Mechanical Joint Crosses – Full Body, AWWA C110, DI (in)

Pipe SizeDimensions (in)Approx. Weight (lb)
RunBranchJKMJ*  MJ x FLG
6 6 8.0 8.0 160 141
8 4 9.0 9.0 185 –
8 6 9.0 9.0 205 182
8 8 9.0 9.0 255 245
10 6 11.0 10.0 285 –
10 8 11.0 11.0 310 –
10 10 11.0 11.0 380 360
12 6 12.0 12.0 361 367
12 8 12.0 12.0 371 373
12 12 12.0 12.0 486 487
14 8 14.0 14.0 550 –
14 14 14.0 14.0 779 –
16 6 15.0 15.0 650 –
16 8 15.0 15.0 675 655
16 16 15.0 15.0 895 875
18 8 13.0 15.5 775 –
18 10 13.0 15.5 760 –
18 12 13.0 15.5 860 –
18 18 16.5 16.5 1140 –
20 8 14.0 17.0 951 –
20 12 14.0 17.0 977 –
20 16 18.0 18.0 1245 –
20 20 18.0 18.0 1440 –
24 8 15.0 19.0 1244 –
24 12 15.0 19.0 1326 –
24 16 15.0 19.0 1479 –
24 20 22.0 22.0 1965 –
24 24 22.0 22.0 2192 –
30 6 18.0 23.0 2085 –
30 12 18.0 23.0 2165 –
30 24 25.0 25.0 3180 –
30 30 25.0 25.0 3640 –
36 24 20.0 26.0 2910 –
36 36 28.0 28.0 4370 –
42 42 31.0 31.0 7145 –
48 24 26.0 34.0 5210 –
48 36 34.0 34.0 6790 –
48 48 34.0 34.0 9380 –
  • *  These fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

error: Copy is disabled