifications and methods of measurement in the frequency range 0,5�MHz to 5�MHz
IEC 61690	Electronic design interchange format (EDIF)
IEC 61691	Behavioural languages
IEC 61701	Salt mist corrosion testing of photovoltaic (PV) modules
IEC 61703	Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 61709	Electric components – Reliability – Reference conditions for failure rates and stress models for conversion
IEC 61710	Power law model – Goodness-of-fit tests and estimation methods
IEC 61724	Photovoltaic system performance monitoring – Guidelines for measurement
IEC 61725	Analytical expression for daily solar profiles
IEC 61726	Cable assemblies, cables, connectors and passive microwave components – Screening attenuation measurement by the reverberation chamber method
IEC 61727	Photovoltaic (PV) systems – Characteristics of the utility interface
IEC 61730	Photovoltaic modules
IEC TR 61734	Application of symbols for binary logic and analogue elements
IEC 61739	Integrated circuits
IEC 61744	Calibration of fibre optic chromatic dispersion test sets
IEC 61745	End-face image analysis procedure for the calibration of optical fibre geometry test sets
IEC 61746	Calibration of optical time-domain reflectometers (OTDR)
IEC 61747	Liquid crystal display devices
IEC 61753	Fibre optic interconnecting devices and passive components performance standard
IEC 61754	Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces
IEC 61755	Fibre optic connector optical interfaces
IEC 61756	Fibre optic interconnecting devices and passive components – Interface standard for fibre management systems
IEC 61757	Fibre optic sensors
IEC 61758	Fibre optic interconnecting devices and passive components – Interface standard for closures
IEC 61760	Surface mounting technology
IEC 61770	Electric appliances connected to the water mains – Avoidance of backsiphonage and failure of hose-sets
IEC 61771	Nuclear power plants – Main control-room – Verification and validation of design
IEC 61772	Nuclear power plants – Control rooms – Application of visual display units (VDUs)
IEC 61773	Overhead lines – Testing of foundations for structures
IEC TS 61774	Overhead lines – Meteorological data for assessing climatic loads
IEC 61784	Industrial communication networks – Profiles
IEC 61786	Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings
IEC 61788	Superconductivity
IEC 61797	Transformers and inductors for use in telecommunication and electronic equipment – Main dimensions of coil formers
IEC 61800	Adjustable speed electrical power drive systems
IEC 61803	Determination of power losses in high-voltage direct current (HVDC) converter stations
IEC TS 61804	Function blocks (FB) for process control
IEC TR 61807	Magnetic properties of magnetically hard materials at elevated temperatures – Methods of measurement
IEC 61810	Electromechanical elementary relays
IEC 61811	Electromechanical telecom elementary relays of assessed quality
IEC 61812	Time relays for industrial and residential use
IEC TS 61813	Live working – Care, maintenance and in-service testing of aerial devices with insulating booms
IEC 61817	Household portable appliances for cooking, grilling and similar use – Methods of measuring performance Household portable appliances for cooking, grilling and similar use – Methods for measuring performance
IEC 61821	Electrical installations for lighting and beaconing of aerodromes – Maintenance of aeronautical ground lighting constant current series circuits
IEC 61822	Electrical installations for lighting and beaconing of aerodromes – Constant current regulators
IEC 61823	Electrical installations for lighting and beaconing of aerodromes – AGL series transformers
IEC TS 61827	Electrical installations for lighting and beaconing of aerodromes – Characteristics of inset and elevated luminaires used on aerodromes and heliports
IEC 61828	Ultrasonics – Focusing transducers – Definitions and measurement methods for the transmitted fields
IEC 61829	Crystalline silicon photovoltaic (PV) array – On-site measurement of I-V characteristics
IEC TR 61831	On-line analyser systems – Guide to design and installation
IEC TR 61832	Design and installation of on-line analyser systems – Guide to technical enquiry and bid evaluation
IEC 61834	Recording – Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)
IEC 61835	Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape – Format D-5
IEC TS 61836	Solar photovoltaic energy systems – Terms, definitions and symbols
IEC 61837	Surface mounted piezoelectric devices for frequency control and selection – Standard outlines and terminal lead connections
IEC TR 61838	Nuclear power plants – Instrumentation and control important to safety – Use of probabilistic safety assessment for the classification of functions
IEC 61839	Nuclear power plants – Design of control rooms – Functional analysis and assignment
IEC 61842	Microphones and earphones for speech communications
IEC 61843	Measuring method for the level of intermodulation products generated in a gyromagnetic device
IEC 61846	Ultrasonics – Pressure pulse lithotripters – Characteristics of fields
IEC 61847	Ultrasonics – Surgical systems – Measurement and declaration of the basic output characteristics
IEC 61850	Communication Networks and Systems for Power Utility Automation
IEC 61851	Electric vehicle conductive charging system
IEC TR 61852	Medical electrical equipment – Digital imaging and communications in medicine (DICOM) – Radiotherapy objects
IEC 61853	Photovoltaic (PV) module performance testing and energy rating
IEC 61854	Overhead lines – Requirements and tests for spacers
IEC 61855	Household electrical hair care appliances – Methods of measuring the performance
IEC 61857	Electrical insulation systems
IEC 61858	Electrical insulation systems – Thermal evaluation of modifications to an established electrical insulation system (EIS)
