Mechanical Joint 11 1/4 Bends – Full Body, AWWA C110, DI (in)

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
3 15.25 3.0 11.0 30 – –
4 20.31 4.0 12.0 52 – –
6 30.50 5.0 13.0 65 71 –
8 35.50 5.5 13.5 104 105 –
10 45.69 6.5 14.5 171 – –
12 55.81 7.5 15.5 221 215 –
14 50.75 7.5 15.5 305 – –
16 55.81 8.0 16.0 391 367 –
18 60.94 8.5 16.5 525 422 –
20 71.06 9.5 17.5 605 – –
24 76.12 11.0 19.0 996 800 972
30 116.75 15.0 23.0 1410 – 1305
36 147.25 18.0 26.0 2397 – 2185
42 177.69 21.0 – 3035 – –
48 208.12 24.0 – 4190 – –
  • For flange dimensions see Flange – ANSI Class 125, C110, DI
  • AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
  • ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ – mechanical joint
  • PE – plain end
  • FLG – flange
by
Tags: , , , , , , , ,

error: Copy is disabled