IEC TR 61859	Guidelines for radiotherapy treatment rooms design
IEC 61865	Overhead lines – Calculation of the electrical component of distance between live parts and obstacles – Method of calculation
IEC 61866	Audiovisual systems – Interactive text transmission system (ITTS)
IEC 61868	Mineral insulating oils – Determination of kinematic viscosity at very low temperatures
IEC 61869	Instrument transformers
IEC 61874:1998	Nuclear instrumentation – Geophysical borehole instrumentation to determine rock density (‘density logging’)
IEC 61880	Video systems (525/60) – Video and accompanied data using the vertical blanking interval – Analogue interface
IEC 61881	Railway applications – Rolling stock equipment – Capacitors for power electronics
IEC 61882	Hazard and operability studies (HAZOP studies) – Application guide
IEC 61883	Consumer audio/video equipment – Digital interface
IEC 61888	Nuclear power plants – Instrumentation important to safety – Determination and maintenance of trip setpoints
IEC 61892	Mobile and fixed offshore units – Electrical installations
IEC TS 61895	Ultrasonics – Pulsed Doppler diagnostic systems – Test procedures to determine performance
IEC 61897	Overhead lines – Requirements and tests for Stockbridge type aeolian vibration dampers
IEC TR 61901	Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV)
IEC 61904	Video recording – Helical-scan digital component video cassette recording format using 12,65 mm magnetic tape and incorporating data compression (Format digital-L)
IEC 61907	Communication network dependability engineering
IEC TR 61908	The technology roadmap for industry data dictionary structure, utilization and implementation
IEC 61909	Audio recording – Minidisc system
IEC 61910	Medical electrical equipment – Radiation dose documentation
IEC TR 61911	Live working – Guidelines for installation of distribution line conductors – Stringing equipment and accessory items
IEC TR 61912	Low-voltage switchgear and controlgear – Overcurrent protective devices
IEC 61914	Cable cleats for electrical installations
IEC 61915	Low-voltage switchgear and controlgear – Device profiles for networked industrial devices
IEC TR 61916	Electrical accessories – Harmonization of general rules
IEC 61918	Industrial communication networks – Installation of communication networks in industrial premises
IEC 61920	Infrared free air applications
IEC 61921	Power capacitors – Low-voltage power factor correction banks
IEC 61922	High-frequency induction heating installations – Test methods for the determination of power output of the generator
IEC TR 61923	Household electrical appliances – Method of measuring performance – Assessment of repeatability and reproducibility
IEC 61924	Maritime navigation and radiocommunication equipment and systems – Integrated navigation systems
IEC 61925	Multimedia systems and equipment – Multimedia home server systems – Vocabulary of home server
IEC 61926	Design automation
IEC TR 61930	Fibre optic graphical symbology
IEC TR 61931	Fibre optic – Terminology
IEC TS 61934	Electrical insulating materials and systems – Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
IEC 61935	Specification for the testing of balanced and coaxial information technology cabling
IEC 61936	Power installations exceeding 1kV a.c.
IEC 61937	Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
IEC 61938	Multimedia systems – Guide to the recommended characteristics of analogue interfaces to achieve interoperability
IEC 61943	Integrated circuits – Manufacturing line approval application guideline
IEC TS 61944	Integrated circuits – Manufacturing line approval – Demonstration vehicles
IEC TS 61945	Interated circuits – Manufacturing line approval – Methodology for technology and failure analysis
IEC TR 61946	Mineral insulating oils – Characterization of paraffinic/naphthenic nature – Low temperature differential scanning calorimetry (DSC) test method
IEC 61947	Electronic projection – Measurement and documentation of key performance criteria
IEC TR 61948	Nuclear medicine instrumentation – Routine tests
IEC TS 61949	Ultrasonics – Field characterization – In situ exposure estimation in finite-amplitude ultrasonic beams
IEC 61950	Cable management systems – Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
IEC 61951	Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells
IEC 61952	Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1,000 V – Definitions, test methods and acceptance criteria
IEC 61954	Static var compensators (SVC) – Testing of thyristor valves
IEC TS 61956	Methods of test for the evaluation of water treeing in insulating materials
IEC 61959	Secondary cells and batteries containing alkaline or other non-acid electrolytes – Mechanical tests for sealed portable secondary cells and batteries
IEC 61960	Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications
IEC 61964	Integrated circuits – Memory devices pin configurations
IEC 61965	Mechanical safety of cathode ray tubes
IEC 61966	Multimedia systems — Colour measurement
IEC 61967	Integrated circuits – Measurement of electromagnetic emissions, 150kHz to 1GHz
IEC 61968	Application integration at electric utilities – System interfaces for distribution management
IEC 61969	Mechanical structures for electronic equipment – Outdoor enclosures
IEC 61970	Application integration at electric utilities – Energy management system application program interface (EMS-API)
IEC TS 61973	High voltage direct current (HVDC) substation audible noise
IEC 61975	High-voltage direct current (HVDC) installations – System tests
IEC 61976	Nuclear instrumentation – Spectrometry – Characterization of the spectrum background in HPGe gamma-ray spectrometry
IEC 61977	Fibre optic interconnecting devices and passive components – Fibre optic filters – Generic specification
IEC 61978	Fibre optic interconnecting devices and passive components – Fibre optic passive chromatic dispersion compensators
IEC 61980	Electric vehicle wireless power transfer (WPT) systems
IEC 61982	Secondary batteries (except lithium) for the propulsion of electric road vehicles – Performance and endurance tests
IEC 61984	Connectors – Safety requirements and tests
IEC 61987	Industrial-process measurement and control – Data structures and elements in process equipment catalogues
IEC 61988	Plasma display panels
IEC 61991	Railway applications – Rolling stock – Protective provisions against electrical hazards
IEC 61992	Railway applications – Fixed installations – DC switchgear
IEC 61993	Maritime navigation and radiocommunication equipment and systems
IEC TS 61994	Piezoelectric and dielectric devices for frequency control and selection – Glossary
IEC 61995	Devices for the connection of luminaires for household and similar purposes
IEC 61996	Maritime navigation and radiocommunication equipment and systems – Shipborne voyage data recorder (VDR)
IEC TR 61997	Guidelines for the user interface in multimedia equipment for general purpose use
IEC TR 61998	Model and framework for standardization in multimedia equipment and systems
IEC TR 62000	Guidance for combining different single-mode fibres types
IEC TR 62001	High-voltage direct current (HVDC) systems – Guidebook to the specification and design evaluation of A.C. filters
IEC 62002	Mobile and portable DVB-T/H radio access
IEC 62003	Nuclear power plants – Instrumentation and control important to safety – Requirements for electromagnetic compatibility testing
IEC 62004	Thermal-resistant aluminium alloy wire for overhead line conductor
IEC 62005	Reliability of fibre optic interconnecting devices and passive components
IEC 62006	Hydraulic machines – Acceptance tests of small hydroelectric installations
IEC 62007	Semiconductor optoelectronic devices for fibre optic system applications
IEC 62008	Performance characteristics and calibration methods for digital data acquisition systems and relevant software
IEC TR 62010	Analyser systems – Guidance for maintenance management
IEC 62011	Insulating materials – Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes
IEC 62012	Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments
IEC 62014	Electronic design automation libraries
IEC 62014-4	IP-XACT – Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
IEC 62014-5	Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
IEC 62023	Structuring of technical information and documentation
IEC 62027	Preparation of object lists, including parts lists
IEC 62031	LED modules for general lighting – Safety specifications
IEC 62035	Discharge lamps (excluding fluorescent lamps) – Safety specifications
IEC 62040	Uninterruptible power systems
IEC 62041	EMC requirements for power transformers, power supplies, reactors and similar products
IEC TS 62046	Safety of machinery – Application of protective equipment to detect the presence of persons
IEC 62052	Electricity metering equipment (AC) General requirements, tests and test conditions
IEC 62056	DLM/COSEM communication protocol for reading utility meters
IEC 62061	Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
IEC 62068	Electrical insulating materials and systems – General method of evaluation of electrical endurance under repetitive voltage impulses
IEC 62076	Industrial electroheating installations – Test methods for induction channel and induction crucible furnaces
IEC 62087	Methods of measurement for the power consumption of audio, video and related equipment
IEC 62097	Hydraulic machines, radial and axial – Performance conversion method from model to prototype
IEC TS 62100	Cables for aeronautical ground lighting primary circuits
IEC 62107	Super Video Compact Disc
IEC 62108	Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval
IEC 62121	Methods of measurement for minidisc recorders/players
IEC 62133	Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
IEC 62138	Nuclear Power Plants – Instrumentation and control important for safety – Software aspects for computer-based systems performing category B or C functions
IEC TR 62157	Cylindrical machined carbon electrodes – Nominal dimensions
IEC 62196	Plugs and sockets for charging electric vehicles
IEC 62208	Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements
IEC 62209	Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures
IEC 62246	Reed switches
IEC 62256	Hydraulic turbines, storage pumps and pump-turbines – Rehabilitation and performance improvement
IEC 62262	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 62264	Enterprise-control system integration
IEC 62265	Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks
IEC 62270	Hydroelectric power plant automation – Guide for computer-based control
IEC 62271	High-voltage switchgear and controlgear
IEC 62278	Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
IEC 62282	Fuel cell technologies
IEC 62301	Household electrical appliances – Measurement of standby power
IEC 62304	Medical Device Software – Software Life Cycle Processes
IEC 62305	Protection Against Lightning
IEC 62325	Standards related to energy market models & communications
IEC TR 62331	Pulsed field magnetometry
IEC 62351	Power System Control and Associated Communications – Data and Communication Security
IEC 62353	Medical electrical equipment – Recurrent test and test after repair of medical electrical equipment
IEC TR 62357	Power system control and associated communications – Reference architecture for object models, services and protocols
IEC 62365	Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks
IEC 62366	Medical devices – Application of usability engineering to medical devices
IEC 62368	Audio/video, information and communication technology equipment
IEC 62379	Common control interface for networked digital audio and video products
IEC 62384	DC or AC supplied electronic control gear for LED modules – Performance requirements
IEC 62386	Digital addressable lighting interface
IEC 62388	Maritime Navigation and Radio Communications, Shipborne Radar
IEC 62395	Electrical resistance trace heating systems for industrial and commercial applications
IEC 62420	Concentric lay stranded overhead electrical conductors containing one or more gap(s)
IEC 62439	Industrial communication networks – High availability automation networks
IEC 62443	Industrial communication networks – Network and system security (DRAFT)
IEC 62446	Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection
IEC 62455	Internet protocol (IP) and transport stream (TS) based service access
IEC 62464	Magnetic resonance equipment for medical imaging
IEC 62471	Photobiological safety of lamps and lamp systems
IEC 62474	Material declaration for products of and for the electrotechnical industry
IEC 62481	Digital Living Network Alliance (DLNA) home networked device interoperability guidelines
IEC 62491	Industrial systems, installations and equipment and industrial products – Labelling of cables and cores
IEC 62493	Assessment of lighting equipment related to human exposure to electromagnetic fields
IEC 62502	Analysis techniques for dependability – Event tree analysis (ETA)
IEC 62504	General lighting – Light emitting diode (LED) products and related equipment – Terms and definitions
IEC 62505	Railway applications – Fixed installations – Particular requirements for a.c. switchgear
IEC 62507	Identification systems enabling unambiguous information interchange – Requirements
IEC 62531	Property Specification Language (PSL)
IEC TS 62556	Ultrasonics – Field characterization – Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
IEC 62560	Self-ballasted LED-lamps for general lighting services by voltage > 50V – Safety specifications
IEC 62561	Lightning protection system components (LPSC)
IEC 62606	General requirements for arc fault detection devices
IEC 62612	Self-ballasted LED lamps for general lighting services with supply voltages > 50V – Performance requirements
IEC 62680	Universal Serial Bus (USB) interfaces for data and power
IEC 62682	Management of alarm systems for the process industries
IEC 62684	Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
IEC TR 62685	Industrial communication networks – Profiles – Assessment guideline for safety devices using IEC 61784-3functional safety communication profiles (FSCPs)
IEC 62693	Industrial electroheating installations – Test methods for infrared electroheating installations
IEC 62700	DC Power supply for notebook computer
IEC 62703	Expression of performance of fluorometric oxygen analyzers in liquid media
IEC 62708	Documents kinds for electrical and instrumentation projects in the process industry
IEC 62717	LED modules for general lighting – Performance requirements
IEC 62734	Industrial networks – Wireless communication network and communication profiles – ISA 100.11a
IEC 62769	Field device integration (FDI)
IEC 62776	Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
IEC TR 62794	Industrial-process measurement, control and automation – Reference model for representation of production facilities (digital factory)
IEC TR 62795	Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
IEC TS 62796	Energy efficiency in electroheating installations
IEC 62798	Industrial electroheating equipment – Test methods for infrared emitters
IEC TR 62837	Energy efficiency through automation systems
IEC 62885	Dry vacuum cleaners for household or similar use – Methods for measuring the performance
IEC TS 62872	Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
IEC TR 62914	Secondary cells and batteries containing alkaline or other non-acid electrolytes – Experimental procedure for the forced internal short-circuit test of IEC 62133:2012
IEC PAS 62948	Industrial networks – Wireless communication network and communication profiles – WIA-FA
IEC PAS 62953	Industrial communication networks – Fieldbus specifications – ADS-net
IEC 80001	Application of risk management for IT-networks incorporating medical devices
IEC 81346	Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations

by PipeAdmin
Tags: acronyms, electrical, Electrician

Feb 8, 2018

Standards – MSS

MSS SP-100	Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Type Valves
MSS SP-101	Part-Turn Valve Actuator Attachment – Flange and Driving Component Dimensions and Performance Characteristics
MSS SP-102	Multi-Turn Valve Actuator Attachment – Flange and Driving Component Dimensions and Performance Characteristics
MSS SP-104	Wrought Copper Solder Joint Pressure Fittings
MSS SP-105	Instrument Valves for Code Applications
MSS SP-106	Cast Copper Alloy Flanges and Flanged Fittings, Class 125, 150 and 300
MSS SP-108	Resilient-Seated Cast Iron-Eccentric Plug Valves
MSS SP-109	Welded Fabricated Copper Solder Joint Pressure Fittings
MSS SP-110	Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends
MSS SP-111	Gray-Iron and Ductile-Iron Tapping Sleeves
MSS SP-112	Quality Standard for Evaluation of Cast Surface Finishes -Visual and Tactile Method. This SP must be used with a 10-surface, three dimensional Cast Surface Comparator, which is a necessary part of the Standard.
MSS SP-113	Connecting Joint between Tapping Machines and Tapping Valves
MSS SP-114	Corrosion Resistant Pipe Fittings Threaded and Socket Welding, Class 150 and 1000
MSS SP-115	Excess Flow Valves, 1 1/4 NPS and Smaller, for Natural Gas Service
MSS SP-116	Service Line Valves and Fittings for Drinking Water Systems
MSS SP-117	Bellows Seals for Globe and Gate Valves
MSS SP-118	Compact Steel Globe & Check Valves – Flanged, Flangeless, Threaded & Welding Ends (Chemical & Petroleum Refinery Service)
MSS SP-119	Factory-Made Wrought Belled End Socket-Welding Fittings
MSS SP-120	Flexible Graphite Packing System for Rising Stem Steel Valves – Design Requirements
MSS SP-121	Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves
MSS SP-122	Plastic Industrial Ball Valves
MSS SP-123	Non-Ferrous Threaded and Solder-Joint Unions for Use With Copper Water Tube
MSS SP-124	Fabricated Tapping Sleeves
MSS SP-125	Gray Iron and Ductile Iron In-Line, Spring-Loaded, Center-Guided Check Valves
MSS SP-126	Steel In-Line Spring-Assisted Center Guided Check Valves
MSS SP-127	Bracing for Piping Systems Seismic-Wind-Dynamic Design, Selection, Application
MSS SP-128	Ductile Iron Gate Valves
MSS SP-129	Copper-Nickel Socket-Welding Fittings and Unions
MSS SP-130	Bellows Seals for Instrument Valves
MSS SP-131	Metallic Manually Operated Gas Distribution Valves
MSS SP-132	Compression Packing Systems for Instrument Valves
MSS SP-133	Excess Flow Valves for Low Pressure Fuel Gas Appliances
MSS SP-134	Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
MSS SP-135	High Pressure Steel Knife Gate Valves
MSS SP-136	Ductile Iron Swing Check Valves
MSS SP-137	Quality Standard for Positive Material Identification of Metal Valves, Flanges, Fittings, and Other Piping Components
MSS SP-138	Quality Standard Practice for Oxygen Cleaning of Valves & Fittings
MSS SP-139	Copper Alloy Gate, Globe, Angle, and Check Valves for Low Pressure/Low Temperature Plumbing Application
MSS SP-25	Standard Marking System for Valves, Fittings, Flanges and Unions
MSS SP-42	Class 150 Corrosion Resistant Gate, Globe, angle and Check Valves with Flanged and Butt Weld Ends
MSS SP-43	Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
MSS SP-44	Steel Pipeline Flanges
MSS SP-45	Bypass and Drain Connections
MSS SP-51	Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings
MSS SP-53	Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components – Magnetic Particle Exam Method
MSS SP-54	Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components – Radiographic Examination Method
MSS SP-55	Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components – Visual Method for Evaluation of Surface Irregularities
MSS SP-58	Pipe Hangers and Supports – Materials, Design, Manufacture, Selection, Application, and Installation
MSS SP-6	Standard Finishes for Contact Faces of Pipe Flanges and Connecting & End Flanges of Valves and Fittings
MSS SP-60	Connecting Flange Joint Between Tapping Sleeves and Tapping Valves
MSS SP-61	Hydrostatic testing of steel valves
MSS SP-65	High Pressure Chemical Industry Flanges and threaded Stubs for Use with Lens Gaskets
MSS SP-67	Butterfly Valves
MSS SP-68	High Pressure Butterfly Valves with Offset Design
MSS SP-69	Pipe Hangers and Supports ‚Äì Selection and Application
MSS SP-70	Cast Iron Gate Valves, Flanged and Threaded Ends
MSS SP-71	Cast Iron Swing Check Valves, Flanged and Threaded Ends
MSS SP-72	Ball valves with Flanged or Butt-Welding ends for General Service
MSS SP-73	Brazing Joints for Copper and Copper Alloy Pressure Fittings
MSS SP-75	Specification for High Test Wrought Butt Welding Fittings
MSS SP-77	Guidelines for Pipe Support Contractual Relationships
MSS SP-78	Cast Iron Plug Valves
MSS SP-79	Socket Welding Reducer Inserts
MSS SP-80	Bronze Gate, Globe Angle and Check Valves
MSS SP-81	Stainless Steel, Bonnetless, Flanged Knife Gate Valves
MSS SP-82	Valve Pressure Testing Methods (withdrawn, replaced by MSS SP-01)
MSS SP-83	Class 300 Steel Pipe Unions, Socket Welding and Threaded
MSS SP-84	Steel valves socket welding and threaded ends
MSS SP-85	Cast Iron Globe and Angle Valves, Flanged and Threaded Ends
MSS SP-86	Guidelines for Metric Data in Standards for Valves, Flanges, Fittings and Actuators
MSS SP-88	Diaphragm Valves
MSS SP-89	Pipe Hangers and Supports -Fabrication and Installation Practices
MSS SP-9	Spot Facing for Bronze, Iron and Steel Flanges
MSS SP-90	Guidelines on Terminology for Pipe Hangers and Supports
MSS SP-91	Guidelines for Manual Operation of Valves
MSS SP-92	MSS Valve User Guide
MSS SP-93	Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components – Liquid Penetrant Exam Method
MSS SP-94	Quality Standard for Ferritic and Martensitic Steel Castings for Valves, Flanges, Fittings, and Other Piping Components – Ultrasonic Examination Method
MSS SP-95	Swage(d) Nipples and Bull Plugs
MSS SP-96	Guidelines on Terminology for Valves and Fittings
MSS SP-97	Integrally Reinforced Forged Branch Outlet Fittings – Socket Welding, Threaded and Buttwelding Ends
MSS SP-98	Protective Coatings for the Interior of Valves, Hydrants, and Fittings
MSS SP-99	Instrument Valves

by PipeAdmin
Tags: acronyms, electrical, Electrician

Feb 8, 2018

Standards – JIS

JIS A 5302	Concrete pipes and reinforced concrete pipes
JIS A 5303	Reinforced spun and centrifugal reinforced concrete pipes
JIS A 5314:1998	Mortar lining for ductile iron pipes
JIS A 5322	Reinforced spun concrete pipes with socket
JIS A 5333:1993	Core type prestressed concrete pipes
JIS A 5350:1991	Fiberglass reinforced plastic mortar pipes
JIS A 5405:1982	Asbestos cement pipes
JIS B 0100:1984	Glossary of terms for valves
JIS B 0116:1978	Glossary of terms for packings and gaskets
JIS B 0151:2001	Iron and steel pipe fittings — Vocabulary
JIS B 2001:1987	Nominal size and bore of valves
JIS B 2002:1987	Face-to-face and end-to-end dimensions of valves
JIS B 2003:1994	General rules for inspection of valves
JIS B 2004:1994	General rules for marking on valves
JIS B 2005:2004	Test procedures for flow coefficients of valves
JIS B 2007:1993	Industrial-process control valves — Inspection and routine testing
JIS B 2011:2003 / AMENDMENT 1:2004	Bronze gate, globe, angle, and check valves (Amendment 1)
JIS B 2031:1994	Gray cast iron valves
JIS B 2032:1995	Wafer type rubber-seated butterfly valves
JIS B 2051:1994	Malleable iron 10 K screwed valves
JIS B 2061:2004	Faucets, ball taps and flush valves
JIS B 2062:1994	Sluice valves for water works
JIS B 2063	Air vent valves for water works
JIS B 2064	Butterfly valves for water works
JIS B 2071:2000	Steel valves
JIS B 2191	Screwed bronze plug cocks and gland cocks
JIS B 2192	Threaded ends bronze packing plug valves
JIS B 2301:2004	Screwed type malleable cast iron pipe fittings
JIS B 2302:1998	Screwed type steel pipe fittings
JIS B 2303:1995	Screwed drainage fittings
JIS B 2311:1997	Steel butt-welding pipe fittings for ordinary use
JIS B 2312:1997	Steel butt-welding pipe fittings
JIS B 2313:1997	Steel plate butt-welding pipe fittings
JIS B 2316:1997	Steel socket-welding pipe fittings
JIS B 2321:1995	Aluminumand aluminum alloy butt-welding pipe fittings
JIS B 2351:1990	25 MPa (25 kgf/cm2) bite type tube fittings for hydraulic use
JIS B 2354:1991	Crosslinked polyethylene (XPE) pipe clamp type fittings
JIS B 2401:1999	O-rings
JIS B 2403:1995	V-packings
JIS B 2406:1991	O-rings housings — Design criteria
JIS B 6164:1996	Compression type tube fittings for machine tools
JIS B 8210:1994	Steam boilers and pressure vessels — Spring loaded safety valves
JIS B 8225:1993	Safety valves – measuring methods for coefficient of discharge
JIS B 8244:2004	Valves for dissolved acetylene cylinder
JIS B 8245:2004	Valves for liquefied petroleum gas cylinder
JIS B 8246:2004	Valves for high pressure gas cylinders
JIS B 8355:1997	Hydraulic fluid power — Subplate type solenoid operated four-port valves
JIS B 8357:2000	Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
JIS B 8372-1/2:2003	Pneumatic fluid power — Compressed air pressure regulators and filter-regulators –\nPart 1: Main characteristics to be included in literature from suppliers and product-making requirements\nPart 2: Test methods to determine the main characteristics to be included in literature from suppliers
JIS B 8373:1993	Pneumatic system — 2-port solenoid operated valves
JIS B 8374:1993	Pneumatic system — 3-port solenoid operated valves
JIS B 8375	Pneumatic system — 4-port and 5 port solenoid operated valves
JIS B 8376:1994	Speed control valves for pneumatic use
JIS B 8381:1995	Pneumatic system — Flexible tubes — Tube fittings
JIS B 8401:1999	Automatic steam traps
JIS B 8402:1993	Radiator traps
JIS B 8410:2004	Pressure reducing valves for water works
JIS B 8414:2004	Relief valves for hot water appliances
JIS B 8471:2004	Water pipe line — Solenoid valves
JIS B 8472:1994	Steam pipe line — Solenoid valves
JIS B 8473:1994	Fuel oil pipe line — Solenoid valves
JIS B 8602:2002	Pipe flanges for refrigerants
JIS B 8605:2002	Stop valves for refrigerants
JIS B 8607:2002	Flare type and brazing type fittings for refrigerants
JIS B 8619:1999	Thermostatic refrigerant expansion valves — Methods of testing for performance
JIS B 8651:2002	Test methods for electro-hydraulic proportional pressure relief valves
JIS B 8652:2002	Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves
JIS B 8653:2002	Test methods for electro-hydraulic proportional metering valves
JIS B 8654:2002	Test methods for electro-hydraulic proportional series flow control valves
JIS B 8655:2002	Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 8656:2002	Test methods for electro-hydraulic proportional bypass flow control valves
JIS B 8657:2002	Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8659-1/2:2000	Hydraulic fluid power — Electrically modulated hydraulic control valves\nPart 1: Test methods for four-way directional flow control valves\nPart 2: Test methods for three-way directional flow control valves
JIS C 8380:1993	Plastic coated steel pipes for cable-ways
JIS D 3607:1993	Automotive diesel engines – steel tubes for high-pressure fuel injection pipes
JIS E 4106:1994	Railway rolling stock – screwed type pipe fittings
JIS E 4115:1988	Magnet valves for railway rolling stock
JIS E 4308:1994	Railway rolling stock – air filters
JIS E 7701:1992	Safety valves for high pressure gas tank car tanks
JIS F 0014:2000	Glossary of terms for shipbuilding (hull part -piping)
JIS F 0301:1990	Schemes of thermal insulation of piping for small ships
JIS F 0414:1996	Shipbuilding – internal wiring and piping of engine control console
JIS F 0504:1989	Application and setting pressure of relief valves for ships’ machinery
JIS F 0506:1996	Shipbuilding – applications of copper pipes
JIS F 0507:1992	Small ships – steel pipes – application
JIS F 2007:1976	Mooring pipes
JIS F 2030:1978	Single point mooring pipes
JIS F 3016:1996	Shipbuilding – cast iron pipe sleeve type expansion joints
JIS F 3017:1996	Shipbuilding – cast steel pipe sleeve type expansion joints
JIS F 3024:1996	Shipbuilding — Deck stands for controlling valves
JIS F 3025:1996	Shipbuilding — Remote handling fittings for valves on small ships’ forepeak bulkhead
JIS F 3056:1995	Ships’ foot valves
JIS F 3057:1996	Bronze vertical storm valves
JIS F 3058:1996	Cast steel vertical storm valves
JIS F 3059:1996	Bronze screwdown vertical storm valves
JIS F 3060:1996	Cast steel screwdown vertical storm valves
JIS F 3993:1996	Discharge pipes for dredger
JIS F 3994:1996	Floaters of discharge pipes for dredger
JIS F 3995:1991	Rubber sleeves for dredge discharge pipes
JIS F 5610:1996	Shipbuilding — Forged steel 20K reflex type water gauges with valves for boilers
JIS F 5611:1996	Shipbuilding — Forged steel 63K transparent type water gauges with valves for boilers
JIS F 7007:1979	Abbreviation used in name plate for marine valve
JIS F 7008:1996	Standard specification of thermal insulation for piping
JIS F 7101:1993	Pipes of ship’s machinery – standard velocity of flow
JIS F 7102:1989	Application for gaskets and packing to piping system in machinery space
JIS F 7211:1996	Shipbuilding — 5K level gauges with valves
JIS F 7212:1996	Shipbuilding — Oil level gauges with self closing valves
JIS F 7213:1996	Shipbuilding — 16K water gauges with valve
JIS F 7216:1996	Shipbuilding — Self closing valves for oil level gauges
JIS F 7300:1996	Shipbuilding — Application for valves and cocks
JIS F 7301:1997	Shipbuilding — Bronze 5K globe valves
JIS F 7302:1997	Shipbuilding — Bronze 5K angle valves
JIS F 7304:1996	Shipbuilding — Bronze 16K angle valves
JIS F 7305:1996	Shipbuilding — Cast iron 5K globe valves
JIS F 7306:1996	Shipbuilding — Cast iron 5K angle valves
JIS F 7307:1996	Shipbuilding — Cast iron 10K globe valves
JIS F 7308:1996	Shipbuilding — Cast iron 10K angle valves
JIS F 7309:1996	Shipbuilding — Cast iron 16K globe valves
JIS F 7310:1996	Shipbuilding — Cast iron 16K angle valves
JIS F 7311:1996	Shipbuilding — Cast steel 5K globe valves
JIS F 7312:1996	Shipbuilding — Cast steel 5K angle valves
JIS F 7313:1996	Shipbuilding — Cast steel 20K globe valves
JIS F 7314:1996	Shipbuilding — Cast steel 20K angle valves
JIS F 7315:1996	Shipbuilding — Cast steel 30K globe valves
JIS F 7316:1996	Shipbuilding — Cast steel 30K angle valves
JIS F 7317:1996	Shipbuilding — Cast steel 40K globe valves
JIS F 7318:1996	Shipbuilding — Cast steel 40K angle valves
JIS F 7319:1996	Shipbuilding — Cast steel 10K globe valves
JIS F 7320:1996	Shipbuilding — Cast steel 10K angle valves
JIS F 7329:1996	Shipbuilding — Forged steel 40K globe valves
JIS F 7330:1996	Shipbuilding — Forged steel 40K angle valves
JIS F 7333:1996	Shipbuilding — Cast iron hose valves
JIS F 7334:1996	Shipbuilding — Bronze hose valves
JIS F 7336:1996	Shipbuilding — Forged steel globe air valves
JIS F 7337:1996	Shipbuilding — Forged steel angle air valves
JIS F 7340:1996	Shipbuilding — Cast steel globe air valves
JIS F 7341:1996	Shipbuilding — Forged steel 100K pressure gauge valves
JIS F 7346:1996	Shipbuilding — Bronze 5K globe valves (union bonnet type)
JIS F 7347:1996	Shipbuilding — Bronze 5K angle valves (union bonnet type)
JIS F 7348:1996	Shipbuilding — Bronze 16K globe valves (union bonnet type)
JIS F 7349:1996	Shipbuilding — Bronze 16K angle valves (union bonnet type)
JIS F 7350:1996	Shipbuilding — Hull cast steel angle valves
JIS F 7351:1996	Shipbuilding — Bronze 5K screw-down check globe valves
JIS F 7352:1996	Shipbuilding — Bronze 5K screw-down check angle valves
JIS F 7353:1996	Shipbuilding — Cast iron 5K screw-down check globe valves
JIS F 7354:1996	Shipbuilding — Cast iron 5K screw-down check angle valves
JIS F 7356:1996	Shipbuilding — Bronze 5K lift check valves
JIS F 7358:1996	Shipbuilding — Cast iron 5K lift check globe valves
JIS F 7359:1996	Shipbuilding — Cast iron 5K lift check angle valves
JIS F 7360:1996	Shipbuilding — Hull cast steel gate valves
JIS F 7363:1996	Shipbuilding — Cast iron 5K gate valves
JIS F 7364:1996	Shipbuilding — Cast iron 10K gate valves
JIS F 7365:1996	Shipbuilding — Hull cast steel globe valves
JIS F 7366:1996	Shipbuilding — Cast steel 10K gate valves
JIS F 7367:1996	Shipbuilding — Bronze 5K rising stem type gate valves
JIS F 7368:1996	Shipbuilding — Bronze 10K rising stem type gate valves
JIS F 7369:1996	Shipbuilding — Cast iron 16K gate valves
JIS F 7371:1996	Shipbuilding — Bronze 5K swing check valves
JIS F 7372:1996	Shipbuilding — Cast iron 5K swing check valves
JIS F 7373:1996	Shipbuilding — Cast iron 10K swing check valves
JIS F 7375:1996	Shipbuilding — Cast iron 10K screw-down check globe valves
JIS F 7376:1996	Shipbuilding — Cast iron 10K screw-down check angle valves
JIS F 7377:1996	Shipbuilding — Cast iron 16K screw-down check globe valves
JIS F 7378:1996	Shipbuilding — Cast iron 16K screw-down check angle valves
JIS F 7379:1996	Shipbuilding — Brass 30K stop valves with bite joint(s)
JIS F 7388:1996	Shipbuilding — Bronze 20K globe valves
JIS F 7389:1996	Shipbuilding — Bronze 20K angle valves
JIS F 7390:1996	Shipbuilding — Cocks with lock
JIS F 7398:1996	Shipbuilding — Fuel oil tank self-closing drain valves
JIS F 7399:2002	Ship building — Oil tank emergency shut-off valves
JIS F 7400:1996	Shipbuilding — Valves and cocks — General inspection requirement
JIS F 7403:1996	Shipbuilding — Hull bronze globe valves
JIS F 7404:1996	Shipbuilding — Hull bronze angle valves
JIS F 7409:1996	Shipbuilding — Bronze 16K screw-down check globe valves
JIS F 7410:1996	Shipbuilding — Bronze 16K screw-down check angle valves
JIS F 7411:1996	Shipbuilding — Bronze 5K screw-down check globe valves (Union bonnet type)
JIS F 7412:1996	Shipbuilding — Bronze 5K screw-down check angle valves (Union bonnet type)
JIS F 7413:1996	Shipbuilding — Bronze 16K screw-down check globe valves (Union bonnet type)
JIS F 7414:1996	Shipbuilding — Bronze 16K screw-down check angle valves (Union bonnet type)
JIS F 7415:1996	Shipbuilding — Bronze 5K lift check globe valves (Union bonnet type)
JIS F 7416:1996	Shipbuilding — Bronze 5K lift check angle valves (Union bonnet type)
JIS F 7417:1996	Shipbuilding — Bronze 16K lift check globe valves (Union bonnet type)
JIS F 7418:1996	Shipbuilding — Bronze 16K lift check angle valves (Union bonnet type)
JIS F 7421:1996	Shipbuilding — Forged steel 20K globe valves
JIS F 7422:1996	Shipbuilding — Forged steel 20K angle valves
JIS F 7425:1996	Shipbuilding — Cast iron valves
JIS F 7426:1996	Shipbuilding — Cast steel valves
JIS F 7435:1996	Shipbuilding – brass 30K unions with bite joints
JIS F 7436:1996	Shipbuilding – copper tube 10K brazed unions
JIS F 7437:1996	Shipbuilding – copper tube 10K screwed unions
JIS F 7438:1996	Shipbuilding – steel pipe 10K welding type unions
JIS F 7439:1996	Shipbuilding – steel pipe 10K screwed unions
JIS F 7440:1996	Shipbuilding – copper pipe 20K brazed type unions
JIS F 7441:1996	Shipbuilding – copper pipe 20K screwed unions
JIS F 7442:1996	Shipbuilding – steel pipe 40K welded unions
JIS F 7443:1996	Shipbuilding – steel pipe 40K screwed unions
JIS F 7444:1996	Shipbuilding – steel pipe 100K welded unions
JIS F 7445:1996	Shipbuilding – steel pipe 100K screwed unions
JIS F 7456:1999	Shipbuilding — Remote shut-off devices for fuel oil tank and lubricating oil tank emergency shut-off valves
JIS F 7457:1999	Shipbuilding — Pneumatically operated remote shut-off devices for fuel oil tank and lubricating oil tank emergency shut-off valves
JIS F 7471:1996	Shipbuilding — Cast steel 10K screw-down check globe valves
JIS F 7472:1996	Shipbuilding — Cast steel 10K screw-down check angle valves
JIS F 7473:1996	Shipbuilding — Cast steel 20K screw-down check globe valves
JIS F 7474:1996	Shipbuilding — Cast steel 20K screw-down check angle valves
JIS F 7480:1996	Shipbuilding — Rubber seat butterfly valves
JIS G 3429:1988	Seamless steel tubes for high pressure gas cylinder
JIS G 3439	Seamless steel oil well casing, tubing and drill pipe
JIS G 3441:2004	Alloy steel tubes for machine purposes
JIS G 3442:2004	Galvanized steel pipes for ordinary piping
JIS G 3443:2004	Coated steel pipes for water service
JIS G 3444:2004	Carbon steel tubes for general structural purposes
JIS G 3445:1988	Carbon steel tubes for machine structural purposes
JIS G 3446:1994	Stainless steel pipes for machine and structural purposes
JIS G 3447:2004	Stainless steel sanitary pipes
JIS G 3448:2004	Light gauge stainless steel tubes for ordinary piping
JIS G 3451:1987	Fittings of coated steel pipes for water service
JIS G 3452:2004	Carbon steel pipes for ordinary piping
JIS G 3454:1988	Carbon steel pipes for pressure service
JIS G 3455:1988	Carbon steel pipes for high pressure service
JIS G 3456:2004	Carbon steel pipes for high temperature service
JIS G 3457:1988	Arc welded carbon steel pipes
JIS G 3458:1988	Alloy steel pipes
JIS G 3459:2004	Stainless steel pipes
JIS G 3460:1988	Steel pipes for low temperature service
JIS G 3465:1988	Seamless steel tubes for drilling
JIS G 3466:1988	Carbon steel square pipes for general structural purposes
JIS G 3468, Publication date:2004-03-20	Large diameter welded stainless steel pipes
JIS G 3469:2002	Polyethylene coated steel pipes
JIS G 3471:1977	Corrugated steel pipes and sections
JIS G 3474:1995	High tensile strength steel tubes for tower structural purposes
JIS G 3491:2004	Asphalt protective coatings for steel water pipe
JIS G 3492:1993	Coal-tar enamel protective coatings for steel water pipe
JIS G 3561:1994	Oil tempered wire for valve springs
JIS G 4903:1991	Seamless nickel-chromium-iron alloy pipes
JIS G 5201:1991	Centrifugally cast steel pipes for welded structure
JIS G 5202:1991	Centrifugally cast steel pipes for high temperature and high pressure service
JIS G 5525:2000	Cast-iron drainage pipes and fittings
JIS G 5526:1998	Ductile iron pipes
JIS G 5527:1998	Ductile iron fittings
JIS G 5528:1984	Epoxy-powder coating for interior of ductile iron pipes and fittings
JIS H 0502:1986	Method of eddy current testing for copper and copper alloy pipes and tubes
JIS H 0515:1992	Eddy current inspection of titanium pipes and tubes
JIS H 0516:1992	Ultrasonic inspection of titanium pipes and tubes
JIS H 3300:1997	Copper and copper alloy seamless pipes and tubes
JIS H 3320:1992	Copper and copper alloy welded pipes and tubes
JIS H 3401:2001	Pipe fittings of copper and copper alloys
JIS H 4080:1999	Aluminum and aluminum alloys extruded tubes and cold-drawn tubes
JIS H 4090:1990	Aluminum and aluminum alloy welded pipes and tubes
JIS H 4202:1998	Magnesium alloy seamless pipes and tubes
JIS H 4311:1993	Lead and lead alloy tubes for common industries
JIS H 4312:2000	Polyethylene lining lead pipes for water supply
JIS H 4552:2000	Nickel and nickel alloy seamless pipes and tubes
JIS H 4630:2001	Titanium and titanium alloy seamless pipes
JIS H 4635:2001	Titanium and titanium alloy welded pipes
JIS K 6739:2004	Unplasticized poly(vinyl chloride) (PVC-U) pipe fittings for drain
JIS K 6741:2004	Unplasticized poly(vinyl chloride) (PVC-U) pipes
JIS K 6742:2004	Unplasticized poly(vinyl chloride) (PVC-U) pipes for water supply
JIS K 6743:2004	Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for water supply
JIS K 6761:2004	Polyethylene pipes for General Purposes
JIS K 6762:2004	Double wall polyethylene pipes for water supply
JIS K 6769:2004	Crosslinked polyethylene (PE-X) pipes
JIS K 6770:2004	Crosslinked polyethylene (PE-X) pipe fittings
JIS K 6774:1998	Polyethylene pipes for the supply of gaseous fuels
JIS K 6775-1:1998	Polyethylene pipe-fittings for the supply of gaseous fuels — Part 1: Heatfusion fittings
JIS K 6775-2:1998	Polyethylene pipe-fittings for the supply of gaseous fuels — Part 2: Spigot fittings
JIS K 6775-3:1998	Polyethylene pipe-fittings for the supply of gaseous fuels — Part 3: Electrofusion fittings
JIS K 6776:2004	Chlorinated poly(vinyl chloride) (PVC-C) pipes for hot and cold water supply
JIS K 6777:2004	Chlorinated poly(vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply
JIS K 6778:2004	Polybutene (PB) pipes
JIS K 6779:2004	Polybutene (PB) pipe fittings
JIS K 6897:1995	Polyetrafluoroethylene pipes
JIS R 1201:1991	Clay pipes
JIS R 1511:1991	Conical flanged straight pipes of acid proof porcelains for chemical industry
JIS R 1512:1991	Conical flanged 90 degrees bent pipes of acid proof porcelains for chemical industry
JIS R 1513:1991	Conical flanged 45 degrees bent pipes of acid proof porcelains for chemical industry
JIS R 1514:1991	Conical flanged tee pipes pipes of acid proof porcelains for chemical industry
JIS R 1534:1991	Metal joint for conical flanged pipes of acid proof porcelains for chemical industry
JIS S 2080:1994	Exhaust pipes for burning appliances
JIS S 2120:2000	Gas valves
JIS S 2150:1993	Manually operated gas valves for gas appliances
JIS S 2151:1993	Automatic gas valves for gas appliances
JIS S 3019:1997	Oil control valves for oil burning appliances
JIS S 3028:1994	Oil discharge copper pipe for oil burning appliances
JIS T 7101:1993	Medical gas pipeline systems
JIS T 9211:1990	Pipes for endoskeletal type of lower limb prostheses
JIS Z 1604:1995	Plugs and flanges for steel drums

by PipeAdmin
Tags: acronyms, electrical, Electrician